Assessor Assessment Pack
|
|
- Peregrine Morrison
- 5 years ago
- Views:
Transcription
1 Maintain Business Resources BSBADM311
2 Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, Website: Precision Group (Australia) Pty Ltd BSBADM311 Maintain Business Resources Content in the Assessment Pack has been reproduced with kind permission from material produced and owned by the Department of Education, Training and the Arts. Overseas Student Information If you are an overseas student and you have a problem with your school or college that you haven t been able to fix, the Overseas Students Ombudsman might be able to help. The Ombudsman is a free complaint investigation service, available to people on student visas who are studying with private providers. You can read more about what the Ombudsman does, or make a complaint online, by visiting oso.gov.au. Copyright Notice No part of this book may be reproduced in any form or by any means, electronic or mechanical, including photocopying or recording, or by an information retrieval system without written permission from Precision Group (Australia) Pty Ltd. Legal action may be taken against any person who infringes their copyright through unauthorised copying. These terms are subject to the conditions prescribed under the Australian Copyright Act Copying for Educational Purposes The Australian Copyright Act 1968 allows 10% of this book to be copied by any educational institute for educational purposes, provided that the institute (or the body that administers it) has given a remuneration notice to the Copyright Agency Limited (CAL) under the Act. For more information, info@copyright. com.au or visit < for other contact details. Disclaimer Precision Group has made a great effort to ensure that this material is free from error or omissions. However, you should conduct your own enquiries and seek professional advice before relying on any fact, statement or matter contained in this book. Precision Group (Australia) Pty Ltd is not responsible for any injury, loss or damage as a result of material included or omitted from this material. Information in this course material is current at the time of publication. 48
3 Table of Contents Assessor Assessment Pack 51 Assessment Delivery 57 Assessment Assessor Information Steps for Assessors Assessment Agreement Tasks Context Marking Schedule 69 Recording Record of Assessment Unit of Competency and Assessment Requirements 75 BSBADM311 Maintain Business Resources 49
4 50
5 Assessment Delivery 51
6 Assessor Information This Assessor Assessment Pack is designed to assist you in assessing Learners completing the assessment for. It may refer to the simulated business, Bounce Fitness and contains examples of what is in the Learner Assessment Pack, suggestions for assessing and the parameters of information required to provide a Satisfactory or Needs More Evidence decision. Notes, key points, and answers to guide and assist you are contained in this version, but are not in the Learner version. If you prefer to use the business of the Learner, simply substitute that business name. The simulated business, Bounce Fitness, is accessed by going to < precisiongroup.com.au>. You will have been given an access code for each Trainer/ Assessor Pack that you purchased. You will also have received an access code for each Learner Pack that you purchased. Access is valid for 12 months from the date of first log in. If you require access after this time, it may be purchased by going to < Each Learner has a Learner Assessment Pack and that is where it is intended that they will complete their assessment tasks using the simulated business, Bounce Fitness. If you prefer to use the organisation of the Learner or your own business model, simply inform the Learner and request that they replace references to Bounce Fitness with the name of your preferred organisation. Each Assessor Assessment Pack is made up of three parts: Assessment Delivery Assessor Information Steps for Assessors Assessment Agreement Assessment Tasks Context Marking Schedule Recording Record of Assessment Copy of Unit of Competency Copy of Assessment Requirements 52
7 Before you commence assessing, ensure that you have a good knowledge of the subject, the assessment requirements, situation of the Learner, and the expectations of the industry to which the assessing is related. Most assessments are designed to be completed using the simulated business, but your Registered Training Organisation (RTO) may prefer to use the industry of the Learner or their own business model. Learners may be required to demonstrate knowledge and skills which may be difficult for the Assessor to witness. An Evidence Record is supplied which will allow the knowledge or skill to be verified by at least one third party signatory and preferably two or more. These witnesses would usually be current or recent supervisors, or you, the Assessor. As you encounter each task, explanations are made and it is up to you to use your experience and background knowledge of assessing theory to make a judgement as to whether it is sufficient and credible. Remember to be governed by the guidelines of the RTO for whom you are assessing. This organisation will have quality assurance documentation defining standards and processes to which you must adhere. Records must be kept of all aspects of the assessment in the Learner Pack. This will all evidence the why of your judgement. Keeping detailed notes is vital, as is the rationale for judgement. Be sure to keep records of any reasonable adjustments to the Assessment Task/s that you may have applied. The way you record all information is crucial. It is essential that you ask: 1. What did you see or hear? Write it down! 2. How does this vision or information relate to this unit? Write it down!! 3. What professional judgement did you make? Why? Write it down!!! The record of assessment is a legal document and must be signed, dated, and stored as required by your RTO. Please note that while each performance criterion has been noted, holistic assessment is desirable. It is in the interests of accuracy and credibility that all performance criteria are included. Individual gaps in performance are able to be noted more effectively if necessary. 53
