Hygienic design. Hygienic antislip gratings. All internal radii equal or larger than 3mm which greatly increases cleaning effectiveness

Size: px

Start display at page:

Download "Hygienic design. Hygienic antislip gratings. All internal radii equal or larger than 3mm which greatly increases cleaning effectiveness"

Octavia Nichols
6 years ago
Views:

Ý±²»² ² ±¼«½ ±² ßÝÑ ¹»² ½ ¹«ïìî ßÝÑ ¹»² ½ ¹«ïëé ßÝÑ ¹»² ½ ¹«îïè ÛÙïëð Ù

±² ± îî Ì»» ½± ½ ª» ½ ± îì Ì»» ½± ½ ± ±² ± îé Ù«±»» ½± ½ íð Î ²¹»½»»» ½±

ìî Ù«±»» ½± ½ ìë Î ²¹»½»»» ½± ½ ìé Ú»¼» ¹ ª» ½ ± ìè Ú»¼» ¹ ± ±² ± ëð Ì»»

½ ª» ½ ± ëç Ì»» ½± ½ ± ±² ± êð Ù ²¹ º± ¹«± îðð îðð êï Ù ²¹ º± ¹«± îëð îëð

ß½½» ±» º± ßÝÑ ¹»² ½ ¹«ïìî éî ß½½» ±» º± ßÝÑ ¹»² ½ ¹«ïëé éí ß½½» ±» º±

1 Ý±²»² ² ±¼«½ ±² ßÝÑ ¹»² ½ ¹«ïìî ßÝÑ ¹»² ½ ¹«ïëé ßÝÑ ¹»² ½ ¹«îïè ÛÙïëð Ù ²¹ß½½» ±» Ð ¹» Ø ¹»² ½ ¼» ¹² ïè Í»³ ±ª» ª» ïç Ú»¼» ¹ ª» ½ ± îð Ú»¼» ¹ ± ±² ± îî Ì»» ½± ½ ª» ½ ± îì Ì»» ½± ½ ± ±² ± îé Ù«±»» ½± ½ íð Î ²¹»½»»» ½± ½ íí Ú»¼» ¹ ª» ½ ± íì Ú»¼» ¹ ± ±² ± íé Ì»» ½± ½ ª» ½ ± íç Ì»» ½± ½ ± ±² ± ìî Ù«±»» ½± ½ ìë Î ²¹»½»»» ½± ½ ìé Ú»¼» ¹ ª» ½ ± ìè Ú»¼» ¹ ± ±² ± ëð Ì»» ½± ½ ª» ½ ± ëï Ì»» ½± ½ ± ±² ± ëì Ù«±»» ½± ½ ëê Î ²¹»½»»» ½± ½ ëè Ì»» ½± ½ ª» ½ ± ëç Ì»» ½± ½ ± ±² ± êð Ù ²¹ º± ¹«± îðð îðð êï Ù ²¹ º± ¹«± îëð îëð êì Ù ²¹ º± ¹«± íðð íðð êé Ù ²¹ º± ª ² ± Hïéð éð Ù ²¹ º± ª ² ± Hîîî éï ß½½» ±» º± ßÝÑ ¹»² ½ ¹«ïìî éî ß½½» ±» º± ßÝÑ ¹»² ½ ¹«ïëé éí ß½½» ±» º± ßÝÑ ¹»² ½ ¹«îïè éì ß½½» ±» º± ÛÙïëð éë Ú ±» ²¼ Ý±² «½ ±²» ¹ Ú ±» ²¼ Ý±² «½ ±²» ¹ éê ïé

² ±¼«½ ±² Ø ¹»² ½ ¼» ¹² Hygienic design CO hygienic drainage fulfils strongest hygienic requirements to prevent harmful bacterial contamination.

4301 according to EN 10088 (304 according to ISI) Fully pickled and passivated Hygienic antislip gratings ll internal radii equal or larger than

harbour dangerous bacteria Full drainability: Dry sump design, completely drainable - eliminating stagnant water, smells, microbial growth and

2 ² ±¼«½ ±² Ø ¹»² ½ ¼» ¹² Hygienic design CO hygienic drainage fulfils strongest hygienic requirements to prevent harmful bacterial contamination. We apply the relevant hygienic design principles reserved for food processing equipment EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 to the gully design. ¹»² ½ º» æ Full drainability Internal radii equal or larger than 3 mm Hygienic joints Edge infill Stainless steel grade min according to EN (304 according to ISI) Fully pickled and passivated Hygienic antislip gratings ll internal radii equal or larger than 3mm which greatly increases cleaning effectiveness Hygienic joints: deep-drawn body ensures smooth contours eliminating crevices that can harbour dangerous bacteria Full drainability: Dry sump design, completely drainable - eliminating stagnant water, smells, microbial growth and potential chemical hazards. Edge in-fill ensures stable and durable transmission between the gully and surrounding floor and helps to minimize risk of floor cracks which could harbour microorganism Foul air trap without overlapped joints Foul air trap internal corners smooth and rounded ïè

² ±¼«½ ±² Í»³ ±ª» ª» System overview CO gully range is available in a number of versions

an important role in the selection of the appropriate type of gully.

Fixed height gullies are convenient and free-standing units which are suitable for

Telescopic gullies can be installed either with a gully top or CO channel in most flooring

3 ² ±¼«½ ±² Í»³ ±ª» ª» System overview CO gully range is available in a number of versions featuring different flow rates, grating designs, sizes and spigot outlet diameters to suit various applications. The floor construction and depth together with the use of any waterproofing membrane play an important role in the selection of the appropriate type of gully. The CO gully range is available with vertical or horizontal spigot outlets. Fixed height gullies are convenient and free-standing units which are suitable for cementitious, resin or tiled floors. Telescopic gullies can be installed either with a gully top or CO channel in most flooring constructions, including floors with waterproofing membranes. Fixed height solution Telescopic solution Gratings Silt basket Foul air trap Foul air trap support CO gully body Gully top Friction ring Leveling feet 5 ïç

ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ ª» ½ ± Fixed height vertical outlet Product information Fixed height gully can be speci ed as a point drainage in areas where waterproofing is independent of the gully body.

