C U R R I C U L U M V I T A E O F A N N L E E B E ( M E C H ) H O N S 1, D I P. E D., P H D ACADEMIC QUALIFICATIONS WORK EXPERIENCES

Transcription

1 C U R R I C U L U M V I T A E O F A N N L E E B E ( M E C H ) H O N S 1, D I P. E D., P H D Ann.Lee@adpoly.ac.ae ACADEMIC QUALIFICATIONS Dec 2011 Jan 2010 Dec 2007 May 2005 Doctor of Philosophy in Mechanical Engineering with thesis titled Numerical study of heat transfer enhancement in micro-channels using synthetic jets, University of New South Wales, Australia. Diploma of Educational Studies, The College of Teachers, University of London, United Kingdom Bachelor degree of Mechanical Engineering, First class honours, University of New South Wales, Australia Diploma in Mechanical Engineering with Dean s Award and University Medal, University of Technology Malaysia, Malaysia WORK EXPERIENCES Aug Current Sept July 2014 Jan Aug 2011 July Dec 2010 Mar June 2010 Dec Feb 2007 Senior Lecturer in Electromechanical Engineering Technology department, Institute of Applied Technology, Abu Dhabi, U.A.E. Associate lecturer in School of Mechanical and Manufacturing Engineering, UNSW Academic Representative in the Occupational Health and Safeway Committee, School of Mechanical and Manufacturing Engineering, UNSW Deputy Thesis Coordinator in School of Mechanical and Manufacturing Engineering, UNSW S Research fellow in School of Mechanical and Manufacturing Engineering, UNSW Associate lecturer (part-time) in School of Mechanical and Manufacturing Engineering Casual academic, undergraduate discipline to postgraduate by coursework in UNSW Research student. Conducted research in Carbon Nanotubes material in a Cooperative Research Centre for Advanced Composite Structures Pty Ltd (CRC-ACS) TEACHING AREAS Abu Dhabi Polytechnic, Institute of Applied Technology Course convenor for: EME115 Kinematics of Machinery EME205 Heating, Ventilation and Air Conditioning EME206 Applied Industrial Maintenance The University of New South Wales Involved in the lecturing, tutoring, courses development for both undergraduate and postgraduate courses in Mechanical and Aerospace Engineering and Naval Architecture disciplines:

2 MATH2089 Numerical Methods and Statistics MECH3540 Computational Engineering MECH9620 Computational Fluid Dynamics MMAN3300 Engineering Mechanics 2 MMAN3200 Linear Systems and Control MMAN2400 Mechanics of Solids MMAN2100 Engineering Design 2 MMAN1300 Engineering Mechanics 1 AVEN2230 Aviation Technologies AERO3630 Aerodynamics NAVL3620 Ship Hydrodynamics SERVICE TO THE SCHOOL, FACULTY AND UNIVERSITY Health and Safety Academic Representative for School of Mechanical and Manufacturing Engineering since August 2013 Played the role as deputy thesis coordinator in School of Mechanical and Manufacturing Engineering in S organising thesis conference and poster session. Play an active role in bringing the research teams together within the school and produced several journal publications o Connect Energy, Fluids and Environment research team with Advanced Structures and Materials team in the Magnetorheological Fluids project. o Connect Energy, Fluids and Environment research team with Advanced Manufacturing team in the abrasive waterjet project. Collaborate inter-school research groups o Working closely with the Director of Australia Energy Research Institute (AERI) and School of Electrical Engineering in Super capacitor cooling system project. CONSULTING WORK AND INDUSTRIAL EXPERIENCE Rheem - As a consultant for the use of propane as refrigerant in heat pump water heating system. ANSTO Adviser and leading the heat exchanger design problem for nuclear reactor cooling. RESEARCH AREAS Computational fluid dynamics, Conjugate heat transfer Microfluidics, Micro-channel, Micro-synthetic jet, Nanofluids Magnetorheological Fluids and Magnetocaloric effect Moving methodology/ Mesh deformation Multiphase flow, Gas-liquid flow, Solid-liquid flow Fluid Structure Interaction THESIS SUPERVISION Period of supervision Number of student supervision (Honours degree): over 20 students Number of student supervision (Ph.D.) : 2 Ongoing

