SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Kenneth Short
- 5 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD Standard for standards Part 1: The development of South African National Standards Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Table of changes Change No. Date Scope Foreword This South African standard was approved by National Committee SABS TC 200, Development of standards for standards, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in November This document supersedes SANS 1-1:2009 (edition 2). This document is referenced in the Standards Act, 2008 (Act No. 8 of 2008). This document was written in order to support a specific South African Regulation and, of necessity, includes references to South African legislation. It therefore might not be suitable for direct application in other jurisdictions where conflicting legislation exists. SANS 1 consists of the following parts, under the general title Standard for standards: Part 1: The development of South African National Standards. Part 2: Requirements for the recognition of Standard Development Organizations (SDOs) in South Africa. Annex A forms an integral part of this document. Annex B is for information only.
3 0 Introduction 0.1 Status of the South African Bureau of Standards (SABS) The SABS is, in terms of the Standards Act, 2008 (Act No. 8 of 2008), the peak national institution for the development, maintenance and promotion of South African National Standards. This part of SANS 1 is the norm that has been developed by the SABS, in terms of section 23(1) of the Standards Act, to detail the process for the development and amendment of South African National Standards and the appeals procedure for resolving disputes and deadlocks. The SABS Standards Division acts as an arbiter in the development and maintenance of South African National Standards The affairs of the SABS are governed by the Board of the SABS, whose members are appointed by the Minister of Trade and Industry The SABS provides standards and conformity assessment services to industry. The mission of the SABS is to provide and promote standardization services in South Africa and abroad in support of the national system of innovation and trade, with the ultimate aim of contributing to uplifting the quality of life of all sectors of society The objectives of the SABS, as stated in the Standards Act, include the following: a) to develop, promote and maintain South African National Standards; b) to promote quality in connection with commodities, products and services; and c) to render conformity assessment and related services The SABS may also, in its capacity as the peak national standards institution a) enter into agreement with, b) render assistance to, or c) obtain the cooperation of a person, a body, an organization, an administration, an authority or a government, in any country or territory outside South Africa. NOTE The SABS is a member body of the International Organization for Standardization (ISO) and participates actively in a number of its committees. The SABS also provides the financial and administrative support for South Africa's membership of the International Electrotechnical Commission (IEC), which is responsible for international standards in the electrotechnical field. The SABS is an active member of SADCSTAN, the standards development committee within the Southern African Development Community (SADC), and takes part in other standardization forums such as the United Nations Economic Commission for Europe (UNECE) and the Codex Alimentarius Commission (an intergovernmental body responsible for the development of model regulations and standards related to food and agricultural products) This part of SANS 1 is applied in the development and amendment of South African National Standards by the SABS and any Standards Development Organization (SDO) appointed by the SABS, in terms of section 25 of the Standards Act. 1
4 Introduction (concluded) 0.2 Aims and benefits of standardization The main aims and benefits of standardization can be summarized as follows: a) to improve the quality (fitness for purpose) of goods and services; b) to maintain and improve the quality of life of society, by paying attention to such matters as safety, health and protection of the environment, and to provide a basis for the legislation required in the protection of the public; c) to utilize resources more efficiently through better (i.e. standardized) communication, through simplification of manufacturing, product identification and purchasing by means of variety control, as well as through cost savings as a result of, for example, economies of scale and reductions in wastage; and d) to provide a framework within which to facilitate and encourage trade among willing partners, contracts based on standards, to eliminate trade barriers, and to promote service excellence, and fair and efficient trade at all levels Standardization involves the following: a) the development, establishment and publication of standards (covering, for example, specifications for products, services or systems, codes of practice, and methods of test); b) when appropriate, inspection and testing of products and processes for compliance with standards; c) when required, formal certification by a certification body of the compliance of a product, service or system with one or more standards; d) when appropriate, the application of standards as technical regulations or compulsory specifications; e) administrative functions related to, amongst others, the maintenance of the national standards database; and f) the promotion of efforts to facilitate the correct application of standards through, for example, training. 2
5 Contents Page Foreword 0 Introduction Scope Normative references Definitions and abbreviations Principles for the development of South African National Standards Stages of development Committees New projects Appeals Updating and maintenance of standards Copyright Patents Relationship with the law Annex A (normative) The SABS committee code of conduct for committee members Annex B (normative) Other deliverables Bibliography
South African Bureau of Standards. National Norm for the development of South African National Standards
