Maximum performance and durability TCE 443x-24 / 447x

Transcription

1 Maximum performance and durability TCE 443x-24 / 447x 1

2 TCE 443x-24 / 447x Maximum performance and durability Ergonomic and easy to use for maximum performance Bosch TCE / and TCE 4470/4475 tilt-back tyre changers provide a range of innovative features designed for maximum speed, performance and durability even for the toughest UHP or RFT passenger car and light commercial tyres. With the addition of a special accessory kit, these machines can also handle motorcycle tyres. Bosch TCE330, the new helper arm device is especially designed for tyre specialists and high volume workshops. Both tyre changers can also be equipped with the lift TSL 230 which allows you to work always in an ergonomic position. Key features Big space for wheel seating outside clamping 24/28 inch and wheel width up to 12,5/15 inch without any special pre-adjustment Revolutionary Ergo Control bead breaker makes the operation safe, quick, precise and comfortable TCE 330, helper arm with two independent pressing points TSL 230 lift as accessory with integrated roller board WDK approved* Certified for RunFlat and UHP-tyres Without any efforts* Pneumatic locking of the mounting head and movement of the TLL 130 allows to perfectly follow the rim profile making easier the access of the tools and allowing perfect bead extraction. For all wheel sizes and high volumes workshops Big space for wheel seating, outside clamping 24"/28", wheel width up to 12,5/15" without any special accessories Within reach Control switches are placed to be accessible from any working area New TCE 330* Helper arm device ergonomic and flexible Extreme precision The horizontal arm and the follower arm allow a precise and smooth control in the whole process 5500 N and 2500 N Time saver The redesigned jaws protectors allow steel rims internal clamping without time-consuming conversion Full control, maximum reliability The control by using the lever gives the operator a maximum of sensitivity and protects the rim Ergo control* (patent pending) saving time with more comfort and safety The new hand bead breaker system allows to execute the operation always in an ergonomic working position Speedy The two-speed turntable is easily operated using a pedal TCE TCE 4470 S441 *Available only for specific models 2 3

3 Your choice your requirements: TLL 130, IT and Ergo Control TCE 330, TSL 230, G-Frame and two drive motors TLL 130 tyre leverless system TCE 330 helper arm device: ergonomic and flexible Movement of the TLL 130 allows to perfectly follow the rim profile making The TCE 330 is a pneumatic device featuring two easier the access of the tools and allowing perfect bead extraction. The separately controlled arms which simplify mounting and hexagonal vertical arm allows less flexion ensuring the best results. The demounting of UHP and RFT tyres. TCE 330 is designed upgraded TLL 130 with it`s new surface treatment is approved from WDK to offer a great user experience, control switches are and BMW. placed to be accessible from any working area and together with the higher positioning of the follower arm IT inflation technology facilitate all operations on the tyre bead. Tyre inflation and blast of air are controlled by pedal Tyre inflation assistance system through the jaws, which thanks to the new TSL 230 simple and easy to use design, guarantees higher air jet power All new tyre changer platforms can be upgraded with Tyre inflation system is controlled by a side pedal and is up to 25 % faster the TSL 230 which allows the operator to always work than similar devices. in an ergonomic position. The TSL 230 is mounted on the right side of the machine next to the bead breaker Ergo Control (patent pending) system: a revolution in tyre changing which allows for improved productivity. The lift is also They can be equipped with the NEW Ergo Control: the bead breaker is equipped with an integrated roller board which leads to controlled by the handle rather than a pedal making the bead breaking an easier and faster bead breaking operation. TLL 130 tyre leverless system operation safe, quick, precise and comfortable. Ergonomic working position the back is less stressed with respect to the traditional system, just stand in front of the wheel. Increased safety the use of the main bead breaker lever (patented) avoids shock to the operators arm making bead breaking a safe operation. Maximum control the control by using the lever gives the operator a maximum of sensitivity. Increased speed the bead breaker can be stopped immediately the bead is unseated - no need to fully open or close the blade. Less cost reduction of air consumption. G-Frame: durable and functional design At the heart of the new tyre changers is the unique Bosch G-Frame concept. This advanced design feature increases the rigidity of the machine to shorten the flow of internal forces and providing superior control handling tyre and rim. It also improves the speed of the tyre change. Innovation and user-friendliness The two-speed turntable is easily operated using a pedal. In the 230 V version, a special electronic system automatically ensures higher torque and a smooth start. The revised design of the turntable makes it easier to clamp the rim. The redesigned jaw protectors allow internal clamping of steel rims without time-consuming conversion. The integrated tyre inflation system is controlled by a side pedal. IT inflation technology Ergo Control (patent pending) TCE 330 helper arm device TSL 230 Lift G-Frame 4 5

