DOOSAN Heavy Industries & Construction Co., Ltd KUKDO Chemical Co., Ltd
|
|
|
- Catherine Merritt
- 5 years ago
- Views:
Transcription
1
2 Contents - KOCES General - KOCES Missions - KOCES Activities - Qualification of Coating Inspection for NPP - Qualification of Coating Applicators in NPP - Qualification of Coating Applicators for NPP - Services for Soundness Inspection for NPP Coating - KOCES New activity - 2 -
3 KOCES General Established/endorsed by Korean Government on April Located in Bun-dang-gu, Sung-nam-si, Gyeong-gi-do - 6 employees, 10 members of Board, 20 Experts 10 Sponsor Companies, 100 Members of KOCES Based on Regulatory Guide 1.54 (Rev.1) by USNRC - Reinforcing the regulation for NPP Safety - No Qualification, No more work - Re-inspection for existed aged coatings on NPP - 3 -
4 KOCES General DURACHEMIE Co., Ltd DOOSAN Heavy Industries & Construction Co., Ltd KUKDO Chemical Co., Ltd HYUNDAI Engineering & Construction Co., Ltd AHAE Corporation DAEWOO Engineering & Construction Co., Ltd Korea Corrosion Protective Engineering LTD KCC Corporation SKS Paint Co., Ltd SAMHWA PAINT INDUSTRIAL Co., Ltd Chunil Construction Co., Ltd
5 KOCES Missions Supporting the Revised Regulatory Guide in NPP - Qualification, Certification, Education, etc. Propaganda the Advanced Tech in Paint/Coating - Improving the public understanding about Coating in Korea o No more Low Technique o One of the 4 Special Process in ASTM (welding, NDE, Heat Treatment, Coating) - Introducing Advanced Program/Tech. in Korea - Communicating with Advanced organization in the world - 5 -
6 KOCES Activities Qualification of coating Inspector in NPP Qualification of Coating Applicators in NPP Qualification of Coating Material of NPP Services for Soundness Inspection for NPP Paint Promotion of introduce the Advanced Program - 6 -
7 Qualification of Coating Inspector for NPP Based on USNRC Reg. Guide 1.54 Rev.1 (July 2000) - Qualification of Inspector : ASTM D Education of inspector : ASTM D Class Lectures (30 hours) & Examination - 4 days program at KAERI - So far, 10 Times (Appx. 250 persons Qualified) Level of Inspector: Ⅰ, Ⅱ, Ⅲ - Renewal Period : 3years - 7 -
8 Qualification of Coating Inspector for NPP Class Lectures Examination - 8 -
9 Qualification of Coating Applicator in NPP Based on USNRC Reg. Guide 1.54 Rev.1(July 2000) - On the steel : ASTM D On the Concrete : ASTM D4227 Actual Coating Work on Prepared Test Panel (Area) Verified by 2 Qualified Agency KOCES has 15 of Steel Test Panels and Some Concrete Test Area in NPP - 9 -
10 Qualification of Coating Applicator in NPP Spray Touch-up Roller
11 Qualification of Coating Applicator in NPP (20sec movie)
12 Qualification of Coating Material for NPP For Shin-Kori NPP Unit 3 & 4 (APR 1400) - First NPP in Korea with 1400 MW Class 3 Manufacturer (KCC, AHAE, SKS) were Qualified by KOCES 9 items were tested in Korea - Physical (adhesion, abrasion) - Chemical Resistance - Radiation Tolerance - Thermal Conductivity - DBA - Decontamination - Fire Evaluation - Reparability & Maintenance Only 1 items was tested in USA - Fire evaluation