ISBN 978-0-626-34155-8 South African Bureau of Standards National Norm for the development of South African National Standards WARNING This document references other documents normatively. Published by
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31185-8 SOUTH AFRICAN NATIONAL STANDARD Energy performance certificates for buildings WARNING This document references other documents normatively. Published by SABS Standards Division 1
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32353-0 SOUTH AFRICAN NATIONAL STANDARD Concrete roofing tiles WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25161-1 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part O: Lighting and ventilation Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31245-9 SOUTH AFRICAN NATIONAL STANDARD Drinking water Part 2: Application of SANS 241-1 WARNING This document references other documents normatively. Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32306-6 SOUTH AFRICAN NATIONAL STANDARD Prestressed concrete pipes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
Edition 2 WARNING. Tel: +27 SABSS
ISBN 978-0-626-31091-2 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 2-2: Requirements for systemic engineering and operational safety standards Track and associated civil infrastructure
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24057-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part M: Stairways Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25162-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part W: Fire installation Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31232-9 SOUTH AFRICAN NATIONAL STANDARD The warehousing of dangerous goods Part 2: The storage and handling of gas cylinders WARNING This document references other documents normatively.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25315-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part PR1: Determination of uncertainty of measurement, repeatability, reproducibility and bias Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26264-8 SOUTH AFRICAN NATIONAL STANDARD Tolerances permitted for the accuracy of measurements of products (including prepackaged products) in terms of legal metrology legislation Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25219-9 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part S: Facilities for persons with disabilities Published by SABS Standards Division 1 Dr Lategan
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25452-0 SOUTH AFRICAN NATIONAL STANDARD Ceramic wall and floor tiles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31441-5 SOUTH AFRICAN NATIONAL STANDARD Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 3: PVC Distribution cables WARNING
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34187-9 SOUTH AFRICAN NATIONAL STANDARD The wiring of premises Part 1-1: Low-voltage installation in medical locations WARNING This document references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD. Polypropylene (PP) pipes and pipe fittings for soil, waste and vent applications for above-ground use
ISBN 978-0-626-30862-9 SOUTH AFRICAN NATIONAL STANDARD Polypropylene (PP) pipes and pipe fittings for soil, waste and vent applications for above-ground use WARNING This document references other documents
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34816-8 ISO 14021:2016 SOUTH AFRICAN NATIONAL STANDARD Environmental labels and declarations Self-declared environmental claims (Type II environmental labelling) This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26737-7 SOUTH AFRICAN NATIONAL STANDARD Fire testing of materials, components and elements used in buildings Part 5: Non-combustibility at 750 C of building materials Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28157-1 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR10: Determination of the one-point liquid limit, plastic limit, plasticity index and linear shrinkage Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25224-3 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part X: Environmental sustainability Part XA: Energy usage in buildings Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32577-0 SOUTH AFRICAN NATIONAL STANDARD The design and installation of earth electrodes WARNING This document references other documents normatively. Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26403-1 SOUTH AFRICAN NATIONAL STANDARD Energy efficiency in buildings Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27074-2 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CC1: Concrete works (structural) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27661-4 SOUTH AFRICAN NATIONAL STANDARD Construction and management requirements for works contracts Part 1: General engineering and construction works Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34239-5 SOUTH AFRICAN NATIONAL STANDARD Electric welded low carbon steel pipes for aqueous fluids (large bore) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19416-1 SOUTH AFRICAN NATIONAL STANDARD Requirements for a Hazard Analysis and Critical Control Point (HACCP) system Published by Standards South Africa 1 dr lategan road groenkloof private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24814-7 SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 1: Artificial lighting of interiors Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26422-2 SOUTH AFRICAN NATIONAL STANDARD Processed meat products Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28415-2 ISO/TR 14969:2004 SOUTH AFRICAN NATIONAL STANDARD Medical devices Quality management systems Guidance on the application of ISO 13485:2003 This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24787-4 SOUTH AFRICAN NATIONAL STANDARD Hexagonal steel wire mesh gabions and revet mattresses Amdt 2 Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28259-2 SOUTH AFRICAN NATIONAL STANDARD Concrete masonry construction Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30730-1 ISO/IEC TR 20000-4:2010 SOUTH AFRICAN NATIONAL STANDARD Information technology Service management Part 4: Process reference model This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33574-8 SOUTH AFRICAN NATIONAL STANDARD Labelling requirements for prepackaged products (prepackages) and general requirements for the sale of goods subject to legal metrology control Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27369-9 SOUTH AFRICAN NATIONAL STANDARD Light steel frame building Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-626-28724-5 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part-GR50: Preparation, compaction and curing of specimens of laboratory mixed cementitiously stabilized materials Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27272-2 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CM1: Masonry walling Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31190-2 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part-GR54: Determination of the indirect tensile strength of compacted and cured specimens of cementitiously stabilized