8 Steps for Assessors Before you receive the completed Learner Assessment Pack: 1. Carefully study the unit topic, Assessment, and industry. Investigate the simulated business or conduct conversations with employers as appropriate, to understand any processes, policies, or procedures that may be necessary for Learners to know, and to which they may refer. Understand the industry requirements and how any legislative requirements impact on their organisation. You will need this information to properly assess their employees. 2. Explain the conditions of assessment to the Learners and complete the Assessment Agreement. 3. Prepare your Tasks to contextualise the Assessment to meet the needs of the industry for which you are providing the training. You may prefer to print these and include them with this Assessment. In the Assessor Assessment Pack Recording section, note your additional Tasks and mapping under the Context Detail heading, to enable you to record the Learner Assessment results for the contextualised Tasks. Conducting the Assessment: 1. Prior to commencement of the Assessment, Learners will be given their copy of the Learner Assessment Pack and access to the simulated business. They will have discussed with you the Assessment format and have signed the Assessment Agreement. 2. At this stage you will commence assessing any Tasks against the Assessment Marking Schedule supplied. If you are not using the simulated business for assessment, you will need to have obtained information from the employer. Because there is so much diversity, it is impossible for all variations and permutations in legislation, codes, awards, organisational processes, etc. to be included here. Again, it is your judgement that will decide if the response to questions and Tasks is sufficient. Recording Sheets for Tasks have been provided. Please record each Learner s information and outcomes in their Learner Assessment Pack and ensure that you include your justification for your final decision. There must be enough detail to allow anyone who was not involved in the process to understand your judgement. 3. Once Learners have completed and returned their Assessment to you, you will arrange a time with them for the feedback discussion and to advise if there are any further steps for them to take. Learners have the right to appeal any decision. 54
9 Example Only Complete this section in the Learner Assessment Pack for each Learner. Assessment Agreement Have you signed off: Delivery Method Classroom Small Group One-on-One Online Other (please describe) Assessment Method Learner s Organisation Pre-assessment meeting conducted Simulated Business Assessment Conditions Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in the general administration field of work and include access to office equipment and resources. Assessors must satisfy NVR/AQTF assessor requirements. I confirm that the activities and assessment completed as part of this unit are my own work and comply with all relevant copyright and plagiarism rules. I understand that if there is any doubt of the authenticity of any piece of my assessment I can be orally examined and the signatory of evidence records may be contacted. Learner Name Learner Signature Date Assessor Name Assessor Signature Date 55
10 56
11 Assessment 57
12 Tasks Learners are required to complete all tasks as instructed. Consider evidence as required by tasks and use accordingly to contextualise and meet the needs of each Learner. Contextualisation of Assessments by RTOs Precision Group recommends to all RTOs that they contextualise with additional tasks to suit particular industry requirements and specific organisational requirements. Contextualisation must retain the integrity of the assessment and the outcome of the unit of competency. 58
13 Example Only The Learner must complete these tasks on their own paper. To be assessed for this competency, you must demonstrate your ability to: Collect and record data on resource use Observe resource use over defined and operational timeframes Perform routine resource maintenance. The Assessment Tasks must be completed by you to enable you to demonstrate these skills. This assessment must be conducted in your own workplace. You may need to conduct further research. 59
14 Task 1 Theory: Short Answer Questions Task 1 enables you to demonstrate your knowledge. You must answer the following questions relating to your organisation. If there is insufficient space, you must complete on your own paper, numbering each answer and include with the remainder of this assessment pack. a. How do ethical principles impact on your purchasing organisational strategy? b. How does the Work Health and Safety Act impact on your organisational purchasing strategy? c. What Codes of Practice impact on acquisitions in your industry? d. How do the privacy laws impact on your organisational purchasing strategy? e. Describe the policies, plans and procedures that your organisation has for resource acquisition. 60
15 Task 1 Theory: Short Answer Questions (Continued) f. Describe how records are kept and files for acquisitions. Why would this be described as a safe and secure recording practice? Copies of any documents to which you refer must be included for the Assessor. 61
16 Marking Schedule Key Points and Suggested Answers Record what you saw or heard, how it related to the PC, your judgement, and why you made that judgement in the Learner Assessment Pack. Also ensure that you record your feedback. Task 1 Theory: Short Answer Questions To be competent in Task 1, the Learner must accurately answer all questions. The answers must be confirmed as accurate, appropriate, and complete by the supervisor during your discussions and completion of the Evidence Record. a. How do ethical principles impact on your purchasing organisational strategy? Discuss this with the supervisor of the Learner to gauge accuracy. Look also at the detail in Element 3 of the Trainer Manual if further clarification is required. b. How does the Work Health and Safety Act impact on your organisational purchasing strategy? Discuss this with the supervisor of the Learner to gauge accuracy. Look also at the detail in Element 3 of the Trainer Manual if further clarification is required. c. What Codes of Practice impact on acquisitions in your industry? Discuss this with the supervisor of the Learner to gauge accuracy. Look also at the detail in Element 3 of the Trainer Manual if further clarification is required. d. How do the privacy laws impact on your organisational purchasing strategy? Discuss this with the supervisor of the Learner to gauge accuracy. Look also at the detail in Element 3 of the Trainer Manual if further clarification is required. e. Describe the policies, plans and procedures that your organisation has for resource acquisition. Discuss this with the supervisor of the Learner to gauge accuracy. Consider if any documentation that they have included is appropriate and directly related. Does the Learner have a clear understanding of the procedures and are they able to apply them consistently? f. Describe how records are kept and files for acquisitions. Why would this be described as a safe and secure recording practice? Discuss this with the supervisor of the Learner to gauge accuracy. Consider if any documentation that they have included is appropriate and directly related. Does the Learner have a clear understanding of the procedures and are they able to apply them consistently? 65
