Luxwood Building System
|
|
- Alexia Park
- 6 years ago
- Views:
Transcription
1 Certificate number: CM40214 THIS TO CERTIFY THAT Certification Body: ABN: JAS-ANZ Accreditation No. Z AK PO Box 7144, Sippy Downs Qld (07) Certificate Holder: PHE Solutions Pty Ltd ABN: Collins Street, Benowa QLD 4217 Ph: Type and/or use of product: The Luxwood Building System is an Engineered structural building system, assembled on site consisting of walls, floors and ceilings, upto 3 storey high, type C construction. Performance Requirement(s) Luxwood Building System Description of product: The Luxwood Building System is an Engineered prefabricated building system consisting of Luxwood panels and POLEX board. Refer A2 for more information. COMPLIES WITH THE FOLLOWING BCA PROVISIONS AND STATE OR TERRITORY VARIATION(S) BCA 2016 Volume One BP1.1 (a) FP1.4 FP5.2 (a) Structural reliability (c) Weatherproofing Walls (d) Deemed-to-Satisfy Provision(s): J1.5 Building Fabric walls (f) Volume Two P2.1.1 (a) P2.2.2 P2.4.6 (a) (a) (a) Structural stability and resistance to actions (c) Weatherproofing Sound insulation (d) Building fabric thermal insulation (f) Building fabric - External walls (f) State or territory variation(s): NT Part F5 NT P2.4.6 SUBJECT TO THE FOLLOWING LIMITATIONS AND CONDITIONS AND THE PRODUCT TECHNICAL DATA IN APPENDIX A AND EVALUATION STATEMENTS IN APPENDIX B Limitations and conditions: a. The Luxwood Building System must be installed in accordance with the Luxwood Panel Building System Methods & Guideline Installation Manual Rev1. b. Flooring Loads must be designed by a suitably licensed Engineer in accordance with AS/NZS :2002 Reference Values of Imposed Floor Actions. c. The Luxwood Building System is not permitted for use in Cyclonic regions unless designed and approved by a suitably licensed Engineer in accordance with AS Building classification/s: Class 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 Date of issue: 20/06/2017 John Thorpe - CMI Don Grehan Unrestricted Building Certifier Date of expiry: 20/06/2020 Certificate number: CM40214 This certificate is only valid when reproduced in its entirety. Page 1 of 5
2 d. The Luxwood Building System achieves a minimum Acoustic Performance of Rw/Rw+Ctr 47/44db for walls and floors. Where required, the system may be deigned to achieve Rw/Rw+Ctr 55/52db or higher. For further details, see the Luxwood Building System Methods Guideline and Installation Manual Rev1. e. Fire Resistance provisions do not form part of this certification. If a Fire Resistance is required, contact the Certificate Holder. f. Thermal Resistance provisions J1.5, (a) and (a) only applies for climate zones 1 to 7. g. This certification relates only to the product as described above, and must be read, considered and used as a whole document it may be considered misleading and will be incomplete to be selective. Scope of certification: The CodeMark Scheme is a building product certification scheme. The rules of the Scheme are available at the ABCB website This Certificate of Conformity is to confirm that the relevant requirements of the Building Code of Australia (BCA) as claimed against have been met. The responsibility for the product performance and its fitness for the intended use remain with the certificate holder. The certification is not transferrable to a manufacturer not listed on Appendix A of this certificate. Disclaimer: The Scheme Owner, Scheme Administrator and Scheme Accreditation Body do not make any representations, warranties or guarantees, and accept no legal liability whatsoever arising from or connected to, the accuracy, reliability, currency or completeness of any material contained within this certificate; and the Scheme Owner, Scheme Administrator and Scheme Accreditation Body disclaim to the extent permitted by law, all liability (including negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this certificate. Certificate number: CM40214 This certificate is only valid when reproduced in its entirety. Page 2 of 5