13 Qualification of Coating Material for NPP Summary of Test Labs.
14 Services for Soundness Inspection for NPP coating Customer, KHNP (Korea Hydro Nuclear Power Co., Ltd) - 20 NPPs in operation, 8 NPPs under constriction, 10 NPPs in plan - 40% of Korean Electricity Service Activities - Status inspection - Prepare Test Panels (Steel & Concrete) - Test the Panels - Produce the Test Report (include Repair Method) Kori unit 1,2,3 & 4 Uljin unit 1, 2 Wolsung unit 1,2-14 -
15 Services for Soundness Inspection for NPP coating Steel Concrete Irradiation Equipment Co
16 Services for Soundness Inspection for NPP coating Test Profile Specimens Test Chamber Install & Operating Drawing Evaluation
17 Services for Soundness Inspection for NPP coating Evaluation Record
18 KOCES New Activity NACE CIP Class in Korea - Partnership Agreement between NACE & KOCES - KOCES serves NACE CIP Course 1&2, Peer Exam in Korea, in Korean, Under the Agreement - KOCES prepare all materials, Lab, text etc. under NACE instruction/guide. - Save the cost, Time, and Energy Class Open in January 2009 Hand Shake with RINA in Marine Coating Program
Managing the supply chain: Challenges and Overcoming in Korean nuclear industry
Managing the supply chain: Challenges and Overcoming in Korean nuclear industry TM on Topical Issues in the Development of Nuclear Power Infrastructure 4-7 February 2014, Vienna, Austria International
Nuclear Power Status in Korea
1 Ⅰ Ⅱ Ⅲ Ⅳ 2 Nuclear Power Status in Korea 01 Operating 업무처리 24 흐름 Units 23,116MW Constructing 업무처리흐름 5 Units 7,000 MW Planning(Holding) 업무처리흐름 4 Units 5,600 MW Hanul Operating : 6 Units Constructing :
Status of Decommissioning Preparation for Kori #1
Status of Decommissioning Preparation for Kori #1 http://www.khnp.co.kr December 6, 2017 KHNP Overview (1/2) AA (S&P), Aa2 (Moody s) KHNP Overview (2/2) Power Plants Operational status in Korea 24 22,529
Implementation of the Rules for the Continued Operation in Korea
Implementation of the Rules for the Continued Operation in Korea Presented by Jong-Jooh Jooh Kwon Contents I. Dynamic and Innovative Nuclear Energy Activities in Korea II. Process Implementing requirements
THE DESIGN CHARACTERISTICS OF ADVANCED POWER REACTOR Advanced NPP Development Office Korea Hydro & Nuclear Power Co., Ltd.
International Conference on Opportunities and Challenges for Water Cooled Reactors in the 21 th Century Vienna, IAEA, Oct. 27-30, 2009 THE DESIGN CHARACTERISTICS OF ADVANCED POWER REACTOR 1400 KIM, HAN-GON
CAPABILITY STATEMENT. Tank Repair
CAPABILITY STATEMENT Tank Repair page 1 of 7 Introduction Eptec is a specialist industrial contractor in Asset Preservation and Rehabilitation. Our expertise is engineered solutions using resin technology
The Status of Radiation Protection and its Prospect in KHNP
2015 ISOE Asia Symposium The Status of Radiation Protection and its Prospect in KHNP Sep. 10, 2015 Central Research Institute, KHNP kdkang@khnp.co.kr 0. Contents Ⅰ. Introduction Ⅱ. Dose Reduction Plan
My name is Yong Soo Kim. I have responsibility for the development of Advanced Nuclear Power
[slide 1] Good afternoon, ladies and gentlemen. My name is Yong Soo Kim. I have responsibility for the development of Advanced Nuclear Power Rectors for Europe, particularly Czech Republic. I wish that
1. Status of PSPC 2. Preparation for PSPC 3. Coating Technical File 4. Summary & conclusion
TSCF 2010 Shipbuilders meeting October 28, 2010 Sangsoo, Seo Hyundai Heavy Industries Co., Ltd. 1/51 1. Status of PSPC 2. Preparation for PSPC 3. Coating Technical File 4. Summary & conclusion
15 September Woo-Ho Lee, Seon Ho Song, Yong Lak Paek Nuclear Regulation Division. Korea Institute of Nuclear Safety (KINS)
CNRA International Workshop on New Reactor Siting, Licensing and Construction Experience Licensing Experience of New Reactor (APR1400) in Korea 15 September 2010 Woo-Ho Lee, Seon Ho Song, Yong Lak Paek
WACEL STUDY GUIDE. Reinforced Concrete Special Inspector (Concrete II)
WACEL STUDY GUIDE Reinforced Concrete Special Inspector (Concrete II) June 2017 Concrete II Study Guide Examination: The Concrete II examination is based on the references cited in this document. It is
Overview on Nuclear Power in the World
Part 1 Overview on Nuclear Power in the World World Nuclear Power Nuclear Power Generation Prospects of Nuclear Power Europe 197 units Asia 111 units Korea 21 units North America 122 units Africa 2 units
Class NK s Course of Action to Protective Coating Guidelines for Performance Standard for Protective Coating Contained in IMO Resolution MSC.
Class NK s Course of Action to Protective Coating Guidelines for Performance Standard for Protective Coating Contained in IMO Resolution MSC.215(82) Toshitomo Matsui, Class NK 1. PREFACE IACS Common Structural
Federal Authority for Nuclear Regulation UAE
Federal Authority for Nuclear Regulation UAE 2012 International ISOE ALARA Symposium Session VIII: New Developments in ALARA Programs Development of the FANR RP Program During Design Phases of New Builds
Coating Application Specialist (CAS): The New Standard for Quality, Safety, and Reliability in Industrial Painting. White Paper. v2.