4 ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ ª» ½ ± Fixed height vertical outlet Product information Fixed height gully can be speci ed as a point drainage in areas where waterproofing is independent of the gully body. Those gullies can be combined with different grates depending on requested load class. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Fire tested and certified solution available for classes EI 90 EI 180 (EN ) Fully removable and easily cleanable stainless steel foul air trap (FT) Outlet diameter DN 70/DN 100 (75 mm or 110 mm O.D.) Wide range of gratings including antislip solution Order information Ì±» Å³³Ã H Å³³Ã Ú±«Í ²¼ ¼ Héë Hïìî 200 x Hïïð Hïìî 200 x îð Gratings for gully top 200 x 200 mm Page 61 ccessories for CO hygienic gully 142 Page 72

5 ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ ª» ½ ± Ì±» Å³³Ã H Å³³Ã Ú±«Û»²¼»¼»¼¹» Héë Hïìî 200 x Hïïð Hïìî 200 x Gratings for gully top 200 x 200 mm Page 61 ccessories for CO hygienic gully 142 Page 72 îï

ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ ± ±² ± Fixed height horizontal outlet Product information Fixed height gully can be speci ed as a point drainage in areas where waterproofing is independent of the gully body.

6 ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ ± ±² ± Fixed height horizontal outlet Product information Fixed height gully can be speci ed as a point drainage in areas where waterproofing is independent of the gully body. Those gullies can be combined with different grates depending on requested load class. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Fully removable and easily cleanable stainless steel foul air trap (FT) Outlet diameter DN 70/DN 100 (75 mm or 110 mm O.D.) Wide range of gratings including antislip solution Order information Ì±» Å³³Ã H Å³³Ã Ú±«Í ²¼ ¼»¼¹» ïìî ïìç x ïìî ïèï x îî Gratings for gully top 200 x 200 mm Page 61 ccessories for CO hygienic gully 142 Page 72

7 ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ ± ±² ± Ì±» Å³³Ã H Å³³Ã Ú±«Û»²¼»¼»¼¹» ïìî ïìç 200 x ïìî ïèï 200 x Gratings for gully top 200 x 200 mm Page 61 ccessories for CO hygienic gully 142 Page 72 îí

ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information Telescopic gully can be combined either with gully tops or with linear drainage channels.

8 ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information Telescopic gully can be combined either with gully tops or with linear drainage channels. Telescopic solution enables height and rotational adjustment of connected gully top or channel. Gullies are equipped with flanges for connection of waterproof membrane. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Fire tested and certified solution available for classes EI 90 EI 180 (EN ) Fully removable and easily cleanable stainless steel foul air trap (FT) Outlet diameter DN 70/DN 100 (75 mm or 110 mm O.D.) Telescopic friction ring included Wide range of gratings including antislip solution Order information Ì» ±º º ²¹» H Å³³Ã Ú±«Hïêì Héë Hïìî Location flange Híìì Héë Hïìî dhesive bonding flange îì ccessories for CO hygienic gully 142 Page 72

9 ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ª» ½ ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híìì Héë Hïìî Mechanical clamping flange Hïêì Hïïð Hïìî Location flange Híìì Hïïð Hïìî dhesive bonding flange ccessories for CO hygienic gully 142 Page 72 îë

10 ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ª» ½ ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híìì Hïïð Hïìî Mechanical clamping flange îê ccessories for CO hygienic gully 142 Page 72

ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information Telescopic gully can be combined either with CO gully top or CO channel in most flooring constructions.

11 ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information Telescopic gully can be combined either with CO gully top or CO channel in most flooring constructions. Telescopic solution enables height and rotational adjustment of connected gully top or channel. Gullies are equipped with flanges for connection of waterproof membrane. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Gully top frame size: 200 x 200 mm Outlet diameter DN 70/DN 100 (75 mm or 110 mm O.D.) Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp Telescopic friction ring included Order information Ì» ±º º ²¹» H Å³³Ã Ú±«Hïêì ïìî ïëï With location flange Híìì ïìî ïìç With adhesive bonding flange ccessories for CO hygienic gully 142 Page 72 îé

12 ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ± ±² ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híìì ïìî ïìç With mechanical clamping flange Hïêì ïìî ïèï With location flange Híìì ïìî ïèï With adhesive bonding flange îè ccessories for CO hygienic gully 142 Page 72

13 ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ ± ±² ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híìì ïìî ïèï With mechanical clamping flange ccessories for CO hygienic gully 142 Page 72 îç

14 ßÝÑ ¹»² ½ ¹«ïìî Ù«±»» ½± ½ Ù«±»» ½± ½ Product information Gully top can be combined with telescopic gully. Different gully top types are available depending on floor structure. vailable in (304) or (316L) grades of stainless steel Wide range of gratings to load class L 15 M 125 (EN 1253) or C 250 (EN 124) including antislip solution Order information îðð Ù«±» Ù«±» [mm] èï Hïîë Standard edge 200 x íðð îðð èï îð Hïîë Extended edge 200 x íðð îðð èï îð Hïîë Extended top with drainage holes 200 x íð Gratings for gully top 200 x 200 mm Page 61

15 ßÝÑ ¹»² ½ ¹«ïìî Ù«±»» ½± ½ Ù«±» Ù«±» [mm] è ïìç éë!ó!ïïð Hïîë Plastic top with stainless steel grating (K3) 149 x 149 Plastic è ïìè èë!ó!ïîð Hïîë MEKU top with stainless steel grating (K3) 148 x 148 Plastic è ïìè ïïë Hïîë Square top with stainless steel grating (K3) 148 x Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. Gratings for gully top 200 x 200 mm Page 61 íï

16 ßÝÑ ¹»² ½ ¹«ïìî Ù«±»» ½± ½ Ù«±» Ù«±» [mm] îðð ïëð Hïîë ïîë Plastic top with stainless steel grating (K3) 150 x 150 Plastic ïìè ëðð èñïï çï Hïîë Plastic thin-bed top with sliding frame and stainless steel grating (K3) 148 x 148 Plastic îéï ïìè ïìð ïïë îð Hïîë Square top with sanded flange and stainless steel grating (K3) 148 x Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. íî Gratings for gully top 200 x 200 mm Page 61

ßÝÑ ¹»² ½ ¹«ïìî Î ²¹»½»»» ½± ½ Î ²¹»½»»» ½± ½ Product information Raising piece can be used for floor structures where multi waterproofing is needed (heat insulation) or where construction height of

17 ßÝÑ ¹»² ½ ¹«ïìî Î ²¹»½»»» ½± ½ Î ²¹»½»»» ½± ½ Product information Raising piece can be used for floor structures where multi waterproofing is needed (heat insulation) or where construction height of the slab needs to be increased. Variaty of flanges for membranes vailable in grades (304) or (316L) of stainless steel Order information éë Hïêì Hïîë Hïìî Ì» ±º º ²¹» Location flange Híìì Hïîë dhesive bonding flange Híìì Hïîë Mechanical clamping flange ccessories for CO hygienic gully 142 Page 72 íí

ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ ª» ½ ± Fixed height vertical outlet Product information Fixed height gully can be specified as a point drainage in areas where waterproofing is independent of the gully body.

