Transit Center Waterproofing Systems. December 2015
|
|
|
- Adelia Garrison
- 5 years ago
- Views:
Transcription
1 Transit Center Waterproofing Systems December 2015
2 Agenda Waterproofing Systems Overview Roof Level Waterproofing Systems Physical Glass Monitoring Jar System Electronic Leak Monitoring Mesh System Fountain Waterproofing System Quality Measures Quality Control Installation Timeline Quality Implementation Quality Measures Quality Assurance 2
3 Waterproofing Systems Roof Park Level (WPM-3) Bus Deck (WPM-2) Train Box (WPM-1A) Train Box (WPM-1) 3
4 Roof Park Level Waterproofing System ROOF PARK LEVEL BUS DECK CEILING CAVITY PROTECTION SLAB WATERPROOFING SYSTEM STRUCTURAL SLAB 4
5 Roof Park Level Waterproofing System Physical Glass Monitoring Jar System 4
6 Roof Park Level Physical Glass Monitoring Jar System Roof Top Park Slab above System of Glass Monitoring Jars Monitoring Jar 6
7 Roof Park Level Physical Glass Monitoring Jar System Benefits of the Glass Monitoring Jars 32 discrete compartments within the waterproofing system 32 proposed locations for the glass monitoring jars within the Bus Deck ceiling area near ceiling column pockets Approximately 2 jars every 85 feet Allows ongoing inspection of the system on an established periodic basis 7
8 Roof Park Level Waterproofing System Leak Monitoring Systems During Construction / Installation: Mesh located between 1 st and 2 nd ply of PVC membrane to facilitate the electronic monitoring during construction. Flood testing required following installation of the first ply to ensure that it is watertight. Electronic testing required following installation of the second (top) ply. During Building Operation: The glass monitoring jar system is included to allow for ongoing monitoring for leaks. The glass monitoring jar system also provides a conduit for leak repair if necessary utilizing urethane injection. 8
9 Roof Park Level Fountain Waterproofing System fountain Park Slab 9
10 Prequalified Installation Subcontractor. Proven experience on Transit Center. Certified by manufacturer. Submittals Reviewed & Approved. Manufacturer-Administered Installation Training. Quality Mockup. Manufacturer Technical Field Support. Ongoing inspection and testing. 20-Year Warranty at the Roof Park. Construction Monitoring throughout Installation. Substrate preparation. Adhesion / seam welds. Transitions and terminations. Quality Measures Quality Control of Waterproofing Field Reports and Conditions Log. Track open items and resolution. 10
11 Installation Timeline Dec 15 Preparatory Meeting Jan 16 Initial Meeting Jan 16 Manufacturer's Installation Training Feb 16 Mockup Installation May 16 Start Installation Dec 15 Mar 16 Apr 16 Deliver Materials Jan 16 Feb 16 Mar 16 Apr 16 May 16 Preparatory Meetings (Review all contract requirements) December 2015 Initial Meetings (Review open items) January 2016 Manufacturer-Administered Installation Training January 2016 Mockup of Waterproofing February 2016 Deliver all Materials March & April 2016 Start Installation May
12 1. Inspect substrate before waterproofing installation. 2. Set the monitor jars & inspect. 3. Install 12 grid strips to form containment sections. 4. Install puncture-resistant geotextile fabric leveling layer. 5. Weld ends to ensure uniform adhesion. 6. Install control test drain 24 from roof drains. 7. Install first ply of 80mil PVC membrane & test. Quality Implementation 8. Install protection felt and aluminum grounding screen for electronic testing. 9. Inspect all edge conditions at all penetrations. 10. Install second ply of 80 mil PVC membrane and perform electronic test. TYPICAL SYSTEM 11. Install protection layer, drainage composite, insulation boards, filter fabric, and membrane flashing with termination bar. 12. Install 4 concrete protection slab. 12