3 AWARDS AND SCHOLARSHIPS Scholarship funded by School of Mechanical and Manufacturing Engineering, UNSW 2010 The Postgraduate Research Student Support (PRSS) travel fund Australian Research Council (ARC) discovery PhD Scholarship, Warrane College Scholar 2007 Dean s Honours List, UNSW Taste of Research Summer Scholarship, UNSW 2005 Dean s award, University Medal, UTM, Malaysia PROFESSIONAL EXTRA-MURAL ACTIVITIES (i) Reviewer (ii) Member Refereed Journal Papers Modeling and Simulation in Engineering Advances in Computational Fluid Dynamics Advances in Mechanical Engineering Refereed Conference Papers Proceedings of the ASME International Conference of Nano, Micro and Mini Channel Proceedings of the ASME Fluids Engineering Summer Meeting International Conference of Mechanical Engineering ICME14 American Society of Mechanical Engineers (ASME) Engineers Australia (iii) Session Organizer and Chair Microfluidics Summer Forum, 2013 Fluids Engineering Summer Meeting, 2013 ACCREDITED LICENCES AND COMPETENCE Simulation packages ANSYS CFX (CFD and FEA), LEAP Australia, STAR-CCM+, CD-adapco, Excellent skill and knowledge in FORTRAN, MATLAB CAD modelling packages: CATIA, Pro-Engineer, NASTRAN, STRAND7 Experimental equipment and setup Capable in running several solids testing machine such as beam stress, statics and dynamics rig testing Experienced in conducting MR damper experiment for cyclic and monotonic loading Pulley system Courses Work Health & Safety Training, Effective Health & Safety Committee Course, November 2013

4 PUBLICATIONS Journal papers 1. Lee A., Lau G.E., Li, D.D. and Yeoh G.H., 2014, Numerical Investigation of Heat Transfer Enhancement in Micro-channel Equipped with a Synthetic Jet using Nanofluids, International Journal of Heat and Mass Transfer (under review) 2. Lee A., Goh, J.J., 2014, Thermal Performance of a Pair of Synthetic Jets Equipped in Microchannel: Effect of Impingement Distance and Actuation Phase, International Journal of Thermal Science (under review) 3. Kuang, W., Lee A., 2014, Experimental, Exergy and Simulation Study of Propane Refrigerant for Heat Pump Water Heaters, International Journal of Refrigeration (under review) 4. Lee, A., Li, D.D., 2014, A Review of the Role of Impinging and Synthetic Jets on Heat Transfer Enhancement, Renewable and Sustainable Energy Reviews (under review) 5. Li, H.Z., Lee, A., Yeoh, G.H., Wang, J, 2014 On DEM-CFD study of the dynamic characteristics of high speed micro-abrasive air jet, Powder Technology, vol. 267, pp Gomang, G.G and Lee, A, 2014, An Assessment of Turbulence Models in Simulating a Synthetic Jet, Applied Mechanics and Materials, vol , pp Fadzin, K.A. and Lee, A, 2014, Heat Transfer Enhancement in Microchannel using Nanofluids, Applied Mechanics and Materials, vol , pp Goh JJ; Lee A, 2014, 'Investigation of Phasing on Synthetic Jet Actuator Arrays', Applied Mechanics and Materials, vol , pp Lim SH; Prusty BG; Lee A; Yeoh GH, 2013, 'Experimental Investigation and Control of Magnetorheological Damper towards Smart Energy Absorption based Composite Structures for Crashworthiness', Journal of Multifunctional Composites, vol 1, no Lee A; Yeoh GH; Lim SH; Prusty BG, 2013, 'Investigation of the Effect of Magnetic Field on Ferrofluid in Micro Electromechanical devices (MEMS)', International Journal of Smart and Nano Materials (in press) 11. Lee A; Timchenko V; Yeoh GH; Reizes JA, 2013, 'Effect of Variable Properties on Heat Transfer in Micro-channel with Synthetic Jet', Computational Thermal Sciences, Lee, A and Yeoh, G.H., 2013, Application of an Efficient Moving-Grid Methodology to Model a Synthetic Jet, Advances in Mathematical and Computational Methods, vol 3(2), pp Lee A; Yeoh GH; Timchenko V; Reizes JA, 2012, 'Flow structure generated by two synthetic jets in a channel: Effect of phase and frequency', Sensors and Actuators A: Physical, vol. 184, no. September 2012, pp Lee A; Timchenko V; Yeoh GH; Reizes JA, 2012, 'Three-dimensional modelling of fluid flow and heat transfer in microchannels with synthetic jet', International Journal of Heat and Mass Transfer, vol. 55, no. 1-3, pp Lee A; Yeoh GH; Timchenko V; Reizes JA, 2012, 'Heat transfer enhancement in micro-channel with multiple synthetic jets', Applied Thermal Engineering, vol. 48, no. 15 Dec 2012, pp Lee A; Yeoh GH; Timchenko V; Reizes JA, 2011, 'Numerical computation and investigation of the characteristics of microscale synthetic jets', Modelling and Simulation in Engineering, vol. 2011, no. Article number , pp. 1 8 Peer Reviewed Conference paper 1. Lee, A, Li, D.D., Lau, G.E. and Yeoh, G.H., 2014, Thermal Performance of Nanofluids in Microchannel Equipped with a Synthetic Jet Actuator, 15 th International Heat Transfer Conference, IHTC15, Kyoto, Japan August 2. Tang, T.K, Lee, A and Yeoh, G.H., 2014, Heat Transfer Enhancement in Heat Exchanger Pipe with Dimples and Protrusions, 15 th International Heat Transfer Conference, IHTC15, Kyoto, Japan August 3. Gomang, G.G and Lee, A, 2013, An Assessment of Turbulence Models in Simulating a Synthetic Jet, 4 th International Conference on Mechanical and Manufacturing Engineering, ICME2013, Bangi, Malaysia December 4. Fadzin, K.A. and Lee, A, 2013, Heat Transfer Enhancement in Microchannel using Nanofluids, 4 th International Conference on Mechanical and Manufacturing Engineering, ICME2013, Bangi, Malaysia December 5. Goh, J.J. and Lee, A, 2013, Investigation on Phasing on Synthetic Jet Actuators Arrays, 4th International Conference on Mechanical and Manufacturing Engineering, ICME2013, Bangi, Malaysia December 6. Kelly, M, Lee, A and Yeoh, GH, 2013, A Computational Fluid Dynamics Approach to Magnetic Drug Targeting, 3rd International Conference on Computational & Mathematical Biomedical Engineering, Hong Kong SAR, December 7. Lim, SH, Prusty, G, Lee, A and Yeoh, GH, 2013, Experimental development and control of magnetorheological damper towards smart energy absorption of composite structures, The 4th International Conference on Smart Materials and Nanotecchnology in Engineering (SMN2013), Gold Coast, Australia, July

