Electrical Solutions for the Water and Wastewater Industry
|
|
- Blaise Hopkins
- 6 years ago
- Views:
Transcription
1
2 Key Water/ Wastewater Business & Operation Drivers Business Drivers EPA Regulations Housing Market Weather Aging Infrastructure Operation Drivers Energy Efficiency Resource Recover Security Waste Reduction
3 T&B Engineered Solutions for Every Application Area Wastewater Treatment Lift Station Water Treatment Desalination Plant Grey Water Treatment Industrial Water Treatment Substation
4 T&B Chemical Industry Application Solutions Corrosion & Harsh Environment Protection Power Quality Efficiency & Reliability Continuous Operation & Sustainability Hazardous Location Protection Ground & Bounding Liquid Ingress Protection Safety & Contamination Extreme Temperature Protection
5 Corrosion & Harsh Environment Protection
6 T&B Solutions for Corrosion & Harsh Environment Protection Corrosion is the enemy of electrical systems. According to NACE International, corrosion costs the U.S. Water/Wastewater processing industry an estimated $1.3 billion annually. Problems caused by corrosion include: Equipment failure and shortened life Poor electrical system reliability caused by high-resistance connections Long maintenance repair time due to corroded parts Safety hazards at the grounding level and from product contamination Added labor expenses Ocal OCAL-BLUE PVC-Coated Conduit Hazlux HazCote Kynar Coated Lighting Fixtures Thomas & Betts brands for corrosion & harsh environment protection Adaptaflex Blackburn DTS Hazlux Kindorf Kopex-Ex Nicote Ocal PMA Red Dot Reznor Sta-Kon T&B Cable Tray Ty-Rap Ty-Rap Stainless Steel Cable Ties Kopex-Ex Stainless Steel Flexible Conduit and Liquidtight Fittings
7 T&B Solutions for Corrosion & Harsh Environment Protection Corrosion is a natural and inevitable process. It cannot be eliminated, but it can be managed and controlled with the right products. Stainless Steel Kindorf Channel and Accessories T&B Cable Tray Aluminum Cable Tray Kindorf Non-Metallic Modular Framing Channel and Accessories Ocal OCAL-BLUE PVC-Coated Conduit Thomas & Betts brands for corrosion & harsh environment protection Adaptaflex Blackburn DTS Hazlux Kindorf Kopex-Ex Nicote Ocal PMA Red Dot Reznor Sta-Kon T&B Cable Tray Ty-Rap PMA Nylon Cable Protection Systems Type 316 Stainless Steel Form 8 Conduit Bodies
8 Power Quality, Efficiency & Reliability
9 T&B Solutions for Power Quality, Efficiency & Reliability Water Treatment Maintaining service to motors, pumps and monitoring equipment is the difference between a smooth operation and a visit from the EPA. In this critical industry, the need for stable power is paramount. Thomas & Betts brands for power quality, efficiency & reliability Current Technology Cyberex Elastimold Fisher Pierce Joslyn Joslyn Hi-Voltage JT Packard Cyberex Industrial UPS Systems Joslyn Surge Protection Devices JT Packard Complete Power Solutions
10 Electrical Solutions for the Oil and Gas Industry T&B Solutions for Power Quality, Efficiency & Reliability In today s world, critical electrical equipment must be reliable and operational 24 hours a day, seven days a week. Thomas & Betts brands for power quality, efficiency & reliability Current Technology Cyberex Elastimold Fisher Pierce Joslyn Joslyn Hi-Voltage JT Packard Fisher Pierce Faulted Circuit Indicators Joslyn Switches and Reclosers Elastimold Switchgear and Cable Accessories
11 Electrical Solutions for the Water / Wastewater Industry Poll Question #1 For Water/ Wastewater corrosive environments, what product materials are being requested? A) Stainless Steel B) Non-metallic C) PVC coated D) Aluminum E) All of the above
12 Continuous Operation & Sustainability
13 T&B Solutions for Continuous Operation & Sustainability The production and fines associated with downtime in Water/ Wastewater operations can be substantial. Thomas & Betts brands for continuous operation & sustainability Blackburn Cyberex Elastimold Homac Blackburn Motor Lead Disconnects Cyberex Industrial UPS Systems Joslyn Joslyn Hi-Voltage JT Packard Kindorf Ocal PMA Russellstoll Sta-Kon T&B Cable Tray T&B Fittings Type A Liquidtight Flexible Conduit and Fittings PMA High-Temperature Nylon Conduit and Fittings
