BID REFERENCE : APF/MM/GP/AMGP/263/ DATE OF COMMENCEMENT OF BIDDING DOCUMENT : 28/04/2012

Transcription

1 ANDHRA PRADESH FOODS (A Government of Andhra Pradesh Enterprise) An ISO 22000:2005 Certified Company ROAD No.14, IDA, NACHARAM HYDERABAD, (A.P) INDIA Website: Telephone: /08/09 Fax: COMPETITIVE RE-BID FOR THE DESIGN, SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF BULK SILOS, SAND ROASTERS, AUTOMATIC FO FIRED BURNER, CASCADE TYPE COOLERS, VIBRATORY/ GYRATORY SCREENS, AIR COMPRESSORS, BOILER & FURNACE OIL TANK FOR READY-TO-EAT AND READY- TO-COOK FOOD MIXES BID REFERENCE : APF/MM/GP/AMGP/263/ DATE OF COMMENCEMENT OF BIDDING DOCUMENT : 28/04/2012 LAST DATE AND TIME FOR RECEIPT OF BIDS : 10/05/2012/ 13:00 HRS IST TIME AND DATE OF OPENING OF COVER-1(Technical bid) OF BID : 10/05/2012 / 14:30 HRS IST TIME AND DATE OF OPENING : At the earliest under due intimation to the OF Cover 2 (Financial bid) of BID: shortlisted Bidders PLACE OF OPENING OF BIDS : CONFERENCE HALL ANDHRA PRADESH FOODS, ROAD No. 14, IDA, NACHARAM HYDERABAD ANDHRA PRADESH, INDIA ADDRESS FOR COMMUNICATION : THE MANAGING DIRECTOR, ANDHRA PRADESH FOODS, ROAD No. 14, IDA, NACHARAM, HYDERABAD ANDHRA PRADESH, INDIA 1

2 CONTENTS Section Content Page No I Invitation for Bids 3 II Instructions to Bidders 6 III Conditions of Contract 18 IV Schedule of Requirements 31 V Technical Description 34 VI Qualification Criteria 42 VII Bid Form and Price Schedule 43 VIII Agreement of Contract 47 IX Performance Statement 50 X Manufacturers Authorization Form 52 XI Bank Guarantee for Advance Payment 53 XII Proforma for Equipment and Quality Control Employed by the Manufacturer 54 XIII Acceptance Certificate Form 55 XIV List of clientele 58 XV Technical data 59 XVI Check list of documents to be submitted with technical bid (Cover-1) 60 2

3 SECTION I: INVITATION FOR BIDS (IFB) 3

4 COMPETITIVE RE-BIDDING FOR THE DESIGN, SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF BULK SILOS, SAND ROASTERS, AUTOMATIC FO FIRED BURNER, CASCADE TYPE COOLERS, VIBRATORY/ GYRATORY SCREENS, AIR COMPRESSORS, BOILER & FURNACE OIL TANK FOR READY-TO-COOK FOOD MIXES SECTION I. INVITATION FOR BIDS (IFB) Date : 28/04/ The Andhra Pradesh Foods (a Government of Andhra Pradesh Enterprise) requires machinery and equipment for expansion, upgradation and automation towards production of Ready-to -Eat and Ready -to - Cook Food Mixes being currently supplied to beneficiary children, expectant and lactating mothers in the Integrated Child Development Services Scheme (ICDS) Projects in the State of Andhra Pradesh. The major ingredients of the food mixes being supplied are roasted wheat flour and full fat soy flour. AP Foods has already placed orders for main machinery components like Pre-Cleaning, Cleaning, Grinding and Blending sections. 2. The Managing Director, Andhra Pradesh Foods, Nacharam, Hyderabad (Purchaser) now invites sealed competitive bids from eligible bidders for Design, supply, installation, testing & commissioning of machinery listed below: S. Description of Schedule Quantity Bid Security No (EMD) 1 Bulk Silos to store wheat of capacity 5000 MT each 2 Nos INR 2,00,000/- 2 Sand Roasters for wheat and Soya of capacity 2 MT/Hr each 8 Nos INR 1,00,000/- With accessories 3 Automatic furnace oil fired Burner for 2 MT/Hr capacity 9 Nos INR 15,000/- roasters with accessories. 4 Cascade type coolers to cool 10 MT/Hr Wheat 1 Set INR 40, 000/- 5 Cascade type coolers to cool 5 MT/Hr soya. 1 Set INR 20,000/- 6 Vibratory/Gyratory Screens suitable for 10 MT/Hr wheat 1 Set INR 20,000/- Out put from coolers. 7 Vibratory/Gyratory Screens suitable for& 5 MT/Hr Soya output 1 Set INR 10,000/- from coolers. 8 a. Vertical Screw Compressor of capacity 100 CFM b. Vertical Screw Compressor of capacity 150 CFM 3 Nos 2 Nos INR 15,000/- INR 15,000/- 9 Boiler with 5TPH capacity & 12 to 15 Kg/Cm2 Pressure with 1 Set INR 50,000/- Accessories. 10 Furnace oil tank of capacity 150 KL along with service tanks of 5 kl -1 no and 2.5 KL-1 No with Accessories. 1 Set INR 25,000/- 3. The bid document can be downloaded from the Purchaser website The Bidder can remit the amount On-line to the designated Bank account of the Purchaser (S.B. A/C No of State Bank of Hyderabad, Nacharam Branch, Hyderabad , A.P, India; (IFSC CODE:SBHY for overseas bidder use SWIFT CODE: SBHYINBB002) NOSTRO A/C NO BENEFICIARY AP Foods and enclose the original Transaction slip along with the bid application. In case of foreign payment IFSC code not required or furnish a Demand Draft for the required amount on any schedule bank payable to Managing Director A.P. Foods at Hyderabad, India. 4. (a) Cost of Bid document per schedule : Rs.1250/- + (non-refundable) (b) Date of commencement of : 28/04/2012 bidding document (c) Last date for receipt of : 03/05/2012 Queries (d) Last date for forwarding replies : 05/05/2012 to Queries 4