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34399-6 ISO 28001:2007 SOUTH AFRICAN NATIONAL STANDARD Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26268-6 SOUTH AFRICAN NATIONAL STANDARD Construction works Part CS1: Structural steelwork Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31527-6 SOUTH AFRICAN NATIONAL STANDARD Welding of thermoplastics Testing and approval of welders WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29571-4 SOUTH AFRICAN NATIONAL STANDARD Aloe raw material WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31443-9 SOUTH AFRICAN NATIONAL STANDARD School furniture Amdt 6 Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32329-5 SOUTH AFRICAN NATIONAL STANDARD Firefighting equipment Part 1: Components of underground and above-ground hydrant systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30508-6 SOUTH AFRICAN NATIONAL STANDARD Bottled water of subterranean origin WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36621-6 ISO 45001:2018 SOUTH AFRICAN NATIONAL STANDARD Occupational health and safety management systems Requirements with guidance for use This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24018-9 SANS 11014:2010 ISO 11014:2009 SOUTH AFRICAN NATIONAL STANDARD Safety data sheet for chemical products Content and order of sections This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26989-0 SOUTH AFRICAN NATIONAL STANDARD Concrete floors Part 1: Bases to concrete floors Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26427-7 SOUTH AFRICAN NATIONAL STANDARD The installation of glazing in buildings Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31224-4 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part AS1: Making of asphalt briquettes for Marshall tests and other specialized tests WARNING This document references
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28723-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR40: Determination of the California bearing ratio Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32774-3 ISO 15970:2008 SOUTH AFRICAN NATIONAL STANDARD Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor This national standard
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26351-5 SOUTH AFRICAN NATIONAL STANDARD The production of mageu Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20961-2 SOUTH AFRICAN NATIONAL STANDARD The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations Published by Standards South Africa
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29240-9 SOUTH AFRICAN NATIONAL STANDARD The application of fumigants Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31226-8 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR31: Determination of the maximum dry density and optimum moisture content of laboratory mixed cementitiously
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33868-8 SOUTH AFRICAN NATIONAL STANDARD Cast iron surface boxes and manhole and inspection covers and frames Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23029-6 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Packaging and large packaging for road and rail transport Part 1: Packaging Published by SABS Standards Division 1 Dr
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26623-3 SOUTH AFRICAN NATIONAL STANDARD Construction and management requirements for works contracts Part 2: Accommodation of traffic on public roads occupied by the contractor Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28156-4 SOUTH AFRICAN NATIONAL STANDARD Civil engineering test methods Part GR1: Wet preparation and particle size analysis Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36205-8 ISO 4386-3:1992 SOUTH AFRICAN NATIONAL STANDARD Plain bearings Metallic multilayer plain bearings Part 3: Non-destructive penetrant testing This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24539-9 Edition 31 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Emergency information systems Part 3: Emergency response guides WARNING: Can only be used in conjunction with
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33589-2 SOUTH AFRICAN NATIONAL STANDARD Bed bases (spring upholstered) Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24539-9 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Emergency information systems Part 3: Emergency response guides WARNING: Can only be used in conjunction with the U.S.
SOUTH AFRICAN NATIONAL STANDARD
ICS 1.060.20 ISBN 0-626-14124-9 Edition 1.1 Any reference to SABS 1862 is deemed to be a reference to this standard (Government Notice No. 17 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Packaged
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26430-7 SOUTH AFRICAN NATIONAL STANDARD Basis of structural design and actions for buildings and industrial structures Part 3: Wind actions WARNING Can only be used in conjunction with SANS
SOUTH AFRICAN NATIONAL STANDARD
ICS 13.060.10; 93.020 ISBN 0-626-14801-4 SOUTH AFRICAN NATIONAL STANDARD Development, maintenance and management of groundwater resources Part 7: The rehabilitation of water boreholes Published by Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21901-7 SOUTH AFRICAN NATIONAL STANDARD Plywood and composite board Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20961-2 Edition 43 SOUTH AFRICAN NATIONAL STANDARD The petroleum industry Part 1: Storage and distribution of petroleum products in above-ground bulk installations Published by Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31402-6 SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 6: Rack-and-pinion lifts WARNING This document references other documents normatively.