3 APPENDIX A PRODUCT TECHNICAL DATA A1 Type and intended use of product As per page 1. A2 Description of product A full system may include: Wall / Floor Panel; Wall Corners; U Channel; Roof Trusses and Frames; Fastening; POLEX Boards; Window and Door Frames; External Cladding; Ceiling System. Please refer to the Luxwood Panel Building System Methods & Guideline Installation Manual Rev1 for further details. Luxwood Panels Standard Thickness: 100mm Width: 450mm Length: 300mm up to 3000mm. POLEX Boards P1 - Compressed 1220mm x 2440mm x 9mm weatherproof sheets (grey). Used as a wall or floor substrate. P2 - Compressed 1220mm x 2440mm x 9mm weatherproof sheets (white). Used as an internal and external wall or soffit substrate when rendered and painted upto approx. 10mm thick. P3 - Aerated paper faced 1200mm x 2400mm x 10mm sheets (green). Used as a substitute for plasterboard for walls and ceilings. Wall / Floor Panel Wall Corners U Channel Roof Trusses and Frames Certificate number: CM40214 This certificate is only valid when reproduced in its entirety. Page 3 of 5
4 Fastening POLEX Boards Window and Door Frames External Cladding Ceiling System A3 Product specification Structural ability and resistance to action: Description Compressive strength Hanging force Results 6.3 MPa 1000N Certificate number: CM40214 This certificate is only valid when reproduced in its entirety. Page 4 of 5
5 Flexure strength rate 0.98 A4 Manufacturer and manufacturing plant(s) Beijing Hengtong Innovation Luxwood Technology Co. Ltd No.86-5, Wanxing Rd, Changyang, Fangshan District, Beijing, China, A5 Installation requirements 1. The Luxwood Building System must be designed by a suitably qualified Engineer and installed by a competent person/s as deemed by PHE Solutions Pty Ltd. A6 Other relevant technical data Nil APPENDIX B EVALUATION STATEMENTS B1 Evaluation methods 1. Structural Provision A2.2 (a)(iii) & (b) and (a)(iii) & (b). A certificate from a professional engineer. 2. Damp and Weatherproofing A2.2 (a)(iii) & (b) and (a)(iii) and (b). A certificate from a professional engineer. 3. Thermal Provision A2.2 (a)(iii) & (b) and (a)(iii) & (b). A certificate from a professional engineer. 4. Acoustic Provision A2.2 (a)(iii) and (a)(iii). A certificate from a professional engineer. B2 Reports 1. Graeme Moulston & Associates Engineering Performance Certification Report No. 1041_001, Structural provisions in accordance with AS/NZS : Graeme Moulston & Associates Engineering Performance Certification Report No MW & , Acoustic performance. 3. Ben Van Zly PhD MSc (Eng) Report No. G1321, Luxwood Subfloor & Wall System Assessment of Acoustic Performance. 4. Graeme Moulston & Associates Engineering Report No. 1045_001, Performance Certification for Thermal Performance. 5. Graeme Moulston & Associates Engineering Report No. 1046_001, Performance for Water Penetration. 6. Petrovic Engineering Letter of Appraisal No dated Product meets requirements for: Structural provision and Energy efficiency. Certificate number: CM40214 This certificate is only valid when reproduced in its entirety. Page 5 of 5
Certificate number: CM40087 Rev3
Certification Body: ABN: 80 111 217 568 JAS-ANZ Accreditation No. Z4450210AK PO Box 7144, Sippy Downs Qld 4556 +61 (07) 5445 2199 www.certmark.org Certificate Holder: ABN: 22 750 783 065 19 Lowermill Rd,
More informationADVISORY NOTE Fire Performance of External Walls and Cladding Application
ADVISORY NOTE 2016-3 Fire Performance of External Walls and Cladding Application NCC Volume: Section/Part: One Various Date first issued: August 2016 Date revised: September 2016 Copyright and licence
More informationEvaluation Report. for. Empire West, Inc Graton Road Post Office Box 511 Graton, California 95444
for Empire West, Inc. 9270 Graton Road Post Office Box 511 Graton, California 95444 CertMark International Pty Ltd (CMI) has awarded this Certification to the company named above for the Product/system
More informationSEPARATING WALLS CLASS 1A
TECHNICAL DATA SHEET ISSUED BY TIMBER QUEENSLAND SEPARATING WALLS CLASS 1A (DUPLEXES, TOWNHOUSES, BUILDINGS ROW HOUSES, TERRACE HOUSES) 33 RECOMMENDED PRACTICE // AUGUST 2014 Fire and sound are important
More informationBuilding regulations now in force
BCA Section J: Guide to compliance Publication date July 2008 Building regulations now in force BCA SECTION J: Mandatory energy efficiency measures for non-residential construction The new BCA Section
More informationA GUIDE TO WINDOW AND DOOR SELECTION
Australian window association guide series A GUIDE TO WINDOW AND DOOR SELECTION An industry guide to the selection and certification of windows and doors Background Foreword As part of its commitment to