13 Quality Measures Quality Assurance of Waterproofing Turner has engaged Simpson, Gumpertz & Heger (SGH) to provide independent construction oversight and quality assurance of key waterproofing systems. Review waterproofing and roofing submittals and shop drawings. Attend pre-construction meetings with the design and construction teams. Attend coordination meetings with the construction teams and provide input regarding installation methods and testing plans. Attend mockups of each installation with the construction teams and provide input and a field report summarizing SGH observations. Perform QA oversight surveillances of installed work and identify any nonconforming installations and deficiencies. Assist with problem-solving and with resolving nonconforming installations and deficiencies. 13
14 Questions? Transbay Transit Center Quality Team 14
SECTION MODIFIED BITUMINOUS SHEET WATERPROOFING
SECTION 07 13 52 MODIFIED BITUMINOUS SHEET WATERPROOFING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section
G October 2018
G-13-18 VacuSeal TM Vent Secured Roofing Systems October 2018 The information contained in this supplement serves as a criteria for Specifiers and Authorized Applicators regarding the design and installation
G October 2018
G-14-18 October 2018 The information contained in this supplement serves as a criteria for Specifiers and Authorized Applicators regarding the design and installation of Carlisle Roofing Systems and use
1. Clean the existing totally adhered or mechanically attached roof membrane: TPO, EPDM, Hyplon,
Summary Specification Re-Skinning Over Two Existing Roofs The Top Roof Being a Totally Adhered Single Ply Over a Built-Up-Roof On A Poured-in-Place Concrete Deck Using the Existing Angle Change Terminations
Student Services & Classroom Addition
SECTION 071326 - SELF-ADHERING SHEET WATERPROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SECTION THERMOPLASTIC POLYOLEFIN (TPO) ROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 075423 - THERMOPLASTIC POLYOLEFIN (TPO) ROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including Division 00 Bidding Requirements and other Division
SECTION SELF-ADHERING SHEET MEMBRANE WATERPROOFING
SECTION 07 13 26 PART 1 - GENERAL 1.1 SUMMARY A. Scope: 1. Apply waterproofing to: a. Exterior of walls below grade: 1) Waterproofing shall include exterior of walls surrounding elevator pits and sumps.
1. Rubberized asphalt waterproofing membrane, reinforced. 2. Molded sheet drainage panels. 3. Insulation. 4. Plaza deck pavers.
SECTION 071413 HOT FLUID APPLIED RUBBERIZED ASPHALT WATERPROOFING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Rubberized asphalt waterproofing membrane, reinforced. 2. Molded sheet drainage panels.
SECTION FLUID-APPLIED WATERPROOFING
SECTION 07140 FLUID-APPLIED WATERPROOFING PART 1 GENERAL 1.1 SUMMARY A. Section includes fluid applied rubberized asphalt and/or elastomeric membrane waterproofing; and surface dusting and/or protective
SECTION 07530CP EPDM MEMBRANE ROOFING
PART 1 GENERAL 1.1 SUMMARY SECTION 07530CP EPDM MEMBRANE ROOFING A. Section includes: 1. Adhered membrane roofing and flashing 2. Mechanically fastened roof insulation 3. Walkway pads 1.2 ARCHITECTURAL
A. Section includes fluid applied, vapor permeable membrane air barriers.
Master Construction Specifications Insert Project Name SECTION 072726 FLUID APPLIED MEMBRANE AIR BARRIERS PART 1 GENERAL 1.1 SUMMARY A. Section includes fluid applied, vapor permeable membrane air barriers.
CITY OF RICHMOND PINE CAMP COMMUNITY CENTER ROOF REPLACEMENT PROJECT RCS PROJECT NO
SECTION 01010 - SCOPE OF WORK PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. General provisions of Contract, General Conditions and Technical Specification Sections, apply to this Section. 1.02 PROJECT DESCRIPTION
Finding Value in Building Enclosure Commissioning
Finding Value in Building Enclosure Commissioning Brian S. Rose, P.E. Technical Staff Jeffrey D. Kerr, P.E. Senior Project Manager 12 March 2015 www.sgh.com Course Description This presentation will outline
WATERPROOFING SYSTEMS BLACK PEARL BASE FLASHING OPTION AT PARAPET RT250-05B 04/2016 WATERPROOFING SYSTEMS TYPICAL CURB DETAIL WITH CONCRETE TRAFFIC SURFACE RT250-06 4/2016 RAM-TOUGH 250DM WATERPROOFING
ROOFING EPDM ELASTOMERIC SHEET ROOFING FULLY ADHERED- CONVENTIONAL
ROOFING EPDM ELASTOMERIC SHEET ROOFING FULLY ADHERED- CONVENTIONAL PART 1 GENERAL 1.1 SECTION INCLUDES A. Insulation, membrane roofing, base flashings roofing membrane accessories joints, and counter flashings.
