SAFETY DATA SHEET ASM 1, MAT 130. Page 1 of 7. Section 1: Product and Company Identification MAT 130. Product use description.

Transcription

1 Section 1: Product and Company Identification Product name Product use description Supplier details ASM 1 MAT 130 Catalyst Perma Pure 1001 New Hampshire Ave Lakewood, NJ 0701 Phone Fax info@permapure.com Section 2: Hazards Identification Form Color Pellets White Odor Classification of the substance or mixture None Serious eye damage, Category 1 GHS Label elements, including precautionary statements Symbol(s) : Signal word Hazard statements Precautionary statements Danger Causes serious eye damage Prevention: Wear protective gloves I eye protection I face protection Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER and doctor/physician. Carcinogenicity No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP, IARC, or OSHA. Page 1 of 7

2 Section 3: Composition/Information on Ingredients Chemical Nature: Mixture Chemical Name CAS No. Silicon ortho phosphate Silica (amor phous) Concentration >99.00% <1.00% Note As made, there is no Phosphoric acid present. If material comes into contact with water, up to 65 wt% Phosphoric acid can be generated. Section 4: First Aid Measures I n halation: Skin contact: Eye contact: Ingestion: Remove to fresh air. If symptoms persist, call a physician. Wash off with soap and plenty of water. If ski n irritation persists, call a physician. Rinse immediately with plenty of water for at least 15 minutes. If eye irritation persists, call a physician. Do NOT induce vomiting. Call a physician immediately. Notes to physician Treatment: Section 5: Firefighting Measures Suitable extinguishing media: Specific hazards d uring Firefighting: Special protective equipment for firefighters: When the catalyst or catalyst d ust contacts water, corrosive phosphoric acid will form. Not combustible. Use exti nguishing measures that are a ppropriate to local circumstances and the surrounding environment. The product itself does not burn. The used product can retain material of a hazardous nature. Identify that material and inform the firefighters. Wear suitable protective clothing. In the case of respirable dust and/or fumes, use self contained breathing apparatus Section 6: Accidental Release Measures Personal precautions: Environmental precautions: Methods for cleaning up: For personal protection, see section. No special environmental precautions required. Sweep, shovel, or vacuum spilled product into appropriate containers. (Do not use a vacuum if material has contacted a hydrocarbon material.) Pick up and arrange d isposal without creating dust. Never return spills to original containers for reuse. Keep material dry; contact with water or moisture will release phosphoric acid. The acidic runoff can be neutralized with lime. Spilled product should be disposed of in accordance with all applicable governmental regulations. Page 2 of 7

3 Section 7: Handling and Storage Handling: Storage Handle and open container with care. Avoid dust formation. Avoid contact with skin and eyes. Provide an electrical ground connection during loading and transfer operations to avoid static discharge in an explosive atmosphere and to prevent persons hand ling the product from receiving static shocks. Store in original container. Keep containers dry and tightly closed to avoid moisture absorption and contamination. Store in a cool area. Section : Exposure Controls I Personal Protection Protective measures: Engineering measures: Eye protection: Hand protection: Skin and body protection: Respiratory protection: Handle in accordance with good industrial hygiene and safety practice. Ensure adequate ventilation, especially in confined areas. Safety glasses Safety goggles Protective gloves Lightweight protective clothing In case of insufficient ventilation, wear suitable respiratory equipment. Breathing apparatus with filter: NIOSH classification N 100. If oil/liquid aerosols are present, wear breathing apparatus with filter NIOSH classification P 100 (42 CFR 4) Exposure guidelines Contains no substances with occupational exposure limit values. Section 9: Physical and Chemical Properties Physical state: Color: Odor: ph: Melting point/range: Boiling point/boiling range: Flash point: Density: Specific gravity: Water solubility: Pellets White None Not applicable > 400 C Not applicable Not applicable > 2.0 grams/cm' >2 Soluble Page 3 of 7

