3 Scotch-Weld TM. Bulk Adhesives. General Purpose 60 CA Hi-Strength Laminating 92 Hi-Strength Post-forming 94 CA. Technical Data May, 2008

Transcription

1 3 Scotch-Weld TM General Purpose 60 CA Hi-Strength Laminating 92 Hi-Strength Post-forming 94 CA Bulk Adhesives Technical Data May, 2008 Product Description 3M Scotch-Weld Bulk Adhesives are industrial grade, general purpose bulk adhesives formulated for high coverage and excellent spray control. Key Features Great spray pattern control. Ability to spray Lace or Pebble patterns. High solids, high coverage adhesives. Fast drying formulas to help speed assembly. High heat and moisture resistant formulas (3M Scotch-Weld Bulk Adhesives 92 and 94 CA). HAPS free formulas (Scotch-Weld adhesives 92 and 94 CA). MACT compliant formulas. California compliant per SCAQMD Rule 1168 (3M Scotch-Weld Bulk Adhesives 60 CA and 94 CA). Scotch-Weld adhesive 94 CA is certified to GREENGUARD Product Emission Standard For Children and Schools (SM) for low emitting interior building materials: Addresses or Contributes to LEED EQ Credit 4.1: Low Emitting Materials: Adhesive and Sealants Addresses or Contributes to LEED EQ Credit 4.3: Low Emitting Materials: Flooring Materials Addresses or Contributes to LEED EQ Credit 4.4: Low Emitting Materials: Composite Wood and Agrifiber Products Addresses or Contributes to LEED EQ Credit 4.5: Low Emitting Materials: Furniture and Furnishings Addresses or Contributes to LEED EQ Credit 4.6: Low Emitting Materials: Ceiling and Wall Systems Post-formable (Scotch-Weld adhesive 94 CA).

2 Typical Physical Properties Product Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M Scotch-Weld Bulk Adhesive 60 CA CA Base: Synthetic Elastomer Synthetic Elastomer Synthetic Elastomer Solids Content of Adhesive (by wt.): 43% 34.4% 34% Density (lbs./gal.): Viscosity (cps): Color(s): Clear Clear Clear, Red Flash Point (TCC): 8 F 8 F 8 F Volatile Organic Compounds (VOC): 66 g/l 336 g/l 0 g/l Hazardous Air Pollutants (HAPS) % wt. (calculated): SCAQMD Rule 1168 Compliant Contact Adhesive: 3.8% 0% 0% Yes No Yes MACT Compliant: Yes Yes Yes GREENGUARD Certified: No No Yes Available Sizes and Expected Coverage Sq. Ft. Coverage Sq. Ft. 2.5 gms./sq. 2.5 gms./sq. ft. 3M Scotch-Weld Adhesive (dry wt.): (dry wt.): Bulk Adhesives Size Availability Net. Wt. (lbs.) per Wet lb. per container 60 CA 5 Gallon Pail , Gallon Drum , Gallon Pail , Gallon Drum , CA 5 Gallon Pail , Gallon Drum ,

3 Handling/ Application Information Directions for Use: Work Area Inspection: Read and follow the precautions before using product. Surface Preparation: For best results, all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. Working Temperature: The adhesive and surfaces to be bonded should be at 60 F (16 C) or above. Application: Brush, roll, or spray a uniform coat of adhesive on each surface to be bonded. Porous surfaces may require 2 coats of adhesive. A glossy film when completely dry indicates adequate adhesive. Dull spots after drying indicate not enough adhesive; these spots must have another coat. For roll application, use a roller cover that is designed for oil based paints. See Application Equipment section for additional equipment information. Drying Time: Allow to dry until adhesive is tacky, but does not transfer when touched. Bond while adhesive is still tacky. If bonding range is exceeded, recoat at least one surface. Note: Test the tackiness by gently touching the adhesive with your knuckle. If the adhesive transfers to your skin, it is too wet. If the adhesive is aggressively tacky and does not transfer to your skin, it is ready to bond. If the adhesive is dry or only has a very light tack, it is too dry and another coat of adhesive should be applied to at least one of the surfaces. (3M Scotch- Weld Bulk Adhesive 94CA will not be aggressively tacky. It will only have a slight tack.) Assembly: Position surfaces carefully before assembly. No adjustment is possible after contact. Join surfaces with firm and uniform pressure. Complete drying may take 24 hours or more. Clean Up: Excess adhesive may be removed with a 3M Adhesive Remover or a solvent such as MEK.* *Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer s precautions and directions for use. Product 3M Scotch-Weld Bulk Adhesive 60 CA CA Dry Time (minutes): Open Time (minutes): One Surface Bonding: Less demanding applications. Coat the more non-porous surface and bond within Open Time (see Open Times in above table). Note: 3M Scotch-Weld Bulk Adhesive 94 CA is not recommended for one surface bonding. Two Surface Bonding: Permanent, more demanding applications. Coat both surfaces and bond within Open Time (see Open Times in above table)

