Industrial Hygiene 101: Understand the Fundamentals and Improve Your EHS Program
|
|
- Nora Hoover
- 6 years ago
- Views:
Transcription
1 Industrial Hygiene 101: Understand the Fundamentals and Improve Your EHS Program Presented by: Kevin Slates Ed.D., MPA, BS, CSP Indiana University Monday, May 13, :30 p.m. to 3:00 p.m. Eastern 12:30 p.m. to 2:00 p.m. Central 11:30 a.m. to 1:00 p.m. Mountain 10:30 a.m. to 12:00 p.m. Pacific or For CD and other purchasing information, contact customer service at: or BLR and HR Hero Business & Legal Resources and HR Hero. All rights reserved. These materials may not be reproduced in part or in whole by any process without written permission. This webinar qualifies for Continuance of Certification (COC) credit. CSPs will earn COC points for attending this webinar.
2 Industrial Hygiene 101: Understand the Fundamentals and Improve Your EHS Program Presented by: Kevin Slates Ed.D., MPA, BS, CSP May 13, 2013 INTRODUCTIONS Kevin Slates, Ed.D., MPA, BS, CSP Indiana University Clinical Assistant Professor Kentucky Occupational Health Program
3 Which Industry Do You Work In? Manufacturing Transportation Warehouse and distribution Education Government Oil and gas Healthcare Loss control Biotech Chemical processing Does Your Job Function Involve Industrial Hygiene, Safety or Environmental? Technician Specialist Supervisor Consultant Manager Director Corporate Development, implementation, evaluation or policies, and programs Determine effectiveness
4 Learning Objectives 1. Describe ways to improve your EHS system 2. Identify major government agencies, regulations related to industrial hygiene 3. Discuss major occupational exposure limits 4. Identify methods to assess health related hazards 5. Describe methods and strategies to control industrial hygiene related hazards The Industrial Hygienist is concerned with the identification, evaluation, and control of environmental workplace stressors such as physical, chemical and biological hazards. Industrial hygiene is both an art and science
5 How Many Work Related Deaths Occurred in the U.S. (2012) A. 10,000 B. 3,000 C. 4,600 D. 1,500 Source: BLS How Many Occupational Health related Deaths Occurred in the 2012? A. 3,000 B. 10,000 C. 7,000 D. 50,000 Under reporting Source: CDC
6 Integrate Industrial Hygiene Into Your EHS System Engineering Quality Data management Product life cycle Training Compliance Hazard tracking system Management commitment Hazard Assessment Techniques Job Hazard Analysis JHA Fault Tree Analysis FTA Energy trace barrier analysis ETBA Preliminary Hazard Assessment PHA Management Oversight Risk Tree MORT Failure Mode Effect Analysis FMEA
7 Accident Causation Operational Behavioral Cultural Product or Process Life Cycle (Slates, 2011). Concepts design Wear out Operational
8 Closed Loop Hazard Tracking System (Slates, 2011) Hazard Identification Communicate to Employees Hazard Control Reevaluate Control Effectiveness Regulatory Agencies & Organizations 1. OSHA Act American Conference of governmental Industrial Hygienists OSHA promulgates and enforces regulations 4. NIOSH conducts research 5. OSHRC adjudicate and interprets regulations 6. General Duty Clause 5 (a) 1.
9 Many OSHA standards were adopted from National Consensus Standards ANSI ACGIH NFPA Occupational Exposure limits OSHA permissible exposure limits PELs were adopted from ACGIH 1968 TLVs ACGIH TVLs and OSHA PELs are based on 8 hr day 40 hour week Short term exposure 15 minutes Ceiling level instantaneous exposure measurement
10 Air Contaminates & Toxic Substances 29 CFR Asbestos Lead Benzene Carbon monoxide Cadmium Hexavalent chrome Acetone Formaldehyde 8 TWA Calculation Two hours exposure at 150 ppm Two hours exposure at 75 ppm Four hours exposure at 50 ppm Substituting this information in the formula, we have ( ) 8 = ppm Since ppm is less than 100 ppm, the 8-hour time weighted average limit, the exposure is acceptable.
11 Exposure Limits Considerations Are OSHA exposure limits updated annually? Will OSHA exposure limits protect 100% of the working population exposed? ACGIH TLVs are updated annually Exposure limits do not take into account the synergetic effects of the exposure to multiple chemicals Understanding human health Why is it important to have a basic understanding of the various components of the human anatomy? Usually the industrial hygienist is concerned with the evaluation of the problem from the heath perspective.