BITUTHENE Deck System
BITUTHENE Deck System Cold-applied, waterproofing system for inverted roofs, green roofs and elevated decks Product Description BITUTHENE Deck System combines BITUTHENE 4000 sheet membranes with BITUTHENE
GUIDE SPECIFICATION FOR MEL-ROL : ROLLED, SELF-ADHERING WATERPROOFING MEMBRANE
GUIDE SPECIFICATION FOR MEL-ROL : ROLLED, SELF-ADHERING WATERPROOFING MEMBRANE SECTION 07 13 26 SELF-ADHERING SHEET WATERPROOFING Specifier Notes: This guide specification is written according to the Construction
SECTION MODIFIED BITUMINOUS MEMBRANE ROOFING Peel & Roof
SECTION 07550 MODIFIED BITUMINOUS MEMBRANE ROOFING Peel & Roof This section is based on the products of MFM Building Products Corp., which is located at: 525 Orange St. P. O. Box 340 Coshocton, OH 43812
SECTION THERMOPLASTIC MEMBRANE ROOFING PART 1 GENERAL 1.01 SECTION INCLUDES
SECTION 07540 - THERMOPLASTIC MEMBRANE ROOFING PART 1 GENERAL 1.01 SECTION INCLUDES A. Mechanically attached system with thermoplastic roofing membrane. B. Insulation, flat and tapered. C. Flashings. D.
SECTION MANUFACTURED ROOF EXPANSION JOINTS
SECTION 07 71 29 - MANUFACTURED ROOF EXPANSION JOINTS PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
E. Section Polymer Modified Cement Waterproofing. K. Section Sub drainage: Foundation perimeter drainage.
DELTA -DRAIN Section 07 10 00 Dampproofing and Waterproofing PART 1 GENERAL 1.1 SECTION INCLUDES A. Below grade drainage sheets. B. Plaza deck and planter drainage sheets. 1.2 RELATED SECTIONS A. Section
SECTION COLD APPLIED RUBBER MODIFIED ASPHALT WATERPROOFING
P.O. Box 599 - Mars, PA 16046 800-321-3337 SECTION 07555 COLD APPLIED RUBBER MODIFIED ASPHALT WATERPROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including
SECTION SELF-ADHERED WATER-RESISTIVE ROOF UNDERLAYMENT
SECTION 07 30 05.01 SELF-ADHERED WATER-RESISTIVE ROOF UNDERLAYMENT SPEC WRITERS NOTE: This specification includes materials and installation procedures for SlopeShield SA Self-Adhered Water-Resistive Vapor
EverGuard Plaza Deck Roofing For Above-Grade Plaza Deck Applications
EverGuard Plaza Deck Roofing For Above-Grade Plaza Deck Applications Specifications Updated: 12/07 Quality You Can Trust Since 1886... From North America s Largest Roofing Manufacturer PLAZA DECK ROOFING
1. Decks, balconies, and sun porches 2. Walkways, ramps, and stairways 3. Patios and courtyards
SECTION 07185 TRAFFIC MEMBRANE PART 1 GENERAL 1.1 SECTION INCLUDES A. Traffic membrane, consisting of welded seam PVC waterproofing, over f following surfaces: 1. Decks, balconies, and sun porches 2. Walkways,
BENTONITE WATERPROOFING
SECTION 07 17 00 BENTONITE WATERPROOFING PART 1 - GENERAL 1.1 SUMMARY A. Furnish and install bentonite waterproofing system where shown on the drawings, as specified herein, and as needed for a complete
University of New Hampshire Scholars' Repository
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 075423 - TPO
BUILDING ENCLOSURE COMMISSIONING PLAN PROJECT NAME
BUILDING ENCLOSURE COMMISSIONING PLAN For The PROJECT NAME Building Enclosure Commissioning Plan Overview The purpose of the Building Enclosure Commissioning Plan is to provide a clear and concise roadmap
A. This Section includes traffic coatings for the following applications:
SECTION 071800 - TRAFFIC COATINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes traffic coatings for the following applications: 1. Interior and exterior, pedestrian traffic. 2. Vehicular traffic.