8, 13 and 44 Tested and certified according to EN 1253 vailable in 1.4301 (304) or 1.

18 ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ ª» ½ ± Fixed height vertical outlet Product information Fixed height gully can be specified as a point drainage in areas where waterproofing is independent of the gully body. Those gullies can be combined with different grates depending on requested load class. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Wide range of gratings including antislip solution Fully removable stainless steel FT Fire tested and certified solution available for classes EI 90 EI 180 (EN ) Gully top frame size: 200 x 200 mm or 250 x 250 mm Outlet diameter DN 70/DN 100 (75 mm or 110 mm O.D.) Order information Ì±» Å³³Ã H Å³³Ã Ú±«Í ²¼ ¼»¼¹» Héë Hïëé 200 x íì Gratings for gully top 200 x 200 mm Page 61 ccessories for CO hygienic gully 157 Page 73

19 ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ ª» ½ ± Ì±» Å³³Ã H Å³³Ã Ú±« Héë Hïëé 250 x Hïïð Hïëé 200 x Hïïð Hïëé 250 x Gratings for gully top 200 x 200 mm Page 61 Gratings for gully top 250 x 250 mm Page 64 ccessories for CO hygienic gully 157 Page 73 íë

20 ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ ª» ½ ± Ì±» Å³³Ã H Å³³Ã Ú±«Û»²¼»¼»¼¹» Héë Hïëé 200 x Hïïð Hïëé 200 x íê Gratings for gully top 200 x 200 mm Page 61 ccessories for CO hygienic gully 157 Page 73

21 ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ ± ±² ± Fixed height horizontal outlet Product information Fixed height gully can be specified as a point drainage in areas where waterproofing is independent of the gully body. Those gullies can be combined with different grates depending on requested load class. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Gully top frame size: 200 x 200 mm or 250 x 250 mm Outlet diameter DN 70/DN 100 (75 mm or 110 mm O.D.) Wide range of gratings including antislip solution Order information Ì±» Å³³Ã H Å³³Ã Ú±«Í ²¼ ¼»¼¹» ïëé ïêç 200 x ïëé ïêç x Gratings for gully top 200 x 200 mm Page 61 Gratings for gully top 250 x 250 mm Page 64 ccessories for CO hygienic gully 157 Page 73 íé

22 ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ ± ±² ± Ì±» Å³³Ã H Å³³Ã Ú±« ïëé ïêç 200 x ïëé ïêç 250 x Û»²¼»¼»¼¹» ïëé ïêç 200 x ïëé ïêç 200 x íè Gratings for gully top 200 x 200 mm Page 61 Gratings for gully top 250 x 250 mm Page 64 ccessories for CO hygienic gully 157 Page 73

ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information Telescopic gully can be combined either with gully top or CO channel in most flooring constructions.

23 ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information Telescopic gully can be combined either with gully top or CO channel in most flooring constructions. Telescopic solution enables height and rotational adjustment of connected gully top or channel. Gullies are equipped with flanges for connection of waterproof membrane. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Gully top frame size: 200 x 200 mm or 250 x 250 mm Outlet diameter DN 70/DN 100 (75 mm or 110 mm OD) Telescopic friction ring included Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp Fire tested and certified solution available for classes EI 90 EI 180 (EN ) Order information Ì» ±º º ²¹» H Å³³Ã Ú±«Hïèî Héë Hïëé Location flange ccessories for CO hygienic gully 157 Page 73 íç

24 ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ª» ½ ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híëè Héë Hïëé dhesive bonding flange Híëè Héë Hïëé Mechanical clamping flange Hïèî ïéð îêç Location flange 110 Hïïð Hïëé ìð ccessories for CO hygienic gully 157 Page 73

25 ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ª» ½ ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híëè Hïïð Hïëé dhesive bonding flange Híëè Hïïð Hïëé Mechanical clamping flange ccessories for CO hygienic gully 157 Page 73 ìï

ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information Telescopic gully can be combined either with gully top or CO channel in most flooring constructions.

26 ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information Telescopic gully can be combined either with gully top or CO channel in most flooring constructions. Telescopic solution enables height and rotational adjustment of connected gully top or channel. Gullies are equipped with flanges for connection of waterproof membrane. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Suitable for all floor types including vinyl flooring Outlet diameter DN 70/DN 100 (75 mm or 110 mm OD) Telescopic friction ring included Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp Order information Ì» ±º º ²¹» H Å³³Ã Ú±«Hïèî ïëé ïêç Location flanget ìî ccessories for CO hygienic gully 157 Page 73

27 ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ± ±² ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híëè ïëé ïêè dhesive bonding flange Híëè ïëé ïêè Mechanical clamping flange Hïèî ïëé ïêç Location flange ccessories for CO hygienic gully 157 Page 73 ìí

28 ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ± ±² ± Ì» ±º º ²¹» H Å³³Ã Ú±«Híëè ïëé ïêç dhesive bonding flange Híëè ïëé ïêç Mechanical clamping flange ìì ccessories for CO hygienic gully 157 Page 73

ßÝÑ ¹»² ½ ¹«ïëé Ù«±»» ½± ½ Ù«±»» ½± ½ Product information Gully top can be combined with telescopic gully. Different gully top type is available depending on floor structure.

