Floating RhinoDock: Owner s Manual

Transcription

1 Floating RhinoDock: Owner s Manual 5 x 10 RhinoDock (shown) CAUTION PUT SAFETY FIRST 1. Before attempting to install or use this dock, study and fully understand the proper operating procedures and safety precautions outlined in this owner s manual. 2. Use caution when handling gasoline; plastic creates static electricity. 3. Never jump or dive into the water before the entire subsurface area has been checked for depth. 4. Do not run on the dock; the dock may have uneven surfaces and may be slippery when wet. 5. Check bolts periodically to ensure hardware and connectors remain securely fastened. 6. NOT COMPLYING WITH THE PROCUDERES AND PRECAUTIONS OUTLINED IN THIS MANUAL WILL INVALIDATE THE WARRANTY AND MAY RESULT IN PERSONAL INJURY OR DEATH. 7. If you have any questions about assembly, installation, use or suitability of this product, contact an authorized dealer. 1

2 Table of Contents Floating RhinoDock Parts 3 Floating RhinoDock Layouts & Locations 4 Assembly Instructions 5-7 Anchoring 8-11 Attaching 8 Cleat 12 Maintenance 12 Warranty

3 Floating RhinoDock Parts Check that all components are present before you begin assembly. Do not assemble, use or install this product if items are missing or damaged. Note: Components dependant upon dock configuration ordered. Floating RhinoDock and Parts: ITEM QTY PART NUMBER DESCRIPTION RhinoDock 4' x 10' RhinoDock 3' x 10' RhinoDock 4' x 6' RhinoDock 6' x 8' RhinoDock 5' x 10' RhinoDock 4' Corner with Connectors RhinoDock Pipe Bracket Large RhinoDock Pipe Bracket Light Duty Floating RhinoDock 16 tall Connector Rod RhinoDock Connectors: ITEM QTY PART NUMBER DESCRIPTION ' Rhinoport Side Rear Connector ' RhinoDock Notched Connector ' RhinoDock Connector ' RhinoDock Connector ' RhinoDock Notched Connector ' RhinoDock Connector ' RhinoDock Notched Connector ' RhinoDock Connector ' RhinoDock Connector ' RhinoDock Notched Connector ' RhinoDock Connector ' Poly Pipe Bracket / RhinoPort Side Connector ' RhinoPort Front Connector Note: Notched connectors are used to make larger platforms, notched portion will fill void created when making platforms. 3

4 Floating RhinoDock Layouts and Locations Consult local authorities for ordinances regarding proper placement and anchoring of your dock. The most stable floating dock configurations have a T or L layout or fingers jutting from the sides. Straight floating docks under 6 wide are generally not stable. The Shoreline Floating RhinoDock is designed to be assembled in virtually any configuration you can imagine and to be easily reconfigured as your needs change. The following are common dock configurations: Floating docks are most suitable for small lakes and protected bays only. If your beach area is routinely exposed to boat wakes or large waves, a floating dock may not be the most appropriate dock for your situation. In addition, the dock should be removed during the winter to prevent damage from ice movement. Do not let your dock get submerged in the water; submerging can cause the dock to be filled with water through the vent cap. Snow load can cause the dock to submerge so remove snow from the dock and remove ramp panels to reduce the chance of submergence. When assembling your dock position dock sections so that the vent cap is facing away from the wave action (if possible) to reduce the chance of water getting into the dock through the vent. Shoreline s warranty will not cover damage resulting from the inappropriate location or installation of a floating dock. If your site is questionable, ask your dealer about a Shoreline standing dock. 4

5 Assembly Instructions Your safety is the most important issue related to this product. Fully read and understand each step before proceeding with that step. Wear protective gloves, clothing and eyewear when assembling and installing the dock. Do not assemble, install or use this product if items are missing or damaged. Shoreline recommends initial assembly and installation by trained personnel or an authorized Shoreline dealer. Contact your dealer for more information. Assembly Tip: It is easiest to connect the float sections on the water. Wait for a calm period with minimal waves. Work in an area where you can stand in the water while connecting the float sections. Plan your work so that you can connect the sections that will be furthest from shore first. As those sections are connected, push them out and connect additional sections. The last sections connected should be those that will remain nearest to shore. If you are unable to connect the docks in the water, find flat area with plenty of room. The docks may be later pushed into position. Two people will be needed to assemble the dock. The following tools will be needed for assembling the dock. Two 9/16 wrenches Two 1/2 wrenches Phillips & Slotted screw drivers Cordless drill or impact wrench Torque wrench 5