4 Solubility in other solvents: Decomposition temperature: Bulk density: Stable under normal conditions. Heating can release hazardous gases, Phosphorus oxides (e.g. Phosphorus pentoxide) For further information, refer to the product technical data sheet. Section 10: Stability and Reactivity Possibility of hazardous reactions: Incompatible materials to avoid: Hazardous decomposition products: Stable Moisture or water contact, temperatures in excess of 7SO F (400'). No decomposition if stored normally. Phosphoric acid upon contact with water or moisture, POx at temperatures above 7SO'F (400'C). Section 11: Toxicological Information Acute oral toxicity: Acute inhalation toxicity: Acute dermal toxicity: Skin irritation: Eye irritation: Further information: LO5O: > 5,000 mg/kg Species: Rat LO5O: > 2,000 mg/kg Species: Rabbit Species: Rabbit Result: Mild skin irritation Test substance: Dry product Species: Rabbit Classification: Severe eye irritation Test substance: Dry product Note: Avoid repeated exposure. Section 12: Ecological Information Eco toxicity effects Toxicity to fish: Toxicity to daphnia and Other aquatic invertebrates: Toxicity to algae: Elimination information (persistence and degradability) Biodegradability: Bioaccumulation: Mobility: Page 4 of 7

5 Section 13: Disposal Considerations Disposal methods: Waster material may exhibit the U.S. EPS's RCRA hazardous waster characteristic of Corrosivity (D002) in the presence of water if a representative sample exhibits a ph of 2 or less. The used product can contain material of a hazardous nature. Identify that material and dispose accordingly. Section 14: Transport Information DOT IATA UN/ID No.: Proper shipping name: Class: Packing group: Hazard labels: UN/ID No.: Description of the goods: Class: Packing group: Hazard labels: Packing instruction (cargo aircraft): Packing instruction (passenger aircraft): Packing instruction (passenger aircraft): UN 3260 CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Silicon orthophosphate) Ill UN 3260 CORROSIVE SOLID, ACIDIC, INORGANIC, N.0.5. (Silicon orthophosphate) Ill Y45 IMDG UN/ID No.: Description of the goods: Class: Packing group: Hazard labels: EmS Number: Marine pollutant: UN 3260 CORROSIVE SOLID, ACIDIC, INORGANIC, N.0.5. (Silicon orthophosphate) Ill F A, S B No Page 5 of 7

6 Section 15: Regulatory Information Inventories U.S. Toxic Substances Control Act: Australia. Industrial Chemical (Notification and Assessment) Act: Canada. Canadian Environmental: Protection Act (CEPA). Domestic Substances List (DSL) Japan. Kashin Hou Law List: Korea. Toxic Chemical Control Law: (TCCL) List Philippines. The Toxic Substances and Hazardous and Nuclear Waste Control Act China. Inventory of Existing Chemical Substances New Zealand. Inventory of Chemicals (NZioC), as published by ERMA New Zealand On TSCA inventory. Not in compliance with the inventory. All components of this product are on the Canadian DSL. Not in compliance with the inventory. On the inventory, or in compliance with the inventory. Not in compliance with the inventory. On the inventory, or in compliance with the inventory. Not in compliance with the inventory. National regulatory information SARA 302 components: SARA 313 components: SARA 311/312 hazards: No chemicals in this material are subject to the reporting requirements of SARA Title Ill, Section 302 This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title Ill, Section 313. Acute health hazard Chronic health hazard California Prop. 65: Massachusetts RTK: New Jersey RTK: Pennsylvania RTK: WHMIS classification: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. Silicon orthophosphate E: Corrosive material Page 6 of 7

7 Section 16: Other Information Health hazard: Flammability: Physical hazard: Instability: HMIS Ill NFPA Hazard rating and rating systems (e.g. H MIS III, NFPA): This information is intended solely for the use of individuals trained in the particular system. Further information The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use processing, storage transportation, disposal, and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Final determination of suitability of any material is the sole responsibility of the user. This information should constitute a guarantee for any specific product properties. Changes since the last version: Does not apply Previous issue date: Does not apply Page 7 of 7