29 ßÝÑ ¹»² ½ ¹«ïëé Ù«±»» ½± ½ Ù«±»» ½± ½ Product information Gully top can be combined with telescopic gully. Different gully top type is available depending on floor structure. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Square gully tops 200 x 200 or 250 x 250 for load class L 15; M 125 or C 250 vailable in grades (304) or (316L) of stainless steel Wide range of gratings to Load Class L 15 M 125 (EN 1253) or C 250 (EN 124) including antislip solution Order information Ù«±» Ù«±» [mm] Ø142 Standard edge 200 x Ø142 Standard edge 250 x Ø Ø142 Vinyl edge Ø Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. Gratings for gully top 200 x 200 mm Page 61 Gratings for gully top 250 x 250 mm Page 64 Gratings for vinyl top Ø222 mm Page 71 ccessories for CO hygienic gully 157 Page 73 ìë

30 ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ± ±² ± Ù«±» Ù«±» [mm] Ø Extended edge 200 x Ø Extended edge with drainage holes 200 x Ø Extended edge 250 x Ø Extended edge with drainage holes 250 x ìê Gratings for gully top 200 x 200 mm Page 61 Gratings for gully top 250 x 250 mm Page 64 ccessories for CO hygienic gully 157 Page 73

ßÝÑ ¹»² ½ ¹«ïëé Î ²¹»½»»» ½± ½ Raising piece telescopic Product information Raising piece can be used for floor structures where multi waterproofing is needed (heat insulation) or where construction

31 ßÝÑ ¹»² ½ ¹«ïëé Î ²¹»½»»» ½± ½ Raising piece telescopic Product information Raising piece can be used for floor structures where multi waterproofing is needed (heat insulation) or where construction height of the slab needs to be increased. Variaty of flanges for membranes vailable in grades (304) or (316L) of stainless steel Order information Ì» ±º º ²¹» Hïèî Hïìî Location flange Híëè Hïìî dhesive bonding flange Híëè Hïìî Mechanical clamping flange ccessories for CO hygienic gully 157 Page 73 ìé

ßÝÑ ¹»² ½ ¹«îïè Ú»¼» ¹ ª» ½ ± Fixed height vertical outlet Product information Fixed height gully can be specified as a point drainage in areas where waterproofing is independent of the gully body.

32 ßÝÑ ¹»² ½ ¹«îïè Ú»¼» ¹ ª» ½ ± Fixed height vertical outlet Product information Fixed height gully can be specified as a point drainage in areas where waterproofing is independent of the gully body. Those gullies can be combined with different grates depending on requested load class. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Tested and certified according to EN 1253 vailable in (304) or (316L) grades of stainless steel Gully top frame size: 300 x 300 mm Outlet diameter DN 100/DN 150 (110 mm or 160 mm OD) Fully removable stainless steel FT Tested and certified according to EN 1253 Fire tested and certified solution available for classes EI 90 EI 180 (EN ) Wide range of gratings to Load Class L 15 M 125 (EN 1253) or C 250 (EN 124) including antislip solution Order information Ì±» Å³³Ã H Å³³Ã Ú±«Í ²¼ ¼»¼¹» Hïïð Hîïè 300 x ìè Gratings for gully top 300 x 300 mm Page 67 ccessories for CO hygienic gully 218 Page 74

33 ßÝÑ ¹»² ½ ¹«îïè Ú»¼» ¹ ª» ½ ± Ì±» Å³³Ã H Å³³Ã Ú±« Hïêð Hîïè 300 x Gratings for gully top 300 x 300 mm Page 67 ccessories for CO hygienic gully 218 Page 74 ìç

34 ßÝÑ ¹»² ½ ¹«îïè Ú»¼» ¹ ± ±² ± Fixed height horizontal outlet Product information Fixed height gully can be specified as a point drainage in areas where waterproofing is independent of the gully body. Those gullies can be combined with different grates depending on requested load class. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Stainless steel construction for durability and long life Wide range of gratings to load class L 15 M 125 (EN 1253) or C 250 (EN 124) vailable in (304) or (316L) grades of stainless steel Gully top frame size: 300 x 300 mm Outlet diameter DN 100 (110 mm OD) Tested and certified according to EN 1253 Wide range of gratings to Load Class L 15 M 125 (EN 1253) or C 250 (EN 124) including antislip solution Order information Ì±» Å³³Ã H Å³³Ã Ú±«Í ²¼ ¼»¼¹» îîí îðð 300 x ëð Gratings for gully top 300 x 300 mm Page 67 ccessories for CO hygienic gully 218 Page 74

ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information Telescopic gully can be combined either with CO gully top or CO channel in most flooring constructions.

35 ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information Telescopic gully can be combined either with CO gully top or CO channel in most flooring constructions. Telescopic solution enables height and rotational adjustment of connected gully top or channel. Gullies are equipped with flanges for connection of waterproof membrane. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Fully removable stainless steel FT Fire tested and certified solution available for classes EI 90 EI 180 (EN ) vailable in (304) or (316L) grades of stainless steel Outlet diameter DN 100/DN 150 (110 mm or 160 mm OD) Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp Telescopic friction ring included Order information Ì» ±º º ²¹» H Å³³Ã Ú±«Hîìð Hïïð Location flange ccessories for CO hygienic gully 218 Page 74 ëï

36 ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ ó ª» ½ ± Ì» ±º º ²¹» H Å³³Ã Ú±«Hìîð Hïïð dhesive bonding flange Hìïè Hïïð Hîïè Mechanical clamping flange ëî ccessories for CO hygienic gully 218 Page 74

37 ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ ó ª» ½ ± Ì» ±º º ²¹» H Å³³Ã Ú±«Hîìð Hïêð Hîïè Location flange Hìîð Hïêð Hîïè dhesive bonding flange Hìïè Hïêð Hîïè Mechanical clamping flange ccessories for CO hygienic gully 218 Page 74 ëí

ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information Telescopic gully can be combined either with gully top or CO channel in most flooring constructions.