SECTION SELF-ADHERING SHEET FLASHING
MANUFACTURER S GUIDE SPECIFICATIONS SECTION 076526 SELF-ADHERING SHEET FLASHING 900 Hensley Lane Wylie TX 75098 800-527-7092 www.carlisleccw.com 604129 03.24.15 Carlisle, Flexphalt, Sure-Seal and CAV-GRIP
Options In Flashing for Asphaltic and Single-Ply Systems Brochure
Options In Flashing for Asphaltic and Single-Ply Systems Brochure Updated: 1/12 www.gaf.com OPTIONS IN FLASHING for Asphaltic and Single-Ply Systems www.gaf.com All roofing professionals recognize that
SECTION mil thickness REINFORCED LIQUID-APPLIED WATERPROOFING
SECTION 07143 CCW-MIRASEAL @ 120 mil thickness REINFORCED LIQUID-APPLIED WATERPROOFING PART 1 - GENERAL 1.1 SECTION INCLUDES: Installation of waterproofing membrane on surfaces indicated on drawings, consisting
Installation Guidelines VBC Products
Installation Guidelines VBC Products Composite STEP 1A: Ground Surface Preparation Earth Base Select the suitable product (VBC-350, 31 mil) and ensure the installation surface is relatively smooth. Barrier-Bac
SECTION SINGLE-PLY ROOFING SYSTEM
PART 1 - GENERAL 1.01 SCOPE OF WORK A. The Contractor shall furnish all labor, materials, equipment and incidentals required to provide single-ply adhered roofing system. 1.02 COORDINATION A. The Contractor
SECTION mil thickness REINFORCED LIQUID-APPLIED WATERPROOFING
SECTION 07143 CCW-MIRASEAL @ 120 mil thickness REINFORCED LIQUID-APPLIED WATERPROOFING PART 1 - GENERAL 1.1 SECTION INCLUDES: Installation of waterproofing membrane on surfaces indicated on drawings, consisting
SECTION MODIFIED BITUMINOUS MEMBRANE ROOFING Peel & Seal
SECTION 07550 MODIFIED BITUMINOUS MEMBRANE ROOFING Peel & Seal This section is based on the products of MFM Building Products Corp., which is located at: 525 Orange St. P. O. Box 340 Coshocton, OH 43812
Colphene BSW Training and Application Guide. Colphene BSW Waterproofing Membrane. 1. Prepare substrate
Colphene BSW Training and Application Guide Colphene BSW Waterproofing Membrane. 1. Prepare substrate Substrate must be structurally sound. Surface must be free of voids, spalled areas, loose aggregate,
SECTION SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING
SECTION 093000 - SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING PART 1 - GENERAL This specification includes the sheet membrane used for sound reduction, crack isolation
For 17 years, IRSI has been providing the CAT 5 Roof Design with Guaranteed Hurricane Protection
For 17 years, IRSI has been providing the CAT 5 Roof Design with Guaranteed Hurricane Protection What is the single most destructive force that causes damage to roofing systems? 85% The water uplift is
PG&E BUILDING AT 215 MARKET STREET
San Francisco, CA ICRI Northern California Chapter 2017 Concrete Repair Awards Simpson Gumpertz & Heger Inc. OVERVIEW The historic 215 Market Street Annex is a seven-story office building in downtown San
SLAB ON GRADE Insul-Joint or Expansion Joint Material as Required by A/E Specifications AquaCheck Liquid Coating 400 (Waterproofing Membrane) with Aqu
INSTALLATION INSTRUCTIONS Note: The following installation instructions are based off of ASTM E 1643 (Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular
OREGON CONVENTION CENTER CHILLER PLANT RE-DESIGN CD SET
SECTION 07 54 19 - POLYVINYL-CHLORIDE (PVC) ROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
D. Product Test Reports: Based on evaluation of comprehensive tests performed by a qualified testing agency, for waterproofing.
