: ISE Conditioner Envoy

Transcription

1 SECTION 1 Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Mixture Product name ISE Conditioner Envoy Product code ISCO-0850 Product group Trade product 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Industrial/Professional use spec Use of the substance/mixture For professional use only. Laboratory chemical Uses advised against 1.3. Details of the supplier of the safety data sheet ELITechGroup Inc. 370 West 1700 South Logan, UT - USA T +1 (435) F +1 (435) Emergency telephone number Emergency number Contact your distributor or poison control center in your country. InfoTrac Emergency Response Calls within the USA, phone Calls outside the USA, phone (call collect) Customer ID #90104 (NOTE this number is required when a customer calls into either phone number above). SECTION 2 Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP] Met. Corr. 1 H290 Full text of H-phrases see section Label elements Labeling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayextra classification(s) to display Hazard pictograms (CLP) Signal word (CLP) Hazard statements (CLP) Precautionary statements (CLP) Warning GHS05 H290 - May be corrosive to metals P234 - Keep only in original container P390 - Absorb spillage to prevent material damage P406 - Store in corrosive resistant container with a resistant inner liner 2.3. Other hazards SECTION 3 Composition/information on ingredients 3.1. Substance Not applicable SDS ENB.docx Page 1 of 1 ELITechGroup Inc.

2 3.2. Mixture This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II SECTION 4 First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). Assure fresh air breathing. Allow the victim to rest. Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects, both acute and delayed Symptoms/injuries Not expected to present a significant hazard under anticipated conditions of normal use Indication of any immediate medical attention and special treatment needed SECTION 5 Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Foam. Dry powder. Carbon dioxide. Water spray. Sand. Do not use a heavy water stream Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Avoid (reject) fire-fighting water to enter environment. Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6 Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures Evacuate unnecessary personnel. Equip cleanup crew with proper protection. Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. Absorb spillage to prevent material damage. SECTION 7 Handling and storage 7.1. Precautions for safe handling Additional hazards when processed Precautions for safe handling May be corrosive to metals. Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work. Provide good ventilation in process area to prevent formation of vapor Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Store in a well-ventilated place. Keep only in original container. Keep container closed when not in use. Strong bases. strong acids. SDS ENB.docx Page 2 of 1 ELITechGroup Inc.

3 Incompatible materials Packaging materials Sources of ignition. Direct sunlight. Store in corrosive resistant/ container with a resistant inner liner Specific end use(s) SECTION 8 Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Personal protective equipment Hand protection Eye protection Respiratory protection Safety glasses. Gloves. Avoid all unnecessary exposure. Wear protective gloves Chemical goggles or safety glasses. Respiratory protection not required in normal conditions. Wear approved mask. Other information When using, do not eat, drink or smoke. SECTION 9 Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Liquid Color Colorless. Odor characteristic. Odor threshold ph Relative evaporation rate (butyl acetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) Non flammable. Vapor pressure Relative vapor density at 20 C Relative density Solubility Water Log Pow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidizing properties Explosion limits 9.2. Other information SECTION 10 Stability and reactivity Reactivity SDS ENB.docx Page 3 of 1 ELITechGroup Inc.

4 10.2. Chemical stability Not established Possibility of hazardous reactions Not established Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials strong acids. Strong bases. Metals. May be corrosive to metals Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. SECTION 11 Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential Adverse human health effects and symptoms. SECTION 12 Ecological information Toxicity Persistence and degradability ISE Conditioner Envoy Persistence and degradability Bioaccumulative potential ISE Conditioner Envoy Bioaccumulative potential Not established. Not established Mobility in soil Results of PBT and vpvb assessment Other adverse effects Additional information Avoid release to the environment SDS ENB.docx Page 4 of 1 ELITechGroup Inc.

5 SECTION 13 Disposal considerations Waste treatment methods Waste disposal recommendations Ecology - waste materials ISE Conditioner Envoy Dispose in a safe manner in accordance with local/national regulations. Avoid release to the environment. SECTION 14 Transport information In accordance with ADR / RID / IMDG / IATA / ADN UN number UN-No. (ADR) 1824 UN-No. (IMDG) 1824 UN-No.(IATA) 1824 UN-No.(ADN) 1824 UN-No. (RID) UN proper shipping name Proper Shipping Name (ADR) Proper Shipping Name (IMDG) Proper Shipping Name (IATA) Proper Shipping Name (ADN) Proper Shipping Name (RID) Transport document description (ADR) Transport document description (IMDG) SODIUM HYDROXIDE SOLUTION SODIUM HYDROXIDE SOLUTION SODIUM HYDROXIDE SOLUTION SODIUM HYDROXIDE SOLUTION SODIUM HYDROXIDE SOLUTION UN 1824 SODIUM HYDROXIDE SOLUTION, 8, III, (E) UN 1824 SODIUM HYDROXIDE SOLUTION, 8, III Transport hazard class(es) ADR Transport hazard class(es) (ADR) 8 Hazard labels (ADR) 8 IMDG Transport hazard class(es) (IMDG) 8 Hazard labels (IMDG) 8 IATA Transport hazard class(es) (IATA) 8 Hazard labels (IATA) 8 ADN Transport hazard class(es) (ADN) 8 Hazard labels (ADN) 8 SDS ENB.docx Page 5 of 1 ELITechGroup Inc.