14 T&B Solutions for Continuous Operation & Sustainability In the single most demanding, non-stop operating environments, one single point of failure can lead to costly or even disastrous results. Thomas & Betts brands for continuous operation & sustainability Blackburn Cyberex Elastimold Homac Joslyn Joslyn Hi-Voltage JT Packard Kindorf Ocal PMA Russellstoll Sta-Kon T&B Cable Tray Russellstoll Pin-and-Sleeve Interconnections Ocal PVC-Coated Conduit Systems T&B Fittings Type A Non-Metallic Flexible Conduit and Fittings Sta-Kon Shrink-Kon Wire and Connector Insulation
15 Hazardous Location Protection
16 T&B Solutions for Hazardous Location Protection There is always a concern at Water/Wastewater installations about the significant presence of gases and vapors. Typical hazardous locations include: Water/ Wastewater plant process areas Booster stations and valve areas along pipelines Loading and unloading areas in terminals Storage areas for tanks, barrels and trucks Thomas & Betts brands for hazardous location protection All-Struct Cyberex DTS Emergi-Lite /Lightalarms EZCODE Hazlux Joslyn Kopex-Ex Nicote Russellstoll T&B Cable Tray DTS Area Lighting and Controls Russellstoll MaxGard Pin-and-Sleeve Connectors Kopex-Ex Stainless Steel Flexible Conduit Nicote Metal Cable Glands STAR TECK XP Stainless Steel and Aluminum Fittings
17 Grounding & Bonding
18 T&B Solutions for Grounding & Bonding Grounding the electrical system provides a means in which conductive equipment is connected to an earth potential via the grounding electrode. This prevents potential differences and sparking between conductive equipment and grounded structures. Thomas & Betts brands for grounding & bonding Blackburn Boreal Cyberex Elastimold EZCODE Fisher Pierce Furse Nicote Russellstoll Sta-Kon Blackburn Exothermic Welding System Blackburn Mechanical Grounding Connectors Blackburn E-Z-Ground Compression Connectors Boreal High-Quality Flexible Connectors Furse Grounding and Lightning Protection Systems
19 T&B Solutions for Grounding & Bonding An improperly installed or grounded electrical system can cause power failure, which often leads to significant safety, production and operational concerns. Thomas & Betts brands for grounding & bonding Blackburn Boreal Cyberex Elastimold EZCODE Fisher Pierce Furse Nicote Russellstoll Sta-Kon Sta-Kon Dragon Tooth Insulation- Piercing Connectors and Tools Steel City Grounding Pigtails, Clips and Mud Rings Blackburn Crimp Tools and Die Code Systems Grounding Fittings
20 Liquid Ingress Protection
21 T&B Solutions for Liquid Ingress Protection A single drop of oil seeping into an electrical control box is all it takes to knock out a Water/Wastewater facility s production line for days. Thomas & Betts brands for liquid ingress protection Adaptaflex DTS Emergi-Lite /Lightalarms Hazlux Homac Kopex-Ex Nicote Ocal PMA Red Dot Reznor Russellstoll Sta-Kon Homac Flood-Seal and Squid Products Russellstoll MaxGard Pin-and-Sleeve Connectors Stainless Steel Liquidtight Conduit and Cord Fittings Ocal OCAL-BLUE PVC-Coated NEMA Type 4X Form 8 Conduit Bodies
22 T&B Solutions for Liquid Ingress Protection The financial impact of allowing liquid to migrate into electrical systems can be significant whether the result of downtime or having to replace damaged components. Thomas & Betts brands for liquid ingress protection Adaptaflex DTS Emergi-Lite /Lightalarms Hazlux Homac Kopex-Ex Nicote Ocal PMA Red Dot Reznor Russellstoll Sta-Kon Red Dot Code Keeper Weatherproof While-In-Use Covers PMA Flexible Nylon Conduit Systems Homac Flood-Seal Multi-Port Connectors Sta-Kon Shrink-Kon Wire and Connector Insulation Products
23 Safety & Contamination
24 T&B Solutions for Safety & Contamination The goal of safety practices is zero accidents, zero injuries and zero deaths. The major stakeholders in safety solutions are: The state The business/organization The employee(s) The environment/society Thomas & Betts brands for safety & contamination All-Struct Blackburn Cyberex DTS Elastimold Emergi-Lite /Lightalarms EZCODE Fisher Pierce Furse Hazlux Hi-Tech Joslyn Joslyn Hi-Voltage JT Packard All-Struct Quick Pole Furse Grounding and Lightning Protection Systems Kindorf Ocal Red Dot Russellstoll Sta-Kon Superstrut Emergi-Lite /Lightalarms Emergency Lighting Systems EZCODE Safety Labels, Tags, Signs and Barricade Tapes Ty-Rap
25 T&B Solutions for Safety & Contamination No one is immune to safety and contamination concerns. Contamination and safety concerns are not market specific. They affect workers, production schedules and the bottom line across a broad spectrum of industries. Thomas & Betts brands for safety & contamination All-Struct Blackburn Cyberex DTS Elastimold Emergi-Lite /Lightalarms Ty-Rap Detectable Cable Ties Superstrut Channel and Accessories Blackburn TBM6SE Mechanical Crimp Tool DTS Area Lighting and Controls EZCODE Fisher Pierce Furse Hazlux Hi-Tech Joslyn Joslyn Hi-Voltage JT Packard Kindorf Ocal Red Dot Russellstoll Sta-Kon Superstrut Ty-Rap
