1. Material Fraction Composition Table 1 The results of XRF screening and chemical test (Unit mg/kg) Element Data (VI) Pb/Cd/Hg / 1 CASE B

Transcription

1 ZEROPLUS TECHNOLOGY CO., LTD. 2F., NO. 123, JIAN 8TH RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN The following sample(s) was/were submitted and identified by/on behalf of the applicant as Sample Submitted By Sample Description Sample Receiving Date Testing Period ZEROPLUS TECHNOLOGY CO., LTD. BUS EXPERT 2015/04/ /04/15 to 2015/04/29 ======================================================================================================================================== Test Result(s) Conclusion Please refer to next page(s). Based upon the performed tests on submitted samples, the test results comply with the limits of RoHS Directive 2011/65/EU Annex II with the exempted materials below according to the declaration from applicant 1. METALLIC NUT (No.1.10) in Table 1 Lead (Pb) ("6(c), Copper alloy containing up to 4% lead by weight" in Directive 2011/65/EU) 1/11

2 1. Material Fraction Composition Table 1 The results of XRF screening and chemical test (Unit mg/kg) Element Data (VI) Pb/Cd/Hg / 1 CASE BLACK/SILVER COLORED METALLIC PAD BLACK/SILVER COLORED METALLIC CASE BLACK/SILVER COLORED METALLIC PLATE Pb --- Cd --- Hg --- Pb --- Cd --- Hg --- Pb --- Cd --- Hg (VI) Negative 2/11

3 Element Data (VI) Pb/Cd/Hg / 1 CASE BLACK METALLIC SCREW BLACK POLYMER SHEET LABEL WITH BLACK PRINT LENS 3/11 Pb --- Cd --- Hg --- Pb --- Cd --- Hg Pb --- Cd --- Hg --- Pb --- Cd --- Hg ---

4 1 CASE TRANSLUCENT PLASTIC STICK 1.10 METALLIC NUT 1.11 BLACK METALLIC MESH BRASS METALLIC SCREW 4/11 Element Data (VI) Pb/Cd/Hg / Pb --- Cd --- Hg --- Pb --- Cd --- Hg Pb *2 Cd --- Hg --- Pb --- Cd --- Hg ---

5 2 PCBA PCBA PCBA TRANSLUCENT PLASTIC BUTTON WITH BLACK PRINT Composite Material 2.4 5/11 Element Data (VI) Pb/Cd/Hg / Pb Cd --- Hg (VI) Pb --- Cd --- Hg --- Pb --- Cd --- Hg Pb --- Cd --- Hg ---

6 Element Data (VI) Pb/Cd/Hg / 2 PCBA METALLIC PIN BLUE PLASTIC WHITE PLASTIC BLUE PLASTIC 6/11 Pb --- Cd --- Hg --- Pb --- Cd --- Hg Pb --- Cd --- Hg Pb --- Cd --- Hg

7 2 3 PCBA FAN 2.9 METALLIC TUBE 3.1 LABEL WITH GREEN PRINT FRAME JACKET 7/11 Element Data (VI) Pb/Cd/Hg / Pb --- Cd --- Hg --- Pb --- Cd --- Hg --- Pb --- Cd --- Hg Pb --- Cd --- Hg ---

8 Element Data (VI) Pb/Cd/Hg / 3 4 FAN ACCESSORY RED PLASTIC JACKET WHITE PLASTIC TUBE JACKET 8/11 Pb --- Cd --- Hg --- Pb --- Cd --- Hg --- Pb --- Cd --- Hg --- Pb --- Cd --- Hg ---

9 Element Data (VI) Pb/Cd/Hg / 4 ACCESSORY WHITE PLASTIC JACKET METALLIC CLAMP 9/11 Pb --- Cd --- Hg --- Pb --- Cd --- Hg Pb --- Cd --- Hg --- Pb Cd --- Hg (VI) Negative

10 Test Item MDL (mg/kg) XRF Test method MDL screening Test Item (s) Unit Method Category Composite (mg/kg) threshold Element Material (mg/kg) s XRF Pb With reference to Monobromobiphenyl mg/kg 5 (X-ray Cd IEC Dibromobiphenyl mg/kg 5 fluorescence) Hg Tribromobiphenyl mg/kg Tetrabromobiphenyl mg/kg n.a. 250 Pentabromobiphenyl mg/kg 5 Hexabromobiphenyl mg/kg 5 Test Item (s) Test method MDL Heptabromobiphenyl mg/kg 5 Facilities (mg/kg) Octabromobiphenyl mg/kg 5 (VI) Nonabromobiphenyl mg/kg With reference to IEC 5 With reference to IEC UV Decabromobiphenyl mg/kg (For and Electronics) s Determination of Monobromodiphenyl ether mg/kg and by GC/MS. 5 With reference to IEC _* - Dibromodiphenyl ether mg/kg 5 (For Coatings on ) Tribromodiphenyl ether mg/kg 5 Pb/Cd With reference to IEC ICP-AES Tetrabromodiphenyl ether mg/kg 5 Pentabromodiphenyl ether mg/kg 5 Hg With reference to IEC ICP-AES Hexabromodiphenyl ether mg/kg 5 Heptabromodiphenyl ether mg/kg 5 Octabromodiphenyl ether mg/kg 5 Nonabromodiphenyl ether mg/kg 5 Decabromodiphenyl ether mg/kg 5 10/11

11 1. mg/kg = ppm 2. = not detected or lower than MDL 3. MDL = Method detection limit 4. "---" = not conducted 5. n.a. = not applicable The XRF result of for metal sample is conducted from Mark *1 *2 --*2 *3 *4 Description of Mark The sample weight is not enough to conduct chemical tests. The item is exempted from RoHS directive. The item might be exempted from RoHS directive. The result was retested after regetting the same sample from client. The sample is provided separately from the client. semi-quantitative method of polymer. If the result is shown as, the reading will be less than 100ppm. 6. " - " = Not Regulated 7. _* Spot-test Negative = Absence of (VI) coating, Positive = Presence of (VI) coating; (The tested sample should be further verified by boiling-water-extraction method if the spot test result cannot be confirmed.) Boiling-water-extraction Negative = Absence of (VI) coating Positive = Presence of (VI) coating; the detected concentration in boiling-water-extraction solution is equal or greater than 0.02 mg/kg with 50 cm 2 sample surface area. 8. Magnetic samples can not be located on test position and there are breakdown risks on XRF equipment. Therefore, this kind of sample will be conducted chemical test directly. 9. If the test result by EDXRF analysis is greater than XRF screening threshold, the test sample should be further conducted by chemical test. 11/11