12 Health Related Standards Noise and hearing conservation Process safety management Bloodborne pathogens Respiratory protection Laboratory safety Indoor air quality Personal protective equipment Ergonomics Confined space Flammable and combustible substances Types of Air Contaminates Fume Mists Vapor Dust Smoke gases
13 Routes of entry What are the 3 major routes of employee exposure? 1. Inhalation 2. Absorption 3. Ingestion Globally Harmonized System Revision of the current hazard communication standard 29 CFR Should improve comprehensibility and facilitate compliance
14 Major Change in Approach Labeling provisions are the biggest difference between HCS and GHS Specific approach will require all labels to be modified to comply GHS Workshop, 10/20/2006 Safety Data Sheets HCS allows any order of information Consistent with industry approaches in ANSI and ISO Should improve comprehensibility and help with issues regarding accuracy of the information GHS Workshop, 10/20/2006
15 Hazard Warning Labels: HMIS & NFPA Dose Response Curve
16 Health Effects 1. Acute 2. Sub chronic 3. Chronic Organs 1. The respiratory system 2. The skin 3. The ear Inhalation Health Hazards Welding fumes Asbestosis Biological Benzene Coal dust solvent vapors Formaldehyde Carbon monoxide Lead Arsenic Lung disease Silicosis Asbestosis Metal fume fever Bronchitis Asthma Emphysema Cancer
17 Major section of the Lungs 1. Nasal pharyngeal 2. Bronchial 3. Pulmonary alveoli The Ear Decibel 90 dba PEL 85 dba Action level
18 Noise Evaluation Methods 1. Sound level meter 2. Dosimeter 3. Octave band analyzer Understanding radiation Radiation is a form of energy All forms of radiation exist as a phenomenon known as electromagnetic spectrum Please note that the shorter the wavelength the more ionizing the radiation becomes
19 Radiation Radiation is a means of propagating energy. Type types Ionizing radiation > 10 electron volts Non ionization radiation Lasers Alpha Beta X rays Control Distance Shielding Radio active decay (time)
20 Bloodborne pathogens standard Engineering controls 2. Work practices controls 3. PPE 4. Labeling requirements 5. Employee training and education 6. Needle stick prevention PPE General Requirements Personal protective equipment PPE hazard assessment Eyes Face Hand PPE certification
21 What is Meant by the Term Permeation Rate? Permeation rate is the rate at which the chemical will move through the material As a rule of thumb, the denser the materials the lower the dexterity. 15% of the population is allergic to latex
22 Lab Hazards Flammable and combustibles Toxic and hazardous substances Heavy metals VOCs Fire prevention Explosions Spill prevention Fume hood capture velocities Emergency action plan Chemical storage PPE Compressed gas cylinders Chemical Hygiene Plan More than 500,000 workers are employed in laboratories in the U.S. The laboratory environment can be a hazardous place to work. Laboratory workers are exposed to numerous potential hazards including chemical, biological, physical and radioactive hazards, as well as musculoskeletal stresses.
23 Personal Air Monitoring Carcinogens Mutagens Teratogens Chemical standards Do Quality Control Labs Have to Comply with the CHP? Laboratories that conduct research and development and related analytical work are subject to the requirements of the Laboratory Standard
24 What is a Laboratory Laboratory means a facility where the "laboratory use of hazardous chemicals" occurs. It is a workplace where relatively small quantities of hazardous chemicals are used on a nonproduction basis What is a CHP The CHP is a written program stating the policies, procedures and responsibilities that protect workers from the health hazards associated with the hazardous chemicals used in that particular workplace
25 How often should employers review and evaluate the effectiveness of the CHP? Written Policies and Procedures 1. Use of containment devices such as fume hoods. 2. Procedures for removal of contaminated waste. 3. Decontamination procedures. 4. Spill prevention procedures
26 Who Often Should Showers be Tested? Although the term "routine" does not indicate a specific frequency, it does mean that the inspections should be performed at regular intervals which are determined by someone familiar with the equipment and the work environment. Respiratory protection Types of respirators air purifying and air supplying Major elements of a respiratory program Program administrator Initial monitoring Medical evaluation Respiratory selection Fit testing Care, maintenance and use Training Program evaluation
27 Fume Hood Safety A laboratory fume hood is a three-sided enclosure with an adjustable front opening. It is designed to capture, contain, and exhaust hazardous fumes generated inside its enclosure. ANSI NFPA ACGIH ASHRAE
28 Fume Hood Requirements A laboratory fume hood is a three-sided enclosure with an adjustable front opening. Inspection Filters, negative pressure ASHRAE ANSI Z Sect 5 It is designed to capture, contain, and Air velocity at the hood exhaust hazardous face must average fumes generated inside 120 linear feet per minute its enclosure. Sampling Methodology Chemical exposure limits Chemical or substance health effects Analytical methods OSHA and NIOSH sampling methodologies Media Air sampling equipment Flow rates and volumes
29 Air Sampling and Monitoring 3 Types of Sampling 1. Short term: hand held sampling pumps, direct reading instruments, and colorimetric tubes 2. Long term: personal sampling pumps, long term, tubes and filters 3. Passive samplers: indicator badges
30 Short Term Sampling Used to establish a short term or snap shot assessment of the level of air contamination at the time the sample was taken. Measures contamination levels only at the time and location they were taken and do no provide a comprehensive analysis of the true exposure risk for the overall environment. Long Term Sampling Continuous long term sampling can be conducted using portable battery operated sampling pumps. Sampling pumps draw air thru sampling media at a continuous rate for a set period of time that may be eight hours or more.