5 (e) Last date and time for : 10/05/2012 at 13:00 HRS IST Submission of bids (f) TIME AND DATE OF OPENING OF COVER-1(Technical bid) OF BI : 10/05/2012 / 14:30 HRS IST (g) TIME AND DATE OF OPENING : At the earliest under due intimation to the OF Cover 2 (Financial bid) of BID: shortlisted Bidders. (h) Place of opening of bids : CONFERENCE HALL ANDHRA PRADESH FOODS ROAD NO. 14, IDA, NACHARAM HYDERABAD (i) Address for : THE MANAGING DIRECTOR Communication ANDHRA PRADESH FOODS Road No. 14, IDA, NACHARAM, HYDERABAD , ANDHRA PRADESH, INDIA 4. All bids must be accompanied by a bid security (EMD) and along with the cost of the bid document separately as specified in the bid document and must be delivered to the above office at the date and time indicated above. No exemption of Bid Security will be given for any organization including Small Scale Industries and Government under takings. 5. Bids will be opened in the presence of Bidders or their authorized representatives who choose to attend on the specified date and time. 6. In the event of the date specified for bid receipt and opening being declared as a holiday for purchaser s office, the due date for submission of bids and opening of bids will be the following working day at the appointed times. 5

6 SECTION II: INSTRUCTIONS TO BIDDERS 6

7 SECTION II: INSTRUCTIONS TO BIDDERS TABLE OF CLAUSES Clause Topic Page Clause Topic Page No. Number No. No. Number No. A. Introduction D. Submission of Bids 1. Introduction Sealing and Marking of Bids Eligible Bidders Deadline for Submission of Bids Eligible Goods and Services Late Bids Cost of Bidding Modification and withdrawal of Bids14 B. Bidding Documents E. Opening and Evaluation of Bids 5. Contents of Bidding Documents Opening of Bids by the Purchaser Clarification of Bidding Documents Clarification of Bids Amendment of Bidding Documents Preliminary Examination Evaluation and Comparison of Bids 15 C. Preparation of Bids 26. Contacting the Purchaser Language of Bid 9 9. Documents Comprising the Bid Bid Form Bid Prices 10 F. Award of Contract 12. Bid Currencies Documents Establishing Bidder's 27. Post-qualification 16 Eligibility and Qualifications Award Criteria Documents Establishing Goods 29. Purchaser's Right to Accept Any Eligibility and Conformity to Bid Bid and to Reject Any or All Bids 16 Documents Notification of Award Bid Security Signing of Contract Period of Validity of Bids Corrupt or Fraudulent Practices Format and Signing of Bid 12 7

8 INSTRUCTIONS TO BIDDERS (ITB) A. Introduction 1. Introduction: 1.1 The Andhra Pradesh Foods, hereinafter referred to as purchaser, a Government of Andhra Pradesh Enterprise, currently a manufacturer of Ready-to-Eat and Ready-to-Cook Hot Food Mixes for feeding beneficiaries in the Integrated Child Development Services (ICDS) Projects of Andhra Pradesh, proposes to procure the required machinery and equipment for its expansion activities. 2. Eligible Bidders 2.1 This Invitation for Bids is open to all suppliers and manufacturers from any country subject to any prohibitions/restrictions imposed by the Government of India, who have had at least Five years of experience in installation and commissioning of machinery detailed herewith and will be subject to performance inspection prior to signing an agreement. Multiple bids for a schedule item by the same bidder either individually or as member of Joint Venture will disqualify both and all the bids of such bidder. 3. Eligible Goods and Services 3.1 All goods and ancillary services to be supplied under the Contract shall have their origin in eligible source countries, defined/declared by the Government of India from time to time. 3.2 For purposes of this clause, "origin" means the place where the goods are mined, grown, or produced or from which the ancillary services are supplied. Goods are produced when, through manufacturing, processing or substantial and major assembling of components, a commercially recognized product results that is substantially different in basic characteristics or in purpose or utility from its components. 3.3 The origin of goods and services is distinct from the nationality of the Bidder. 4. Cost of Bidding 4.1 The Bidder shall bear all costs associated with the preparation and submission of its bid, and Andhra Pradesh Foods, Hyderabad, hereinafter referred to as "the Purchaser", will in no case be responsible or liable for these costs, regardless of the conduct or outcome of the bidding process. 5. Content of Bidding Documents B. The Bidding Documents 5.1 The goods required, bidding procedures and contract terms are prescribed in the bidding documents. In addition to the Invitation for Bids, the bidding documents include: (a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) Instruction to Bidders (ITB); Conditions of Contract. Schedule of Requirements; Technical Description; Bid Form and Price Schedules; Contract Form; Performance Statement Form; Manufacturer s Authorization Form; Bank Guarantee for Advance Payment Form; Equipment and Quality Control Form. Acceptance Certificate by Purchaser. List of clientele. Technical data Check list of documents to be submitted with technical bid (Cover-1) 5.2 The Bidder is expected to examine all instructions, forms, terms, and specifications in the bidding documents. Failure to furnish all information required by the bidding documents or submission of a bid not substantially responsive to the bidding documents in every respect will be at the Bidder's risk and may result in rejection of its bid. 8