4 Application Equipment Suggestions Note: Appropriate application equipment can enhance adhesive performance. We suggest the following application equipment for the user s evaluation. 1. Pumping: A 2:1 divorced design pump is suggested. Packings and glands, in contact with the adhesive, should be PTFE. 2. Spray: Production Type Spray Equipment. 3M Scotch-Weld Bulk Adhesive 60 CA Suggestions Air Fluid Fluid Fan Fluid Atomizing Air Atomizing Air Spray Gun Cap Nozzle Control Control Pressure (Lace Pattern) (Pebble Pattern) Accuspray # (1.8 mm) 1/4 open 1/4 turn 10 psi psi > 50 psi Binks 95 66SD 63A 1/4 open 1/4 turn 10 psi psi > 50 psi Binks SD 63A wide open 3/4 turn 10 psi psi > 50 psi 3M Scotch-Weld Bulk Adhesive 92 Suggestions Air Fluid Fluid Fan Fluid Atomizing Air Atomizing Air Spray Gun Cap Nozzle Control Control Pressure (Lace Pattern) (Pebble Pattern) Accuspray # (1.8 mm) wide open 1/4 turn 20 psi psi > 50 psi Binks 95 66SD 66SS wide open 1/4 turn 20 psi psi > 50 psi Binks SD 66SS wide open 1/4 turn 20 psi psi > 45 psi 3M Scotch-Weld Bulk Adhesive 94 CA Suggestions Air Fluid Fluid Fan Fluid Atomizing Air Atomizing Air Spray Gun Cap Nozzle Control Control Pressure (Lace Pattern) (Pebble Pattern) Accuspray # (1.8 mm) wide open 1/4 turn 20 psi psi > 50 psi Binks 95 66SD 66SS wide open 1/4 turn 20 psi psi > 50 psi Binks SD 66SS wide open 1/2 turn 20 psi psi > 50 psi 3. Hoses: All material hoses should be nylon or PVA lined. 4. Brush/Roller: Typical brushes/rollers designed for oil based paint may be used

5 Typical Adhesive Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Overlap Shear Strength: 1 square inch bonds tested at 2 inches per minute separation rate at 75 F (24 ). Results are reported in PSI - pounds per square inch. 3M Scotch-Weld Bulk Adhesive Substrates Bonded 60 CA CA ABS to ABS (2 surface adhesive bond) ABS to ABS (1 surface adhesive bond) N/A Acrylic to Acrylic (2 surface adhesive bond) Aluminum to Aluminum (2 surface adhesive bond) Birch to Birch (2 surface adhesive bond) Birch to Birch (1 surface adhesive bond) N/A Galvanized to Galvanized (2 surface adhesive bond) Galvanized to Galvanized (1 surface adhesive bond) N/A HPL to Particle Board (2 surface adhesive bond) N/A Polyethylene to Polyethylene (2 surface adhesive bond) Polypropylene to Polypropylene (2 surface adhesive bond) FRP (Fiber Reinforced Plastic) to FRP (2 surface adhesive bond) Tensile Strength Failure Temperature: 4 square inch bonds tested with 30 grams hanging in tensile. Temperature is held for 10 minutes and ramped at 10 F increments, until complete failure. 3M Scotch-Weld Bulk Adhesive Failure Temperature ( F) 60 CA: : CA:

6 Storage Store product at F (16-27 C) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures may cause increased viscosity of a temporary nature. Rotate stock on a first in-first out basis. Shelf Life When stored at the recommended conditions in the original, unopened container, this product has a shelf life of 15 months from date of shipment. Precautionary Information Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call or (651) Product Use All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user s method of application. Warranty and Limited Remedy Unless stated otherwise in 3M s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M s and seller s sole obligation will be, at 3M s option, to replace the product or refund the purchase price. Limitation of Liability Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3 Industrial Adhesives and Tapes Division 3M Center, Building 21-1W-10, 900 Bush Avenue St. Paul, MN (fax) Recycled Paper 40% pre-consumer 10% post-consumer - 6-3M and Scotch-Weld are trademarks of 3M Company. GREENGUARD INDOOR AIR QUALITY CERTIFIED Design Mark and GREENGUARD are trademarks owned by Air Quality Sciences, Inc. and used under license through the GREENGUARD Environmental Institute. Printed in U.S.A. 3M (5/08)