More informationCertMark Australasia CodeMark Assessment Brief' THE OZONE PANEL BUILDING SYSTEM. For
CertMark Australasia CodeMark Assessment Brief' For THE OZONE PANEL BUILDING SYSTEM PURPOSE Ozone Panels are load bearing precast panels made up of two facades of OSB3 composite sourced from organically
More informationN1 to N3. DuraGalPlus Domestic Construction Manual. Volume 2: DuraGalPlus RHS as lintels (garage beams, window heads)
N1 to N3 Domestic Construction Manual Volume 2: RHS as lintels (garage beams, window heads) Domestic Construction Manual Volume 1: Roof beams - N1 to C3 (N1 to C3 - Rafters) (N1 to N3 - Roof beams, strutting
More informationN1 to N3. DuraGalPlus Domestic Construction Manual. Volume 3: DuraGalPlus RHS as floor beams (bearers)
N1 to N3 Domestic Construction Manual Volume 3: RHS as floor beams (bearers) DuraGal Domestic Construction Manual Volume 1: Roof beams - N1 to C3 (N1 to C3 - Rafters) (N1 to N3 - Roof beams, strutting
More informationSOLITEX EXTASANA WALL PROTECTION MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 822 [2013] Appraisal No. 822 (2013) Amended 06 May 2014
SOLITEX EXTASANA WALL PROTECTION MEMBRANE Amended 06 May 2014 BRANZ Appraisals Technical Assessments of products for building and construction. Pro Clima Australia Pty Ltd PO Box 924 Gosford NSW 2250 Australia
More informationBCA Section J Compliance Report. Alterations & Additions to Cottage at St Johns College 10 Missenden Road Camperdown
BCA Section J Compliance Report Alterations & Additions to Cottage at St Johns College 10 Missenden Road Camperdown Prepared by: Gradwell Consulting ABN 68 872 791 784 Sustainability Consultants PO Box
More informationMaxiWall Low-Rise Multi Residential External Wall System
MaxiWall Low-Rise Multi Residential External Wall System Technical Guide Our Story With over 110 years in the timber industry, Big River is now one of Australia s largest timber manufacturing and marketing
More informatione x a n g l e installation guide exangle Finishing Sections
e x a n g l e installation guide exangle Finishing Sections rondo exangle Finishing Sections CORNER BEADS 90º external corner beads are available in two profiles. Use P01 for a sharper finish or P32 for
More informationWALL LINER PRODUCT DATA SHEET FAÇADE & ROOF SYSTEMS
WALL LINER PRODUCT DATA SHEET FAÇADE & ROOF SYSTEMS INTRODUCTION BENCHMARK Wall Liner is an engineered insulated panel system that is ideal for fully supporting single skin metal sheeting such as zinc,
More informationFinish coat painted with a 100% acrylic. Multi purpose scratch coat
Finish coat painted with a 100% acrylic Multi purpose scratch coat 200mm self-adhesi ve mesh coated with insulclad base 40mm P VC washers and class 3 screws spaced at 300mm INSULCLAD DIRECT FIXED CLADDING
More informationGalintel Steel Lintels
Galintel Steel Lintels selection guide & load tables Galintel pty ltd Galintel Pty Ltd A division of the Graham Group An Australian owned Company with more than 50 years experience The Graham Group is
More informationInsulwhite. Insulation WHITE-FACED THERMO REFLECTIVE INSULATION
Insulation A4/6 TB055W AW2244 Issue 6 Oct 2017 WHITE-FACED THERMO REFLECTIVE INSULATION Innovative cross-linked closed cell insulation core 3-in-1 Insulation, vapour barrier and radiant barrier Helps achieve
More informationBuilding Regulations
Product 1.1 Technobond is a range of polyester fibre insulation used as thermal and acoustic insulating material in ceilings, roofs and walls of buildings. Appraisal No.69 [010] BRANZ Appraisals Technical
More informationGTEK TM SOUND GTEK TM IMPACT
APRIL 2016 TECHNICAL BROCHURE GTEK TM SOUND GTEK TM IMPACT gtekplasterboard.com.au GTEK TM SOUND WHY GTEK TM? WITH OUR ALL-AUSTRALIAN GTEK RANGE OF INTERIOR LINING PRODUCTS, YOU BENEFIT FROM SUSTAINABLE,
More informationBrick Veneer Walls. Insulation
Insulation A4/8 BV AW2157 Issue 7 Nov 2016 Brick Veneer Walls Insulation guide Helps achieve a 6-star house energy rating Rigid Kingspan Kooltherm and flexible Kingspan AIR-CELL solutions available Fibre-free,
More informationexangle installation guide EXANGLE Finishing Sections