26 Electrical Solutions for the Water / Wastewater Industry Poll Question #2 To increase Water/ Wastewater plant operational efficiency, what is most important to your customer? A) Downtime Reduction B) Equipment Life Span C) Maintenance and Labor Costs D) Plant Standardization E) Faster processing changeovers
27 Electrical Solutions for the Water / Wastewater Industry Extreme Temperature Protection
28 Electrical Solutions for the Water / Wastewater Industry T&B Solutions for Extreme Temperature Protection Electrical systems need to perform consistently in boiler rooms, furnace operations and around evaporators. Many of these processes require heat tracing to maintain elevated temperatures throughout Water/ Wastewater process systems. Thomas & Betts brands for extreme temperature protection Adaptaflex EZCODE Kopex-Ex PMA Sta-Kon Ty-Rap Ty-Rap Extra-High Temperature and Fluoropolymer Ties Sta-Kon High-Temperature Wire Joints and Terminals ATX Liquidtight Flexible Metal Conduit and Fittings PMA High-Temperature Nylon Conduit and Fittings
29 Electrical Solutions for the Water / Wastewater Industry Poll Question #3 What level of temperature protection is required for your customer s extreme temperature processing areas? A) -60 o C B) -40 o C C) 90 o C D) 105 o C E) 150 o C F) Other
30 Electrical Solutions for the Water / Wastewater Industry T&B Solutions for Extreme Temperature Protection Excessive heat or cold can wreak havoc on an electrical system, potentially causing critical components to fail. Thomas & Betts brands for extreme temperature protection Adaptaflex EZCODE Kopex-Ex PMA Sta-Kon Ty-Rap Kopex High-Temperature Conduit Systems Adaptaflex Extreme-Temperature Conduit XD Expansion Fitting Ty-Rap Cable Ties
31 Electrical Solutions for the Water / Wastewater Industry Poll Question #4 How can Thomas & Betts provide value to your customers? A) Reduced corrosion costs B) Downtime reduction C) Improve Power Quality D) Improved safety E) All of the above
32 Additional Services Offered by Thomas & Betts Product Specification Guide T&B Access Industry-Leading Distributor Portal Mobile Marketing Program Power & Grounding, Low- and High-Voltage Equipment T&B Technical Services ( ) T&B Tool Services ( TOOL)
33 Thank You!!! For more information about T&B s Oil and Gas vertical market initiative or featured products, please contact: Your local T&B Sales Representative T&B Customer Service at (800)
Elect rical rical Sol utions for Solutions the for Pul the p and Pul Paper p and Indu Paper Indu ry Electrical Division
Key Pulp and Paper Business Drivers Increase operational efficiencies and profitability Increase sustainability Increase personnel and environmental safety T&B Engineered Solutions for Every Application
More informationThomas & Betts products for pulp and paper processing facilities
Production downtime carries a high price tag in terms of man hours, raw materials and finished goods. Thomas & Betts offers electrical system solutions that can reduce downtime by 40 to 50%. What is your
More informationToday s global project management emphasizes how maintenance, replacement and downtime affect total cost. In oil and gas installations, the impact of
Today s global project management emphasizes how maintenance, replacement and downtime affect total cost. In oil and gas installations, the impact of maintenance and downtime costs is even higher. Challenge
More informationElectrical Solutions for Water and Wastewater Treatment Facilities
Electrical Solutions for Water and Wastewater Treatment Facilities In 2002 the EPA reported that mechanical and electrical systems for facility components such as treatment plants and pumping stations
More informationElectrical Solutions for Renewable Energy
Electrical Solutions for Renewable Energy 1 Generating electricity from renewable sources such as wind and solar is gaining momentum from the economics of grid parity as technology and demand become more
More informationThomas & Betts Solution Sets. Grounding & Bonding. Corrosion & Harsh Environment Protection. Power Quality, Efficiency & Reliability
Grounding & Bonding Thomas & Betts Solution Sets An improperly installed or grounded electrical system can cause power failure, which often leads to significant safety, production and operational concerns.