9 6. Clarification of Bidding Documents 6.1 A prospective Bidder requiring any clarification of the bidding documents may notify the Purchaser in writing by fax at the Purchaser's mailing address indicated in the Invitation for Bids. The Purchaser will respond thro Fax or by electronic mail to any request for clarification of the bidding documents, which it receives as per the time frame. The reply ( including an explanation of the query without identifying the source of enquiry) will be placed on the website of the purchaser for the benefit of all the prospective bidders. 7. Amendment of Bidding Documents 7.1 At any time prior to the deadline for submission of bids, the Purchaser may, for any reason, whether at its own initiative or in response to a clarification requested by a prospective bidder, modify the bidding documents by amendment. 7.2 All prospective bidders who have purchased the bidding documents will be notified of the amendment by fax / / uploading in the website of purchaser, and will be binding on them. All the prospective bidders are requested to visit the website frequently to know about changes, if any. 7.3 In order to allow prospective bidders reasonable time in which to take the amendment into account in preparing their bids, the Purchaser, at his discretion, may extend the deadline for the submission of bids. 8. Language of Bid C. Preparation of Bids 8.1 The bid prepared by the Bidder, as well as all correspondence and documents relating to the bid exchanged by the Bidder and the Purchaser shall be written in English language. Supporting documents and printed literature furnished by the Bidder may be in another language provided they are accompanied by an accurate translation of the relevant passages in the English language in which case, for purposes of interpretation of the Bid, the translation shall govern. 9. Documents Comprising the Bid 9.1 The bid prepared by the Bidder shall comprise the following components: (a) (b) (c) (d) (e) A Bid Form and a Price Schedule completed in all respects A documentary evidence established in accordance that the Bidder is eligible to bid and is qualified to perform the contract if its bid is accepted; A documentary evidence established in accordance that the goods and ancillary services to be supplied by the Bidder are eligible goods and services and conform to the bidding documents; and A bid security furnished in accordance to Clause 15 of ITB. This bid document each page duly signed with seal in token of accepting the terms and conditions thereof 10. Bid Form 10.1 The Bidder shall complete the Bid Form and the appropriate Price Schedule furnished in the bidding documents, indicating the goods to be supplied, a brief description of the goods, and their country of origin, quantity and prices. 9

10 11. Bid Prices 11.1 The Bidder shall indicate on the Price Schedule the unit prices and total bid prices of the goods it proposes to supply under the Contract. To this end, the Bidders are allowed the option to submit the bids for any one or more schedules specified in the Schedule of Requirements and to offer discounts for combined schedules. However, Bidders shall quote for the complete requirement of goods and services specified under each schedule on a single responsibility basis, failing which such bids will not be taken into account for evaluation and will not be considered for award Prices indicated on the Price Schedule shall be entered separately in the following manner: a) For Overseas Suppliers: CIF,Chennai / CIP, Shamshabad Customs Duty Packing & forwarding Customs Clearance Charges Inland transportation, Insurance and other local costs incidental to delivery upto Purchaser s Site at AP Foods, Hyderabad. Unloading charges at site. Any other Taxes and Duties as applicable. (b) For Indigenous Suppliers: Ex-factory / Ex-warehouse / Ex-showroom / Off-the-Shelf Excise duty Packing & forwarding /. Transport charges Transit Insurance upto delivery at AP Foods, Hyderabad. Unloading charges at site Sales & other taxes payable (at prevailing rates) Incidental services a) Performance of the on-site assembly, commissioning and start up of the equipment. b) Furnishing of detailed operation and maintenance manuals for each appropriate unit of supplied goods. c) Conduct of training of the Purchaser s personnel at the Project Site of Purchaser on operation and maintenance of each appropriate unit of supplied goods. d) Furnishing and handing over the tools required for assembly and maintenance of the supplied goods. e) Performance of maintenance and repair of the equipment at each location during the warranty period including supply of all spares. This shall not relieve the supplier of any warranty obligations under this contract. f) Maintenance and/or repairs for a period of two years after the end of the warranty period covered. The Maintenance charges will be comprehensive and cover the cost of all the spare parts required for replacement / repair of the equipment. The maintenance of the equipment shall be carried out on regular basis to ensure at least 95% up time or minimum down time Bidders quoting for more than one Schedule of Items must give the break-up as per above (ie., and ) separately The Purchaser may consider fractional supplies from any Bidder, if in the Purchaser s opinion some items of general nature which may not affect the performance of the key equipments supplied by the Bidder and may be economical and readily available. However, the Bidder shall be responsible for providing detailed specifications, Foundation details and Drawings for all the items in the relevant Schedule. 10