6 Step # 1: Assemble Connectors Prior to beginning the connection of the dock sections, assemble the dock connectors. Insert poly dock connector rods into poly dock bottom connector (with 3/4" diameter holes), secure connector rod with #12 x 1" oval screw (as shown). Insert 5/16 x 4-1/2 hex bolt through connector washer, lock washer and the top poly dock connector and thread into connector rod about 1/4". Note: Do not cross-thread. 6

7 Step # 2: Connect Sections Together Place the connector loosely on the ridge of one of the dock sections at the intended point of connection. Bring a second dock section to the point of connection. Holding the dock connector push down on the 5/16 bolt head so the bottom of the connector is held down, this will make it easier to connect the dock. Next push the second dock section down so it will go under the connector and slide it into position. The connector should fit over dock ridges on the top and bottom after you have made sure of this you can tighten the bolts from the top to about 15 ft/lbs. If you are having trouble getting the bottom of the connector to slide in you can add weight or have someone stand on the end of the dock away from the connector, this will bring the bottom portions of the docks together so the connector should slide into position. Make sure vertical channels on docks line up and the tubes on the connectors will sit inside the channels as shown below. Note: Do not over tighten bolts. The rectangular connector washer should not be forced up at the ends nor should it be embedded in the plastic. Side View Top View Side-to-Side Connection End-to-End Connection Note: Check all connecting bolts two days after installation to ensure they remain securely fastened. Re-check connecting bolts periodically. 7

8 Step # 3: Anchoring Your dock may be anchored with pile guides, pile hoops, chains or stiff-arms. The appropriate anchoring will depend on your site. Shoreline recommends initial installation by trained personnel with experience in your area. Contact your authorized Shoreline dealer for more information. Anchoring with Pile Guides Shoreline s pile guides are designed to easily accept poles from 2 to 4-1/2 in diameter. The appropriate diameter, quantity and sunken depth of pole will depend on your weather conditions and water depth. Poles may be constructed from a variety of materials, including galvanized steel, wood and concrete. Oftentimes, when galvanized steel piping is used, a PVC covering will be placed over the top to improve the appearance. Most poles for residential applications may be sunk by hand using a sledge hammer. Auger tips for the pipe are also available to auger the pipe into the lake bottom. The wear plate will come standard with a 2-7/8 opening for 2-3/8 outside diameter pipe. The opening may be cut to any size up to 5 in diameter (to accommodate a pole up to 4-1/2 outside diameter). The wear plate should be replaced prior to allowing the pole to rub against the pile guide. 8

9 Anchoring with Pile Hoops Pile hoops can be used when RhinoDock needs to be attached to existing or new pilings. The pile hoops are made to accommodate pilings in sizes of 8, 10 and 12 diameters. Anchoring with Chains Shoreline s floating RhinoDock may also be anchored with chain connected to a weight or anchor. The chain should be at a 4:1 slope. Example: If you are in 10 of water each chain should be 40 long. 9

10 Typical system anchored with chain. The chain guides are connected in the same manner as shown for anchoring with poles. However, a chain guide is inserted in the opening of the pile guide. A light duty chain anchor is also available for smaller installations and calmer water conditions. The chains may be adjusted from on the dock as the water rises or lowers. 10

11 Anchoring with Stiff-Arms Stiff-Arms can be used when you have a dock that you want parallel to shore and you can t use pile guides or chain. The stiff-arms attach to posts or anchors on shore and use cables to add strength. 11

12 Step # 4 Add Accessories Most accessories come with their own instructions, refer to those instructions for installation. 8 Cleat Note: Do not over-tighten flat head machine screws. Attach cleat to poly dock using two 3/8 x 2-1/2 flat head machine screws. Insert 3/8 x 2-1/2 flat head machine screw through cleat and into the inserts in the RhinoDock. Do not over tighten. Maintenance Inspect connections monthly and tighten or replace as necessary. The deck surface may be washed using soap and water. Do not use a high water pressure washer on the dock. The deck may become somewhat wavy as a result of the expansion of the plastic in the heat of the sun. This will not negatively affect the strength of the dock. The dock should be removed in the winter. Moving ice may cause severe damage to the dock. The dock should not be dragged over rough surfaces. 12

