Within the framework of the notification mentioned above please find attached the

Transcription

1 to 1. European Commission DG GROW C1.001 Clean Technologies and s.sustainable Construction 2. Nando-Administration and Notifying Authorities according to Nando - Name/Direct dialing: DI Josef Karner/8260 Business Number: BMWFW /0051-I/11/2015 Notification Regulation (EU) No 305/2011 (Construction s) Austria, NB 1086 Supplementary list of technical specifications for Article 66(4), Dear Ladies and Gentlemen! Within the framework of the notification mentioned above please find attached the - supplementary list of technical specifications for Article 66(4) - see Attachment 2/2. As an accreditation certificate is used an objection to this notification may be raised within a period of two weeks according to Art of Regulation (EU) No 305/2011, Construction s Regulation (CPR), starting from the date of this notification. Any other information is encoded in parallel in Nando (preliminary notification), if possible - see Attachment 1/2. With reference to the document "IMPLEMENTATION OF CPR Art 66(4) NOTIFYING BODIES FOR EUROPEAN TECHNICAL APPROVALS ISSUED LATE BEFORE 01/07/2013" the European Commission is requested to make this information available on its website to any interested stakeholders, respectively to make publicly available according to Article 49.2 of the CPR. Attachment 1/2: Notification form encoded in Nando Attachment 2/2: Supplementary list of technical specifications - Art of CPR Best regards Vienna, For the Federal Minister: Dipl.-Ing. Josef Karner Stubenring Vienna Austria phone: +43 (0) fax: +43 (0) DVR post.i11@bmwfw.gv.at page 1 of 2

2 Unterzeichner Bundesministerium für Wissenschaft, Forschung und Wirtschaft Datum/Zeit Aussteller-Zertifikat Serien-Nr Hinweis T08:45:49+02:00 CN=a-sign-corporate-light-02,OU=a-sign-corporate-light-02,O=A- Trust Ges. f. Sicherheitssysteme im elektr. Datenverkehr GmbH, C=AT Dieses Dokument wurde amtssigniert. Prüfinformation Informationen zur Prüfung der elektronischen Signatur finden Sie unter: Die Bildmarke und Hinweise zur Verifikation eines Papierausdrucks sind auf oder veröffentlicht. Signaturwert txnzuggga0rihwy5+1etmqixr7nuwztmz3qba/llrj+lgyp4kfec9iddt6h4xnfpegx7aqiee+h59kvieilvzrf1 zv1ckl4phytq/oja1s64irdovd2cqzhzdmnitvllxywz9v3fxc5zeogdurnnjd6ucfl+xrtwybde5k0albig8r5u HksnazEcauolsM0sQrLLgpsONra02U9ZMntNhlw9Jo6zGWC6sYLYE2QriDKK/JdHNagzzlSqU+c07q0NBSFEIAZP Rv4LfBymYxWzav0qE9FvUiwC7IyM/C7fhwkQ9NyYPDVJzsMhEeVhRvVdU5AAHWNUXalwwcNSvn6jjQ== BMWFW /0051-I/11/2015 page 2 of 2

3 Designation of a Notified Body pursuant to the Construction s Regulation From : Bundesministerium für Wissenschaft, Forschung und Wirtschaft - Abteilung I/11 Stubenring 1 A-1011 Wien Austria To : European Commission GROWTH Directorate-General 200 Rue de la Loi, B-1049 Brussels. Other Member States Reference : Regulation (EU) No 305/ Construction products Body name, address, telephone, fax, , website : Bautechnische Versuchs- und Forschungsanstalt Salzburg Alpenstrasse SALZBURG Austria Phone : +43(662) Fax : info@bvfs.at Website : Body : NB 1086 Created : Unknown (Notifications pre-dating 2006 are not available in these lists) Last update : 28/10/2013 Period of validity of the notification : Valid until : Unlimited The body is formally accredited. Name of National Accreditation Body (NAB) : AKKREDITIERUNG AUSTRIA The NAB is a signatory to the following parts of the EA/MLA relevant to this notification : Calibration Testing Inspection certification QMS (Quality System certification) Personnel certification EMS (Environment management systems certification) The body is formally accredited against : EN EN ISO/IEC EN EN ISO/IEC The accreditation is valid until : 31/12/2030 The body is member of the following Notified Bodies' co-ordination group(s) : Construction s (advisory group) Construction-Sector Group 1 / 3