11 11.3 The Bidder's separation of the price components will be solely for the purpose of facilitating the comparison of bids by the Purchaser and will not in any way limit the Purchaser's right to contract on any of the terms offered Firm Price: Prices quoted by the Bidder shall be firm and final during the Bidder's performance of the Contract and not subject to variation on any account. A bid submitted with an adjustable price quotation will be treated as non-responsive and rejected. 12. Bid Currencies 12.1 Prices shall be quoted in Indian Rupees for Machinery and Equipment sourced in India and Imported Equipment. 13. Documents Establishing Bidder's Eligibility and Qualifications 13.1 The Bidder shall furnish, as part of his bid, documents establishing the Bidder's eligibility to bid and his qualifications to perform the Contract if his bid is accepted The Bidder shall provide documentary evidence of his qualifications to perform the Contract if his bid is accepted, and shall establish his credibility to the Purchaser's satisfaction. (a) (b) that, in the case of a Bidder offering to supply goods under the contract which the Bidder did not manufacture or otherwise produce, the Bidder has been duly authorized (as per authorization form in Section X) by the goods' Manufacturer or producer to supply the goods in India. that the Bidder has the financial, technical, and production capability necessary to perform the Contract and meets the criteria outlined in the Qualification requirements specified in Section VI. To this end, all bids submitted shall include the following information: (i) (ii) The legal status, place of registration and principal place of business of the company or firm or partnership, etc.; Details of experience and past performance of the bidder on equipment offered and on those of similar nature within the past Five years and details of current contracts in hand and other commitments (suggested proforma given in Section IX); 14. Documents Establishing Goods' Eligibility and Conformity to Bidding Documents 14.1 The Bidder shall furnish, as part of his bid, documents establishing the eligibility and conformity to the bidding documents of all goods and services which the Bidder proposes to supply under the contract The documentary evidence of the goods and services eligibility shall consist of a statement in the Price Schedule on the country of origin of the goods and services offered which shall be confirmed by a certificate of origin at the time of shipment The documentary evidence of conformity of the goods and services to the bidding documents may be in the form of literature, drawings and data, and shall consist of : (a) A detailed description of the essential technical and performance characteristics of the goods ; (b) (c) a list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser; and an item-by-item commentary on the Purchaser's Technical Descriptions demonstrating substantial responsiveness of the goods and services to those Description or a statement of deviations and exceptions to the provisions of the Technical Specifications For purposes of the commentary to be furnished, the Bidder shall note that standards for workmanship, material and equipment, and references to brand names or catalogue numbers designated by the Purchaser in its Technical Specifications are intended to 11

12 be descriptive only and not restrictive. The Bidder may substitute alternate standards, brand names and/or catalogue numbers in its bid, provided that it demonstrates to the Purchaser's satisfaction that the substitutions ensure substantial equivalence to those designated in the Technical Specifications. 15. Bid Security (EMD) 15.1 The Bidder shall furnish, as part of its bid, a bid security in the amount as specified in Section-IV of Schedule of Requirements The bid security is required to protect the Purchaser against the risk of Bidder's conduct which would warrant the security's forfeiture The bid security shall be in Indian Rupees and shall be in the form of banker s cheque / demand draft on any nationalized / scheduled Bank in India (Except foreign bank, cooperative bank and gramina bank) or any other Bank acceptable to the Purchaser and drawn in favor of The Managing Director, A P Foods payable at Hyderabad 15.4 Any bid not secured as mentioned above will be rejected by the Purchaser as non-responsive Unsuccessful bidder's bid security will be discharged/returned as promptly as possible but not later than 30 days after the expiration of the period of bid validity prescribed by the Purchaser The successful Bidder's bid security will be discharged when the second advance payment falls due The bid security may be forfeited: (a) (b) if a Bidder withdraws his bid during the period of bid validity specified by the Bidder on the Bid Form; or in case of a successful Bidder, if the Bidder fails; (i) to sign the Agreement of Contract according to the terms and conditions laid down; 16. Period of Validity of Bids 16.1 Bids shall remain valid for (90) days after the date of bid opening prescribed by the Purchaser. A bid valid for a shorter period shall be rejected by the Purchaser as non-responsive In exceptional circumstances, the Purchaser may solicit the Bidder's consent to an extension of the period of validity. The request and the responses thereto shall be made in writing or by fax / .. The bid security provided shall also be suitably extended. A Bidder may refuse the request without forfeiting his bid security. A Bidder granting the request will not be required nor permitted to modify his bid, except as described hereinafter Bid evaluation will be based on the bid prices without taking into consideration the above corrections. 17. Format and Signing of Bid 17.1 The Bidder shall prepare two copies of the bid, clearly marking each "Original Bid" and "Copy Bid", as appropriate. In the event of any discrepancy between them, the original shall govern. Soft copy is also to be provided along with the Bid 17.2 The original and all copies of the bid shall be typed or written in indelible ink and shall be signed by the Bidder or a person or persons duly authorized to bind the Bidder to the Contract. The letter authorization shall be indicated by written power-ofattorney accompanying the bid. All pages of the bid, except for un-amended printed literature, shall be initialed by the person or persons signing the bid Any interlineations, erasures or overwriting shall be valid only if they are initialed by the persons or persons signing the bid The Bidder shall furnish information as described in the Form of Bid on commissions or gratuities, if any, paid or to be paid to agents relating to this Bid, and to contract execution if the Bidder is awarded the contract. 12