13 SHORELINE LIMITED WARRANTY Product Warranty Period Labor Provided Period Shoreline Brand Dock Shoreline Brand Boat Lifts Sidewinder and Lift Mate Power Unit Rip Raft and Rip Raft Rock Chairs Umbrella Vinyl Canopy Covers (p) RhinoDock / RhinoPort Slide Items Not Listed Replacement Parts 2 Year warranty on aluminum frame 2 Year warranty on aluminum frame 2 Year warranty 2 Year warranty on polyethylene structure 2 Year warranty 2 Year warranty 5 Year pro-rated warranty 8 Year warranty on polyethylene structure 1 Year warranty 1 Year warranty 90 Day warranty 3 years on polyethylene structure Commercial** Parts Warranty Period Labor Provided Period RhinoDock / RhinoPort 8 Year warranty on polyethylene structure 3 years on polyethylene structure * Residential Use means use exclusively by an individual private consumer and only for the consumer s personal, family or household purposes. ** Commercial Use means use of the product for any non-residential purposes, including, but not limited to, use for commercial gain. In the event that the product is used for a mixed Residential Use and Commercial Use, the limited warranty for Commercial Use shall apply. (p) Products that are noted with a (p) are Prorated. Prorated means that Shoreline will provide a Credit, as defined herein, toward your purchase of a replacement product or part. Credit = ([months remaining in the Parts Warranty Period]/[number of months originally in the Parts Warranty Period (e.g. 1 Year warranty = 12 months)]) x [current list price of product or part covered by this Limited Warranty]. Shoreline, Ind. ( Shoreline ) warrants to the original Purchaser that its products and parts are free from defects in materials and workmanship as stated in this Limited Warranty during the Parts Warranty Period as identified herein. The Parts Warranty Period begins on the date of purchase as shown on its receipt or invoice. This Limited Warranty is not transferrable or assignable. If you discover within the Parts Warranty Period a defect in material or workmanship, you must promptly notify your local Shoreline dealer or distributor of any claim under this Limited Warranty. Any claim must be in writing with proof of purchase and provided to your local Shoreline dealer or distributor within fifteen (15) days of the discovery of the defect. This Limited Warranty is for repair or replacement of parts or products only. Except for the period of time identified in the product s or part s corresponding Labor Provided Period, which begins when the Parts Warranty Period commences, this Limited Warranty does not include labor or costs associated with installation or on-site work. Shoreline will provide freight from Shoreline s facility to the local Shoreline dealer or distributor on the next truck or container that is sent to the local Shoreline dealer or distributor during the normal course of business. You are responsible for freight or shipping costs and expenses from the local Shoreline dealer or distributor to the product s location. If you request expedited freight or shipping, you are solely responsible for all related costs. AFTER RECEIVING NOTIFICATION OF THE DEFECT, SHORELINE WILL, AT ITS DISCRETION, REPAIR, REPLACE OR, IF SHORELINE DETERMINES IN ITS SOLE DISCRETION THAT REPAIR OR REPLACEMENT IS NOT FEASIBLE, REFUND THE PURCHASE PRICE ON THE PRODUCT OR PART FOUND ON EXAMINATION BY SHORELINE TO BE DEFECTIVE UNDER NORMAL USE AND SERVICE. THIS LIMITED WARRANTY IS YOUR EXCLUSIVE WARRANTY AND REPLACES ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR U:\Warranty\Warranty Documents REV13