More informationThomas & Betts Solution Sets. Liquid Ingress Protection. Corrosion & Harsh Environment Protection. Grounding & Bonding
Thomas & Betts Solution Sets The financial impact of allowing liquid to migrate into electrical systems can be significant whether the result of downtime or having to replace damaged components. Liquid
More informationGrounding & Bonding A Global Leader in Innovative...
Grounding & Bonding A Global Leader in Innovative... Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology Thomas & Betts Solution Sets An improperly installed or
More informationLiquid Ingress Protection
Liquid Ingress Protection The financial impact of allowing liquid to migrate into electrical systems can be significant whether the result of downtime or having to replace damaged components. Thomas &
More informationElectrical Solutions for Single- and Multi-Family Housing A Global Leader in Innovative...
Electrical Solutions for Single- and Multi-Family Housing A Global Leader in Innovative... Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology Key concerns for
More informationExtreme Temperature Protection A Global Leader in Innovative...
Extreme Temperature Protection A Global Leader in Innovative... Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology Excessive heat or cold can wreak havoc on an
More informationKey concerns for residential structures Sustainability and energy efficiency Total project cost reduction Safety for occupants as well as installers
Key concerns for residential structures Sustainability and energy efficiency Total project cost reduction Safety for occupants as well as installers Valuable solutions for the construction, renovation
More informationCorrosion & Harsh Environment Protection
Corrosion & Harsh Environment Protection Corrosion is a natural and inevitable process. It cannot be eliminated, but it can be managed and controlled with the right products. Thomas & Betts Solution Sets
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 260526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section. 1.2 SUMMARY A. This Section
More informationPARTICULAR SPECIFICATION E11: GENERAL ELECTRICAL EARTHING AND LIGHTNING PROTECTION
E11 : General Electrical Earthing and LIGHTNING Protection PARTICULAR SPECIFICATION E11: GENERAL ELECTRICAL EARTHING AND LIGHTNING PROTECTION 1 2009-05-12 Review of Mechanical / Electrical and Control
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Updated format, division title, and removed references to other sections. - mgl44 A. Summary This section contains design criteria for the
More informationELECTRICAL SAFETY Information Bulletin
ELECTRICAL SAFETY Information Bulletin February 2019 Page 1 of 8 2018 CANADIAN ELECTRICAL CODE SUBJECT: Section 10 Grounding and bonding Rule 10-102 Grounding electrodes Replacing metal water service lines
More informationSECTION PART 1 GENERAL
SECTION 16060 GROUNDING AND BONDING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Grounding of electrical systems and equipment and basic requirements for ground for equipment, circuits, and systems.
More informationCutouts and Fuse Links Equipment to protect against faults and over-current conditions on power distribution systems. Open-Type Cutouts Linkbreak Cutouts Loadbreak Cutouts Cutout-Arrester Combinations
More informationELECTRICAL SAFETY Information Bulletin
ELECTRICAL SAFETY Information Bulletin March 2014 CEC-10 [rev-8] Page 1 of 8 CANADIAN ELECTRICAL CODE SUBJECT: Section 10 Grounding and Bonding Rule 10-204 Grounding Connections for Alternating-Current
More informationNEC 2014 Code Changes
NEC 2014 Code Changes Articles 280.21-300.50 CHANGES FROM 2011 TO 2014 CODE ARE IN RED Chapter 2 - Wiring and Protection ARTICLE 280 Surge Arresters, Over 1000 volts II. Instillation III. Connecting Surge
More informationTESTING PTE EARTHING
1 SCOPE This section of the Power Systems Live Working Manual details the procedures to be followed to achieve Safety from the System when carrying out examination, testing and remedial work on PTE (Pole
More informationT&B Steel Cable Tray Systems. Cable management solutions for industrial facilities
T&B Steel Cable Tray Systems Cable management solutions for industrial facilities Engineers, contractors and end users involved in the construction and maintenance of industrial facilities need to manage
More informationA. All materials shall be tested and listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).