ARP 22399:2008 Edition 1 ISO/PAS 22399:2007 Edition 1
ISBN 978-0-626-21571-2 ISO/PAS 22399:2007 STANDARDS SOUTH AFRICA Recommended practice Societal security Guideline for incident preparedness and operational continuity management This recommended practice
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29190-7 SOUTH AFRICAN NATIONAL STANDARD Water Dissolved solids content Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30521-5 ISO 21138-2:2007 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34802-1 Edition 3.1 IEC 60439-1:2004 Any reference to SABS IEC 60439-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL
SOUTH AFRICAN NATIONAL STANDARD
ICS 67.020 ISBN 0-626-17620-4 SANS 22000:2005 ISO 22000:2005 SOUTH AFRICAN NATIONAL STANDARD Food safety management systems Requirements for any organization in the food chain This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26428-4 SOUTH AFRICAN NATIONAL STANDARD Basis of structural design and actions for buildings and industrial structures Part 1: Basis of structural design Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ICS 91.220 ISBN 0-626-15672-6 SOUTH AFRICAN NATIONAL STANDARD The design, erection, use and inspection of access scaffolding Part 1: Steel access scaffolding Published by Standards South Africa 1 dr lategan
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25597-8 SOUTH AFRICAN NATIONAL STANDARD The structural use of steel Part 1: Limit-states design of hot-rolled steelwork Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-20611-6 SOUTH AFRICAN NATIONAL STANDARD The structural use of masonry Part 2: Structural design and requirements for reinforced and prestressed masonry WARNING To be used in conjunction
The importance of Standardization in and for Conformity assessment
The importance of Standardization in and for Conformity assessment Heleen Temple Date : 24 May 2012 sanas ISO SABS Standards Division IEC Technical Committees Stakeholder/ Customer SADCSTAN >500 SANS/yr
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34747-5 Any reference to SABS SM 1295 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Lime tests Carbon dioxide
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21491-3 Any reference to SABS 200 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Copper alloy ingots and castings
SOUTH AFRICAN NATIONAL STANDARD
ICS 11.020;13.030.30 ISBN 0-626-14901-0 SOUTH AFRICAN NATIONAL STANDARD Management of healthcare waste Published by Standards South Africa 1 dr lategan road groenkloof! private bag x191 pretoria 0001 tel:
SOUTH AFRICAN NATIONAL STANDARD
ICS 91.090 ISBN 0-626-15809-5 SANS 301-12:2004 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Fences Part 12: Specification for steel palisade fences This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30514-7 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods by road Operational requirements WARNING This document references other documents normatively. Table of changes Change
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27583-9 SOUTH AFRICAN NATIONAL STANDARD The warehousing of dangerous goods Part 8: The storage and handling of corrosive substances Warning Can only be used in conjunction with SANS 10263-0
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25353-0 SANS 1162:2011 SOUTH AFRICAN NATIONAL STANDARD Responsible tourism Requirements Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24057-8 SOUTH AFRICAN NATIONAL STANDARD The application of the National Building Regulations Part M: Stairways Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
ADOPTION OF INTERNATIONAL STANDARDS BY DEVELOPING COUNTRIES: SOUTH AFRICAN CASE STUDY
ADOPTION OF INTERNATIONAL STANDARDS BY DEVELOPING COUNTRIES: SOUTH AFRICAN CASE STUDY Presented By: Dr. Sebiletso Mokone-Matabane Date: 20 October 2008 developing countries draft1 10 Oct08 1 OVERVIEW 1.
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 30301 First edition 2011-11-15 Information and documentation records Requirements Information et documentation Systèmes de gestion des documents d'activité Exigences Reference
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36238-6 Edition 1 and EN amdt 1, nat. amdt 1 EN 795:1996 Edition 1 and amdt 1 SOUTH AFRICAN NATIONAL STANDARD Protection against falls from a height Anchor devices Requirements and testing
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 14470 First edition 2011-12-01 Food irradiation Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the
Steel and steel products Inspection documents
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10474 Second edition 2013-07-01 Steel and steel products Inspection documents Aciers et produits sidérurgiques Documents de contrôle Reference
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 21067-1 First edition 2016-10-15 Packaging Vocabulary Part 1: General terms Emballages Vocabulaire Partie 1: Termes généraux Reference number ISO 21067-1:2016(E) ISO 2016 ISO
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 22301 First edition 2012-05-15 Corrected version 2012-06-15 Societal security Business continuity management systems Requirements Sécurité sociétale Gestion de la continuité
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 6361-2 Fourth edition 2014-09-15 Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties Aluminium et alliages d aluminium corroyés Tôles,
ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing
INTERNATIONAL STANDARD ISO/IEC 17043 First edition 2010-02-01 Conformity assessment General requirements for proficiency testing Évaluation de la conformité Exigences générales concernant les essais d'aptitude
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 22514-7 First edition 2012-09-15 Statistical methods in process management Capability and performance Part 7: Capability of measurement processes Méthodes statistiques dans la
Information technology Security techniques Information security management systems Requirements
INTERNATIONAL STANDARD ISO/IEC 27001 Second edition 2013-10-01 Information technology Security techniques Information security management systems Requirements Technologies de l information Techniques de
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30933-6 Any reference to SABS SM 1257 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Microbiological examination