4 Advantages and some more information Accessory program to improve your work Convenient tyre changing Self-centring four-jaw chuck Save time, no need to remove plastic jaws protection for steel rims inside clamping thanks to their new design 100 mm diameter of mounting column cylinder guarantees column and mounting head stability Optimized storage/holder for bead lever Universal, flexible adjustment of the lubricant ring shaped holder, one fits for all Reduced effort for the operator increased safety and speed! Be flexible and optimize your job. Save time thanks to 40 % faster bead breaking cylinder Cushioned cylinder for rapid but smooth movement, of the vertical tilting back pole, at the end of the stroke Time saving tyre inflation, 25 % faster than other comparable brands. Now easier to reach double-scale pressure gauge (bar/psi) on the side of the pole Fast clamping thanks to the new self centring table top Bright yellow warning and knee protection safety signs at turntable cylinders ("yellow fin") Special treatment to protect the turntable from dust and rust. Clean has never been so easy! (patent pending) By a simple movement it is possible to reach the max. turntable working range Scope of delivery: 1x Roller board for bead breaker 1x Bead pressing device 1x Bead breaker plastic protection 1x Wing side protection for demounting head 1x Tongue protection kit for demounting head 1x Jaws plastic protection kit 1x Bead lever 1x Lubricant brush 1x TCE 330 helper arm device* 1x Ergo Control* 1x TLL 130 tyre leverless system* Order Nr. / Description Pressing point Jaws plastic protection kit (4 pcs.) Demounting head tongue protection (5 pcs.) Bead breaker plastic protection Storage kit Order Nr. / Description TSL Motorbike / scooter adaptors Motorbike mounting head kit Bead breaking bearing motorbike wheel Plastic mounting / demounting head complete with adaptor with more roboust desing and inch scale laser printed Plastic rim protection Bead pressing device (thick) Technical data TCE 443x-24 TCE 447x Power supply 400 V 3 ph 50 Hz 230 V 1 ph 50/60 Hz Rim diameter external clamping 10" 24" 12" 28" 400 V 3 ph 50 Hz 230 V 1 ph 50/60 Hz Kit WDK for run flat and ultra high performances tyres External IT kit (4470 models only) Rim diameter internal clamping 12" 28" 13" 32" Rim width 3" 12,5" 4" 15" (with TLL) 3" 15" 4" 15" (with TLL) Max. wheel diameter 1200 mm 1200 mm Air pressure 8 10 bar 8 10 bar Rotational speed of the turntable TCE 330: max. press force 7 RPM (lower speed) 15 RPM (higher speed) 5500 N (horizontal arm) 2500 N (follower arm) 7 RPM (lower speed) 15 RPM (higher speed) 5500 N (horizontal arm) 2500 N (follower arm) Bead breaker range mm mm Bead breaking force N N *Available only for specific models Modelle TCE 443x-24 IT device Ergo Control TLL 130 TCE S121 TCE S40 TCE S401 TCE S421 TCE S43 WDK kit RAL 6018 RAL V 1 ph 400 V 3 ph Models TCE 447x IT device Ergo Control TLL 130 TCE 4470 S121 TCE 4470 S40 TCE 4470 S401 TCE 4470 S421 TCE 4470 S43 WDK kit RAL 6018 RAL V 1 ph 400 V 3 ph TCE S431 TCE 4470 S431 TCE S44 TCE 4470 S44 TCE S441 TCE 4470 S441 TCE S47 TCE 4470 S47 TCE S471 TCE 4470 S471 TCE S121 TCE 4475 S121 TCE S421 TCE 4475 S43 TCE S43 TCE 4475 S431 TCE S431 TCE 4475 S44 TCE S44 TCE 4475 S441 TCE S

5 What drives you, drives us. Technology from Bosch is used in practically every vehicle in the world. For us, the focus is on people and helping them to stay mobile. We have been dedicated to people for more than 125 years with our pioneering spirit, research, production and expertise. Our dedication is an unwaivering commitment to providing them with a unique combination of parts, diagnostics, workshop equipment and services: state-of-the-art solutions for efficient vehicle repairs innovative workshop equipment and software also available on favorable lease terms the world s largest range of new and remanufactured spare parts fast, reliable delivery service expert customer care via our hotline extensive range of training courses specific sales and marketing support plus many other services Subject to technical and program changes. Bosch products and services Diagnostics Diesel systems Gasoline systems Brake systems Spark plugs Energy systems Batteries Filters Wiper systems Light technology Comfort electronics Hybrid/e-mobility Technical hotline Knowledge database Service training Workshop concepts Robert Bosch GmbH Automotive Aftermarket Business Unit Automotive Service Solutions Plochingen Germany AA-AS/MKC F 026 P /05 Bosch electronic repair service Fair repair: repairs in line with the market value Fast and reliable: most work completed within 48 hours Quality remains priority: Bosch is committed to this as a globally leading original equipment manufacturer Find out more at: