Product Overview. Additives and Dispersions for the Construction Chemicals Industry

Transcription

1 Additives and Dispersions for the Construction Chemicals Industry

2 2 Ready-to-use Applications Glass transition temp. [ C] POLYMER TYPE Viscosity [approx. in mpa s] ph-value [approx.] Solids content [approx. in %] Curing compound CHARACTERISTICS Prime coats Ready-to-use tile adhesive Water vapor barrier/ wet room coating roof coating Low-temperature flexible, chemical curing inside, crack-bridging, crack-bridging Dispersions Acronal S 300 Acronal S 400 Acronal S 456 Acronal S Low emission, high pigment binding capacity, broad application spectrum possible Excellent water resistance High pigment binding capacity Outstanding water resistance High pigment compatibility High UV-resistance, flexible, crack-bridging Styrene butadiene Outstanding water-vapor barrier properties, high pigment binding capacity Acronal S 600 Acronal S 790 Acronal S 813 Acronal 290 D Acronal 567 D Styrofan D Thickeners Latekoll D Acrylic thickener (ASE) dispersion Viscalex HV Acrylic thickener (ASE) dispersion Pigment disperser A Ammonium salt of polyacrylic acid Pigment disperser NL Sodium salt of polyacrylic acid Sodium salt of carboxylic acid copolymer Dispersing Agents Pigment disperser MD 20 Defoamer Lumiten EL recommended suitable 100 Polyether derivate of fatty acid

3 3 Cementitious Applications (2C) Dispersions ph-value [approx.] Viscosity [approx. in mpa s] Glass transition temp. [ C] Solids content [approx. in %] POLYMER TYPE Cementitious ceramic tile adhesive CHARACTERISTICS Mortar modification Screed & self leveling compound cementitious waterproofing membranes Low-temperature elasticity Plasticizing effect, pre-defoamed Acrylate Low-temperature elasticity, up to -20 C Dispersions Acronal DS 3511 Acronal DS 5011 Acronal DS 5018 Acronal N 137 Acronal S Styrene butadiene Plasticizing effect Styrene butadiene Non-sagging Acronal S 456 Styrofan D 623 Styrofan D 820 Thickeners Latekoll D Acrylic thickener (ASE), dispersion Latekoll DS max. 50 Hydrophobic modified acrylic thickener (HASE) Starvis T 180 F High-efficient thickener for thixotropic rheology Defoamers Lumiten EL Lumiten E-P 3108 Vinapor DF 9010 F 100* Polyether derivate of a fatty acid in powder form Powder Polyether derivate of a fatty acid on an inert carrier material Powder Defoamer in powder form based on fatty alcohol alkoxylates and polysiloxanes Air Entraining Agents Vinapor DH50/S Vinapor DH50/SEC recommended suitable *Content of active substance Air-entraining agent in liquid form based on natural resin

4 4 Cementitious Applications (1C) Flowable Industrial plaster and medical plaster Moulding plaster Feather edge products Cementitious coatings Waterproofing membranes Injection mortars Acronal S 734 P Thin-set mortars and tile grouts Acronal S 695 P Calcium sulphate based Repair mortars Non shrink grouts/ dry mix concrete Floor screeds Acronal S 631 P CAC OPC Self levelling underlayments Cement based Floor screeds/self levelling floor screeds Redispersible Powders Acronal S 430 P Slightly plasticizing Defoamed Acronal S 735 P Not defoamed Superplasticizers Melflux 1641 F Melflux 1643 F Melflux 2641 F Melflux 2651 F Melflux 4930 F Melflux 5581 F Melflux 6681 F Melflux AP 101 F Melflux PP 100 F/ Melflux PP 200 F Melment F 10 Melment F 10 G Melment F 10 M Melment F 15 Melment F 15 G Melment F 17 G Melment F 217 G Melment F 245 Melment F 4000 High performance superplasticizers in powder form based on polycarboxylic ethers Melcret 500 F Superplasticizers in powder form based on melamine Superplasticizers in powder form based on naphtalene Stabilizers Melment F 300 Starvis 3003 F Starvis 4500 F Stabilizer in powder form based on melamine Synthetic stabilizer in powder form for flowable thin-layer systems Synthetic stabilizer in powder form for flowable thick-layer systems Thickeners Water-swellable polymer with rheology modifying properties Starvis S 3911 F High-efficient thickener for thixotropic rheology Polyether derivate of a fatty acid on an inert carrier material Defoamer in powder form based on fatty alcohol alkoxylates and polysiloxanes Starvis T 180 F Defoamers Lumiten E-P 3108 Vinapor DF 9010 F recommended suitable partially suitable

5 5 Cementitious Applications (1C) Non-sag Acronal S 629 P Acronal S 695 P Joint fillers Masonry mortars Repair mortars Acronal S 430 P Exterior insulation and finishing systems Plasters and renderings Thin-set mortars and tile grouts Redispersible Powders Slightly thickening Defoamed Not defoamed Mixing aid / wetting agent based on melamine Mixing aid / wetting agent based on polycarboxylic ether Starvis 308 F Starvis SE 25 F Starvis SE 35 F Starvis SE 45 F Starvis S 3911 F Water-swellable polymer with rheology modifying properties Acronal S 734 P Acronal S 735 P Superplasticizers Melment F 10 Melflux 5581 F Rheology Modifying Agents Rheology modifying agent, water retaining Rheology modifying agent, air-void stabilizing Starvis T 50 F Standard thickener Starvis T 51 F Thickener for improved mixing properties Starvis T 180 F High-efficient thickener with thixotropic properties Air Entraining Agent Vinapor MTZ/K50 Air-entraining agent in powder form based on natural resin recommended suitable partially suitable Gypsum Wallboards Melcret 500 L Melcret 600 L Melflux PCE 26 L/40 % F. F. Melflux PCE 239 L/35 % N. D. Melflux PCE 267 L/35 % N. D. Melflux PCE 541 L/44% F. F. Melflux PCE 1493 L/40 % N. D. recommended suitable Influence on pore structure Low retarding effect Melment L 15 G/40 % ADVANTAGES IN APPLICATION High water reduction Superplasticizer based on melamine Superplasticizers based on naphtalene High-performance superplasticizers based on polycarboxylic ethers

6 = registered trademark of BASF SE BASF SE Dispersions for Adhesives and Construction Europe E-EDK/BB - H Ludwigshafen, Germany BASF Construction Polymers GmbH Dr.-Albert-Frank-Str Trostberg, Germany construction-polymers@basf.com construction-polymers@basf.com Phone or ACRONALS Fax or ACRONALX Phone Fax EDKB 1103e The data contained in this publication are based on our current knowledge and experience. They do not constitute the agreed contractual quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based solely on the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this publication may change without prior information. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed (3/2011).