5 8. Lee, A, Yeoh, GH, Prusty, G and Lim, SH, 2013, Investigation of the effect of magnetic field on ferrofluid in micro electromechanical devices (MEMS), The 4th International Conference on Smart Materials and Nanotecchnology in Engineering (SMN2013), Gold Coast, Australia, July 9. Lee, A, Zschirnt, M and Yeoh, GH, 2013, Effects of Operating Frequency of A Synthetic Jet and Cross Flow Velocity on the Heat Transfer Enhancement in A Micro-channel, ASME 2013 Fluids Engineering Division Summer Meeting, Incline Village Nevada, July Lee, A and Yeoh, G.H., 2013, Application of an Efficient Moving-Grid Methodology to Model a Synthetic Jet, 2013 International Conference on Engineering and Technology, ICET 2013, Los Angeles, USA, July Lee, A, Timchenko, V, Yeoh, GH & Reizes, JA, 2012, 'Forced convection in micro-channel with synthetic jet: Effect of operating frequency', in Proceedings of the ASME th International Conference on Nanochannels, Microchannels, and Minichannels, presented at 10th International Conference on Nanochannels, Microchannels and Minichannels, Puerto Rico, United States, July 8-12, Lee, A, Reizes, JA, Timchenko, V & Yeoh, GH, 2012, 'Effect of channel pressure difference in heat transfer enhancement in m', in Proceedings of the 5th International Symposium on Advances in Computational Heat Transfer, Begell House, Inc., Redding, CT, USA, presented at International Symposium Advances in Computational Heat Transfer, Bath, UK, 1-6 July, Lee, A, Timchenko, V., Yeoh, GH and Reizes, JA, Lee, A, Timchenko, V, Yeoh, GH & Reizes, JA, 2011, 'Effect of the Variable Properties on Heat Transfer in Micro-Channel with Synthetic Jet', in 9AHMTC Organization, Monash University, Monash University, Melbourne, presented at 9th Australasian Heat and Mass Transfer Conference, Monash, Melbourne, 2nd-4th November Lee, A, Timchenko, V, Yeoh, GH & Reizes, JA, 2010, 'Three-dimensional Modelling of Heat Transfer in Micro- Channels with Synthetic Jet', in Proceedings of the 14th International Heat Transfer Conference IHTC14, ASME, USA, presented at International Heat Transfer Conference, Omni Shoreham Hotel, Washington D.C., August 8-13,