4 Authorised contact person(s) in Body Name, direct telephone, and personal Mr. N. Glantschnigg - +43(662) glantschnigg@bvfs.at Tasks performed by the Body Decision family, product/intended use AVCP system Technical specification 97/176/EC Structural timber products (1/3) : Solid structural timber products: Elements (bridge elements, truss elements, sleepers, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (bridges, railtracks and buildings). 97/555/EC Cements, building limes and other hydraulic binders : Common cements, including: -Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products). 97/555/EC Cements, building limes and other hydraulic binders : Masonry cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products). 97/555/EC 97/556/EC 97/556/EC 97/740/EC 97/740/EC Cements, building limes and other hydraulic binders : Building limes, including: -Calcium limes, -Dolomitic limes, -Hydraulic limes (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products). External thermal insulation composite systems/kits with rendering (ETICS)(1/1) : External thermal insulation composite systems/kits with rendering (ETICS) (in external wall subject to fire regulations). External thermal insulation composite systems/kits with rendering (ETICS)(1/1) : External thermal insulation composite systems/kits with rendering (ETICS) (in external wall not subject to fire regulations), External thermal insulation composite systems/kits with rendering (ETICS) (in external wall subject to fire regulations). Masonry and related products (1/3) : Masonry units category I (in walls, columns and partitions). Masonry and related products (1/3) : Factory-made, designed masonry mortars (in walls, columns and partitions). Aggregates and fillers for concrete, mortar and grout (in buildings, roads and other civil engineering work). Fillers for bituminous mixtures and surface treatments (for roads and other civil engineering works), Aggregates for (System 1+) (System 1+) (System 1) EN :2005+A1:2011 EN 197-1:2011 EN 413-1:2011 EN 459-1:2010 ETAG Art 66(3) ETAG Art 66(3) EN 771-1:2011 EN 771-2:2011 EN 771-3:2011 EN 771-4:2011 EN 771-5:2011 EN 998-2:2010 EN 12620:2002+A1:2008 EN :2002 EN :2002/AC:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13043:2002 EN 13043:2002/AC: / 3

5 Decision family, product/intended use AVCP system Technical specification bituminous mixtures and surface treatments (for roads and other civil engineering works). Aggregates for unbound and hydraulically bound mixtures (for roads and other civil engineering works). Railway ballast (for railway works). 99/469/EC s related to concrete, mortar and grout (1/2) : Fibres (for other uses in concrete, mortar and grout). 99/469/EC s related to concrete, mortar and grout (1/2) : Concrete protection and repair products (for other uses in buildings and civil engineering works). 99/470/EC 99/91/EC 99/91/EC 99/94/EC Construction adhesives (1/2) : Adhesives for tiles (for internal and external uses in buildings and other civil engineering works). Thermal insulating products (1/2) : Thermal insulating products (factory-made products and products intended to be formed in-situ) (any). Thermal insulating products (2/2) : Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire). Precast normal/lightweight/autoclaved aerated concrete products (1/1) : Precast normal/lightweight/autoclaved aerated concrete products (for structural use). Testing Laboratory (System 3) Testing Laboratory (System 3) Testing Laboratory (System 3) (System 1) EN 13242:2002+A1:2007 EN 13450:2002 EN 13450:2002/AC:2004 EN :2006 EN :2004 EN :2005 EN :2004 EN 12004:2007+A1:2012 EN 13162:2012+A1:2015 EN 13163:2012+A1:2015 EN 13164:2012+A1:2015 EN 13165:2012+A1:2015 EN 13166:2012+A1:2015 EN 13167:2012+A1:2015 EN 13168:2012+A1:2015 EN 13169:2012+A1:2015 EN 13170:2012+A1:2015 EN 13171:2012+A1:2015 EN :2010 EN 13162:2012+A1:2015 EN 13163:2012+A1:2015 EN 13168:2012+A1:2015 EN 1168:2005+A3:2011 EN 13224:2011 EN 13747:2005+A2:2010 EN 14843:2007 EN 14844:2006+A2:2011 EN 14991:2007 EN 14992:2007+A1:2012 EN 15050:2007+A1:2012 EN 13225: / 3

6 Attachment 2/2 to BMWFW /0051-I/11/2015 Notification Authority Bundesministerium für Wissenschaft, Forschung und Wirtschaft - Abteilung I/11 Stubenring 1 A-1011 Wien Austria Post.i11@bmwfw.gv.at Legislation: Regulation (EU) No 305/ Construction products Notified Body number 1086 Created parallel to Nando encoding Tasks performed by the Body: List of technical specifications supplementary to technical specifications encoded in Nando - Article 66.4 (Period of validity of ETAs according to EOTA website) Decision family, product/intended use AVCP system Technical specification 97/176/EC Structural Timber s PC Certification Body (System 1) ETA- 13/0083:2013 Seite 1/1