31 Long Term Sampling Once the sampling is complete the collected sample can be examined under laboratory conditions. The laboratory will analyze the trapped material on the media and determine concentration and employee exposure can be calculated based on an 8 hour work shift. Passive Sampling 3. Passive samplers: indicator badges are worn by employees in the work area. These badges, known as passive samplers, either change color on exposure to a particular substance or can be subsequently analyzed in a laboratory. Accuracy + 25% Diffusion
32 Challenges & Recommendations What role does organizational safety culture play Nano technology Research funding sources Accountability Written protocols Document and conduct formal training Document and communicate near misses Do not relay on chemical manufactures recommendations. Make site specific requirements for the use of chemicals Thank You! Thank you for participating in the Understanding Industrial Hygiene 101 Webinar. Contact: Kevin Slates, Ed.D., CSP Assistant Professor (812)
33 References Requited text: Vincoli, W. Jeffery, Basic Guide to Industrial Hygiene, John Willey & Sons, Inc.: Toronto, IU industrial hygiene laboratory. Retrieved June 26, retrieved May Chemical Safety Board case study video retrieved June 12, Questions
34 Disclaimers *This webinar is designed to provide accurate and authoritative information about the subject matter covered. It is sold with the understanding that the publisher is not engaged in rendering legal, accounting, or other professional services. *This webinar provides general information only and does not constitute legal advice. No attorney-client relationship has been created. If legal advice or other expert assistance is required, the services of a competent professional should be sought. We recommend that you consult with qualified local counsel familiar with your specific situation before taking any action.
35 Speaker Biography Kevin Slates Kevin Slates, Ed.D., MPA, BS, CSP is a Clinical Assistant Professor in the department of Applied Health Science at Indiana University. He is also Director of the Industrial hygiene lab at the university. He teaches graduate and undergraduate courses safety, industrial hygiene and environmental health. His research interests include program evaluation, EHS management systems, safety culture, health disparities and exposure assessment. Slates experience includes working for the Kentucky Occupational Safety Health Program and the Environmental Public Protection Cabinet as a manager, consultant and inspector. His dissertation examined safety performance metrics and government VPP partnership programs. Slates holds a B.S. in Biology and Chemistry from Eastern Kentucky University, a M.P.A, in Public Administration from Kentucky State University and Doctorate in Education from Spalding University. He is a Certified Safety Professional and authorized OSHA outreach general industry and construction trainer. He is also an active member of AIHA and ASSE.
VP, Facilities and Construction Management
Title: Effective Date: November 2005 Revision Date: February 13, 2017 Issuing Authority: Responsible Officer: VP, Facilities and Construction Management Director Environmental Health and Safety PURPOSE
More informationAchieving Regulatory Chemical Compliance: Strategies & Approaches that Reduce Risk & Lower Costs
Achieving Regulatory Chemical Compliance: Strategies & Approaches that Reduce Risk & Lower Costs Presented by: Laura Casey Anne Sefried Sponsored By: Wednesday, August 18, 2013 2:00 p.m. to 3:00 p.m. Eastern
More informationApplied Environmental and Industrial Hygiene. Instructor: Required Text: The Occupational Environment Its Evaluation and Control
Applied Environmental and Industrial Hygiene Instructor: Marco Pedone, DrPH,, CIH, CSP, CHMM, CET 1 Required Text: The Occupational Environment Its Evaluation and Control Edited by Salvatore DiNardi Also
More informationRequired Courses $800/$720*
1 Safety and Health Specialist (SHS) Construction Concentration Participants must complete a minimum of five (5) required and four (4) elective courses that include a minimum of 135 contact hours of training
More informationMeet today s webinar team
Meet today s webinar team Presenter: Al Capps Al is a professional engineer with over 5 years experience in workplace safety. He holds a bachelor s in chemical engineering from The University of Texas.
More informationWelding Safety & Health. Understanding Weld Fume
Welding Safety & Health Understanding Weld Fume Disclaimer Every welding environment is unique with physical and health concerns and needs to be evaluated by a qualified Safety Professional or Certified
More informationCourse Objectives. INDUSTRIAL HYGIENE A Vital Component In Manufacturing Safety 3/24/14. This training course will cover
INDUSTRIAL HYGIENE A Vital Component In Manufacturing Safety Course Objectives This training course will cover Industrial Hygiene What is industrial hygiene? Scope of industrial hygiene How does industrial
More informationMaster Distributors Of Quality Products For The Air Conditioning, Heating, Refrigeration & Plumbing Industries
Bramec Corporation l PO Box 9 l North Sioux City, SD 57049 l Phone: 605-232-4311 l Fax: 605-232-4590 l www.bramec.com Master Distributors Of Quality Products For The Air Conditioning, Heating, Refrigeration
More informationAppendix C. Yes obtain containment compatible with chemical
Appendix C Chemical Hazard Assessment Form Complete and attach a Chemical Hazard Assessment form for EACH hazardous chemical listed in the SOP. Chemical/ Reagent: Formaldehyde solutions/ Formalin CAS#:
More informationBasic Characterization and Information Gathering
Basic Characterization and Information Gathering Walkthrough Survey The basic characterization builds on the walkthrough survey which industrial hygienists have practiced for many years. To assess exposures
More informationCourse Learning Outcomes for Unit VII. Reading Assignment. Unit Lesson. UNIT VII STUDY GUIDE Subpart Z: Toxic and Hazardous Substances
UNIT VII STUDY GUIDE Subpart Z: Toxic and Hazardous Substances Course Learning Outcomes for Unit VII Upon completion of this unit, students should be able to: 1. Apply OSHA safety and health standards
More informationGlossary. CARCINOGEN - A substance or physical agent that may cause cancer in animals or humans.
Glossary ACGIH - The American Conference of Governmental Industrial Hygienists is a voluntary membership organization of professional industrial hygiene personnel in governmental or educational institutions.