14 A PARTICULAR PURPOSE. Some states, provinces or jurisdictions do not allow the exclusion of express or implied warranties, so the above exclusion may not apply to you. In that event, such warranties apply only to the extent required by law and are limited in duration to five (5) years. No warranties apply after that period. Some states, provinces or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above duration may not apply to you. IN ORDER TO ALLOW SHORELINE AN OPPORTUNITY TO ASSESS THE CONDITION OF THE PART OR PRODUCT FOR WHICH A WARRANTY CLAIM IS MADE, YOU SHALL PROVIDE REASONABLE ACCESS TO THE PART OR PRODUCT TO SHORELINE AND/OR ITS AGENTS, WHICH INCLUDES SHORELINE DEALERS OR DISTRIBUTORS. TO FACILITATE THE PROMPT ASSESSMENT OF YOUR WARRANTY CLAIM, SHORELINE MAY, FROM TIME TO TIME, REQUIRE THAT YOU PROVIDE ADDITIONAL DOCUMENTATION, PHOTOGRAPHS AND OTHER INFORMATION. FAILURE TO PROVIDE THE FOREGOING WITHIN A REASONABLE TIME FROM THE DATE OF REQUEST BY SHORELINE WILL INVALIDATE YOUR LIMITED WARRANTY. Routine maintenance and checking for loose connections or damaged parts must be performed on a monthly basis. Shoreline shall not warranty and cover damage caused by circumstances outside the reasonable control of Shoreline, including but not limited to, improper use, misuse, abuse, improper installation, overloading, accident, neglect or harmful alteration or repairs made by others, damage by snow or ice, electrolysis, corrosion, natural expansion or contraction of parts or products caused by weather conditions, severe weather conditions, terrorism or acts of God. IF YOU ATTEMPT TO REPAIR OR REPLACE PARTS OR PRODUCTS WITHOUT THE AUTHORIZED WRITTEN CONSENT OF SHORELINE OR USE ANY UNAUTHORIZED METHODOLOGY OF REPAIR OR IF YOU ALTER, MODIFY OR CHANGE THE PARTS OR PRODUCTS YOU WILL VOID THIS LIMITED WARRANTY. When the Limited Warranty service involves the replacement of a product or part, the replaced product or part becomes Shoreline s property and the replacement product or part becomes your property. The replacement product or part may not be new but will be in good working order and at least functionally equivalent to the original product or part. At Shoreline s request you are responsible for returning the replaced product or part to the local Shoreline dealer or distributor. The replacement product or part shall be warranted for the balance of the Parts Warranty Period remaining on the original product or part. IN NO EVENT SHALL SHORELINE, ITS SUBSIDIARIES, PARENT, SUPPLIERS, DEALERS, DISTRIBUTORS, RESELLERS OR SERVICE PROVIDERS BE LIABLE FOR: (i) THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES; OR (ii) SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, BUSINESS REVENUE, GOODWILL OR ANTICIPATED SAVINGS. THESE EXCLUSIONS APPLY EVEN IF SHORELINE HAS BEEN ADVISED OF THE POSSIBILITY OF THESE DAMAGES AND EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. AS SOME STATES, PROVINCES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. SUBJECT TO THIS PARAGRAPH, ANY CLAIM FOR DAMAGES FOR BREACH OF WARRANTY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. NOTHING IN THIS LIMITED WARRANTY AFFECTS STATUTORY RIGHTS THAT CANNOT BE WAIVED OR LIMITED BY THIS LIMITED WARRANTY. U:\Warranty\Warranty Documents REV13

15 Warranty Registration 1. Owner Information Thank you for choosing to register your ShoreMaster Product. Note: This information is for our internal research and marketing purposes only. Your personal information will not be sold or solicited to any third party. The status of warranty registration does not affect your warranty. * 1. DATE OF PURCHASE * 2. OWNER INFORMATION First Name: Last Name: Permanent Mailing Address: City: State/Province: Zip/Postal Code: Install Address: Install City: Install Lake: Install State/Province: Install Zip/Postal Code: * 3. ADDRESS * 4. DEALERSHIP INFORMATION Name of Dealer: City: State/Province: 2. Product Information 1. REGISTER SHOREMASTER DOCKS Model Quantity ShoreMaster Docks 6 6 Page 1

16 Warranty Registration 2. SHOREMASTER PWC BOATLIFT Quantity 1150# PWC POLY ShorePort 1150# PWC POLY RhinoPort 1000# PWC DOCK SHUTTLE 1000# PWC 1055 Cantilever # PWC 1264 Vertical 6 3. SHOREMASTER VERTICAL BOATLIFT Model Quantity ShoreMaster Vertical Boatlift SHOREMASTER CANTILEVER BOATLIFT Model Quantity ShoreMaster Cantilever Boatlift SHOREMASTER HYDRAULIC BOATLIFT Model Quantity ShoreMaster Hydraulic Lift FLOATING BOATLIFT Model Quantity Galva Lift ACCESSORIES/COMMENTS 1. PLEASE ENTER HERE ANY ACCESSORIES YOU WISH TO REGISTER Quantity Accessory 1 (Example: Canopy Frame and Cover) 6 Description Page 2

17 Warranty Registration 2. PLEASE ENTER HERE ANY ACCESSORIES YOU WISH TO REGISTER Quantity Accessory 2 (Example: HydroBike) 6 Description 3. PLEASE ENTER ANY COMMENTS YOU HAVE. ALL FEEDBACK IS APPRECIATED 5 4. WOULD YOU LIKE TO RECEIVE A SHOREMASTER NEW PRODUCT CATALOG OR INFORMATION ON UPCOMING PROMOTIONS? 6 nmlkj nmlkj Yes No Page 3