17 Task 2 Project: Maintain Business Resources To be competent in Task 2, the Learner must complete a project relating to maintaining business resources in their workplace, and prepare a clear and concise report that is focused on the achievement of the organisational requirements. The Learner must have selected an area in their organisation for which resources are required on a regular basis. They must discuss their choice and timeline with you before commencing to ensure that their selections are suitable for the purpose of this assessment. The Learner must address the points below as a guide on their own paper. The report does not have to be lengthy, but they must cover each point with enough information to allow you to make a judgement. Ensure that all points relating to organisational procedure are agreed by the supervisor in your discussion to collect evidence for the Third Party Evidence Record. a. Collect and audit data on the resource use. The Learner must include run sheets or tracking records as evidence. I. The Learner must have provided copies of run sheets or other tracking records produced by the technological source used to keep track of purchases. The processes that they used must agree with the policies and procedures relating to the collection of data included. II. The Learner must have provided a list of at least two and no more than three potential suppliers and discussed the costs and terms of supply for each. The Learner must have provided copies of suppliers quotations or tender documents as appropriate, and the information contained on these must agree with the discussion of the Learner. III. The Learner must discuss how they will manage shortages to minimise the impact on the operations. Their discussion must be practical and cost efficient and approved by the supervisor during your Third Party Evidence Record discussion. IV. The Learner must discuss how they will consult with the team using the resource to ensure that they participate in the decision making regarding the effective use of the resources that they ordered. The Learner must have provided copies of the Minutes of the Meeting which verify the plan and involvement of the team as well as the organisational policies and procedures relating to the use of the resource that they ordered. b. Observe the resource use for a period agreed with their Assessor and provide evidence of the use. Include records that were used in the calculations. I. The Learner must routinely monitor the resource use for the period that they agreed with you and discuss how the figures compared in terms of the resource usage with previous period and what is expected to be used according to the budget. The Learner must have provided copies of all records that they used in their calculations and thee must agree with the discussion by the Learner and be approved by the supervisor during your Third Party Evidence Record discussion. These records must be printed from the business technology that is used to keep track of purchases. 66
18 Task 2 Project: Maintain Business Resources (continued) II. The Learner must discuss if the acquisition and storage of resources was accomplished in the way required by their organisation, was cost effective, and consistent with organisation timelines. The Learner must have provided copies of related organisational policies and the actions described by the Learner must agree with the related policies and procedures and be approved by the supervisor during your Third Party Evidence Record discussion. III. The Learner must reflect on the resource acquisition processes and identify improvements that could be made in future resource acquisitions. These must be logical and useful and approved by the supervisor during your Third Party Evidence Record discussion. If they cannot see any improvements, they must clearly explain why it is so successful and this must be approved by the supervisor during your Third Party Evidence Record discussion. c. Acquire resources as required by their organisation and provide evidence of the policies and procedures that they used to obtain these. Copies of the order, terms and conditions and related organisational policies must be included as evidence. I. The Learner must order the resources and discuss how they have met the organisational requirements and timelines as well as how they took occupational health and safety into account. The Learner must have provided copies of the order and the terms and conditions that their organisation requires to be met. The discussion of the Learner must agree with the occupational health and safety requirements and have met the terms requested of the supplier. It must be approved by the supervisor during your Third Party Evidence Record discussion. The Learner must ensure that their report is clear, concise, and all points are relevant to achievement of organisational requirements. As you will not be able to observe the Learner during the entire assessment, you will need to meet with their supervisor to obtain third party verification and you may need to ask further questions to ensure that the Learner is competent to determine, administer and maintain resources and equipment to complete a variety of tasks. The Learner must exercise discretion and judgement using appropriate theoretical knowledge of business resources and their maintenance to provide technical advice and support to a team. 67
19 Task 3 Evidence Record The Evidence Record must be completed by the Assessor in discussion with the supervisor of the Learner. All areas must be satisfactory for the Learner to be deemed Satisfactory. Example Only Complete this section in the Learner Assessment Pack for each Learner. Tasks Sign-Off Sheet Learner Name Assessor Name Learner Signature Assessor Signature Date Date 68
20 Recording 69
21 Example Only Complete this section in the Learner Assessment Pack for each Learner. Record of Assessment Learner Details Assessor Details Name Name Course Code Site and Date Unit Code BSBADM311 Unit Name Maintain Business Resources Performance Criteria Mapping Assessment Activity PC Mapping Satisfactory Needs More Evidence Task 1 Theory: Short Answer Questions KE 1, 2, 3 Task 2 Project: Maintain Business Resources Task 3 Evidence Record 1.1, 1.2, 1.3, , 2.2, 2.3, 2.4, , 3.2, , 1.2, 1.3, , 2.2, 2.3, 2.4, , 3.2, 3.3 Performance Evidence Mapping Satisfactory Needs More Evidence PE1 Collect and record data on resource use Tasks 2 and 3 PE2 Observe resource use over defined and operational timeframes Tasks 2 and 3 PE3 Perform routine resource maintenance. Tasks 2 and 3 70