38 ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information Telescopic gully can be combined either with gully top or CO channel in most flooring constructions. Telescopic solution enables height and rotational adjustment of connected gully top or channel. Gullies are equipped with flanges for connection of waterproof membrane. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Fully removable stainless steel FT vailable in (304) or (316L) grades of stainless steel Outlet diameter DN 100 (110 mm OD) Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp Tested and certified according to EN 1253 Order information Ì» ±º º ²¹» H Å³³Ã Ú±«Hîìð îïè ïçç Location flange ëì ccessories for CO hygienic gully 218 Page 74

39 ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ ± ±² ± Ì» ±º º ²¹» H Å³³Ã Ú±«Hìîð îïè ïçç dhesive bonding flange Hìîð îïè ïçç Mechanical clamping flange ccessories for CO hygienic gully 218 Page 74 ëë

40 ßÝÑ ¹»² ½ ¹«îïè Ù«±»» ½± ½ Ù«±»» ½± ½ Product information Gully top can be combined with telescopic gully. Different gully top type is available depending on floor structure. Hygienic design following EN 1672 and EN ISO requirements Square gully tops 300 x 300 for load class L15; M 125 or C250 vailable in grades (304) or (316L) of stainless steel Order information Ù«Ì±» Ù«Ì±» H [mm] Ø200 Standard edge 300 x Ø Ø200 Vinyl edge Ø Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. ëê Gratings for gully top 300 x 300 mm Page 67 Gratings for vinyl top Ø222 mm Page 71 ccessories for CO hygienic gully 218 Page 74

41 ßÝÑ ¹»² ½ ¹«îïè Ù«±»» ½± ½ Ù«Ì±» Ù«Ì±» H [mm] Ø Extended edge 300 x Ø Extended edge with drainage holes 300 x Gratings for gully top 300 x 300 mm Page 67 ccessories for CO hygienic gully 218 Page 74 ëé

ßÝÑ ¹»² ½ ¹«îïè Î ²¹»½»»» ½± ½ Raising piece telescopic Product information Raising piece can be used for floor structures where multi waterproofing is needed (heat insulation) or where construction

42 ßÝÑ ¹»² ½ ¹«îïè Î ²¹»½»»» ½± ½ Raising piece telescopic Product information Raising piece can be used for floor structures where multi waterproofing is needed (heat insulation) or where construction height of the slab needs to be increased. Variaty of flanges for membranes vailable in grades (304) or (316L) of stainless steel Order information Ì» ±º º ²¹» Ø Ø200 Location flange Ø420 Ø dhesive bonding flange Ø418 Ø Mechanical clamping flange ëè ccessories for CO hygienic gully 218 Page 74

ÛÙïëð Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information CO gully EG150 can be combined with CO channel with outlet diameter 110 mm. Faul air trap needs to be ordered separately.

43 ÛÙïëð Ì»» ½± ½ ª» ½ ± Telescopic vertical outlet Product information CO gully EG150 can be combined with CO channel with outlet diameter 110 mm. Faul air trap needs to be ordered separately. Stainless steel construction for durability and long life Order information ÚßÌ ïòìíðï ìðëðêê Héï Héë É ±«ÚßÌ ïòììðì ìðîêêí Hïíîôë ïòìíðï ìðèèðë Hïïð É ±«ÚßÌ ïòììðì ìðëíïî Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. ß½½» ±» º± ÛÙïëð Ð ¹» éë ëç

x ÛÙïëð Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information CO gully EG150 can be combined with CO channel with outlet diameter 110 mm. Faul air trap needs to be ordered separately.

44 x ÛÙïëð Ì»» ½± ½ ± ±² ± Telescopic horizontal outlet Product information CO gully EG150 can be combined with CO channel with outlet diameter 110 mm. Faul air trap needs to be ordered separately. Stainless steel construction for durability and long life Order information ÚßÌ Hïíë ïòìíðï ìðêêéé îðð É ±«ÚßÌ ïòììðì ìðëíïï Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. êð ß½½» ±» º± ÛÙïëð Ð ¹» éë

45 Ù ²¹ Ù ²¹ º± ¹«± îðð îðð ³³ Gratings for gully top 200 x 200 mm Product information Variety of grate types is available depending on application and requested load class. For applications with high hygienic demands ladder grate or cast grate should be selected. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Fits to stainless steel gully, fully compliant to EN 1253 vailable in (304) or (316L) grades of stainless steel Gully top frame size: 200 x 200 mm Gratings suitable to load class R50 (5 000 kg) - M125 (EN 1253) or N250 (EN 124) including antislip CO hygien ½ ½ ¹ ²¹ ïêè ïêè Note: Surface electropolished Ô± ¼ ½ Í» ² M 125 Yes CO hygien ½ ¼¼» ¹ ²¹ ïêè ïêè Ô± ¼ ½ Í» ² R 50 M 125 C 250 Note: Surface electropolished Yes Yes No ßÝÑ ¹»² ½ ¹«ïìî ó º»¼» ¹ ßÝÑ ¹»² ½ ¹«ïëé ó º»¼» ¹ Ð ¹» îð Ð ¹» íì Ù«± ó»» ½± ½ Ù«± ó»» ½± ½ Ð ¹» íð Ð ¹» ìë êï

46 ó ¹ ²¹ Ù ²¹ º± ¹«± îðð îðð ³³ CO ³» ¹ ²¹ ïêè ïêè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes No CO quadrato grating ïêè ïêè Ô± ¼ ½ Í» ² L 15 No CO»» º» ¹ ²¹ ïêè ïêè Ô± ¼ ½ Í» ² L 15 No Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. êî ßÝÑ ¹»² ½ ¹«ïìî ó º»¼» ¹ ßÝÑ ¹»² ½ ¹«ïëé ó º»¼» ¹ Ð ¹» îð Ð ¹» íì Ù«± ó»» ½± ½ Ù«± ó»» ½± ½ Ð ¹» íð Ð ¹» ìë

47 ó ¹ ²¹ Ù ²¹ º± ¹«± îðð îðð ³³ CO ³«ó ± ë ¹ ²¹ ïêè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes CO ± ½±ª» ïêè ïêè Ô± ¼ ½ Í» ² M 125 No CO odour proof cover For CO odour proof cover, please contact our Sales/Technical department. CO tundish for gully top Ø Ø Ü» ½ ±² ßÝÑ «²¼ º± ¹«± îðð îðð Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. ßÝÑ ¹»² ½ ¹«ïìî ó º»¼» ¹ ßÝÑ ¹»² ½ ¹«ïëé ó º»¼» ¹ Ð ¹» îð Ð ¹» íì Ù«± ó»» ½± ½ Ù«± ó»» ½± ½ Ð ¹» íð Ð ¹» ìë êí