SECTION 071326 - SELF-ADHERING SHEET WATERPROOFING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Modified bituminous sheet waterproofing. 2. Molded-sheet drainage panels. 1.2
SECTION (07100) - DAMPPROOFING AND WATERPROOFING
SECTION 07 10 00 (07100) - DAMPPROOFING AND WATERPROOFING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Sheet Membrane Waterproofing 2. Under-Slab-On-Grade Vapor Barrier B. Related Sections: 1.02
ACRYLIC. AGED (PVC, CPE, CPA) SINGLE-PLY (Thermoplastic) Membrane Restoration Sample Design Guideline
1 DG0013-J 04/2017 AGED (PVC, CPE, CPA) SINGLE-PLY (Thermoplastic) Membrane Restoration Sample Design Guideline ACRYLIC ITW POLYMERS SEALANTS NORTH AMERICA, INC. 111 S. Nursery Road. Irving, TX 75060 Tel:
Architectural Inspection Low Slope Roofing
0521 Low Slope Roofing All components of the roof system including insulation The roofing on the original building is an Inverted Roof Membrane Assembly (IRMA). It consists of a rubber membrane over ¾
QA/QC Program Overview. November, 2015
QA/QC Program Overview November, 2015 Quality Roles on the Project Construction Management Oversight (CMO-Turner) functions as the TJPA s eyes and ears. Construction Manager/General Contractor (CM/GC-
APPLICATION SPECIFICATION
APRIL 2017 APPLICATION SPECIFICATION Section 07575 ORGANIC ZERO VOC ELASTOMERIC WEARING TRAFFIC DECK AND RAMP MEMBRANE SYSTEM PART 1 GENERAL 1.1 SUMMARY A. This section describes the requirements for furnishing
DUKE UNIVERSITY CONSTRUCTION STANDARDS
1 07 40 00 Roofing 1. General Several factors repeatedly show up during the inspection of roofs that have failed prematurely. They include inappropriate use of materials, poor drainage systems, poor details
Royal North Shore Hospital Redevelopment and Community Health Service Project. Waterproofing Technical Analysis
Royal North Shore Hospital Redevelopment and Community Health Service Project Waterproofing Technical Analysis The Wolfin GWSK Waterproofing Membrane System has been installed on the critical areas of
Master Specification SECTION GREEN ROOF DRAINAGE LAYER. Date: 22MAY07
Master Specification 33 46 23.19.1-1 SECTION 33 46 23.19.1 GREEN ROOF DRAINAGE LAYER Date: 22MAY07 PART 1 GENERAL 1.01 SUMMARY A. This specification describes the J-DRain GRS, Green Roof System and/or
B.01. Lincoln Property Company 100 Lowell Road North Reading, MA 01864
7 Specific Notes - Type B Repairs Detail Step. SHADED AREAS INDICATE MATERIALS TO BE REMOVED.. REMOVE EXISTING PVC RAILINGS AND STORE FOR RE-INSTALLATION UPON COMPLETION OF THE WORK 6" Min.. REMOVE X VERTICAL
SECTION THERMOPLASTIC MEMBRANE ROOFING. C. Flashings. D. Roofing cant strips, stack boots, roofing expansion joints, and walkway pads.
McClellan Blakemore Architects New Warehouse Facility for SECTION 07540 THERMOPLASTIC MEMBRANE ROOFING PART 1 GENERAL 1.01 SECTION INCLUDES A. Adhered system with thermoplastic roofing membrane. B. Insulation,
SECTION SELF-ADHERING SHEET WATERPROOFING
SECTION 07 13 26 SELF-ADHERING SHEET WATERPROOFING This guide specification has been prepared by Polyguard Products Inc., in printed and electronic media, as an aid to specifiers in preparing written construction
URETHANE. Asphalt Restoration Aged BUR and Modified Bitumen Sample Design Guideline
1 DG0001-J 05/2017 Asphalt Restoration Aged BUR and Modified Bitumen Sample Design Guideline URETHANE ITW POLYMERS SEALANTS NORTH AMERICA, INC. 111 S. Nursery Road. Irving, TX 75060 Tel: 972-438-9111 Fax:
SECTION SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING
SECTION 093000 - SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING PART 1 - GENERAL This specification includes the sheet membrane used for sound reduction, crack isolation
Thermoplastic Waterproofing Membrane with APC Technology
C O L L O I D E N V I R O N M E N T A L T E C H N O L O G I E S C O M P A N Y Thermoplastic Waterproofing Membrane with APC Technology Quality from the Ground Up ADVANCED TECHNOLOGY SUPERIOR PERFORMANCE
SECTION MODIFIED BITUMINOUS SHEET WATERPROOFING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 13 52 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph
DESIGN GUIDELINE FLUID-APPLIED WATERPROOFING
DESIGN GUIDELINE FLUID-APPLIED WATERPROOFING (TO RESTORE SMOOTH MODIFIED BITUMEN/BUR) PART 1 GENERAL 1.01 DESCRIPTION A. The scope of this design guideline is to describe the installation of the ALDOCOAT
A. Product Data: Submit manufacturer s product data, with complete general and specific installation instructions, recommendations, and limitations.