More informationMASSACHUSETTS STATUTES : (2) GENERAL LAWS OF MASSACHUSETTS
MASSACHUSETTS STATUTES : (2) GENERAL LAWS OF MASSACHUSETTS PART I: ADMINISTRATION OF THE GOVERNMENT TITLE II: EXECUTIVE AND ADMINISTRATIVE OFFICERS OF THE COMMONWEALTH CHAPTER 21I: MASSACHUSETTS TOXICS
More informationINDEX. Laboratory Safety Guide
INDEX A accident reporting, 1, 70, 125 acids, 154 neutralization, 164-168 strength table, 165 acrylamide, 154 acute toxicity, 31, 313, 314 acute toxicity classes, 32 administrative controls (fume hoods),
More informationCourse Overview. This course: Estimated Length: 30 minutes Audience: Managers, supervisors, workers.
Course Overview Occupational Health/Environmental Controls Course Description Review OSHA Regulations, Subpart D (Construction): Covers requirements for medical services and first aid, sanitation, occupational
More informationIndustrial Hygiene for the Telecommunications Professional. John Malone, CSP, CIH Senior Safety Manager
Industrial Hygiene for the Telecommunications Professional John Malone, CSP, CIH Senior Safety Manager Objective Provide information that will enable you to decide how to proceed with Industrial Hygiene
More informationRevision Number: Issue date: 09/12/ PRODUCT AND COMPANY IDENTIFICATION. IDH number: Telephone: Emergency Telephone:
Safety Data Sheet Revision Number: 006.0 Issue date: 09/12/2017 1. PRODUCT AND COMPANY IDENTIFICATION Product name: LOCTITE SI 5699 known as 5699(TM) Grey High Performance Product type: Silicone Restriction
More informationVersion 4.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012
SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 69 55 COMPANY : Euclid Chemical Company 19218 Redwood Road Cleveland, OH 44110 Telephone : 1-800-321-7628 Emergency Phone: : U.S. only: 1-800-424-9300
More informationCHEMICAL HYGIENE PLAN FOR CLEMSON UNIVERSITY LABORATORIES. Prepared by: Naomi Kelly Chemical Hygiene Officer
CHEMICAL HYGIENE PLAN FOR CLEMSON UNIVERSITY LABORATORIES 2016 Prepared by: Naomi Kelly Chemical Hygiene Officer THE OSHA LABORATORY STANDARD The basis for this standard (29 CFR 1910.1450) is a determination
More informationProduct Description. Hazard Identification. First Aid Measures. Firefighting Procedures. Spill or Leak Procedures. Handling and Storage
(84μS) Safety Datasheet Section 1 Product Name Recommended Use Synonyms Distributor Chemical Information Chemtrec Section 2 Product Description Conductivity Calibration Solution 84μS Equipment Calibration
More informationSafety Data Sheet. ! 1107 Hazeltine Blvd,! Phone:! 952/ ! Suite 535 MD 27,! Toll Free:! 800/ Fire
Safety Data Sheet Section 1: Chemical Product and Company Information Product name: Gilsonite Supplier/ Further Information: Martrex, Inc. Web: www.martrexinc.com! 1107 Hazeltine Blvd,! Phone:! 952/933-5000!
More informationSECTION 1: PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200 AND SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499. STANDARD SHOULD BE
More informationApplication 36.1 This Part applies to every workplace in which a chemical or biological substance is present.
PART 36 CHEMICAL AND BIOLOGICAL SUBSTANCES APPLICATION Application 36.1 This Part applies to every workplace in which a chemical or biological substance is present. ASSESSMENTS Duty to assess chemical
More informationCrystalline Silica: OSHA s Proposed Rulemaking Tina M. Stanczewski, Esq., MSP Law Office of Adele L. Abrams P.C.
Crystalline Silica: OSHA s Proposed Rulemaking Tina M. Stanczewski, Esq., MSP Law Office of Adele L. Abrams P.C. www.safety-law.com 301-595-3520 Topics Regulatory Overview Proposed Rule Related Measures
More informationSilica Silica, Crystalline (Respirable Size), National Institute of Health
Great Western Painting Silica Silica, Crystalline (Respirable Size), National Institute of Health Silica Occupational silica exposure is completely preventable through employee training, use of a silica
More informationSafety Data Sheet SDS No. GB-1205
Section 1: Product and Company Identification Product Name Product Identifiers Proform Other means of identification Drywall tape Recommended Use A combination of paper joint tape with laminated metal
More informationLEHDER Environmental Services Limited has attempted to obtain an updated MSDS. No update is available for the reason identified below:
LEHDER Environmental Services Limited has attempted to obtain an updated MSDS. No update is available for the reason identified below: Manufacturer/supplier confirms this to be an uncontrolled product,
More informationProduct Description. Hazard Identification. First Aid Measures. Firefighting Procedures. Spill or Leak Procedures. Handling and Storage