48 Ù ²¹ Ù ²¹ º± ¹«± îëð îëð ³³ Gratings for gully top 250 x 250 mm Product information Variaty of grate types is available depending on application and requested load class. For applications with high hygienic demands ladder grate or cast grate should be selected. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 Fits to stainless steel gully, fully compliant to EN 1253 vailable in (304) or (316L) grades of stainless steel Gully top frame size: 250 x 250 mm Gratings suitable to load class R50 (5 000 kg) - M125 (EN 1253) or N250 (EN 124) including antislip CO hygien ½ ½ ¹ ²¹ îïè îïè Note: Surface electropolished Ô± ¼ ½ Í» ² M 125 Yes CO hygien ½ ¼¼» ¹ ²¹ îïè Ô± ¼ ½ Í» ² R 50 M 125 C 250 Note: Surface electropolished Yes Yes No Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. êì ßÝÑ ¹»² ½ ¹«ïëé ó º»¼» ¹ Ð ¹» íì Ù«± ó»» ½± ½ Ð ¹» ìë

49 Ù ²¹ Ù ²¹ º± ¹«± îëð îëð ³³ CO mesh grating îïè îïè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes No CO quadrato grating îïè îïè Ô± ¼ ½ Í» ² L 15 No CO heelsafe grating îïè îïè Ô± ¼ ½ Í» ² L 15 No Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. ßÝÑ ¹»² ½ ¹«ïëé ó º»¼» ¹ Ð ¹» íì Ù«± ó»» ½± ½ Ð ¹» ìë êë

Ù ²¹ Ù ²¹ º± ¹«± îëð îëð ³³ CO multi-slot 5 grating îïè îïè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes 1.4301 408033 1.4404 408133 CO slot cover îïè îïè Ô± ¼ ½ Í» ² M 125 No 1.4301 408030 1.

50 Ù ²¹ Ù ²¹ º± ¹«± îëð îëð ³³ CO multi-slot 5 grating îïè îïè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes CO slot cover îïè îïè Ô± ¼ ½ Í» ² M 125 No CO odour proof cover For CO odour proof cover, please contact our Sales/Technical department. CO tundish for gully top Ø Ø Ü» ½ ±² ßÝÑ «²¼ º± ¹«± îëð îëð Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. êê ßÝÑ ¹»² ½ ¹«ïëé ó º»¼» ¹ Ð ¹» íì Ù«± ó»» ½± ½ Ð ¹» ìë

51 Ù ²¹ Ù ²¹ º± ¹«± íðð íðð ³³ Gratings for gully top 300 x 300 mm Product information Variety of grate types is available depending on application and requested load class. For applications with high hygienic demands ladder grate or cast grate should be selected. Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 ntislip solution available Fits to stainless steel gully, fully compliant to EN 1253 vailable in (304) or (316L) grades of stainless steel Gully top frame size: 300 x 300 mm Gratings suitable to load class L15, R50 (5 000 kg), M125 (EN 1253) or N250 (EN 124) including antislip ßÝÑ ygien ½ ½ ¹ ²¹ îêè îêè Note: Surface electropolished Ô± ¼ ½ Í» ² M 125 Yes ßÝÑ ygien ½ ¼¼» ¹ ²¹ îêè îêè Ô± ¼ ½ Í» ² R 50 M 125 C 250 Note: Surface electropolished Yes Yes No ßÝÑ ¹»² ½ ¹«îïè ó º»¼» ¹ Ð ¹» ìè Ù«± ó»» ½± ½ Ð ¹» ëê êé

52 Ù ²¹ Ù ²¹ º± ¹«± íðð íðð ³³ CO m» ¹ ²¹ îêè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes No CO q«¼ ± ¹ ²¹ îêè îêè Ô± ¼ ½ Í» ² L 15 No CO h»» º» ¹ ²¹ îêè îêè Ô± ¼ ½ Í» ² L 15 No Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. êè ßÝÑ ¹»² ½ ¹«îïè ó º»¼» ¹ Ð ¹» ìè Ù«± ó»» ½± ½ Ð ¹» ëê

Ù ²¹ Ù ²¹ º± ¹«± íðð íðð ³³ CO m«ó ± ë ¹ ²¹ îêè îêè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes 1.4301 408042 1.4404 408142 CO s ± ½±ª» îêè îêè Ô± ¼ ½ Í» ² M 125 No 1.4301 408039 1.

53 Ù ²¹ Ù ²¹ º± ¹«± íðð íðð ³³ CO m«ó ± ë ¹ ²¹ îêè îêè Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes CO s ± ½±ª» îêè îêè Ô± ¼ ½ Í» ² M 125 No CO odour proof cover For CO odour proof cover, please contact our Sales/Technical department. ßÝÑ «²¼ º± ¹«± Ø Ø Ü» ½ ±² ßÝÑ «²¼ º± ¹«± íðð íðð Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. ßÝÑ ¹»² ½ ¹«îïè ó º»¼» ¹ Ð ¹» ìè Ù«± ó»» ½± ½ Ð ¹» ëê êç

54 Ù ²¹ Ù ²¹ º± ª ² ± Hïéð Ù ²¹ º± ª ² ± Øïéð Product information Variety of grate types is available depending on application and requested load class. For applications with high hygienic demands ladder grate or cast grate should be selected. Hygienic design Stainless steel construction for durability and long life Fits to stainless steel gully, fully compliant to EN 1253 vailable in (304) or (316L) grades of stainless steel For load class L 15 Tested and certified according to EN 1253 CO ¼¼» ¹ ²¹ Hïéð Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes CO» º±»¼ ¹ ²¹ Hïéð Ô± ¼ ½ Í» ² L 15 No Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. CO odour proof cover For CO odour proof cover, please contact our Sales/Technical department. éð Ù«± Ð ¹» ìë