SECTION 071700 - BENTONITE WATERPROOFING PART 1 - GENERAL 1.1 WORK SUMMARY A. The work of this section includes, but is not limited to the furnishing and installing the following materials, per project
SECTION mil thickness COLD FLUID-APPLIED WATERPROOFING
SECTION 07 14 16 CCW-MIRASEAL @ 120 mil thickness COLD FLUID-APPLIED WATERPROOFING PART 1 - GENERAL 1.1 SECTION INCLUDES: Installation of waterproofing membrane on surfaces indicated on drawings, consisting
HALIFAX HUMANE SOCIETY BOARDING AND GROOMING FACILITY SECTION STYRENE-BUTADIENE-STYRENE (SBS) MODIFIED BITUMINOUS
SECTION 075216 - PART 1 - GENERAL 1.1 SUMMARY A. Section includes styrene-butadiene-styrene (SBS) modified bituminous membrane roofing. 1.2 DEFINITIONS A. Hot Roofing Asphalt: Roofing asphalt heated to
2002 Advanced Building Products, Inc., P.O. Box 98, Springvale, Maine TEL: ; FAX: ; WEBSITE:
SECTION 07651 FLEXIBLE COPPER SHEET FLASHINGS Advanced Building Products, Inc. manufacturer many types of flexible copper sheet flashings. Due to their ductility, high tensile strength, and resistance
SECTION G RELIEF VENTS A-0
SECTION G A-0 TABLE OF CONTENTS Thaler Or Equal RV-1A/-RV-1C Relief Vent RV-2A/-RV-2C Relief Vent RV-3A/-RV-3C One Way Relief Vent Relief Vent Specification G-0 G-1 G-2 G-3 G-4, G-5, G-6 WHAT IT TAKES
SECTION SELF-ADHERING SHEET WATERPROOFING (650 MEMBRANE SYSTEM)
SECTION 07 13 26 SELF-ADHERING SHEET WATERPROOFING (650 MEMBRANE SYSTEM) This guide specification has been prepared by Polyguard Products Inc., in printed and electronic media, as an aid to specifiers
Architectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL WALL PANELS This Guide Specification
SECTION 1 - ETHYLENE-PROPYLENE-DIENE-MONOMER (EPDM) ROOFING
Project Name: Jefferson City Jaycees Fairgrounds Main Building Roof Replacement Project Site Address: 1445 Fairgrounds Road, Jefferson City, MO 65109 Project Contact: Randy Weaver Project Contact phone
SILICONE ROOF COATING RESTORATION (RCR) SYSTEM OVER GRAVEL SURFACE BUR
SILICONE ROOF COATING RESTORATION (RCR) SYSTEM OVER GRAVEL SURFACE BUR Part 1. 1.01 Description General Conditions A. Scope of Work Provide all materials, labor and equipment required for the installation
E. Section Polymer Modified Cement Waterproofing. K. Section Sub drainage: Foundation perimeter drainage.
DELTA -DRAIN 6200 Section 07 10 00 Dampproofing and Waterproofing PART 1 GENERAL 1.1 SECTION INCLUDES A. Below grade waterproofing. B. Below grade drainage sheets. C. Plaza deck and planter drainage sheets.