6 RID Transport hazard class(es) (RID) 8 Hazard labels (RID) Packing group Packing group (ADR) Packing group (IMDG) Packing group (IATA) Packing group (ADN) Packing group (RID) Environmental hazards Dangerous for the environment Marine pollutant Other information III III III III III No No No supplementary information available Special precautions for user - Overland transport Classification code (ADR) Limited quantities (ADR) Excepted quantities (ADR) Packing instructions (ADR) Mixed packing provisions (ADR) Portable tank and bulk container instructions (ADR) Portable tank and bulk container special provisions (ADR) Tank code (ADR) Vehicle for tank carriage C5 5L P001, IBC03, LP01, R001 MP19 T4 TP1 L4BN AT Transport category (ADR) 3 Special provisions for carriage - Packages (ADR) V12 Hazard identification number (Kemler No.) 80 Orange plates Tunnel restriction code (ADR) EAC E 2R - Transport by sea Special provision (IMDG) 223 Limited quantities (IMDG) 5 L Excepted quantities (IMDG) Packing instructions (IMDG) P001, LP01 IBC packing instructions (IMDG) IBC03 Tank instructions (IMDG) T4 SDS ENB.docx Page 6 of 1 ELITechGroup Inc.

7 Tank special provisions (IMDG) EmS-No. (Fire) EmS-No. (Spillage) Stowage category (IMDG) TP1 F-A S-B A - Air transport PCA Excepted quantities (IATA) PCA Limited quantities (IATA) PCA limited quantity max net quantity (IATA) Y841 1L PCA packing instructions (IATA) 852 PCA max net quantity (IATA) 5L CAO packing instructions (IATA) 856 CAO max net quantity (IATA) Special provision (IATA) ERG code (IATA) - Inland waterway transport Classification code (ADN) Limited quantities (ADN) Excepted quantities (ADN) Carriage permitted (ADN) Equipment required (ADN) 60L A3 8L C5 5 L T Number of blue cones/lights (ADN) 0 Carriage prohibited (ADN) Not subject to ADN - Rail transport Classification code (RID) Limited quantities (RID) Excepted quantities (RID) Packing instructions (RID) Mixed packing provisions (RID) Portable tank and bulk container instructions (RID) Portable tank and bulk container special provisions (RID) Tank codes for RID tanks (RID) PP, EP No No C5 5L P001, IBC03, LP01, R001 MP19 T4 TP1 Transport category (RID) 3 Special provisions for carriage Packages (RID) Colis express (express parcels) (RID) L4BN W12 CE8 Hazard identification number (RID) 80 Carriage prohibited (RID) No Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable SECTION 15 Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations Contains no substances with Annex XVII restrictions Contains no REACH candidate substance Contains no REACH Annex XIV substances National regulations Not listed on the United States TSCA (Toxic Substances Control Act) inventory Germany VwVwS Annex reference Water hazard class (WGK) 3, strongly hazardous to water (Classification according to VwVwS, Annex 4.) SDS ENB.docx Page 7 of 1 ELITechGroup Inc.

8 12th Ordinance Implementing the Federal Immission Control Act - 12.BImSchV Is not subject of the 12. BlmSchV (Hazardous Incident Ordinance) Denmark Recommendations Danish Regulation Young people below the age of 18 years are not allowed to use the product Pregnant/breastfeeding women working with the product must not be in direct contact with the product Chemical safety assessment No chemical safety assessment has been carried out SECTION 16 Other information Data sources REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. Other information Full text of R-, H- and EUH-phrases None. Met. Corr. 1 Corrosive to metals Category 1 H290 May be corrosive to metals SDS EU Custom - EBS This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product Reason for Change Added H290 rating. SDS ENB.docx Page 8 of 1 ELITechGroup Inc.