16450 GROUNDING ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 05 26 An optional keynote to the
More informationFlexible Conduit Systems
Flexible Conduit Systems WHEN SAFETY MATTERS THERE S ONLY ONE CHOICE Complies to Australian & New Zealand Standards The Hi-Flex range of flexible conduit & fittings includes products tested to comply with
More informationSTAINLESS STEEL CABLE TIES & ACCESSORIES
STAINLESS STEEL CABLE TIES & ACCESSORIES Safer. Ty-Rap High Performance Stainless Steel Cable Ties Safer. Ty-Rap Stainless Steel Cable Ties have fully rounded, AISI #1 for safety no burrs, corners, or
More informationSECTION GROUNDING AND BONDING
SECTION 16060 PART 1 GENERAL 1.01 DESCRIPTION A. Section includes requirements for an electrical grounding system, including electrodes, grounding rods, connectors, insulators, equipment grounding and
More informationCONTENTS. B. System Design and Performance Requirements
16060 Grounding and Bonding This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or
More informationCOMPLETE REVISION January Process Industry Practices Electrical. PIP ELIGD000 Grounding Installation Details
COMPLETE REVISION January 2010 Process Industry Practices Electrical PIP ELIGD000 Grounding Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationMANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS
DAIMLERCHRYSLER MANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS ISSUE DATE: 5/1/90 EFFECTIVE DATE: 2/4/92 REVIEW DATE:
More informationDIVISION 26 ELECTRICAL Electrical Power Conductors and Cables
PART 1 - GENERAL 1.01 DESIGN REQUIREMENTS A. Scope: Power Conductors and Cables in this section are defined as system voltages above 120V and less than 600V. B. System Voltages Three Phase and Single Phase:
More informationSECTION WIRE AND CABLE Raceways and Conduit Motor Power and Control Wiring.
SECTION 16120 WIRE AND CABLE PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 16112 - Raceways and Conduit. 2. 16155 - Motor Power and Control Wiring. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:
More informationMars. Pendant & Surface
Mars Pendant & Surface IK 10 85 45 C 119540 119550 1195 40W 50W W 3300lm 4125lm 5363lm 1123 x 94 1123 x 94 1423 x 94 * Accessories to be ordered separately. Weather proof metallic body linear ED fixture.
More informationWIRE AND CABLE Raceways and Conduit Motor Power and Control Wiring.
SECTION 16120 WIRE AND CABLE PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 16112 - Raceways and Conduit. 2. 16155 - Motor Power and Control Wiring. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:
More informationInformation and Products for use in Food and Beverage Processing
Information and Products for use in Food and Beverage Processing Corrosive Extreme Temperatures Washdown Safety Continuous O peration Introduction As a food and beverage producer, you are striving for
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION GROUNDING
SECTION 16450 GROUNDING PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies general grounding and bonding requirements of electrical and telecommunication installations for personnel safety, equipment
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / 11-14
SECTION 270526 - GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSection ARMORED MEDIUM VOLTAGE CABLES SHIELDED 3 CONDUCTOR POWER CABLE - INTERLOCKED ARMOR
PART 1 - GENERAL Section 26 05 15 SHIELDED 3 CONDUCTOR POWER CABLE - INTERLOCKED ARMOR 1.1 Cable shall be 15 kv, shielded, three conductor with ground, stranded copper, with continuously welded and corrugated
More informationSECTION GROUNDING AND BONDING
SECTION 16060 GROUNDING AND BONDING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationELECTRICAL SAFETY INSPECTION REPORT.
ELECTRICAL SAFETY INSPECTION REPORT. SREERAMPUR, DHAKA, BANGLADESH Factory List: Graphics Textiles Limited Inspected on May 20, 2014 SUMMARY Graphics Textiles Limited is located in Sreerampur, Dhaka. Reportedly,
More informationRoxtec Cable and Pipe Sealing Solutions
Roxtec Cable and Pipe Sealing Solutions Applications Brochure Electrical Mechanical Instrumentation and Controls Communications Applications: Cable Trenches/ Pull Boxes Cabinets/ Enclosures Control House
More informationDIVISION 26 RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL RELATED DOCUMENTS
PART 1 - GENERAL 01.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification sections, apply to work of this Section.
More informationUNIVERSITY OF MISSOURI Electrical Manholes and Handholes 2016 Q1
GENERAL: The scope of this document is to provide instruction for the design and installation of medium voltage concrete electric manholes and handholes. DESIGN GUIDELINES: 1. Design for Manhole 1.1. The
More informationCS-21 STREET STRUCTURES TABLE OF CONTENTS
TABLE OF CONTENTS CS-21.0 Street Structures... 1 CS-21.1 Road Signs... 1 CS-21.2 Safety Barriers... 1 CS-21.3 Bollards and Removable Bollards... 1 CS-21.4 Pedestrian Barrier Rails and Handrails... 1 CS-21.5
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 262726 - WIRING DEVICES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section. 1.2 SUMMARY A. This Section includes the following: 1. Receptacles,
More informationService Entrance Cable Fittings
Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.