22 Knowledge Evidence Mapping Satisfactory Needs More Evidence KE1 KE2 KE3 List the key provisions of relevant legislation Identify the organisational resource acquisition policies, plans and procedures Identify the organisational procedures for record keeping/filing systems, security and safe recording practices. Tasks 1a, b, c, d and 3 Tasks 1e and 3 Tasks 1f and 3 Context Mapping PC Mapping Satisfactory Needs More Evidence 71
23 Foundation Skills Mapping Skill Description ACSF Level Mapping Satisfactory Needs More Evidence Reading Identifies and interprets information from a range of sources, including organisational policies and procedures 3 Tasks 1, 2 and 3 Writing Uses clear and succinct language and appropriate layout to provide information, advice and support materials 3 Tasks 1, 2 and 3 Oral Communication Presents information or advice choosing language appropriate to the context and needs of the audience 3 Tasks 2 and 3 Uses active listening and questioning to confirm understanding 3 Tasks 2 and 3 Selects and uses appropriate tools to aid with estimation and other resource assessment requirements 3 Tasks 2 and 3 Numeracy Uses a combination of mainly informal and some formal written mathematical equations to represent the outcomes of the resource allocation process 3 Tasks 2 and 3 Navigate the world of work Takes some personal responsibility for adherence to organisational procedures and protocols 3 Tasks 2 and 3 Interact with others Uses collaborative techniques to engage personnel in consultations and negotiations 3 Tasks 2 and 3 Plans a range of routine tasks and required resources, accepting goals and aiming to achieve them within allocated timeframes 3 Tasks 2 and 3 Recognises and takes responsibility for addressing predictable problems in familiar work contexts 3 Tasks 2 and 3 Get the work done Follows routine procedures for using digital technology to enter, store and retrieve information directly relevant to role 3 Tasks 2 and 3 Understands the purpose and some specific functions of some common digital tools used in work contexts 3 Tasks 2 and 3 Evaluates effectiveness of decisions in terms of how well they met stated goals 3 Tasks 2 and 3 72
24 (please tick appropriate box) Yes No Comments and future action noted in Learner Assessment Pack Results discussed and agreed to You have the right to appeal the outcome of your assessment. The Learner is Competent Not Yet Competent Learner Comments Assessor Comments Details of further evidence required After reassessment the Learner is Competent Not Yet Competent Assessor Signature Date The signature confirms that I have submitted all my own work and agree with the assessment decision and feedback. Learner Signature Date 73
25 74
26 Unit of Competency and Assessment Requirements BSBADM311 Maintain Business Resources 75
27 Unit of Competency Unit of Competency Modification History Release 1 This version first released with BSB Business Services Training Package Version 1.0. This unit describes the skills and knowledge required to determine, administer and maintain resources and equipment to complete a variety of tasks. Application It applies to individuals who are skilled operators and apply a broad range of competencies in various work contexts. They may exercise discretion and judgement using appropriate theoretical knowledge of business resources and their basic maintenance to provide technical advice and support to a team. No licensing, legislative or certification requirements apply to this unit at the time of publication. Unit Sector Administration General Administration ELEMENTS AND PERFORMANCE CRITERIA Element Elements describe the essential outcomes. Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. 1.1 Calculate estimates of future and present business resource needs in accordance with organisational requirements 1. Advise on resource requirements 1.2 Ensure advice is clear, concise and relevant to achieve organisational requirements 1.3 Provide information on the most economical and effective choice of equipment, materials and suppliers 1.4 Identify resource shortages and possible impact on operations 2.1 Ensure resource handling is in accordance with established organisational requirements including occupational health and safety requirements 2.2 Use business technology to monitor and identify the effective use of resources 2. Monitor resource usage and maintenance 2.3 Use consultation with individuals and teams to facilitate effective decision-making on the appropriate allocation of resources 2.4 Identify and adhere to relevant policies regarding resource use in the performance of operational tasks 2.5 Routinely monitor and compare resource usage with estimated requirements in budget plans 76
28 Unit of Competency ELEMENTS AND PERFORMANCE CRITERIA Element Elements describe the essential outcomes. Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. 3.1 Ensure acquisition and storage of resources is in accordance with organisational requirements, is cost effective, and consistent with organisational timelines 3. Acquire resources 3.2 Acquire resources within available timelines to meet identified requirements 3.3 Review resource acquisition processes to identify improvements in future resource acquisitions FOUNDATION SKILLS This section describes language, literacy, numeracy and employment skills incorporated in the performance criteria that are required for competent performance. Skill Performance Criteria Description Reading 1.1, 1.4, 2.4, 2.5, 3.3 Writing 1.1, 1.3, 2.2, 2.5, 3.3 Identifies and interprets information from a range of sources, including organisational policies and procedures Uses clear and succinct language and appropriate layout to provide information, advice and support materials Oral Communication 1.2, 1.3, 2.3 Presents information or advice choosing language appropriate to the context and needs of the audience Uses active listening and questioning to confirm understanding Numeracy 1.1, 1.3, 1.4, 2.2, 2.4, 2.5, Selects and uses appropriate tools to aid with estimation and other resource assessment requirements Navigate the world of work Interact with others 1.1, 1.2, 2.1, 2.4, 3.1, Uses a combination of mainly informal and some formal written mathematical equations to represent the outcomes of the resource allocation process Takes some personal responsibility for adherence to organisational procedures and protocols Uses collaborative techniques to engage personnel in consultations and negotiations 77