Section 1 Section 2 ph Reconditioning Solution 1 Hydrogen Chloride 0.1m Product Description Product Name ph Reconditioning Kit Bottle 3 Recommended Use Equipment Calibration Synonyms None known Distributor
More informationSafety Data Sheet. Section 1 - Chemical Product and Company Identification. Bitumen Adhesive on Polymer Film with Liner
Safety Data Sheet Section 1 - Chemical Product and Company Identification Product: RA Flashing Chemical Family: Bitumen Adhesive on Polymer Film with Liner Manufacturer Information: Fiberweb, Inc 70 Old
More informationSAFETY DATA SHEET. Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY CHEMTREC:
SAFETY DATA SHEET SECTION 1. INDENTIFICATION Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY 14150 716-871-1161 800-828-7626 CHEMTREC: 800-424-9300 Product Name: Gold Plated Braided Wire, Stainless
More informationSAFETY DATA SHEET. IRWIN Chalk Light Violet, Dust-Off. October 23, 2013 Revision PRODUCT and COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION
Telephone (704) 987-4555 8935 NorthPointe Executive Park Dr. Huntersville, NC 28078 www.irwin.com IRWIN Chalk Light Violet, Dust-Off October 23, 2013 Revision 1 1. PRODUCT and COMPANY IDENTIFICATION Commercial
More informationBenzene measurement strategy
Benzene measurement strategy In the petrochemical industry, benzene vapors can hardly be avoided. Workrelated cancer, on the other hand, can be. But it requires precise monitoring of exposure to benzene
More informationSafety Data Sheet Plastatech Engineering Ltd. PlastaFlex OR
SECTION 1 Safety Data Sheet Plastatech Engineering Ltd. PRODUCT AND COMPANY IDENTIFICATION Product Name: Version: 2 Identifier 1: PVC Unsupported Film, All Colors Identifier 2: 57029, 57030, 57031, 57034,
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Product Name: TELTOS QUARTZ STONE CO,LTD MSDS Date: March 14, 2014 1. Product and Company Description TELTOS is a registered trademark of TELTOS Quartz Stone Co, Ltd. Company
More informationBenzene measurement strategy
Benzene measurement strategy In the petrochemical industry, benzene vapors can hardly be avoided. Workrelated cancer, on the other hand, can be. But it requires precise monitoring of exposure to benzene
More informationMATERIAL SAFETY DATA SHEET Page 1 of 7 Urinalysis Preservative Tube
MATERIAL SAFETY DATA SHEET Page 1 of 7 Urinalysis Preservative Tube MSDS Number: VS60340-02 Issue Date: 1/5/01 Supersedes: 01 ERCO NO. 101672 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION - SECTION 1 Company
More informationEnvironment. Indoor Air Quality and Ventilation in Photographic Processing Facilities. Kodak s health, safety, and environmental
Environment I N F O R M A T I O N F R O M K O D A K Indoor Air Quality and Ventilation in Photographic Processing Facilities J-314(ENG) $10.00 Kodak s health, safety, INTRODUCTION The Occupational Safety
More informationArc Carbons. Not applicable +1(864)
SAFETY DATA SHEET Section 1 Product and Supplier Identification Product identifier used on the label: Other means of identification: Uses (and restrictions): Supplier and contact information: Morgan Advanced
More informationCoast Multi-Purpose Gear Oils 75w90 /80w-90/ 85w-140 Page 1 of 7. PRODUCT NUMBER(S): Coast Multi-Purpose Gear Oils 75W-90 / 80w-90/ 85w-140
Coast Multi-Purpose Gear Oils 75w90 /80w-90/ 85w-140 Page 1 of 7 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER(S): Coast Multi-Purpose Gear Oils 75W-90 / 80w-90/ 85w-140 COMPANY IDENTIFICATION
More information: HORIZON PANEL 2 3/8" 4X8
SECTION 1 - PRODUCT IDENTIFICATION Trade name Product code COMPANY Telephone Emergency Phone: Product use : : TBS251 : Tremco Incorporated 3735 Green Road Cleveland, OH 44122 : (216) 292-5000 8:30-5:00
More informationMaterial Safety Data Sheet
Material Safety Data Sheet 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: OTHER/GENERIC NAMES: Polychlorotrifluoroethylene Chlorotrifluoroethene 1,1-Difluoroethene Copolymer Honeywell PCTFE
More informationImperial Gear Compound EP ISO 68, 100, 150, 220, 320, 460, 680 Page 1 of 6
Imperial Gear Compound EP ISO 68, 100, 150, 220, 320, 460, 680 Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER(S): Imperial Gear Compound EP ISO 68, 100, 150, 220, 320, 460, 680
More informationSafety Data Sheet. This material is not considered hazardous and is not classified under GHS
E-Mail: sds@finemetalscorp.com www.finemetalscorp.com 15117 Washington Highway Phone: (804) 227-3381 CHEMTREC: (800) 424-9300 P. O. Box 1055 Ashland VA Fax: (804) 227-3404 Poision Center: (800) 562-8236
More information1. PRODUCT AND COMPANY IDENTIFICATION. General Information: 2. HAZARDS IDENTIFICATION. See Section 11 for additional toxicological information.