55 Ù ²¹ Ù ²¹ º± ª ² ± Hîîî Ù ²¹ º± ª ² ± Øîîî Product information Variety of grate types is available depending on application and requested load class. For applications with high hygienic demands ladder grate or cast grate should be selected. Hygienic design Stainless steel construction for durability and long life Fits to stainless steel gully, fully compliant to EN 1253 vailable in (304) or (316L) grades of stainless steel For load class L 15 Tested and certified according to EN 1253 ßÝÑ ¼¼» ¹ ²¹ Ô± ¼ ½ Í» ² L 15 Note: Surface electropolished Yes ßÝÑ» º±»¼ ¹ ²¹ Hîîî Ô± ¼ ½ Í» ² L 15 No Hygienic design following EN 1672, EN ISO and EHEDG document No. 8, 13 and 44 not applied. CO odour proof cover For CO odour proof cover, please contact our Sales/Technical department. Ù«± Ð ¹» ëê éï

56 ß½½» ±» ß½½» ±» º± ßÝÑ ¹»² ½ ¹«ïìî ccessories for CO hygienic gully 142 Ü» ½ ±² Ë»¼ Hïìî Í ¾ µ» Í ²»»» ðôì» ½ ½ ßÝÑ ¹»² ½ ¹«ïìî ó Ì»» ½± ½ Ê» ½ ± ± ±² ïòìíðï ïòììðì ìïêçðð ìïêçðï îë Hïìî Í ¾ µ» Í ²»»» ðôí» ½ ½ ßÝÑ ¹»² ½ ¹«ïìî ó Ú»¼» ¹ Ê» ½ ± ± ±² ïòìíðï ïòììðì ìïêçðî ìïêçðí éì Hïðð Ø ¹»² ½ º±«Í ²»»» É»» ëð ³³ ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ Ì»» ½± ½ ïòìíðï ïòììðì ìïìéìï ìïìèìï îë Hïêì Ú ½ ±² ²¹ ÒÞÎ øß½ ²»ó¾«¼»²» ßÝÑ ¹»² ½ ¹«ïìî Ì»» ½± ½ NBR ìïìéìî îç Hïìî Í ²¼ ¼ º±««± ÒÞÎ øß½ ²»ó¾«¼»²» ßÝÑ ¹»² ½ ¹«ïìî Ú»¼» ¹ Ì»» ½± ½ NBR ìïìéìí Hïìî îêôë ïëð éè Hïðð Hïçè ßÝÑ º»» ² µ º± ¹«ïìîñÜéë Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ßÝÑ»» ² µ º± ¹«ïìîñÜÒ ïðð Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ßÝÑ ¹»² ½ ¹«ïìî Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ßÝÑ ¹»² ½ ¹«ïìî Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ìïêçíð ìïêçíï éî ßÝÑ ¹»² ½ ¹«ïìî Ð ¹» îð

57 ß½½» ±» ß½½» ±» º± ßÝÑ ¹»² ½ ¹«ïëé ccessories for CO hygienic gully 157 Ü» ½ ±² Ë»¼ Hïëç ïòìíðï ìïêçðì ëð Í ¾ µ» Í ²»»» ðôê» ½ ½ ßÝÑ ¹»² ½ ¹«ïëé ó Ê» ½ Ú»¼» ¹ ± Ì»» ½± ½ ïòììðì ìïêçðë îê Hïëç Í ¾ µ» Í ²»»» ðôí» ½ ½ ßÝÑ ¹»² ½ ¹«ïëé ó Ø± ±² Ú»¼» ¹ ± Ì»» ½± ½ ïòìíðï ïòììðì ìïêçðê ìïêçðé ïðë Hïîé Ø ¹»² ½ º±«Í ²»»» É»» ëð ³³ ßÝÑ ¹»² ½ ¹«ïëé Ì»» ½± ½ ïòìíðï ïòììðì ìðèîðð ìðèîïð îì Hïèì Ú ½ ±² ²¹ ÒÞÎ øß½ ²»ó¾«¼»²» ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ Ì»» ½± ½ NBR ìðèîðë îï Hïëê Í ²¼ ¼ º±««± ÒÞÎ øß½ ²»ó¾«¼»²» ßÝÑ ¹»² ½ ¹«ïëé Ú»¼» ¹ Ì»» ½± ½ NBR ìðèîðï Hïëê îïôë ïïï Hïîé ßÝÑ º»» ² µ º± ¹«ïëéñÜéë Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ßÝÑ ¹»² ½ ¹«ïëé Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ìïêçíî Hîîí îïð ßÝÑ»» ² µ º± ¹«ïëéñÜÒ ïðð Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ßÝÑ ¹»² ½ ¹«ïëé Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ìïêçíí ßÝÑ ¹»² ½ ¹«ïëé Ð ¹» íì éí

58 ß½½» ±» ß½½» ±» º± ßÝÑ ¹»² ½ ¹«îïè ccessories for CO hygienic gully 218 Ü» ½ ±² Ë»¼ Hîîî ïòìíðï ìïêçðè ëð Í ¾ µ» Í ²»»» ïôì» ½ ½ ßÝÑ ¹»² ½ ¹«îïè ó Ê» ½ Ú»¼» ¹ ± Ì»» ½± ½ ïòììðì ìïêçðç îê Hîîî Í ¾ µ» Í ²»»» ðôé» ½ ½ ßÝÑ ¹»² ½ ¹«îïè ó Ø± ±² Ú»¼» ¹ ± Ì»» ½± ½ ïòìíðï ïòììðì ìïêçïð ìïêçïï çê Hïèî Ø ¹»² ½ º±«Í ²»»» É»» ëð ³³ ßÝÑ ¹»² ½ ¹«îïè Ú»¼» ¹ Ì»» ½± ½ ïòìíðï ïòììðì ìðèîîð ìðèîíð îì Hîìí Ú ½ ±² ²¹ ÒÞÎ øß½ ²»ó¾«¼»²» ßÝÑ ¹»² ½ ¹«îïè Ì»» ½± ½ NBR ìðèîîë îï Hîïé Í ²¼ ¼ º±««± ÒÞÎ øß½ ²»ó¾«¼»²» ßÝÑ ¹»² ½ ¹«îïè Ú»¼» ¹ Ì»» ½± ½ NBR ìðèîîï Hîïè îî çç Hïèî ßÝÑ º»» ² µ º± ¹«îïèñÜïïð Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ßÝÑ ¹»² ½ ¹«îïè Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ìïêçíì Hîçè îïð ßÝÑ º»» ² µ º± ¹«îïèñÜÒïêð Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ßÝÑ ¹»² ½ ¹«îïè Ú»¼ Ø» ¹ ô ª» ½ Ì»» ½± ½ô ª» ½ ìïêçíë éì ßÝÑ ¹»² ½ ¹«îïè Ð ¹» ìè