exangle installation guide EXANGLE Finishing Sections rondo exangle FINISHING SECTIONS GENERAL INFORMATION The Rondo EXANGLE and EXANGLE Render & Texture range has been developed over 45 years by Rondo
More informationGreat Ocean Rd Ice Creamery
Great Ocean Rd Ice Creamery BCA Section J - JV3 Compliance Report Revision: 01 Job No: 2171 Date: 7 July 2015 ADP Consulting Pty Ltd Level 10, 10 Queens Rd, Melbourne Vic 3004 www.adpconsulting.com.au
More informationInsulbreak. Insulation. thermal break solution
Insulation A4/8 TB AW2199 Issue 8 May 2017 Insulbreak thermal break solution 3-in-1 Insulation, thermal break and vapour barrier Delivers a R0.20 thermal break solution for steel-framed construction Helps
More informationRoof Systems. Span Tables & Thermal Ratings. Custom Roof Panel
Roof Systems Custom Roof Panel Tables & Thermal Ratings Version 2015.02 A fully customised and complete roofing solution that is quick to install with superior span and cantilever capabilities. UP TO CMA-CM40091
More informationHYDRATHANE INTERIOR WATERPROOFING MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 959 [2017] Appraisal No. 959 (2017) BRANZ Appraisals
Appraisal No. 959 [2017] HYDRATHANE INTERIOR WATERPROOFING MEMBRANE BRANZ Appraisals Technical Assessments of products for building and construction. Construction Chemicals Pty Ltd 49-57 Davis Street Wingfield
More informationTimber-framed Construction for Commercial Buildings Class 5, 6, 9a & 9b
03 Seaford Life Saving Club, Robert Simeoni Pty Ltd Architects Timber-framed Construction for Commercial Buildings Class 5, 6, 9a & 9b Design and construction guide for BCA compliant sound and fire-rated
More informationCity of High Point Airport Overlay District Noise Level Reduction Design Standards
City of High Point Airport Overlay District Noise Level Reduction Design Standards Part A. Residential Design Standards for Zone 3 I. NOISE LEVEL REDUCTION (NLR) REQUIREMENT FOR ZONE 3. The City of High
More informationexangle installation guide EXANGLE Finishing Sections
exangle installation guide EXANGLE Finishing Sections rondo exangle FINISHING SECTIONS GENERAL INFORMATION The Rondo EXANGLE and EXANGLE Render & Texture range has been developed over 45 years by Rondo
More informationClarifying the Fenestration Energy Performance requirement in the Ontario Building Code Supplementary Standard SB12
Clarifying the Fenestration Energy Performance requirement in the Ontario Building Code Supplementary Standard SB12 February 2012 Legal Notice - Disclaimer and exclusion of liability This document is provided
More informationInsuliner. Insulation REFLECTIVE INSULATION FOR USE WHERE
Insulation A4/8 TB055G2 AW2235 Issue 8 Sep 2017 Insuliner REFLECTIVE INSULATION FOR USE WHERE it acts as the WALL OR CEILING LINING Group 2 NCC fire classification Designed for warehouses and commercial
More informationRetroshield XL TM. Insulation THERMO REFLECTIVE INSULATION
Insulation A4/6 TB055F AW2002 Issue 4 Sept 2015 THERMO REFLECTIVE INSULATION Innovative cross-linked closed-cell insulation core Improved Class 0 fire performance to stringent international standards 3-in-1
More informationFire Safety and Performance of Wood in Multi-Residential and Commercial Buildings. Boris Iskra Forest & Wood Products Australia
Fire Safety and Performance of Wood in Multi-Residential and Commercial Buildings Boris Iskra Forest & Wood Products Australia This Presentation 1. Fire Hazard Properties Building Code of Australia Volume
More information1 Product. 2 Scope of Use. IGNIS PERFORMANCE SOLUTION No I01R01. Ritek XL Thermal Wall System
IGNIS PERFORMANCE SOLUTION Evaluation No.4214 [2016] 1 Product Ignis Solutions has been engaged by Ritek Building Solutions to evaluate compliance of their Ritek XL Thermal Wall System against the Building
More informationEDITION: MAY 2016 DESIGN AND INSTALLATION GUIDE
FLOORING SYSTEM 50mm, 62mm and 75mm EDITION: MAY 2016 DESIGN AND INSTALLATION GUIDE CMA-CM40172 HEAD OFFICE Nasahi Building Materials Australia Pty Ltd 1331 Stud Rd, Rowville, Victoria, 3181 P: 1300 2
More informationQuick guide to product substitution
Quick guide to product substitution p1 of 12 Contents Use of this guide... 2 Purpose... 3 Introduction... 3 Step 1: Consider the law... 5 Step 2: Consider the building implications... 7 Step 3: Implement
More informationControlled Environments. Product Data Sheet. Controlled Environment Panel System KS1100 CS