29 Unit of Competency FOUNDATION SKILLS This section describes language, literacy, numeracy and employment skills incorporated in the performance criteria that are required for competent performance. Skill Get the work done Performance Criteria 1.1, 1.3, 1.4, 2.2, 2.5, 3.3 Description Plans a range of routine tasks and required resources, accepting goals and aiming to achieve them within allocated timeframes Recognises and takes responsibility for addressing predictable problems in familiar work contexts Follows routine procedures for using digital technology to enter, store and retrieve information directly relevant to role Understands the purpose and some specific functions of some common digital tools used in work contexts Evaluates effectiveness of decisions in terms of how well they met stated goals UNIT MAPPING INFORMATION Code and title current version Code and title previous version Comments Equivalence status BSBADM311 BSBADM311A Updated to meet Maintain business Maintain business Standards for Training Equivalent unit resources resources Packages LINKS Companion volumes available from the IBSA website: volumes 78
30 Assessment Requirements Assessment Requirements Modification History Release 1 This version first released with BSB Business Services Training Package Version 1.0. PERFORMANCE EVIDENCE Evidence of the ability to: Collect and record data on resource use Observe resource use over defined and operational timeframes Perform routine resource maintenance. Note: If a specific volume or frequency is not stated, then evidence must be provided at least once. KNOWLEDGE EVIDENCE To complete the unit requirements safely and effectively, the individual must: List the key provisions of relevant legislation Identify the organisational resource acquisition policies, plans and procedures Identify the organisational procedures for record keeping/filing systems, security and safe recording practices. ASSESSMENT CONDITIONS Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in the general administration field of work and include access to office equipment and resources. Assessors must satisfy NVR / AQTF assessor requirements. LINKS Companion volumes available from the IBSA website: volumes 79
31 Unit of Competency 80
Assessor Assessment Pack
Contribute to Health and Safety of Self and Others BSBWHS201 Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationAssessor Assessment Pack
Establish Legal and Risk Management Requirements of Small Business BSBSMB401 Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationAssessor Assessment Pack
Manage Human Resources Strategic Planning BSBHRM602 Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au Precision
More informationLearner Assessment Pack
Manage Human Resources Strategic Planning BSBHRM602 Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au Precision
More informationAssessor Assessment Pack
Manage Human Resource Services BSBHRM501 Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au Precision Group (Australia)
More informationTrainer Manual & Assessment
Trainer Manual & Assessment Participate in a Quality Audit BSBAUD402 Simulated Business Access* Instructions New User Access Go to bounce.precisiongroup.com.au Complete all fields under Register An Account
More informationDEVELOP TEAMS AND INDIVIDUALS FACILITATOR MANUAL & ASSESSMENT BSBLED401A
DEVELOP TEAMS AND INDIVIDUALS FACILITATOR MANUAL & ASSESSMENT BSBLED401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationBSBWHS402 Assist with compliance with WHS laws. Recognition of Prior Learning Assessor Guide
BSBWHS402 Assist with compliance with WHS laws Recognition of Prior Learning Assessor Guide Written by Sandy Welton www.trainingresourcesrto.com.au BSBWHS402 Assist with compliance with WHS laws Modification
More informationMANAGE RISK CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBRSK501A
MANAGE RISK CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBRSK501A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationMANAGE PROJECTS CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBPMG510A
MANAGE PROJECTS CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBPMG510A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationPROVIDE LEADERSHIP ACROSS THE ORGANISATION CANDIDATE RESOURCE & ASSESSMENT BSBMGT605B
PROVIDE LEADERSHIP ACROSS THE ORGANISATION CANDIDATE RESOURCE & ASSESSMENT BSBMGT605B Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationDEVELOP A WORKPLACE LEARNING ENVIRONMENT CANDIDATE RESOURCE & ASSESSMENT BSBLED501A
DEVELOP A WORKPLACE LEARNING ENVIRONMENT CANDIDATE RESOURCE & ASSESSMENT BSBLED501A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationMANAGE PEOPLE PERFORMANCE CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMGT502B
MANAGE PEOPLE PERFORMANCE CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMGT502B Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationPLAN OR REVIEW ADMINISTRATION SYSTEMS CANDIDATE RESOURCE & ASSESSMENT BSBADM504B
PLAN OR REVIEW ADMINISTRATION SYSTEMS CANDIDATE RESOURCE & ASSESSMENT BSBADM504B Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationIMPLEMENT WORKPLACE INFORMATION SYSTEM CANDIDATE RESOURCE & ASSESSMENT BSBINM401A
IMPLEMENT WORKPLACE INFORMATION SYSTEM CANDIDATE RESOURCE & ASSESSMENT BSBINM401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationRECOMMEND PRODUCTS AND SERVICES CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBPRO301A
RECOMMEND PRODUCTS AND SERVICES CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBPRO301A Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au
More informationIMPLEMENT CUSTOMER SERVICE STANDARDS CANDIDATE RESOURCE & ASSESSMENT BSBCUS403A
IMPLEMENT CUSTOMER SERVICE STANDARDS CANDIDATE RESOURCE & ASSESSMENT BSBCUS403A Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationDEVELOP WORKPLACE POLICY AND PROCEDURES FOR SUSTAINABILITY CANDIDATE RESOURCE & ASSESSMENT BSBSUS501A
DEVELOP WORKPLACE POLICY AND PROCEDURES FOR SUSTAINABILITY CANDIDATE RESOURCE & ASSESSMENT BSBSUS501A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au
More informationBSBWHS404 Contribute to WHS hazard identification, risk assessment and risk control
BSBWHS404 Contribute to WHS hazard identification, risk assessment and risk control Release: 1 BSBWHS404 Contribute to WHS hazard identification, risk assessment and risk control Modification History Release
More informationMANAGE PERSONAL WORK PRIORITIES AND PROFESSIONAL DEVELOPMENT CANDIDATE RESOURCE & ASSESSMENT BSBWOR501A
MANAGE PERSONAL WORK PRIORITIES AND PROFESSIONAL DEVELOPMENT CANDIDATE RESOURCE & ASSESSMENT BSBWOR501A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au
More informationIMPLEMENT WORKPLACE INFORMATION SYSTEM FACILITATOR MANUAL & ASSESSMENT BSBINM401A
IMPLEMENT WORKPLACE INFORMATION SYSTEM FACILITATOR MANUAL & ASSESSMENT BSBINM401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationUnit of competency and mapping guide
Unit of Competency Code, Title and Release Version Unit of Competency AQF Level: Document Owner: Document Author: Application of Unit: CUASOU301 (release 2) III Spectrum training resources Spectrum training
More informationTrainer Manual & Assessment
Trainer Manual & Assessment Apply Knowledge of WHS Legislation in the Workplace BSBWHS302 Simulated Business Access* Instructions New User Access Go to bounce.precisiongroup.com.au Complete all fields