Safety Data Sheet Issue date: 1/13/2015 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: DUALITE E135-040D Filler Company address: Chemical Intermediates Division of Chase Corporation
More informationSAFETY DATA SHEET NEMA Grades C, CE, L, LE
Page 1 of 6 SAFETY DATA SHEET NEMA Grades C, CE, L, LE Current, Incorporated Section 1. Product Name: Manufacturer: Identification NEMA Grades C, CE, L, LE Current, Incorporated 30 Tyler Street Extension
More informationMaterial Safety Data Sheet
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: OTHER/GENERIC NAMES: MBF-20 Brazing Foil/ MBF-20 Brazing Filler Metals PRODUCT USE: MANUFACTURER: Metal joining; Hard facing Metglas, Inc. 440
More informationTRISOTECH G ROOF INSULATION 1.0" Version 2. Print Date 10/16/2008 REVISION DATE: 10/15/2008
SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 305100 550 COMPANY : Tremco Incorporated 3735 Green Road Cleveland, OH 44122 Telephone : (216) 292-5000 8:30-5:00 EST Emergency Phone: : (216)
More informationADDENDUM TO SAFETY DATA SHEET
ADDENDUM TO SAFETY DATA SHEET This addendum is part of the Safety Data Sheet referred to below. This addendum should be stored with and read in conjunction with the Safety Data Sheet. Product Description
More informationSDS #009. Page 1 of 6 SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION 2. HEALTH HAZARDS IDENTIFICATION CHRONIC EFFECTS: PRODUCT NAME:
Page 1 of 6 SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: PRODUCT USE: MANUFACTURER: PHONE NUMBERS: MECHETEC Acetal esd - Electro-Static Dissipative Acetal (POM) Engineering/Industrial
More informationThe Valspar Corporation Material Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION Material Identification The Valspar Corporation Material Safety Data Sheet Product Name: GRAPHITE PEARL DP-40 Product Use: Chemical intermediate. Date Published: 2004/10/09
More informationSafety Data Sheet. Golden West Throttle Body, Choke Carburetor Cleaner SECTION 1 PRODUCT AND COMPANY IDENTIFICATION
Safety Data Sheet SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Use: Carburetor Cleaner Product Number(s): Gol 046079000015 Company Identification Golden West Packaging Co. 13598 Hwy 87 East Adkins,
More informationSafety Data Sheet (SDS) Cemented Tungsten Product with Cobalt Binder
Safety Data Sheet (SDS) Cemented Tungsten Product with Cobalt Binder SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING. 1.1 Product 1.1.1 Substance: Cemented Tungsten Product
More informationCADMIUM AWARENESS Revision Date: 04/2017
CADMIUM AWARENESS 7.1 PURPOSE 7.1.1 The purpose of this policy is to provide guidelines for safely working with cadmium. It includes provisions for training, PPE guidelines, monitoring, medical surveillance,
More information3M MATERIAL SAFETY DATA SHEET 3M(TM) SAFETY-WALK(TM) SLIP-RESISTANT COARSE TREADS No /29/2004
Material Safety Data Sheet Copyright, 2004, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
More informationWARD MANUFACTURING LLC MATERIAL SAFETY DATA SHEET (MSDS) Page 1 of 5 DATE: Dec, 1994 UPDATED July, 2008
MATERIAL SAFETY DATA SHEET (MSDS) Page 1 of 5 CONFORMS TO REQUIREMENTS OF OSHA STANDARD 1910.1200 "HAZARD COMMUNICATION" AND TO VARIOUS STATE "EMPLOYEE RIGHT TO KNOW" LAW SECTION I - PRODUCT IDENTIFICATION
More informationThe Valspar Corporation Material Safety Data Sheet
The Valspar Corporation Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION Material Identification Product Name: Product Use: Print date: Revision Date: Company Identification The Valspar
More informationMATERIAL SAFETY DATA SHEET Nickel Titanium SECTION 5 FIRE FIGHTING PROCEDURES SECTION 6 ACCIDENTAL RELEASE MEASURES SECTION 7 HANDLING AND STORAGE
SECTION 5 FIRE FIGHTING PROCEDURES Extinguishing Media: This material is not combustible in solid form. Use media that is appropriate for the surrounding fire. For fires involving fine dust or filings,
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationMaterial Safety Data Sheet
Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: 2P-10 Aerosol Activator Part Number: 2P-10 SOLO ACT 12OZ Revision Date: November 13, 2007 Company Name: FastCap LLC 3725 Irongate
More informationNOTE: Refer to Section XVII for List of Acronyms. I. PRODUCT IDENTIFICATION SHOTSHELL AMMUNITION (DUMMY)
This has been prepared in compliance with Federal OSHA Hazard Communication Standard 29 CFR 1910.1200, ANSI Z400.1-1993 and the ISO Safety Data Sheet Standard. This product may be considered to be a hazardous
More informationHEXAVALENT CHROMIUM EMPLOYEE TRAINING
ERI Safety Videos Videos for Safety Meetings 2706 HEXAVALENT CHROMIUM EMPLOYEE TRAINING Leader s Guide 2007 ERI Safety Videos HEXAVALENT CHROMIUM EMPLOYEE TRAINING This easy-to-use Leader s Guide is provided
More informationDepartment of Environmental and Occupational Health and Safety 180 E. Mill Street Akron, Ohio
Department of Environmental and Occupational Health and Safety 180 E. Mill Street Akron, Ohio 44325-0607 GENERIC CHEMICAL HYGIENE PLAN TABLE OF CONTENTS Introduction General Principles Definitions Exposure
More informationHazardous Chemical Risk Assessment
Flinders University- College of Science and Engineering Hazardous Chemical Risk Assessment Title of Procedure: ASSESSMENT NUMBER - Risk Score: Assessor s Name: Contact Number: Date of assessment: Task/Procedure:
More informationGRAND PACIFIC PETROCHEMICAL CORPORATION MATERIAL SAFETY DATA SHEET
Product: Acrylonitrile-Butadiene-Styrene Copolymer Page: 1 / 1 1. PRODUCT AND COMPANY INDENTIFICATION PHONE NUMBERS Emergency Medical (24 HOUR) 886-7-3513911 Emergency Transportation / CHEMTREC (24 HOUR)
More informationIndustrial Hygiene. Introduction to Industrial Hygiene ENVIRONMENTAL SCIENCE
Introduction to Industrial Hygiene Environmental Safety and Health ENVIRONMENTAL SCIENCE is the study of how the parts of nature and human societies operate and interact. is devoted to the control of biological,
More informationOSHA s Crystalline Silica Rule: Answers to your training questions and how to devise a proper employee training plan. Sponsored by
OSHA s Crystalline Silica Rule: Answers to your training questions and how to devise a proper employee training plan Sponsored by OSHA s Crystalline Silica Rule Answers to your training questions How to
More informationTPO 45 MIL FLEECE BACK 76" X 90' Version 1. Print Date 01/29/2009 REVISION DATE: 01/31/2008
SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : TPO45F 503 COMPANY : Tremco Incorporated 3735 Green Road Cleveland, OH 44122 Telephone : (216) 292-5000 8:30-5:00 EST Emergency Phone: : (216)
More informationEMERGENCY PHONE: or (651) (24 hours)
Material Safety Data Sheet Copyright, 2009, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
More informationINDOOR AIR QUALITY PROGRAM
INDOOR AIR QUALITY PROGRAM (Adopted from California State University Office of the Chancellor s Sample IAQ Program) 1 TABLE OF CONTENTS Page 1.0 REGULATORY AUTHORITY.........................................