Controlled Environments Controlled Environment Panel System KS1100 CS Overview Kingspan controlled environment panel systems are designed for use within temperature controlled and hygiene safe environments
More informationExternal Steel Stud and Top Hat Walls. Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185
Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185 GENERAL REQUIREMENTS 185 FRAMING 185 PLASTERBOARD LAYOUT 189 PLASTERBOARD FIXING 190 EXTERIOR
More informationCHAPTER 3: Modern Methods of Construction (MMC)
CONTENTS 3.1.1 INTRODUCTION 3.1.2 SUITABILITY OF SYSTEMS AND COMPONENTS 3.1.3 TYPES OF MODERN METHODS OF CONSTRUCTION (MMC) 3.1.4 SUITABILITY OF SYSTEMS TO MEET WARRANTY REQUIREMENTS 3.1.5 INSULATED CONCRETE
More information19 New-type Antiseismic and Energy-Saving Building
19 New-type Antiseismic and Energy-Saving Building Q.Li, Q.Cui, Y.Cui, D.Wong China Building Academy, China Abstract: This paper introduces a new-type of anti-seismic and energy-saving building system
More informationPosition Statement. Product compliance and evidence of suitability
Version 1 Approved for release July 2014 1.0 FPA Australia advocates the following in relation to product compliance and for fire protection products used in Australia: Fit for purpose 1. Fire protection
More informationFIRMLOK FLOORING SYSTEM DESIGN AND INSTALLATION MANUAL
FLOORING SYSTEM DESIGN AND INSTALLATION MANUAL NON-CYCLONIC AREAS LYSAGHT Introduction LYSAGHT STRUCTURAL BEAMS structural beams consist of two interlocking c-sections. They are light, strong and universal
More informationWalling System. Very Quick. Very Easy
Walling System Very Quick. Very Easy Walling System The Versaloc Walling System is a new Dry Stack walling system from Adbri Masonry which creates significant productivity gains, by allowing units to be
More informationWhen demanding consistent quality, specify FIRM-FILL SCM-250 to assist in achieving highly improved IIC sound performance in multifamily
When demanding consistent quality, specify FILL to assist in achieving highly improved sound performance in multifamily construction. FILL is an integral component of a well designed floor/ ceiling assembly.
More informationReport for CSR Hebel. Impact of various wall and floor construction options on 5 star compliance for two houses. by Tony Isaacs Consulting Pty Ltd
Tony Isaacs Consulting Pty Ltd Sustainable Buildings Specialist Report for CSR Hebel Impact of various wall and floor construction options on 5 star compliance for two houses by Tony Isaacs Consulting
More informationSymonite Decorative Panelling
Symonite Decorative Panelling WHY SYMONITE? Symonite is the only Australian manufactured aluminium composite panel. An Australian owned company whose continuous composite panel research and development
More informationInsulated Roof & Wall Panels. Foilback KS1000 FB Insulated Roof Panels. Product Data Sheet
Insulated Roof & Wall Panels Foilback KS1000 FB Insulated Roof Panels Overview Kingspan Foilback is supplied with a pre-painted Steel external (Aluzinc also available on request) with a choice of silver
More informationK5 External Wall Board
Insulation A4/6 K5 AW2194 Issue 9 Apr 2017 INSULATION FOR USE BEHIND TRADITIONAL AND LIGHTWEIGHT POLYMER MODIFIED RENDERS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell
More informationAS/NZS 2589:2007 AS/NZS
AS/NZS 2589:2017 Australian/New Zealand Standard Gypsum linings Application and finishing Superseding AS/NZS 2589:2007 AS/NZS 2589:2017 AS/NZS 2589:2017 This joint Australian/New Zealand standard was prepared
More informationFlagstone Development - Noise Assessment for Stage 1K and 1U
25 September 2017 620.10512.00900 Flagstone Stage 1K & 1U.docx Peet Flagstone City Pty Ltd Level 2, 167 Eagle Street Brisbane QLD 4000 Attention: Stephanie Clark Dear Stephanie (SLR) has been commissioned
More informationTOWN OF ROTTERDAM RESIDENTIAL BUILDING PERMIT APPLICATION Ext. 395 Needed to Obtain Permit:
TOWN OF ROTTERDAM RESIDENTIAL BUILDING PERMIT APPLICATION 355-7575 Ext. 395 Needed to Obtain Permit: 1. Building Permit Application, and/or residential plumbing permit application, as applicable, to be
More informationSECTION B Steel Frame Wall Systems. Contents. Steel Stud Selection Tables. Introduction. Design Considerations. Installation.