More informationMATERIAL SPECIFICATION FOR LUMINAIRE RAISING AND LOWERING EQUIPMENT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2476 JANUARY 1990 MATERIAL SPECIFICATION FOR LUMINAIRE RAISING AND LOWERING EQUIPMENT 2476.01 SCOPE 2476.02 REFERENCES 2476.05 MATERIALS TABLE OF CONTENTS
More informationPower Zone Center. Your solution for power distribution and control systems
Power Zone Center Your solution for power distribution and control systems The Strength of One Powerful When you need to install a new power distribution center in your facility, you need it done in fastest
More informationELECTRICAL SAFETY INSPECTION REPORT
ELECTRICAL SAFETY INSPECTION REPORT ABIR FASHIONS Kutubail, Fatullah (Post Office Road), Narayangonj, Bangladesh Factory List: 1. Inspected by: Pema Wangdi & Mamun Report Generated by: Pema Wangdi Inspected
More informationELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200 The GRD 4200 is an electronic earthing equipment for tankers during loading and unloading operations of flammable liquids in places with danger of explosion.
More informationSERIES 800 / 810 SPECIFICATION 15KV & 25KV PADMOUNTED LIQUID-INSULATED VACUUM LOAD INTERRUPTER ASSEMBLIES
SERIES 800 / 810 SPECIFICATION 15KV & 25KV PADMOUNTED LIQUID-INSULATED VACUUM LOAD INTERRUPTER ASSEMBLIES MANUALLY OPERATED / REMOTELY OPERATED DEAD FRONT PADMOUNTED SWITCHGEAR WITH VACUUM LOAD INTERRUPTING
More informationCignal-owned Tower Sites Tower Operations & Rigging Policy
Cignal-owned Tower Sites Tower Operations & Rigging Policy June 2016 Table of Contents 1 Introduction... 3 2 Process for Equipment Addition or Amendment... 4 2.1 Application for Equipment Addition or Amendment...
More informationEarthing in electrical network purpose, methods and measurement
Earthing in electrical network purpose, methods and measurement Earth / Ground Conductive ground whose electrical potential at each point is set equal to zero, It is a conductor which provides a low impedance
More informationSolutions for food and beverage Uncompromised hygiene, reliability and productivity
Solutions for food and beverage Uncompromised hygiene, reliability and productivity Power and productivity for a better world ABB is a leader in power and automation technologies that enable utility, industry,
More informationPressure Booster System. Hya-Eco VP. Type Series Booklet
Pressure Booster System Hya-Eco VP Type Series Booklet Legal information/copyright Type Series Booklet Hya-Eco VP KSB Aktiengesellschaft Frankenthal All rights reserved. Contents provided herein must neither
More informationSECTION A. Underwriters Laboratories, Inc., listed and NEC approved
PART 1 GENERAL 1.01 DESCRIPTION A. Provide all raceways, fittings, and boxes of specified type required for complete project. Install all systems in raceways unless specifically noted otherwise. Provide
More informationSECTION PIER 94 HIGH MAST LIGHTING. A. Replace existing high mast lighting poles M and N located at Pier 94.
SECTION 16530 PIER 94 HIGH MAST LIGHTING PART 1 - GENERAL 1.01 SCOPE A. Replace existing high mast lighting poles M and N located at Pier 94. B. Provide templates of existing pole foundation M and N to
More informationDesign Standard Conduit for Electrical Systems
Design Standard Purpose: This design standard has the purpose of creating a consistent application for the installation of conduits throughout the East Side Union High School District, therefore achieving
More informationDETAILED SCOPE OF WORK IN-STREAM TIDAL GENERATING PLANT TISEC COLLECTOR CIRCUITS DEVELOPMENT
PAGE I TABLE OF CONTENTS SECTION DESCRIPTION PAGE 1 GENERAL 1 1.1 OVERVIEW 1 1.2 PREPARATORY WORK CARRIED OUT BY OTHERS 2 1.3 MATERIALS TO BE SUPPLIED BY THE OWNER 2 1.4 PROJECT SCHEDULE 3 1.5 PROJECT
More informationMREC March, 2005 Powering the Dairy Industry
Mark A. Cook Manager Licensed Designer of Engineering Systems Certified Commercial and UDC Electrical Inspector Certified Master Electrician Public Service Commission of Wisconsin mark.cook@starband.net
More informationELECTRICAL SAFETY Information Bulletin
ELECTRICAL SAFETY Information Bulletin March 2014 CEC-12 [rev-6] Page 1 of 6 CANADIAN ELECTRICAL CODE SUBJECT: Section 12 Wiring Methods Conductors General Insulation Thickness on Conductors Used in Ungrounded
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationNYULMC AMBULATORY CARE CENTER FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: Issued for GMP March 15, 2017
SECTION 27 05 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationCONSULTANT PROCEDURES & DESIGN GUIDELINES Electrical Manholes and Handholes UNIVERSITY OF MISSOURI
GENERAL: The scope of this document is to provide instruction for the installation of concrete electric manholes. DESIGN GUIDELINES: 1. Materials for Manhole 1.1. Cast-in-Place or Pre-Cast concrete may
More informationQuality. Reliability. Durability.