More informationMANAGE BUSINESS DOCUMENT DESIGN AND DEVELOPMENT CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBADM506B
MANAGE BUSINESS DOCUMENT DESIGN AND DEVELOPMENT CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBADM506B Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au
More informationPROCESS CUSTOMER COMPLAINTS CANDIDATE RESOURCE & ASSESSMENT BSBCMM301A
PROCESS CUSTOMER COMPLAINTS CANDIDATE RESOURCE & ASSESSMENT BSBCMM301A Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationTAEASS403 Participate in assessment validation. TAE Training and Education Training Package. Trainer and Assessor Guide
TAEASS403 Participate in assessment validation TAE Training and Education Training Package Trainer and Assessor Guide Written by Sandy Welton www.trainingresourcesrto.com.au Purpose of this Trainer and
More informationDEVELOP AN ADVERTISING STRATEGY AND BRIEF FACILITATOR MANUAL & ASSESSMENT BSBADV512A
DEVELOP AN ADVERTISING STRATEGY AND BRIEF FACILITATOR MANUAL & ASSESSMENT BSBADV512A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationIDENTIFY RISK AND APPLY RISK MANAGEMENT PROCESSES CANDIDATE RESOURCE & ASSESSMENT BSBRSK401A
IDENTIFY RISK AND APPLY RISK MANAGEMENT PROCESSES CANDIDATE RESOURCE & ASSESSMENT BSBRSK401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationESTABLISH NETWORKS CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBREL401A
ESTABLISH NETWORKS CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBREL401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationRelease: 1. BSBITU304 Produce spreadsheets
Release: 1 BSBITU304 Produce spreadsheets BSBITU304 Produce spreadsheets Modification History Release Release 1 Comments This version first released with BSB Business Services Training Package Version
More informationESTABLISH NETWORKS CANDIDATE RESOURCE & ASSESSMENT BSBREL401A
ESTABLISH NETWORKS CANDIDATE RESOURCE & ASSESSMENT BSBREL401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au BSBREL401A
More informationTAE10 Training and Education Training Package (Release 3.4) TAE Training and Education Training Package (Release 2.0)
supporting the TAE10 Training and Education Training Package (Release 3.4) TAE Training and Education Training Package (Release 2.0) Teacher s Workbook Companion Certificate IV in Training and Assessment
More informationDEVELOP AND IMPLEMENT A BUSINESS PLAN FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMGT617A
DEVELOP AND IMPLEMENT A BUSINESS PLAN FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMGT617A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au
More informationCONTRIBUTE TO EFFECTIVE WORKPLACE RELATIONSHIPS FACILITATOR MANUAL & ASSESSMENT BSBFLM303C
CONTRIBUTE TO EFFECTIVE WORKPLACE RELATIONSHIPS FACILITATOR MANUAL & ASSESSMENT BSBFLM303C Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationMONITOR A SAFE WORKPLACE FACILITATOR MANUAL & ASSESSMENT BSBOHS407A
MONITOR A SAFE WORKPLACE FACILITATOR MANUAL & ASSESSMENT BSBOHS407A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationAbout this guide 5 Section 1: Meeting VET sector requirements How Aspire s resources assist in meeting requirements 7
Contents About this guide 5 Section 1: Meeting VET sector requirements 7 1.1 How Aspire s resources assist in meeting requirements 7 Section 2: Unit of competency information 15 2.1 Unit of competency
More informationUnit of competency and mapping guide
Unit of Competency Code, Title and Release Version Unit of Competency AQF Level: Document Owner: Document Author: Application of Unit: CUALGT301 (release 2) III Spectrum training resources Spectrum training
More informationTAEASS403 Participate in assessment validation. Learning Guide
TAEASS403 Participate in assessment validation Written by Sandy Welton www.trainingresourcesrto.com.au Table of Contents TAEASS403 Participate in assessment validation... 1 Elements of competency... 1
More informationMANAGE SEPARATION OR TERMINATION FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBHRM507A
MANAGE SEPARATION OR TERMINATION FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBHRM507A Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD, 4055 Email: info@precisiongroup.com.au
More informationSupport performance management processes
Support performance management processes This book supports BSBHRM403 Support performance management processes in the Business Services Training Package. Alfred Quay, 2015 Author: Alfred Quay ISBN 978-1-925291-10-0
More informationPlan assessment activities and processes
TAEASS401 Plan assessment activities and processes Learner guide TAASS401 Explore a unit of competency You should unpack a unit of competency and consider each part of the unit to form a picture of what
More informationSAMPLE. Not for training purposes. Assessor Guide. TAEASS502 Design and develop assessment tools. 2 nd Edition 2017
TAEASS502 Design and develop assessment tools 2 nd Edition 2017 Part of a suite of support materials for the TAE Training and Education Training Package Acknowledgement Innovation and Business Industry
More informationMANAGE AN INFORMATION OR KNOWLEDGE MANAGEMENT SYSTEM CANDIDATE RESOURCE & ASSESSMENT BSBINM501A
MANAGE AN INFORMATION OR KNOWLEDGE MANAGEMENT SYSTEM CANDIDATE RESOURCE & ASSESSMENT BSBINM501A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationAbout this guide 5 Section 1: Meeting VET sector requirements How Aspire s resources assist in meeting requirements 7
Contents About this guide 5 Section 1: Meeting VET sector requirements 7 1.1 How Aspire s resources assist in meeting requirements 7 Section 2: Unit of competency information 15 2.1 Unit of competency
More informationAssessment Policy and Procedure. Assessment. Policy Version Details. Version Identifier Last Updated Author Approved By
Assessment Policy Version Details Version Identifier Last Updated Author Approved By v1.0 December 2016 10 December 2016 Training Manager CEO Statutory and regulatory compliance Standards for RTOs 2015
More informationRecognition of Prior Learning and Assessment Kit
Recognition of Prior Learning and Assessment Kit Page 1 of 16 ABOUT THIS KIT This RPL Kit is designed as a self assessment tool to determine whether you are able to provide evidence sufficient for judgements
More informationSUITABLE FOR BSBMGT502. Business Services Training. Manage People Performance BSBMGT502B. Unit of Competency
Business Services Training Unit of Competency Manage People Performance BSBMGT502B Unit Descriptor This unit describes the performance outcomes, skills and knowledge required to manage the performance
More informationENSURE TEAM EFFECTIVENESS CANDIDATE RESOURCE & ASSESSMENT BSBWOR502A
ENSURE TEAM EFFECTIVENESS CANDIDATE RESOURCE & ASSESSMENT BSBWOR502A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationAbout this guide 5 Section 1: Meeting VET sector requirements 7