SECTION B Steel Frame Wall Systems. Contents. SUBJECT Steel Stud Selection Tables Introduction Design Considerations Installation Components PAGE B2 B4 B4 B6 B7 System Specifications Single Stud Staggered
More informationSECTION NON-STRUCTURAL METAL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationFULLY INTEGRATED ROOF SYSTEM
ROOFSYSTEMS I was so amazed that after my walls were erected, the Ritek Custom Roof Panel went up and was completed in two days. Within the first week of construction, the trades could work, sheltered
More informationSECTION D Masonry Wall Systems. Contents. Introduction. Design Considerations. Installation. Components. System Specifications.
SECTION D Wall Systems. Contents. SUBJECT Introduction Design Considerations Installation Components PAGE D2 D2 D4 D5 System Specifications Stud One Side Stud Both Sides Stud and Furring Channel Resilient
More informationOriginally Issued: 05/20/2013 Revised: 07/07/2017 Valid Through: 05/31/ Design
BRADY INNOVATIONS, LLC. PROX HEADER SYSTEM CSI Section: 05 05 23 Metal Fastenings 05 40 00 Cold-formed Metal Framing 1.0 RECOGNITION Brady Innovations, LLC s ProX Header System recognized in this report
More informationBuilding Design Data
Building Design Data.. 1. Building Design The KORE ICF System is designed to meet the requirements of the Building Regulations 1997-2006, in the case of two storeys, single occupancy dwellings. If the
More informationDetached Garage Construction Information
Detached Garage Construction Information In order to issue a building permit for construction of a detached garage, the applicant must submit: Completed development and building permit applications Method
More informationThe Insulbrick Building System www.insulbrick.com.au 2 Insulbrick Insulated Concrete Formwork for Australian Standards Insulbricks provide a fire retardant expanded polystyrene [EPS] formwork for casting
More informationTEST REPORT. Bushfire resistance test of an external wall system to BAL A40 in accordance with AS EWFA Report No:
TEST REPORT Bushfire resistance test of an external wall system to BAL A40 in accordance with AS1530.8.1-2007 EWFA Report No: 38031900.1 Report Sponsor: Ullrich Aluminium PO BOX 246 Carole Park QLD 4300
More informationMaxiWall High-Rise External Wall System
MaxiWall High-Rise External Wall System Technical Guide Our Story With over 110 years in the timber industry, Big River is now one of Australia s largest timber manufacturing and marketing businesses,
More informationPROMATECT -S Smoke & Fire Barrier
PROMATECT -S Smoke & Fire Barrier Introduction The purpose of a cavity barrier is to prevent the spread of smoke and flame from penetrating and/or moving within a concealed space in a fire compartment.
More informationThermal Laminate Board.
Thermal Laminate Board www.speedlinedrywall.co.uk The Dry Lining and Thermal Insulation Solution The Dry Lining and Thermal Insulation Solution Around a third of all heat lost within un-insulated or poorly
More informationqbcc queensland building and construction commission Standards & Tolerances Guide
qbcc queensland building and construction commission Standards & Tolerances Guide Queensland May 2014 1 2 Foreword This Guide has been compiled in response to community and industry concerns that identified
More informationHP Partial Fill. Robust, long-lasting protection
1 CONSTRUCTION TYPE: cavity walls HP Partial Fill Cavity Walls Robust, long-lasting protection HP Partial Fill slabs have a robust outer surface, designed to withstand on-site rigours and maintain a clearly
More informationREGULATORY INFORMATION REPORT
REGULATORY INFORMATION REPORT The fire resistance performance of Hilti Flexible Firestop Foam CFS-F FX / CP 660 protecting cable and cable conduit penetrations in walls and concrete floors if tested in
More informationRoof Systems. Span Tables & Thermal Ratings. Aquatek Roof Panel
Roof Systems Aquatek Roof Panel Tables & Thermal Ratings Version 2015.02 The ultimate roofing system for highly corrosive, industrial and aquatic environments. With large spanning capabilities and a range
More informationSAFEBRIDGE HIGH PERFORMANCE ROOF INSULATION SYSTEM
SAFEBRIDGE HIGH PERFORMANCE ROOF INSULATION SYSTEM Safebridge Key Benefits Creates a safer roof environment for workers during construction Code compliant with BCA/NCC Section J Uses the purlin space without
More informationGLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA2 Ultra Acoustical, STC 45/46 Paired, Glass Wall PRODUCT OVERVIEW: Top Supported Center Stack Paired s Manually Operated Maximum Opening Height: 12' 2 [3.7m] Maximum
More informationEvaluation Report For MgO Corpoation CMI-ER31004
Evaluation Report For MgO Corpoation CMI-ER31004 Scope & Summary of Evaluation Report MgO Corp "ResCom " is an environmentally friendly all natural magnesium oxide cold ceramic sheeting. MgO Corp "ResCom
More informationBESSER BLOCK AND BRICK
BESSER BLOCK AND BRICK NEW SOUTH WALES Products Type Description per MPa Fire Rating Notes m 2 Common Brick - Strength and Fire Resistance Periods (FRP) varies dependant on product. All products have a
More informationSECTION 1. AS MASONRY STRUCTURES CODE
mortarless masonry Design Manual Part 1 (AS 3700:2011) Section 1 Page: 1 SECTION 1. AS 3700 - MASONRY STRUCTURES CODE AS 3700:2011 Masonry structures is the current Australian standard for the design of
More informationINTERIOR FINISHES CHAPTER 8
CHAPTER 8 INTERIOR FINISHES SECTION 801 GENERAL 801.1 Scope. Provisions of this chapter shall govern the use of materials used as interior finishes, trim and decorative materials. 801.1.1 Interior finishes.