13 D. Submission of Bids 18. Sealing and Marking of Bids The Bid submission is a two cover based method. Cover I: Shall contain besides a covering letter, Bid form and all the details and documents as required under section VI and other provisions of the bid document, performance statement under section IX, manufacturers authorization form under section X, Proforma for Equipment and Quality control employed by the manufacturer under section XII, list of clientele under section XIV, Technical data under section XV Check list for documents to be submitted with the technical bid ( Cover-1) under section XVI and Bid security under clause 15 of section II of the Bid Document, complete in all respects. The bid document as issued by AP Foods each page duly signed by the authorized person of the bidder should also be submitted with cover I as a token of acceptance of all the terms and conditions contained therein Check list for documents to be submitted with the technical bid (Cover-1) is provided in Annexure-XVI Cover II: Shall contain bid form and price schedule under section VII The Bid (both Cover I and Cover II shall be in two sets, one original and one copy). The Bidders shall seal both original and copies of covers I & II separately (duly signed by authorized person and stamped with official company seal) and a soft copy in the form of CD. The two covers both original and copy shall then be placed in an outer envelope The inner and outer envelopes shall: (a) be addressed to the Purchaser at the following address: The Managing Director, Andhra Pradesh Foods, Road No. 14, Industrial Development Area, Nacharam, Hyderabad (A.P) INDIA. (b) bear the Project Name, the Invitation for Bids (IFB) title and number, and a statement "Do not open before 14:30 hours on " 18.3 The cover -1 super scribed as Technical data for pre-qualification and cover 2 shall be super scribed bid form and price schedule (price bid). Inner envelopes both shall be super scribed with the words number of each schedule i.e of the tender 18.4 The inner envelopes shall also indicate the name and address of the Bidder to enable the bid to be returned unopened in case it is declared "late" If the outer envelope is not sealed and marked as required, the Purchaser will assume no responsibility for the bid's misplacement or premature opening Telex, cable or facsimile bids will be rejected. 19. Deadline for Submission of Bids 19.1 Bids must be received by the Purchaser at the address specified, no later than the time and date specified in the Invitation for Bids (Section I). In the event of the date specified for bid receipt and opening being declared as a closed holiday for purchaser s office, the due date for submission of bids and opening of bids will be the following working day at the appointed times The Purchaser may, at its discretion, extend this deadline for submission of bids by amending the bid documents in which case all rights and obligations of the Purchaser and Bidders previously subject to the deadline will thereafter be subject to the deadline as extended. 13

14 20. Late Bids 20.1 Any bid received by the Purchaser after the deadline for submission of bids prescribed by the Purchaser, will be rejected and/or returned unopened to the Bidder. 21. Modification and Withdrawal of Bids 21.1 The Bidder may modify or withdraw its bid, respecting the contents of Cover 1 and/or Cover 2 separately after the bid's submission, provided that written notice of the modification or withdrawal is received by the Purchaser prior to the deadline prescribed for submission of bids The Bidder's modification or withdrawal notice shall be prepared, sealed, marked and dispatched in accordance to the provisions. A withdrawal notice may also be sent by telex or cable or fax but followed by a signed confirmation copy, post marked not later than the deadline for submission of bids No bid may be modified subsequent to the deadline for submission of bids No bid may be withdrawn in the interval between the deadline for submission of bids and the expiration of the period of bid validity specified by the Bidder on the bid form. Withdrawal of a bid during this interval may result in the Bidder's forfeiture of its bid security. 22. Opening of Bids by the Purchaser E. Bid Opening and Evaluation 22.1 The Purchaser will open Cover 1 of the bids, in the presence of Bidders' representatives who choose to attend as per the time schedule. The bidders names, bid modifications or withdrawals and bid security details will only be announced. No bid shall be rejected at bid opening, except for late bids, which shall be returned unopened to the Bidder. Absence of requisite Bid Security will automatically result in rejection of such Bid.. The Bidders' representatives who are present shall sign a register evidencing their attendance On opening the cover II on bid prices, discounts, and such other details as the Purchaser, at its discretion, may consider appropriate, will be announced and recorded at the opening Bids and modifications that are not opened and read out at bid opening shall not be considered further for evaluation, irrespective of the circumstances. Withdrawn bids will be returned unopened to the bidders The Purchaser will prepare minutes of the bid opening. 23. Clarification of Bids 23.1 During evaluation of bids, the Purchaser may, at its discretion, ask the Bidder for a clarification of his bid. The request for clarification and the response shall be in writing and no change in prices or substance of the bid shall be sought, offered or permitted. 24. Preliminary Examination 24.1 The Purchaser will examine the bids to determine whether they are complete, whether any computational errors have been made, whether required sureties have been furnished, whether the documents have been properly signed, and whether the bids are generally in order. Bids from Agents, without proper authorization from the manufacturer as per Section X, shall be treated as non-responsive. 14