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 07 5323 - ETHYLENE-PROPYLENE-DIENE-MONOMER (EPDM) ROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
MODIFIED BITUMINOUS SHEET AIR / VAPOUR BARRIERS SELF ADHESIVE
Page 1 of 8 MODIFIED BITUMINOUS SHEET AIR / VAPOUR BARRIERS SELF ADHESIVE SOPRASEAL STICK 1100 T FOR A COMPLETE DESCRIPTION OF PRODUCTS AND APPLICABLE STANDARDS, PLEASE REFER TO THE TECHNICAL DATA SHEETS
Gensler 2014/06/16 Hertz Global Headquarters ISSUE FOR BUILDING PERMIT Estero, Florida SECTION
SECTION 072700 VAPOR PERMEABLE AIR BARRIER LIQUID MEMBRANE PART 1 GENERAL 1.1 GENERAL REQUIREMENTS A. The Work of this Section, as shown or specified, shall be in accordance with the requirements of the
SECTION METAL FRAMED SKYLIGHT. A. Engineering, preparation of fabrication drawings and structural calculations for the entire skylight system.
SECTION 08625 METAL FRAMED SKYLIGHT PART 1 GENERAL 1.01 SECTION INCLUDES: A. Engineering, preparation of fabrication drawings and structural calculations for the entire skylight system. B. Fabrication
SECTION SELF-ADHERING SHEET WATERPROOFING (650 MEMBRANE SYSTEM)
SECTION 07 13 26 SELF-ADHERING SHEET WATERPROOFING (650 MEMBRANE SYSTEM) ************************************************************************************************************************ This guide
ASTEC Re-Ply Roof System for ASPHALT & MODIFIED BITUMEN ROOFS
ASTEC Re-Ply Roof System for ASPHALT & MODIFIED BITUMEN ROOFS Re-Ply Roofing Systems Application Specification # AC - 2010-A & MB PART I GENERAL 1.01 DESCRIPTION A. This guideline specification includes
S Y S T E M S FOAM IN WATERPROOFING. Whether used as a drainage board, underslab
FOAM IN WATERPROOFING S Y S T E M S Photos Courtesy John Cambruzzi/Sarnafi l Whether used as a drainage board, underslab insulation, or in roofing systems, every waterproofer deals with foam board. Rigid
UNIVERSITY OF MISSOURI Division 07 Thermal and Moisture Protection Roofing:
Roofing: 1. Materials used for moisture protection will comply with specifications contained in the appropriate American Society for Testing and Material standards (ASTM). 2. General roof specification
SECTION Tile Roof Guideline. B. "Pan" Tile: Clay tile on the underlayment, convex in shape.
SECTION 07 32 13 Tile Roof Guideline PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The drawings and general provisions of the contract, including General and Specific Conditions, and Division 1 (General Requirements)
Tuscaloosa Police Station
Tuscaloosa Police Station 3801 Trevor S Phillips Ave Tuscaloosa, AL 35401 Core Cut: Spray Foam Roof- ½ thick +- Single Ply Membrane Tapered EPS Insulation 2-6 Metal Deck PART 1 GENERAL 1.1 SCOPE OF WORK
FLUID APPLIED WATERPROOFING
SECTION 07120 FLUID APPLIED WATERPROOFING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 09200 - Metal Studs, Metal Lath, Suspension Ceilings, Plaster, and Stucco.
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY DISTRIBUTION ENGINEERING DISTRIBUTION EQUIPMENT
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY 10003 DISTRIBUTION ENGINEERING DISTRIBUTION EQUIPMENT SPECIFICATION EO-1007 REVISION 13 DECEMBER 2013 EFFECTIVE DATE DECEMBER 16,
SECTION COMPOSITE WALL PANELS PART 1 GENERAL 1.01 SECTION INCLUDES
SECTION 07 4243 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Composite wall panel system consisting of aluminum-faced composite panels in a rainscreen application as part of the assembly described below.