More informationASSESSMENT OF AFS STRUCTURAL WALL SYSTEM FOR CBPA NSW, FEBRUARY 2008
ASSESSMENT OF AFS STRUCTURAL WALL SYSTEM FOR CBPA NSW, FEBRUARY 2008 1. Introduction This assessment of the AFS Structural Wall System is based on the following documentation provided by the supplier,
More informationHouses and Low Rise Multi-Residential External Walls PowerPanel XL. Design and Installation Guide NEW
Houses and Low Rise Multi-Residential External Walls PowerPanel XL Design and Installation Guide NEW Contents Introduction 3 This Design Guide has been prepared as a source of information to provide general
More informationFIRM-FILL SCM-400 can be installed under a FIRM-FILL Gypsum Concrete Floor Underlayment to produce an exceptional vibration isolation floor system.
Specify FILL SCM-400 for additional impact noise control when a thicker sound mat is needed. It helps achieve higher delta numbers than thinner mats. FILL SCM-400 is a cost-effective way to address Impact
More informationThe Express Range. It s your home. The Express 12
The Express Range It s your home The Express 12 Bed 3 Alfresco 4700 x 4000 The Express 12 To fit 12m frontage Bath WC Bed 2 Living / ining 4610 x 8280 24,190 Pantry Kitchen WM FR Laundry 1 2 UP LINEN Theatre
More informationGLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA1 Ultra Acoustical, STC 45/46, Omni, Glass Wall PRODUCT OVERVIEW: Top Supported Side Stack Individual, Omni-Directional s Manually Operated Maximum Opening Height: 12'
More informationCross Laminated Timber (CLT)
Cross Laminated Timber (CLT) Lesson Learning Objectives To provide an awareness of the use of cross laminated timber (CLT) in multistorey construction. To develop an awareness of how CLT panels are fixed
More informationEasylationWall. External Wall Insulation System. bringing european innovation
EasylationWall External Wall Insulation System bringing european innovation EasylationWall... the new External Wall Insulation System using brick slips for stunning façades. EXTERNAL WALL INSULATION (EWI)
More informationSteel Composition: Effect on Coating Appearance, Thickness, Materials Handling and Surface Smoothness
Advisory Note GEN 35/2 Steel Composition: Effect on Coating Appearance, Thickness, Materials Handling and Surface Smoothness July 2013 Hot dip galvanizing is a functional coating with superior protection
More informationTimber in Bushfire Prone Areas
In many parts of Australia, the construction of new buildings and additions to existing buildings will be assessed as being in a Bushfire-prone Area. The relevant Australian Standard AS 959 provides six
More informationCITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT. Submittal Requirements
CITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT 1 East Franklin Street Phone: 301-790-4163 Third Floor Hagerstown, MD 21740 Fax: 301-791-2650 BUILDING PERMIT APPLICATION FOR RESIDENTIAL ACCESSORY
More informationSOL UTIONS LIVING SOLUTIONS LIVING SOLUTIONS
Buyer s Guide HOMES 1300 985 110 LIVING SUPPORT SOLUTIONS 2 BCDS0868 Contents Just imagine the space you can create 4 More reasons to choose SmartSpace 8 SmartSpace Project Planner 9 Design your SmartSpace
More informationThe SIPs Process. 1 Why SIPS? What is the typical process for building a home using SIPS Industries? The Factory Process...
30a Renewable Chase Bibra Lake WA 6163 Tel: (08)9494 2211 Fax: (08)9494 2202 Email: info@sipsindustries.com.au Web: www.sipsindustries.com.au The SIPs Process Contents 1 Why SIPS?... 2 1.1 Energy Efficiency...