59 ß½½» ±» ß½½» ±» º± ÛÙïëð ²¼ ßÝÑ «²¼ ± ¾» ccessories for CO gully EG150 Ü» ½ ±² Ë»¼ Hïðë Í»ª» øº± ± ïïð ³³ Í ²»»» ßÝÑ ± ½ ²²» îð ßÝÑ ³±¼«¾± ½ ²²» ïîë ßÝÑ ³±¼«¾± ½ ²²» îðð ßÝÑ ³±¼«± ½ ²²» îð ïòìíðï ïòììðì çéîíë çéîèë èë Hïðè Ú±«Í ²»»» É»» ëð ³³ ßÝÑ ± ½ ²²» îð ßÝÑ ³±¼«¾± ½ ²²» ïîë ßÝÑ ³±¼«¾± ½ ²²» îðð ßÝÑ ³±¼«± ½ ²²» îð ïòìíðï ïòììðì çéîïé çéîêé èêoî Hïðîõî Hèè Í ¾ µ» Í ²»»» ßÝÑ ± ½ ²²» îð ßÝÑ ³±¼«¾± ½ ²²» ïîë ßÝÑ ³±¼«¾± ½ ²²» îðð ßÝÑ ³±¼«± ½ ²²» îð Ü±² ½±³¾ ²» ÚßÌ Í«¾» ÐóÌ øßýñ» ½» ïòìíðï ïòììðì ìðçïèç ìðçïçð CO tundish portable Ü» ½ ±² Ø ßÝÑ «²¼ ± ¾» Í ²»»» ïòìíðï ìïëèîï Ø100 Ø300 ÛÙïëð Ð ¹» ëç éë

60 Ú ±» ²¼ Ý±² «½ ±²» ¹ Ú ±» ²¼ Ý±² «½ ±²» ¹ Flow rates and Construction heights CO hygienic gully 142 fixed height Ø142 HÜ éë ïïð ± ±² Ê» ½ Ú ±» Å ñ Ã ß ã ïíë Å³³Ã ïòì ïòê HÜ éë ïïð ± ±² Ø± ±² Ú ±» Å ñ Ã ß ã ïíë Å³³Ã ïòì ïòê CO hygienic gully 142 telescopic Ø142 Ø142 Ø142 Ø142 Ø142 ± ±² Ú ±» Å ñ Ã HÜ ß ã ëî Å³³Ã ß ã èî Å³³Ã ß ã çé Å³³Ã ß ã ïîé Å³³Ã ß ã ïëé Å³³Ã éë ïòì ïòê ïòê ïòé ïòè Ê» ½ ïïð ïòê ïòè ïòè ïòç îòð ± ±² Ú ±» Å ñ Ã HÜ ß ã ëî Å³³Ã ß ã èî Å³³Ã ß ã çé Å³³Ã ß ã ïîé Å³³Ã ß ã ïëé Å³³Ã éë ïòì ïòê ïòê ïòé ïòè Ø± ±² ïïð ïòê ïòè ïòè ïòç îòð éê

61 Ú ±» ²¼ Ý±² «½ ±²» ¹ Ú ±» ²¼ Ý±² «½ ±²» ¹ CO hygienic gully 157 fixed height Ø157 HÜ éë ïïð ± ±² Ê» ½ Ú ±» Å ñ Ã ß ã ïçí Å³³Ã îòé íòë HÜ éë ïïð ± ±² Ø± ±² Ú ±» Å ñ Ã ß ã ïéð Å³³Ã îòê îòè CO hygienic gully 157 telescopic Ø157 Ø157 Ø157 Ø157 Ø157 ± ±² Ú ±» Å ñ Ã HÜ ß ã êë Å³³Ã ß ã çï Å³³Ã ß ã ïîë Å³³Ã ß ã ïëí Å³³Ã ß ã ïèð Å³³Ã éë îòé íòð íòð íòï íòí Ê» ½ ïïð íòë ìòð ìòï ìòî ìòì ± ±² Ú ±» Å ñ Ã HÜ ß ã ëî Å³³Ã ß ã èî Å³³Ã ß ã çé Å³³Ã ß ã ïîé Å³³Ã ß ã ïëé Å³³Ã éë îòê îòç íòð íòï íòí Ø± ±² ïïð îòè íòí íòê ìòð ìòì éé

62 Ú ±» ²¼ Ý±² «½ ±²» ¹ Ú ±» ²¼ Ý±² «½ ±²» ¹ Flow rates and Construction heights CO hygienic gully 218 fixed height Ø218 HÜ ïïð ïêð ± ±² Ê» ½ Ú ±» Å ñ Ã ß ã îðð Å³³Ã ëòð ëòð HÜ ± ±² Ú ±» Å ñ Ã ß ã ïéé Å³³Ã ïïð Ø± ±² ìòì CO hygienic gully 218 telescopic Ø218 Ø218 Ø218 Ø218 Ø218 ± ±² Ú ±» Å ñ Ã HÜ ß ã êë Å³³Ã ß ã çï Å³³Ã ß ã ïîë Å³³Ã ß ã ïëí Å³³Ã ß ã ïèð Å³³Ã ïïð ëòð ëòë ëòê ëòè êòî Ê» ½ ïêð ëòð ëòë ëòê ëòè êòî ± ±² Ú ±» Å ñ Ã HÜ ß ã éî Å³³Ã ß ã çè Å³³Ã ß ã ïíî Å³³Ã ß ã ïëê Å³³Ã ß ã ïèé Å³³Ã ïïð Ø± ±² ìòì ìòê ìòè ìòç ëòì éè

63 Ú ±» ²¼ Ý±² «½ ±²» ¹ Ú ±» ²¼ Ý±² «½ ±²» ¹ éç

General introduction. System introduction 5 ACO slot channel 6 ACO box channel 7

General introduction. System introduction 5 ACO slot channel 6 ACO box channel 7 CO gully Content General introduction page Introduction 3 Why stainless steel? 3 Why CO slot and box channel 3 Surface treatment of stainless steel 3 Finishes used by CO 3 Hygienic standards 4 Slip resistance