White Paper Coating Application Specialist (CAS): v2.0 The New Standard for Quality, Safety, and Reliability in Industrial Painting Copyright 2013 by the Finishing Solutions Network Abstract The costs
NB-435 Rev. 1 Page 2 of 5
The National Board has developed this Body of Knowledge to outline duties and responsibilities for individuals performing inspections during the construction phase of nuclear components, parts, and appurtenances
Refining Corrosion Technologist NACE-RCT-001
Refining Corrosion Technologist NACE-RCT-001 NACE Coating Inspector Level 1 Written Exam Exam Preparation Guide October 2017 Exam Preparation Guide May 2017 1 Table of Contents Introduction... 3 Target
The ROK s Nuclear Energy Development and Spent Fuel Management Plans and Options
The ROK s Nuclear Energy Development and Spent Fuel Management Plans and Options Jungmin KANG Visiting Professor, KAIST Presentation given at 2012 Resilience and Security of Spent Fuel in East Asia WORKING
Introduction. Status of Worldwide Nuclear Power Plants*
KAIF-JAIF 24 th International Joint Forum Conference Nuclear on Structural Power Plant Mechanics Safety and in Decommissioning Reactor Technology 1 Introduction Status of Worldwide Nuclear Power Plants*
Korean Perspective on Nuclear Energy after Fukushima Accident
Korean Perspective on Nuclear Energy after Fukushima Accident Global 2011 Tsuruga Session December 16, 2011 Dohee Hahn Outline I II III IV Status of Nuclear Energy in Korea Impact of Fukushima Accident
Headquarters: Matco Services, Inc Ida Street PO Box 358 Valley, NE Phone: (800)
www.matcoinc.com Headquarters: Matco Services, Inc. 28800 Ida Street PO Box 358 Valley, NE 68064 Phone: (800) 221-9090 MATCO Services, Inc. Introduction 01 INTRODUCING MATCO SERVICES INCORPORATED MATCO
NACE Coating Inspector Bridge Specialty Written Exam NACE-Bridge-001
NACE Coating Inspector Bridge Specialty Written Exam NACE-Bridge-001 Exam Preparation Guide June 2017 Copyright 2017 by NACE International Institute. All rights reserved. Table of Contents Introduction...
SECTION METAL WELDING
SECTION 05222 - METAL WELDING PART 1 - GENERAL 1.01 SECTION INCLUDES A. Welding Rod/Electrodes B. Stud Shear Connectors C. Shop Welding D. Inspections and Tests by the Contractor E. Inspections and Test
Form 1: Proposal for a new field of technical activity
Form 1: Proposal for a new field of technical activity Circulation date: Click here to enter text. Closing date for voting: Click here to enter text. Proposer: SAC and ANSI Reference number (to be given
Introduction and Development of Nuclear Power Technology: The Korean Experience
NUCLEAR POWER MENA 2010 Introduction and Development of Nuclear Power Technology: The Korean Experience Sep 29. 2010 Jun Seok Yang 2 1. Status of Nuclear Power in Korea 3 Why Now Nuclear Renaissance? Proven
Applied Materials. The Power of Trust. The Future of Energy.
Applied The Power of Trust. The Future of Energy. Applied EXTENDING EQUIPMENT LIFE Fluorescent magnetic particle inspection Assessment of fracture features by scanning electron microscopy Failure analysis,
2/16/17. Copyright Material. A Repair Technician s Guide to the ACI Chapter 10 Quality Assurance. The Big Picture. Who is a Repair Technician?
Copyright Material This presentation is protected by US and International copyright laws. Reproduction, distribution, display and use of the presentation without permission of the speaker is prohibited.