Contents About this guide 5 Section 1: Meeting VET sector requirements 7 1.1 How Aspire s resources assist in meeting requirements 7 1.2 Resource quality assurance processes 16 Section 2: Unit of competency
More informationSECTION 1 INTRODUCTION... 3 SECTION 2 POLICY... 4 SECTION 3 PROCEDURE... 5
Assessment Policy and Procedure 20160621_v1.0 Policy and Procedure Name: Assessment Policy and Procedure Approved by: Director, Customer Success Date Approved: 21/06/2016 Approved by: Head of Compliance,
More informationRelease: 1. BSBINN601 Lead and manage organisational change
Release: 1 BSBINN601 Lead and manage organisational change BSBINN601 Lead and manage organisational change Modification History Release Release 1 Comments This version first released with BSB Business
More informationPROMOTE TEAM EFFECTIVENESS FACILITATOR MANUAL & ASSESSMENT BSBWOR402A
PROMOTE TEAM EFFECTIVENESS FACILITATOR MANUAL & ASSESSMENT BSBWOR402A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationBSBPMG516 Manage project information and communication
BSBPMG516 Manage project information and communication Release: 1 BSBPMG516 Manage project information and communication Modification History Release Release 1 Comments This version first released with
More informationThis assessment resource supports the unit of competency MSAPMOHS200A Work safely
This assessment resource supports the unit of competency MSAPMOHS200A Work safely e Free for Education Copying www.mskills.com.au The views expressed in the copyright work do not necessarily represent
More informationSUITABLE FOR FNSBKG401. Financial Services Training
Financial Services Training Unit of Competency FNSBKG401A FNSBKG401ADevelop and implement policies and procedures relevant to bookkeeping activities Unit Descriptor This unit describes the performance
More informationDEVELOP AND IMPLEMENT STRATEGIC PLANS FACILITATOR MANUAL & ASSESSMENT BSBMGT616A
DEVELOP AND IMPLEMENT STRATEGIC PLANS FACILITATOR MANUAL & ASSESSMENT BSBMGT616A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationSection 2: Unit of competency information
Section 2: Unit of competency information 2.1 Unit of competency TAEASS402 Assess competence Modification history Release Comments Release 1 This version first released with TAE Training and Education
More informationCOORDINATE IMPLEMENTATION OF CUSTOMER SERVICE STRATEGIES FACILITATOR MANUAL & ASSESSMENT BSBCUS401A
COORDINATE IMPLEMENTATION OF CUSTOMER SERVICE STRATEGIES FACILITATOR MANUAL & ASSESSMENT BSBCUS401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au
More informationGuide to developing assessment tools
Guide to developing assessment tools Table of Contents Introduction 2 What is meant by assessment? 2 Developing assessment tools 3 Step 1 Planning 3 Types of assessment methods 5 Step 2 Design and Development
More informationTRAINING AND ASSESSMENT POLICY AND PROCEDURE
TRAINING AND ASSESSMENT POLICY AND PROCEDURE Table of Contents 1. Overview of the Training and assessment policy 3 2. Training and assessment strategies and tools 5 3. Training and assessment procedure
More informationLEARNING. Recognition of Prior Learning Policy and Procedure
LEARNING Recognition of Prior Learning Policy and Procedure The Association of Superannuation Funds of Australia Limited (ASFA) PO Box 1485, Sydney NSW 2001 T +61 2 9264 9300 or 1800 812 798 (outside Sydney)
More informationDEVELOP A MARKETING PLAN FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMKG609A
DEVELOP A MARKETING PLAN FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMKG609A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationStudent RPL/RCC Information Kit
Student RPL/RCC Information Kit RPL/RCC Student Information Kit Confidentiality Statement The information contained in this document is confidential and is distributed by NHA Australia for the purpose
More informationAssessment Task Workbook
BSBWHS404 Contribute to WHS hazard identification, risk assessment and risk control Assessment Task Workbook Candidate Name: Student No Written by Sandy Welton www.trainingresourcesrto.com.au Instructions
More informationIMPLEMENT CONTINUOUS IMPROVEMENT CANDIDATE RESOURCE & ASSESSMENT BSBMGT403A
IMPLEMENT CONTINUOUS IMPROVEMENT CANDIDATE RESOURCE & ASSESSMENT BSBMGT403A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
More informationIMPLEMENT OPERATIONAL PLAN CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMGT402A
IMPLEMENT OPERATIONAL PLAN CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBMGT402A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au
More informationDEVELOP WORK PRIORITIES CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBWOR404A
DEVELOP WORK PRIORITIES CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBWOR404A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationBSBPMG521 Manage project integration
BSBPMG521 Manage project integration Release: 1 BSBPMG521 Manage project integration Modification History Release Release 1 Comments This version first released with BSB Business Services Training Package
More informationAbout this guide 1. Section 1: Unit of competency 3
Contents About this guide 1 Section 1: Unit of competency 3 1.1 Elements of competency and performance criteria 4 1.2 Range statement 6 1.3 Required skills and knowledge 9 1.4 Evidence guide 11 1.5 Employability
More informationSample Only Property of Cengage
S op a m er p ty le of O C nly en ga ge PREMIUM ASSESSMENT PACK BSB42015 CERTIFICATE IV IN LEADERSHIP AND MANAGEMENT BSB51915 DIPLOMA OF LEADERSHIP AND MANAGEMENT Pr Kris Cole s Management Theory & Practice
More informationBSB41415 Certificate IV in Work Health and Safety. Safety Culture and Compliance. V1.1 Produced 24 February 2016
BSB41415 Certificate IV in Work Health and Safety Safety Culture and Compliance V1.1 Produced 24 February 2016 Copyright 2016 Compliant Learning Resources. All rights reserved. No part of this publication
More informationINNOVATION MATURITY TEMPLATE
INNOVATION MATURITY TEMPLATE Catalyst Exchange Pty Ltd ABN 82 155 378 448 Suite 402, 12 Century Circuit, Norwest Business Park, Baulkham Hills, NSW 2153, Australia T +61 2 9114 8605 E info@catalystexchange.com.au
More informationSVQs: a guide for employers
SVQs: a guide for employers For an up-to-date list of prices visit the Publication Sales and Downloads section of SQA s website. This document can be produced, on request, in alternative formats, including
More informationASSESSMENT VALIDATION AND MODERATION. Assessment Validation and Moderation
ASSESSMENT VALIDATION AND MODERATION Macquarie Commercial College ( MCC ) Page 2 of 7 Policy 1.0 Policy To ensure that all assessment and marking are valid, accurate fair and flexible. MCC will conduct
More informationRelease: 1. CPPSE C3026A Work effectively in investigative services