More informationDuro-Last Roofing, Inc. 525 Morley Drive Saginaw, MI 48601
DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT Housing - Federal Housing Commissioner Series and Series Number: MATERIALS RELEASE NO: (Supersedes issue dated December 14, 2006) 1223f TO: DIRECTORS, SINGLE
More informationBEAL Appraisal Certificate The PLASTERCRETE AAC Wall Panel System
EXPIRES MAR 2018 BEAL Appraisal Certificate The PLASTERCRETE AAC Wall Panel System Product 1.1 The PLASTERCRETE NZ AAC Wall Panel System (PAWPS) is a drained and ventilated masonry veneer wall cladding
More informationSOLITEX EXTASANA ADHERO SELF-ADHESIVE UNDERLAY. Product. Scope. Appraisal No. 989 [2017] Appraisal No. 989 (2017) BRANZ Appraisals
SOLITEX EXTASANA ADHERO SELF-ADHESIVE UNDERLAY BRANZ Appraisals Technical Assessments of products for building and construction. Product 1.1 is a self-adhesive, synthetic underlay for use over rigid wall
More informationBC BUILDING CODE ERRATA
BC BUILDING CODE ERRATA The following changes should be made to print and offline copies of the 2012 BC Codes. The 2012 BC Codes subscription products include these changes. Highlighted text is used in
More informationStramit Patio Roofing Cyclonic Span Tables
Stramit Patio Roofing Cyclonic Span Tables 1 Stramit Patio Roofing Profiles How to use the tables Step 1 Determine whether the patio is monoslope or pitched. Stramit Sunset Patio Roof Panel Concealed Fixed
More informationAbu Dhabi Certification Scheme for Ceiling and Wall Board Products
Abu Dhabi Certification Scheme for Ceiling and Wall Board Products Assessment and Surveillance Plan Page i Amendment Page To ensure that each controlled copy of this ASP contains a complete record of amendments,
More informationExternal Wall Insulation Systems GUARANTEED TO PERFORM!
External Wall Insulation Systems GUARANTEED TO PERFORM! External Wall Insulation Systems The wrap-around solution for warmer homes, lower bills Soaring energy costs have brought the need for more effective
More informationCCMC MgO Board Advisory
CCMC MgO Board Advisory July 2017 Dear Building Officials, CCMC was recently made aware of premature failures in other countries of some magnesium oxide (MgO) boards. Due to the increased use of MgO boards
More informationSIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE. Product. Scope. Appraisal No. 811 [2013] Appraisal No. 811 (2013) Amended 28 August 2017
SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE Amended 28 August 2017 BRANZ Appraisals Technical Assessments of products for building and construction. Sika (NZ) Ltd PO Box 19 192 Avondale Auckland 1746
More informationLysaght Bondek. Structural steel decking system Design and Construction Manual
Lysaght Bondek Structural steel decking system Design and Construction Manual Excellent spanning capacities for greater strength and less deflection Acts as permanent formwork with minimal propping and
More informationENVIRONMENTAL PRODUCT DECLARATION
ENVIRONMENTAL PRODUCT DECLARATION LN: THS - 2008 Thermoshield Australia Pty Ltd Standard: GECA 23-2005 Architectural and Protective Coatings Conformance Declaration Date: 18th December 2008 Assurance ensuring
More informationSystem Recommendation SR0618
Ardex Australia Pty Ltd ABN 82 000 550 005 Unit 7, 20 Powers Road, Seven Hills NSW 2147 Australia Telephone + 61 2 9851 9100 Facsimile +61 2 9838 7970 www.ardexaustralia.com System Recommendation SR0618
More informationAustralian/New Zealand Standard
AS/NZS 4417.1 Australian/New Zealand Standard Marking of electrical products to indicate compliance with regulations Part 1: General rules for use of the mark This Joint Australian/New Zealand Standard
More informationFire protecting windows close to boundaries
Fire protecting windows close to boundaries product solutions Q1 Queensland Hyundai Head Office Sydney Digital Life Labs Melbourne ANZ Head Office Melbourne Stockhome, Stocklands HQ Sydney T: 1300 655
More informationEMPIRE SHAKE, EMPIRE PLUS SHAKE, AND EMPIRE SLATE POLYOLEFIN COMPOSITE TILES
UL Evaluation Report UL ER18920-01 Issued: August 15, 2014 Visit UL s On-Line Certifications Directory: www.ul.com/erdirectory for current status of Report. UL Category Code: ULEX CSI MasterFormat DIVISION:
More information(Project Location) (your firm's name)
SECTION 07 21 00 THERMAL INSULATION PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including the Conditions of the Contract and Division 01 Specification Sections
More information