15 24.2 Arithmetical errors will be rectified on the following basis. If there is a discrepancy between the unit price and the total price that is obtained by multiplying the unit price and quantity, the unit price shall prevail and the total price shall be corrected. If the supplier does not accept the correction of errors, its bid will be rejected. If there is a discrepancy between words and figures, the amount in words will prevail The Purchaser may waive any minor non-conformity or irregularity in a bid which does not constitute a material deviation, provided such a waiver does not prejudice or affect the relative ranking of any Bidder Prior to the detailed evaluation, the Purchaser will determine the substantial responsiveness of each bid to the bidding documents. For purposes of these Clauses, a substantially responsive bid is one which conforms to all the terms and conditions of the bidding documents without material deviations. Deviations from or objections or reservations to critical provisions such as those concerning Warranty (Conditions of Contract Clause 12), Payment terms & Discharge of Bid security (Conditions of Contract clause 13) Force Majeure (Conditions of Contract Clause 18), Applicable law (Conditions of Contract Clause 23) and Taxes & Duties (Conditions of Contract Clause 13) will be deemed to be a material deviation. The Purchaser's determination of a bid's responsiveness is to be based on the contents of the bid itself without recourse to extrinsic evidence If a bid is not substantially responsive, it will be rejected by the Purchaser and may not subsequently be made responsive by the Bidder by correction of the non-conformity. 25. Evaluation and Comparison of Bids 25.1 The Purchaser will evaluate and compare the bids which have been determined to be substantially responsive, for each schedule separately. No bid will be considered if the complete requirements covered in the schedule is not included in the bid. However, Bidders are allowed the option to bid for any one or more schedules and to offer discounts for combined schedules. These discounts will be taken into account in the evaluation of the bids The Purchaser's evaluation of a bid will be landed cost of the equipments, but shall exclude: any allowance for price adjustment during the period of execution of the Contract, if provided in the bid The Purchaser's evaluation of a bid will take into account, in addition to the bid price (Ex-factory/ex-warehouse/off-the-shelf price of the goods offered from within India, such price to include all costs as well as duties and taxes paid or payable on components and raw material incorporated or to be incorporated in the goods, and Excise duty on the finished goods, if payable) and price of incidental services, the following factors, in the manner and to the extent indicated in the Technical Specifications: (a) (b) cost of inland transportation, insurance and other costs within India incidental to the delivery of the goods to their final destination; delivery schedule offered in the bid; (c) (d) (e) deviations in payment schedule from that specified in the Conditions of Contract; cost of two years maintenance service after the warranty period; and the availability in India of spare parts and after-sales services for the goods / equipment offered in the bid The evaluation method to be applied for the above components is as follows: (a) Inland Transportation, ex-factory/from port-of-entry, Insurance, Incidentals and unloading at site. (i) Inland transportation, insurance and other incidentals for delivery of goods to the final destination - The above costs will be added to the bid price. (b) Delivery Schedule: (i) The Purchaser requires that the goods under the Invitation for Bids shall be delivered at the time specified in the Schedule of Requirements. The estimated time of arrival of the goods at the project site should be calculated for each bid after allowing for reasonable transportation time. Treating the bid offering the scheduled time of arrival as the base, a delivery "adjustment" will be calculated for other bids at 5% of the ex-factory price including excise duty for each month of delay beyond the base and this will be added to the bid price for evaluation. No credit will 15

16 be given to earlier deliveries and bids offering delivery beyond (2) months of stipulated delivery period will be treated as unresponsive. (c) Deviation in Payment Schedule: The Conditions of Contract stipulate the payment schedule offered by the Purchaser. If a bid deviates from the schedule and if such deviation is considered acceptable to the Purchaser, the bid will be evaluated by calculating interest earned for any earlier payments involved in the terms outlined in the bid as compared to those stipulated in this invitation, at a rate of 18% percent per annum. This will be added to the Bid Price for evaluation purpose. (d) Cost of two (2) years maintenance service after Warranty period: The charges for 2 years maintenance service after the expiry of Warranty period would be evaluated from the price schedule and shall be added to the bid price for evaluation purpose. (e) Spare Parts and After Sales Service Facilities in India: The cost to the Purchaser of establishing the minimum service facilities and parts inventories, as outlined elsewhere in the bidding documents, if quoted separately, shall be added to the bid price for evaluation. 26. Contacting the Purchaser 26.1 Subject to ITB Clause 23, no Bidder shall contact the Purchaser on any matter relating to its bid, from the time of the bid opening to the time the Contract is awarded. If the bidder wishes to bring additional information to the notice of the Purchaser, it should do so in writing / Fax / and with a hard copy Any effort by a Bidder to influence the Purchaser in its decisions on bid evaluation, bid comparison or contract award may result in rejection of the Bidder's bid. F. Award of Contract 27. Post-qualification 27.1 In the absence of pre-qualification, the Purchaser will determine to its satisfaction whether the Bidder that is selected as having submitted the lowest evaluated responsive bid meets the criteria specified and is qualified to perform the contract satisfactorily The determination will take into account the Bidder's financial, technical and production capabilities. It will be based upon an examination of the documentary evidence of the Bidder's qualifications submitted by the Bidder, as well as such other information as the Purchaser deems necessary and appropriate An affirmative determination will be a prerequisite for award of the Contract to the Bidder. A negative determination will result in rejection of the Bidder's bid, in which event the Purchaser will proceed to the next lowest evaluated bid to make a similar determination of that Bidder's capabilities to perform the contract satisfactorily. 28. Award Criteria 28.1 The Purchaser may award the Contract to the successful Bidder whose bid has been determined to be substantially responsive, both technically and economically, provided further that the Bidder is determined to be qualified to perform the Contract satisfactorily by the purchaser. 29 Purchaser's Right to Accept Any Bid and to Reject Any or All Bids 29.1 The Purchaser reserves the right to accept or reject any bid totally or in part and to annul the bidding process and reject all bids at any time prior to award of Contract, without thereby incurring any liability to the affected Bidder or bidders or any obligation to inform the affected Bidder or bidders of the grounds for the Purchaser's action. 16