Release: 1 CPPSE C3026A Work effectively in investigative services CPPSE C3026A Work effectively in investigative services Modification History Not Applicable Unit Descriptor Unit descriptor This unit
More informationBIIAB Internal Quality Assurer Qualifications Handbook
Qualification Handbook BIIAB Internal Quality Assurer BIIAB Level 4 Award in Understanding the Internal Quality Assurance of Assessment Processes and Practice 601/5102/X BIIAB Level 4 Award in the Internal
More informationCHC32015 Certificate III in Community Services. CHC30112 Certificate III in Community Services Work. Transition RPL Kit
CHC32015 Certificate III in Community Services CHC30112 Certificate III in Community Services Work Transition RPL Kit Modification History Version Date Changes 1 03/2016 This resource has been developed
More informationthe maintenance of a successful balance between customer needs and the needs of the organisation
Unit Title: OCR unit number 195 Level: 1 Credit value: 6 Guided learning hours: 50 Unit reference number: Customer care in ICT T/500/7157 Candidates undertaking this unit must complete real work activities
More informationMSAPMPER300C Issue work permits
MSAPMPER300C Issue work permits This competency unit addresses the need for personnel who issue work permits to understand the permit system, know the limitations of each permit and make decisions regarding
More informationASSESSMENT VALIDATION AND MODERATION
ASSESSMENT VALIDATION AND MODERATION Macquarie Commercial College ( MCC ) Page 2 of 11 Policy 1.0 Policy To ensure that all assessment and marking are valid, accurate fair and flexible. MCC will conduct
More informationAssessing Retail Skills
The Further Education and Training Awards Council (FETAC) was set up as a statutory body on 11 June 2001 by the Minister for Education and Science. Under the Qualifications (Education & Training) Act,
More informationRecognition of Prior Learning (RPL) Information Guide & Application
Recognition of Prior Learning (RPL) Information Guide & Application This information guide is designed to assist you through the recognition of prior learning and workplace assessment process. VERSION
More informationDEVELOP A MEDIA PLAN FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBADV507B
DEVELOP A MEDIA PLAN FACILITATOR MANUAL WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBADV507B Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website:
More informationSAMPLE. FNSACC301 Process financial transactions and extract interim reports
FNSACC301 Process financial transactions and extract interim reports 1 st Edition 2017 Part of a suite of support materials for the FNS Financial Services Training Package Acknowledgement Innovation and
More informationBSB30415 CERTIFICATE III IN BUSINESS ADMINISTRATION
BSB30415 CERTIFICATE III IN BUSINESS ADMINISTRATION This qualification reflects the role of individuals who apply a broad range of administrative competencies in varied work contexts, using some discretion
More informationAbout this guide 5 Section 1: Meeting VET sector requirements 7
Contents About this guide 5 Section 1: Meeting VET sector 7 1.1 How Aspire s resources assist in meeting 7 1.2 Resource quality assurance processes 16 Section 2: Unit of competency information 17 2.1 Unit
More informationRECRUIT, SELECT AND INDUCT STAFF CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBHRM402A
RECRUIT, SELECT AND INDUCT STAFF CANDIDATE RESOURCE WITH SIMULATED ONLINE BUSINESS ASSESSMENT BSBHRM402A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au
More informationAssessor. skill set. skill set. learner guide
Assessor TAEASS401B Plan assessment activities and processes TAEASS402B Assess competence TAEASS403B Participate in assessment validation skill set skill set learner guide Shea Business Consulting supporting
More informationUser Guide. Information that supports integration of smallprint training and assessment resources into RTO Training and Assessment Strategies
User Guide Information that supports integration of smallprint training and assessment resources into RTO Training and Assessment Strategies smallprint Australia Pty Ltd ABN 11 568 957 882 5/938 South
More informationNational 4 Sport and Recreation: Skills for Work Course Specification
National 4 Sport and Recreation: Skills for Work Course Specification Valid from August 2013 This edition: August 2013, version 2.0 This specification may be reproduced in whole or in part for educational
More informationAudit report VET Quality Framework Continuing registration as a national VET regulator (NVR) registered training organisation
Audit report VET Quality Framework Continuing registration as a national VET regulator (NVR) registered training organisation ORGANISATION DETAILS Organisation s legal name Trading name/s MinRes Training
More informationHigher National Graded Unit specification General information for centres Graded Unit title: Graded Unit code Type of Graded Unit
Higher National Graded Unit specification General information for centres This Graded Unit has been validated as part of the HNC/HND Community Arts. Centres are required to develop the assessment instrument
More informationRPL Information Booklet. RPL Information Booklet V2 June 18 1
RPL Information Booklet RPL Information Booklet V2 June 18 1 Recognition of Prior Learning (RPL) RPL is an assessment process that assesses an individual s current skills and knowledge, regardless of how
More informationBIIAB Level 1 Award in Retail Knowledge. BIIAB Level 1 Certificate in Retail Knowledge
Qualification Handbook BIIAB Level 1 Award in Retail Knowledge QN 601/6589/3 QW C00/0810/0 BIIAB Level 1 Certificate in Retail Knowledge QN 601/6588/1 QW C00/0881/2 Version 3 Version 3 BIIAB January 2018
More informationBusiness Services Training
Business Services Training Unit of Competency Organise Business Travel BSBADM406B Unit Descriptor This unit describes the performance outcomes, skills and knowledge required to organise domestic and overseas
More informationHandbook. Level 1 Award in Retail Knowledge (QCF) RKA01
Skillsfirst Awards Handbook Level 1 Award in Retail Knowledge (QCF) RKA01 Suite 215 Fort Dunlop Fort Parkway Birmingham B24 9FD www.skillsfirst.co.uk Contents Page Section 1 Introduction 2 Section 2 Skillsfirst
More informationCentre guide for Learning and Development Awards
Centre guide for Learning and Development Awards Centre guide (7318 and 7319) Guidance for Assessors and Internal Verifiers www.city-and-guilds.co.uk November 2004 Publications and enquiries City & Guilds
More informationAbout this guide 5 Section 1: Meeting VET sector requirements 7
Contents About this guide 5 Section 1: Meeting VET sector requirements 7 1.1 How Aspire s resources assist in meeting requirements 7 1.2 Resource quality assurance processes 16 Section 2: Unit of competency
More information