More informationMaterial Safety Data Sheet
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: METGLAS 2705M Cobalt Base Magnetic Core OTHER/GENERIC NAMES: 2705M Transformer Core PRODUCT USE: MANUFACTURER: Manufacture of electric transformers
More informationChemical Name CAS No. % Other Identifiers
Safety Data Sheet SECTION 1. IDENTIFICATION Product Identifier Recommended Use Filtration sand, abrasive jet cutting and blast cleaning media. Restrictions on Use Use only as directed. Manufacturer/Supplier
More informationEcojet Garnet. Chemical Name CAS No. % Other Identifiers
Safety Data Sheet 1. SECTION 1. IDENTIFICATION Product Identifier Recommended Use Filtration sand, abrasive jet cutting and blast cleaning media. Restrictions on Use Use only as directed. Manufacturer/Supplier
More informationSECTION I - PRODUCT IDENTIFICATION. Stainless Steel Wire for GMAW, GTAW, SAW Arc Welding Processes
MATERIAL SAFETY DATA SHEET For Welding Consumables Conforms to Hazard Communication Standard 29CFR 1910.1200 "ESSENTIALLY SIMILAR" to U.S. Department of Labor Form OSHA 20 SECTION I - PRODUCT IDENTIFICATION
More information: EUCON LR - BULK GALLONS
SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 714 99 COMPANY : Euclid Chemical Company 19218 Redwood Road Cleveland, OH 44110 Telephone : 1-800-321-7628 Emergency Phone: : U.S. only: 1-800-424-9300
More informationPage 1 of 5 Hazardous Materials Handling and Communication 08/30/2012
Page 1 of 5 Hazardous Materials Handling and Communication 08/30/2012 The University of Western States (UWS) is committed to providing a safe environment for faculty, staff, students, contractors, and
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Revision Number: 002.3 Issue date: 01/12/2010 1. PRODUCT AND COMPANY IDENTIFICATION Product type: Solder Wire Item number: MM01949 Region: United States Company address: Contact
More informationMaterial Safety Data Sheet
1PRODUCT AND COMPANY IDENTIFICATION Product Name: Medallion Plus Synthetic 125 Supplier Name: PetroLiance 19 Schieffelin Rd Apex, NC 2752 Company Phone Number: 8.545.1257 Company Fax Number: 866.691.4235
More informationMATERIAL AND SAFETY DATA SHEET
MATERIAL AND SAFETY DATA SHEET Section 1 IDENTIFICATION OF THE S / COMPANY INFORMATION IDENTIFICATION: AGGLOMERATE STONE SLABS COMPANY INFORMATION: MODERN QUARTZ 1355 PALMYRITA AVE. RIVERSIDE, CA. 92507
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET ************************* I. PRODUCT IDENTIFICATION ************************* MANUFACTURER'S NAME: Balzers Tool Coating Inc. TELEPHONE NO: (716) 564-8557 ADDRESS: 495 Commerce
More informationMaterial Safety Data Sheet
. Product and Company Identification Product Name Medallion Plus SS 2650 Material Safety Data Sheet Supplier: PetroLiance 009 Schieffelin Rd Apex, NC 27502 Company Phone Number: 800.545.257 Company Fax
More informationThe Valspar Corporation Material Safety Data Sheet
The Valspar Corporation Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION Material Identification Product ID: Product Name: Product Use: Print date Revision Date 5790W90005 44-31 WHITE Paint
More informationMaterial Safety Data Sheet
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: OTHER/GENERIC NAMES: 2605S3A Transformer Core PRODUCT USE: MANUFACTURER: Manufacture of electric transformers Metglas, Inc. 440 Allied Dr. Conway,
More informationSDS SDS Number: Page 1 of 5
Page 1 of 5 Section 1 IDENTIFICATION Product Name: Low Pressure / Thermofused Melamine Manufacturer: WILSONART LLC P. O. BOX 6110 10501 H. K. DODGEN LOOP TEMPLE, TX 76503 INFORMATION PHONE: 800-433-3222
More informationGRAND PACIFIC PETROCHEMICAL CORPORATION MATERIAL SAFETY DATA SHEET
Product: Poly Butadiene Latex Page: 1 / 1 1. PRODUCT AND COMPANY INDENTIFICATION PHONE NUMBERS Emergency Medical (24 HOUR) 886-7-3513911 Emergency Transportation / CHEMTREC (24 HOUR) 886-7-3513911 Other
More informationIPAC IMPERIAL LUBE OIL Page 1 of 6
IPAC IMPERIAL LUBE OIL Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER(S): IPAC IMPERIAL LUBE OIL 5W-20, 5W-30, 10W-30, 10W-40, 15W-40, 20W-50, 10W, 30W, 40W COMPANY IDENTIFICATION
More informationSAFETY DATA SHEET Page 1 of 5