Banyan Air Service November 18, 2011 AVE Aviation and Commerce Center Building 1 Miami, FL
SECTION 07543 - THERMOPLASTIC POLYOLEFIN (TPO) ROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SOLAR COATING SYSTEMS SYSTEM EMULSION /ACRYLIC. Specification for Built-Up Roofing MULSION/A 1.01 SUMMARY
SOLAR COATING SYSTEMS 2-PLY EMULSION MULSION/A /ACRYLIC SYSTEM Specification for Built-Up Roofing 07590 PART 1. GENERAL 1.01 SUMMARY Name Address City, State, zip A. Furnish and install a seamless, reinforced
E. Section Polymer Modified Cement Waterproofing. K. Section Sub drainage: Foundation perimeter drainage.
DELTA -MS CLEAR Section 07 10 00 Dampproofing and Waterproofing PART 1 GENERAL 1.1 SECTION INCLUDES A. Below grade waterproofing and dampproofing. 1.2 RELATED SECTIONS A. Section 07 11 13 - Bituminous
Architectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL ROOF AND WALL PANELS This Guide Specification is to be used
Margaret Batts Tobin Laboratory
Roof Evaluation of Margaret Batts Tobin Laboratory The University of Texas At San Antonio Performed for UTSA Zero/Six Consulting, LLC 8423 Stewart Road Galveston, Texas 77554 409 740 0090 voice Table of
SOLAR COATING SYSTEMS ACRYLIC RENOVATION ROOF 4.5. Specification for Built-Up Roofing SUMMARY
SOLAR COATING SYSTEMS ACRYLIC ROOF RENOVATION 4.5 Specification for Built-Up Roofing 07590 PART 1. GENERAL 1.01 SUMMARY NAME ADDRESS A. Furnish and install a seamless, waterproof spray applied elastomeric
GUIDELINES FOR ROOF MOUNTED PHOTOVOLTAIC INSTALLATIONS
GUIDELINES FOR ROOF MOUNTED PHOTOVOLTAIC INSTALLATIONS 1. General Information included in this document is to be used as a guideline when a Photovoltaic (PV) system is to be installed over a new or existing
DESIGN GUIDELINE FLUID-APPLIED WATERPROOFING
DESIGN GUIDELINE FLUID-APPLIED WATERPROOFING (TO RESTORE SMOOTH MODIFIED BITUMEN/BUR ROOF SYSTEMS) PART 1 GENERAL 1.01 DESCRIPTION A. The scope of this design guideline is to describe the installation
SECTION DAMPPROOFING AND WATERPROOFING
SECTION 07100 DAMPPROOFING AND WATERPROOFING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Sheet Membrane Waterproofing 2. Under-Slab-On-Grade Vapor Retarder B. Related Sections: 1. Section 03300
Recognizing and Addressing Moisture Concerns by Mike Endredi
Recognizing and Addressing Moisture Concerns by Mike Endredi Moisture within a building can leave a building owner feeling panicked, perplexed and helpless. The myriad of moisture sources can be overwhelming.
ROOF SUBSTRATE PREP MANUAL
ROOF SUBSTRATE PREP MANUAL ALDOCOAT Liquid Applied Roof Restoration Systems AFTER BEFORE JULY 2016 1604 N. Main St. Kannapolis, NC 28081 (800) 474-6019 www.aldoproducts.com ROOF SUBSTRATE PREPARATION Preparation
Thornbury Sewer Treatment Plant Roof Report 2016
Garland Canada Inc. Roof Asset Management Program Thornbury Sewer Treatment Plant Roof Report 2016 Prepared By Andrew Kukkonen Prepared For Rob Fleming Table of Contents Thornbury Sewer Treatment Plant
SECTION BUILT-UP BITUMINOUS WATERPROOFING
SECTION 07 12 00 BUILT-UP BITUMINOUS WATERPROOFING SPEC WRITER NOTE: Delete any item or paragraph not applicable in the section and renumber the paragraphs. PART 1 - GENERAL 1.1 DESCRIPTION: This section
URETHANE. CONCRETE ROOF WATERPROOFING SYSTEM Sample Design Guideline
1 DG0049-A 052017 CONCRETE ROOF WATERPROOFING SYSTEM Sample Design Guideline URETHANE ITW POLYMERS SEALANTS NORTH AMERICA, INC. 111 S. Nursery Road. Irving, TX 75060 Tel: 972-438-9111 Fax: 972-554-3939