17 30. Notification of Award 30.1 Prior to the expiration of the period of bid validity, the Purchaser will notify the successful bidder in writing by fax or , to be confirmed in writing by registered letter, that its bid has been accepted and also place the details on the web site The notification of award will constitute the formation of the Contract. 31. Signing of Contract 31.1 At the same time as the Purchaser notifies the successful bidder that its bid has been accepted, the Purchaser will send the bidder the Contract Form provided in the bidding documents, incorporating all agreements between the parties Within 15 days of receipt of the Contract Form, the successful bidder shall sign and date the Contract and return it to the Purchaser. 32 Corrupt or Fraudulent Practices 32.1 The Purchaser requires that the Bidders/ Suppliers/ Contractors observe the highest standard of ethics during the procurement and execution of the contract. In pursuance of this policy, the Purchaser: (a) defines, for the purposes of this provision, the terms set forth as follows : (i) (ii) corrupt practice means the offering, giving, receiving or soliciting of any thing of value to influence the action of a public official in the procurement process or in contract execution; and fraudulent practice means a misrepresentation of facts in order to influence a procurement process or the execution of a contract to the detriment of the Purchaser, and includes collusive practice among Bidders (prior to or after bid submission) designed to establish bid prices at artificial non-competitive levels and to deprive the Purchaser of the benefits of free and open competition; (b) will reject a proposal for award if it determines that the Bidder recommended for award has engaged in corrupt or fraudulent practices in competing for the contract in question; (c) will declare a firm ineligible, either indefinitely or for a stated period of time, if it at any time determines that the firm has engaged in corrupt or fraudulent practices in competing for, or in executing the contract. 17

18 SECTION III: CONDITIONS OF CONTRACT 18

19 CONDITIONS OF CONTRACT TABLE OF CLAUSES Clause Number Topic Page Number 1 Definitions 20 2 Application 20 3 Standards 20 4 Use of Contract Documents and Information 20 5 Patent Rights 21 6 Inspection and Tests 21 7 Packing 23 8 Delivery and Documents 24 9 Insurance Incidental Services Spare Parts Warranty Payment Change Orders Delays in Supplier's Performance Liquidated Damages Termination for Default Force Majeure Termination for Insolvency Termination for Convenience Resolution of Disputes Governing Language Applicable Law Notices Sub-contracts Assignment Progress of Supply Specifications: Synchronization: 30 19

20 Conditions of Contract 1. Definitions 1.1 In this Contract, the following terms shall be interpreted as indicated: (a) (b) (c) (d) (e) (f) (g) (h) "The Contract" means the agreement entered into between the Purchaser and the Supplier, as recorded in the Agreement of Contract signed by the parties, including all the attachments and appendices thereto and all documents incorporated by reference therein; "The Contract Price" means the price payable to the Supplier under the Contract for the full and proper performance of its contractual obligations. "The Goods" means all the equipment, machinery, and/or other materials which the Supplier is required to supply to the Purchaser under the Contract; "Services" means services ancillary to the supply of the Goods, such as transportation and insurance, and any other incidental services, such as installation, commissioning, provision of technical assistance, training and other obligations of the Supplier covered under the Contract; The Purchaser is The Andhra Pradesh Foods, Road No.14, Industrial Development Area, Nacharam, Hyderabad , Andhra Pradesh (India) The Supplier means the individual or firm supplying the Goods and Services under this Contract. The Project Site means the factory premises of M/S AP Foods, Road No.14, IDA, Nacharam, Hyderabad , Andhra Pradesh (India). Day means calendar day. 2. Application 2.1 These Conditions shall apply to the extent that they are not superseded by provisions in other parts of the Contract. 3. Standards 3.1 The Goods supplied under this Contract shall conform to the standards mentioned in the Technical Specifications, and, when no applicable standard is mentioned, to the authoritative standard appropriate to the Goods' country of origin and such standards shall be the latest issued by the concerned institution. 4. Use of Contract Documents and Information 4.1 The Supplier shall not, without the Purchaser's prior written consent, disclose the Contract, or any provision thereof, or any specification, plan, drawing, pattern, sample or information furnished by or on behalf of the Purchaser in connection therewith, to any person other than a person employed by the Supplier in performance of the Contract. Disclosure to any such employed person shall be made in confidence and shall extend only so far as may be necessary for purposes of such performance. 4.2 The Supplier shall not, without the Purchaser's prior written consent, make use of any document or information enumerated in Clause 4.1 except for purposes of performing the Contract. 4.3 Any document, other than the Contract itself, enumerated in Clause 4.1 shall remain the property of the Purchaser and shall be returned (in all copies) to the Purchaser on completion of the Supplier's performance under the Contract if so required by the Purchaser. 20