SAFETY DATA SHEET Page 1 of 5 Date Prepared: February 1, 2017 1. Product and Company Identification Jet-Lube LLC / Deacon Bldg. #1, West Point Drive Washington, PA 15301 USA Phone (724) 225-8008 24 Hour
More informationMaterial Safety Data Sheet
Material Safety Data Sheet NFPA HMIS Personal Protective Equipment 0 Health Hazard Fire Hazard 0 See Section 5. Section. Chemical Product and Company Identification Common Name/ Trade Name Manufacturer
More informationPANNIER CORPORATION 207 Sandusky Street, Pittsburgh, PA U.S.A Material Safety Data Sheet
Revision date: 01.03.12 REA-JET TAC-130 Ink Page 1 of 5 1. Product and company Identification Commercial product name Acetone Black, Blue & Red Low VOC REA-JET TAC-130 Ink Product number PANNIER-REA-JET-TAC-130-IJ260-035X-01L
More informationMSDS Product Name: KODAK Hypo Test Kit
MSDS Product Name: KODAK Hypo Test Kit Page 1 of 5 MSDS Product Name: KODAK Hypo Test Kit MATERIAL SAFETY DATA SHEET 200000849/F/USA Approval Date: 02/02/1999 Print Date: 09/18/2000 Page 1 1. CHEMICAL
More informationEmergency Overview: Causes skin and eye irritation. May cause allergic skin reaction.
24-Hour Emergency Phone: 1-888-354-3323 Effective Date: 2/26/04 Material Safety Data Sheet MSDS No: 5773 1. PRODUCT IDENTIFICATION Trade 1 2 0 Health: Flammability: Reactivity: 2* 1 0 Chemical Family:
More informationVersion 3.0 Print Date 12/19/2013 REVISION DATE: 07/08/2012
SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 19N 99 COMPANY : Euclid Chemical Company 19218 Redwood Road Cleveland, OH 44110 Telephone : 1-800-321-7628 Emergency Phone: : U.S. only: 1-800-424-9300
More informationSAFETY DATA SHEET. SECTION 1 - Identification of the Product and Company
FLEXOVIT USA INC. SAFETY DATA SHEET SECTION 1 - Identification of the Product and Company 1.1 Product Name: Flap Disc, Type 29 and 27 FIBERGLASS BACK 1.2 Product Use: For light material removal, blending
More informationMaterial Safety Data Sheet
Material Safety Data Sheet 1. IDENTIFICATION OF THE PRODUCTS AND OF THE COMPANY IDENTIFICATION OF THE PRODUCT Product Name: Aluminosilicate Fiber Products Material Name: Ceramic fiber, Aluminosilicate
More informationCADMIUM STANNATE (cas ) MSDS
Click http://www.guidechem.com/cas-121/12185-56-7.html for suppliers of this product CADMIUM STANNATE (cas 12185-56-7) MSDS 1 Identification of substance: Product details: 2 Composition/Data on components:
More informationWORKPLACE EXPOSURE LIMITS The following exposure limits are for Chromium III compounds (measured as Chromium):
Common Name: CHROMIC FLUORIDE CAS Number: 7788-97-8 DOT Number: UN 1756 ------------------------------------------------------------------------- HAZARD SUMMARY * Chromic Fluoride can affect you when breathed
More informationMATERIAL SAFETY DATA SHEET MSDS DATE: 1/5/10
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT ME: DISTRIBUTOR: D & M Chemical ADDRESS: 112 Charron Rd., Moxee, WA 98936 INFOTRAC (Transportation/Spill Emergency) 1-800-553-5053 CHEMICAL ME: CHEMICAL
More information"Facilities Excellence" Hazardous Materials AN EMPLOYEE S RIGHT TO KNOW OCTOBER 19, 2016
Hazardous Materials AN EMPLOYEE S RIGHT TO KNOW OCTOBER 19, 2016 General Information Illness and Injury Prevention Plan Required by Cal/OSHA and specifies procedures to maintain a safe work place District
More informationStandard Operating Procedure Template for Hazardous Chemicals
Title of the Project: Date: Lab Location: PI: Contact Information: Date of Review: Template for Hazardous Chemicals Emergency Procedures Describe the procedures in the event of an emergency including a
More information1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING 2. HAZARDS IDENTIFICATION
SAFETY DATA SHEET Issuing Date 15-Dec-2014 Revision Date 3-v-2015 Revision Number 1 GHS Product Identifier Product Name: 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Other
More informationSECTION I - PRODUCT IDENTIFICATION. Low Alloy Steel Wire for GMAW, GTAW and SAW Arc Welding Processes
MATERIAL SAFETY DATA SHEET For Welding Consumables Conforms to Hazard Communication Standard 29CFR 1910.1200 "ESSENTIALLY SIMILAR" to U.S. Department of Labor Form OSHA 20 SECTION I - PRODUCT IDENTIFICATION
More information