3 Quality. Reliability. Durability. i We Understand the Value of Your Time. This catalog is designed to make it easier for you to find the products you re looking for. The following diagrams point out
More informationThe complete guide to transformers and packaged substations
LAND LOGICAL POWER The complete guide to transformers and packaged substations Contents Land Logical Power transformers An introduction to the complete range of Land Logical Power transformers and package
More informationPressure Booster System. Hya-Eco VP. Type Series Booklet
Pressure Booster System ya-eco VP Type Series Booklet Legal information/copyright Type Series Booklet ya-eco VP All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationTHE POWER OF T&B ENGINEERED PRODUCTS AND SERVICES
Thomas & BettsMORE POWER TO YOU For over 70 years, Canadian electrical contractors, plant engineers and engineering consultants have placed their trust in Thomas & Betts electrical components. Today, Thomas
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More informationEnsure no person makes contact with the steel pole streetlight or temporary earth electrode while the testing procedures are being undertaken.
NOTE: SAFETY: Tests must be carried out after the installation, alteration or repair and before putting back to service. At all times maintain suitable clearance to all other electrical equipment and verify
More informationRN Optical Termination Panel (RN OTP)
RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.
More informationPLANNING GUIDE FOR SINGLE CUSTOMER SUBSTATIONS SERVED FROM TRANSMISSION LINES
Prepared by: NIB/EOB PLANNING GUIDE FOR SINGLE CUSTOMER SUBSTATIONS SERVED FROM TRANSMISSION LINES 05503 Department: Electric T&D Section: T&D Engineering and Technical Support Approved by: G.O. Duru (GOD)
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationSECTION FACILITY LIGHTNING PROTECTION
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 41 00 FACILITY LIGHTNING PROTECTION SPEC WRITER NOTE: Delete between //----//if not applicable to project. Also delete any other item or paragraph not applicable
More informationUnderground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11
Underground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11 Underground Residential Distribution (URD) Index General Discussion... 1-2 Description... 3-7 Drawings (Available
More informationCONSTRUCTION SPECIFICATION FOR CABLE INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 604 NOVEMBER 2004 CONSTRUCTION SPECIFICATION FOR CABLE INSTALLATION TABLE OF CONTENTS 604.01 SCOPE 604.02 REFERENCES 604.03 DEFINITIONS - Not Used
More informationCONSTRUCTION SPECIFICATION FOR INSTALLATION OF CABLE
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 604 NOVEMBER 2017 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF CABLE TABLE OF CONTENTS 604.01 SCOPE 604.02 REFERENCES 604.03 DEFINITIONS - Not Used
More informationInformation and Products for use in Food and Beverage Processing
Information and Products for use in Food and Beverage Processing Introduction As a food and beverage producer, you are striving for consistent quality regardless of where your product is manufactured or
More informationAn Overview of Earthing
2018 Earthing An Overview of Earthing Gary Blackshaw, Global Business Development Manager Founded by William Joseph Furse Originally as a Steeplejack company Relocated to Traffic Street More emphasis on
More informationMetal Framing Channels Overview
New Trivalent Galv-Krom Finish Is RoHS Compliant Thomas & Betts is proud to introduce the new and improved Trivalent Galv-Krom finish. Galv-Krom finish is a combination of.5 mils electro-plated Zinc and
More informationTYPICAL INSTALLATION INSTRUCTIONS
TYPICAL INSTALLATION INSTRUCTIONS Environment One Grinder Pump Feature Identification 1. Grinder Pump Basin High density polyethylene (HDPE) 2. Accessway Cover Painted Steel 3. Electrical Quick Disconnect
More informationSERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS
SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS INDIANA UNIVERSITY BIDDING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 (REVISED 2005) MINORITY,
More informationThe Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999
CANADIAN ELECTRICAL CODE 1 The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999 Repealed by Chapter E-6.3 Reg 8 (effective June 24, 2003). Formerly Chapter E-6.3 Reg 6 (effective March
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 27 0526 - TECHNOLOGY GROUNDING SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENT A. Drawing and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specifications,
More informationOVERHEAD SERVICES - SECONDARY
OVERHEAD SERVICES - SECONDARY Contents - Overhead Services... O-1 General Requirements for Overhead Service... O-2 Names of Parts for Overhead Service... O-3 Service Attachment on an Unguyed Service Mast...