21 5. Patent Rights 5.1 The Supplier shall indemnify the Purchaser against all third-party claims of infringement of patent, trademark or industrial design rights arising from use of the Goods or any part thereof in India. 6. Inspection and Tests 6.1 The Purchaser or its representative shall have the right to inspect and/or test any or all the equipments for their conformity to the contract, prior to dispatch from the manufacturer s premises or may waive such prior inspection. Such inspection and clearance will not prejudice the right of the consignee to inspect and test the equipment on receipt at destination. The Purchaser shall also have the right to specify as to what inspections and tests it needs and the places to be conducted. The Purchaser shall notify the Supplier in writing in a timely manner of the identity of any representatives retained for these purposes. 6.2 If the inspections are conducted by the supplier at the premises of the Supplier or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data - shall be furnished to the inspectors at no charge to the Purchaser. 6.3 If the equipment fails to meet the laid down specifications, the Supplier shall take immediate steps to remedy the deficiency or replace the defective equipment to the satisfaction of the Purchaser free of cost. 6.4 The Purchaser's right to inspect, test and, where necessary, reject the Goods after the Goods' arrival at Project Site shall in no way be limited or waived by reason of the Goods having previously been inspected, tested and passed by the Purchaser or its representative prior to the Goods shipment. 6.5 Nothing in this Clause shall in any way release the Supplier from any warranty or other obligations under this Contract. 6.6 The following inspection procedures and tests are required by the Purchaser: (i) The Supplier shall get each equipment inspected in manufacturer s works by an accredited testing agency acceptable to the purchaser and submit a test certificate and also guarantee/warranty certificate that the equipment conforms to laid down specification. The Purchaser or its representative shall inspect and/or test any or all the equipments for their conformity to the contract, prior to dispatch from the manufacturer s premises. Such inspection and clearance will not prejudice the right of the consignee to inspect and test the equipment on receipt at destination. In the event the manufacturer s premises are outside India, the Purchaser may waive pre-dispatch inspection. If the equipment fails to meet the laid down specifications, the Supplier shall take immediate steps to remedy the deficiency or replace the defective equipment to the satisfaction of the Purchaser. (ii) Tests upon Installation and Commissioning a) The Supplier shall give to the Purchaser 21 days notice of the date after which he will be ready to make the tests of completion on machines. Duration and methodology of testing shall be mutually agreed between the Purchaser and the Supplier. b) If the Purchaser fails to appoint the date and time after having been asked to do so, or does not attend at the time and place appointed, the Supplier shall be entitled to proceed with the tests in his absence. The tests shall then be deemed to have been made in the presence of the Purchaser and the results of the tests shall be accepted as accurate. 21

22 c) If the tests are being unreasonably delayed by the Supplier, the Purchaser may give notice requiring the Supplier to make the tests within (21) days. After the receipt of such notice, the Supplier shall make the tests on such days within that period as the supplier may fax and of which he shall give notice to the Purchaser. If the Supplier fails to make that test within 21 days, the Purchaser may himself proceed with the tests. All tests so made by the Purchaser shall be at the risk and cost of the Supplier and the cost thereof shall be deducted from the Supplier s price. The test shall then be deemed to have been made in the presence of the Supplier and results of the tests shall be accepted as accurate. d) If the Goods/Service or any section fails to pass the tests, the Supplier may require such tests to be repeated on the same terms and conditions. All costs to which the Purchaser may be put to by the repetition of the tests under this para or under para (c) shall be deducted from the Contract Price. e) If the Purchaser and the supplier disagree on the interpretation of the test results each shall give a statement of their views to the other within 14 days after such disagreement arises. The statement shall be accompanied by all relevant evidence. The Purchaser will review both the statements and render a final decision within a further period of fourteen (14) days, which shall be binding on the supplier. f) If the Goods/Services or any section fails to pass the tests on the repetition thereof under Para (d) the Purchaser after due consultation with the supplier, shall be entitled to: (i) Order one further repetition of the tests under the conditions of para (d) or (ii) Reject the Goods or a section thereof in which event the Purchaser shall have the same remedies against the supplier as are provided under para (l). (iii) Issue a taking over certificate, if the purchaser so wishes, notwithstanding that the goods are not complete. The Supplier s price shall then be reduced by such amount as may be agreed to by the Purchaser and the Supplier or failing an agreement as may be determined through arbitration. g) In considering the results of tests carried out and stipulations under para (k) and (n) the Purchaser shall make allowances for the effect of any use of the Goods by him on the performance or other characteristic of the Goods. h) As soon as the Goods/Services or any section thereof has passed the tests, the Purchaser shall issue a certificate to the supplier to that effect. i) The Goods/Services shall be accepted by the Purchaser when they have been completed in accordance with the Contract, except in minor respects that do not effect the use of the Goods for their intended purposes and having passed the tests on completion and a taking over certificate has been issued or deemed to have been issued in accordance with para j (i). j) The Supplier may apply by notice to the Purchaser for a taking over certificate not earlier than 14 days before the goods will in the Supplier s opinion, be complete and ready for taking over under para (i). The Purchaser shall within 28 days after the receipt of the Supplier s application either: i) Issue the taking over certificate to the Supplier stating the date on which the works were completed and ready for taking over. Or ii) Reject the application giving his reasons and specifying the work required to be done by the supplier to enable the taking over certificate to be issued. If the services are divided by the Contract in the sections, the supplier shall be entitled to apply for separate taking over certificate for each such section. 22