More informationCABLE TRAY SOLUTIONS OIL & GAS
CABLE TRAY SOLUTIONS OIL & GAS Maximize Returns with Innovative System Solutions Oil & Gas Industry The oil and gas industry demands performance from components used in electrical infrastructure. Thomas
More informationB. Provide a complete conduit system with associated couplings, connectors, and fittings.
SECTION 26 05 33 PART 1 - GENERAL 1.01 WORK INCLUDED A. Comply with the provisions of Sections 260500. B. Provide a complete conduit system with associated couplings, connectors, and fittings. 1.02 RELATED
More informationThomas & Betts LT & CORD FITTINGS
Thomas & Betts LT & CORD FITTINGS Thomas & Betts Liquid Tight Sure Tight Gland Double Beveled Sealing Ring Safe Edge Ground Cone Threaded Connector Case Hardened Locknut 8Feature / Benefit Sure Tight Gland
More informationSection 7: Specifications
Section 7: Specifications 29 31 Building Boundary of Clear Area See Note # 1 8' Shrubs 8' Concrete Pad Equipment 8' TRAVELED WAY M Meter Pedestal 8' Curb Protective Vehicle Posts (Bollards) If Required
More informationOPERATING PROCEDURE NO. 310
OPERATING PROCEDURE NO. 310 Related Operating Procedures: 310A; 310B; 310C; 310D SUBJECT: Conditions of Service Issued: February 10, 2014 Revised: March 28, 2016 OBJECTIVE: To establish the rules, regulations
More informationArc Welding and Cutting OSHA Standard
ABE280 Arc Welding and Cutting OSHA Standard 1910.254 1 Carol J. Lehtola and Charles M. Brown 2 The Impact of Safety on Florida Agriculture Florida agriculture, including forestry and fishing, made an
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-33 77 19.00 40 (August 2016) --------------------------------- Preparing Activity: NASA Superseding UFGS-33 77 19.00 40 (August 2013) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationElectrical Grounding In Mining Applications
Electrical Grounding In Mining Applications Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq The mining industry
More informationELECTRICAL SAFETY INSPECTION REPORT
ELECTRICAL SAFETY INSPECTION REPORT ADVANCE WORLD LIMITED Lalkha Shair Char, Fatullah, Narayanganj, Dhaka, Bangladesh Factory List: 1.. Inspected by: Sherub Tenzin & Md. Moin Hasan Report Generated by:
More informationRevision 1 RAM ELEVATORS. Elevator Electrical Planning Guide. RAM Manufacturing Ltd
RAM ELEVATORS Elevator Electrical Planning Guide This guide is intended for people with an understanding of electricity. If you are not, please consult a licensed electrician as errors in application of
More informationELECTRICAL SAFETY FOLLOW UP INSPECTION REPORT (4th)
Factory Name Address Joyna Bazer Road, Jamirdia, Valuka Factory ID 9504 Electrical Safety dates Initial Date 06/07/2014 Date of 5 th Follow Up Report Received Date 07/27/2015 Date of 6 th Follow Up Date
More informationDuke Energy Carolinas Distribution Construction Standards Reference Guide
Duke Energy Carolinas Distribution Construction Standards Reference Guide The Duke Energy Carolinas (DEC) Distribution Construction Standards are available on the My Duke Energy Contractor Portal. Access
More informationSECTION 807 PUMP STATION REHABILITATION
SECTION 807 PUMP STATION REHABILITATION 807-1 DESCRIPTION: Rehabilitation of pump stations shall be defined as the cleaning, removal, repair and/or replacement of any and/or all components including but
More informationTABLE OF CONTENTS CHAPTER 2 WIRING AND PROTECTION CHAPTER 1 GENERAL RULES... 19
TABLE OF CONTENTS About This Textbook... xvii How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
More information