CHAPTER 16 - GANTRIES
CHAPTER 16 - GANTRIES DS Temple 16.1 SCOPE This section covers the inspection of Sign Gantries as specified in the applicable chapter of the Specifications. It also covers the special attention which must
Steam Generator Tube Inspection I
Steam Generator Tube Inspection I Regulatory Efforts to Manage Alloy 600 Materials Degradation in Korea S-C. Kang, H-S. Shin, J-K. Hong, Korea Institute of Nuclear Safety, Republic of Korea ABSTRACT The
DOCUMENTATION FOR REVIEW AND ASSESSMENT - Application Set -
DOCUMENTATION FOR REVIEW AND ASSESSMENT - Application Set - Contents 1. Overview 2. Licensing Practice in Korea 3. Safety Reviews for License or Approval 4. Licensing Review Documents 5. Safety Approval
NSP SPECIALTY PRODUCTS Technical Data Sheet. NSP 120 High Performance Epoxy Coating
Description: NSP 120, a two component, 100% solids, high build epoxy coating, offers excellent chemical, corrosion and abrasion resistance in severe industrial environments. This extremely versatile product
Role of NDE in Regulatory Oversight of Nuclear Power Plants
Role of NDE in Regulatory Oversight of Nuclear Power Plants NDE2015, Hyderabad More info about this article: http://www.ndt.net/?id=21064 R.P. Gupta Atomic Energy Regulatory Board 022-25990568, e-mail:
Occupational Radiation Protection in Radioactive Waste Management
ISOE 2014 Asian ALARA Symposium The-K Hotel Gyeongju, Republic of Korea, 23-25 September 2014 Occupational Radiation Protection in Radioactive Waste Management 24 Sept., 2014 Byeongsoo KIM KINS 1 Contents
Post-Fukushima Action Plan in Korea. WNU-SI 2011, August 11 Christ Church, Oxford
Post-Fukushima Action Plan in Korea WNU-SI 2011, August 11 Christ Church, Oxford Contents Korean nuclear overview BK Kim Government action plan BS Jeong Post-Fukushima action plan MK Jo Nuclear Power Plants
COMPANY PROFILE 2015
COMPANY PROFILE 2015 CONTENTS Ⅰ. General Information Ⅱ. Our Business Ⅲ. Pictures of Field Works 1. General Status 2. History 3. Plant Overhaul Performance 4. Organization 5. Location of Sites and Head
INNOVATION & TRUST BUYANG INDUSTRY. Natural Resources Pipeline Solution COMPANY PROFILE & MANUFACTURING PRODUCT QUALITY & CUSTOMER ORIENTATION
INNOVATION & TRUST QUALITY & & MANUFACTURING PRODUCT Overview, established three decades ago, pursues playing a new and important role in natural resources pipeline business. We support our customers providing
SECTION SHOP-APPLIED METAL FINISHES
SECTION 05 0513 SHOP-APPLIED METAL FINISHES This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can
1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces.
SECTION 05500- METAL FABRICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
AREMA COMMITTEE 8. Letter Ballot Number
AREMA COMMITTEE 8 Letter Ballot Number 08-17-06 Attached is a copy of the proposed addition to Part 1 of Chapter 8, regarding new section 1.27 Cathodic Protection and C 1.27 commentary. Please review the
JSCE-K Test methods for weathering resistance of. concrete surface coating materials
JSCE-K 511-2007 Test methods for weathering resistance of concrete surface coating materials JSCE-K 511-2007 Test methods for weathering resistance of concrete surface coating materials 1. Scope This JSCE
START FROM TYPICAL PROBLEMS
Chapter I. START FROM TYPICAL PROBLEMS Small Land and Large Population 1 % of USA and Canada, 15% of German, 26% of Japan Undeveloped Industry In 1954,GNP was $US 70 with electricity capacity of 127 Mwe
Use of Advanced Digital Controls in NPP Applications
Use of Advanced Digital Controls in NPP Applications A Case Study and Application to U. S. NPP Retrofits 2006 1 Korea Hydro & Nuclear Power Co. Ltd. has been in the forefront of use of digital controls
Concrete Surface Preparation
Concrete Surface Preparation The MOST Important Factor for the Success of Coating and Lining Installations What is Surface Preparation? Mechanically or chemically preparing a substrate to an acceptable
COATING SPECIFICATION ELASTOMERIC POLYURETHANE PROTECTIVE COATING ON CONCRETE COATING SPECIFICATION: I1 ISSUE: 1 DATE: 12 DECEMBER 2012
1.0 SCOPE This document summarises the procedure for spray applying Elastomeric Polyurethane protective coatings (e.g. Polybrid, Polyurea ) onto concrete structures. Refer Design Standard, DS 95 (Standard
COATING SPECIFICATION ZINC RICH EPOXY PRIMER, EPOXY MASTIC COATING ON STEEL OR CAST IRON COATING SPECIFICATION: C3 ISSUE:2 DATE: OCTOBER 2016
1.0 SCOPE This document summarises the procedure for the application of 2 pack Zinc Rich Epoxy primer over-coated with 2 pack Epoxy mastic. Refer Design Standard, DS 95 (Standard for the Selection, Preparation,
Ultrasonic Response on Artificially Produced Fatigue Cracks in AISI 321 Austenitic Stainless Steel Weld
19 th World Conference on Non-Destructive Testing 2016 Ultrasonic Response on Artificially Produced Fatigue Cracks in AISI 321 Austenitic Stainless Steel Weld Ari KOSKINEN 1, Esa LESKELÄ 1 1 VTT - Technical
SECTION STRUCTURAL METAL FRAMING
SECTION 05100 STRUCTURAL METAL FRAMING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Structural steel framing including lintels, shelf angles, bearing plates, anchor bolts and other items as shown on
The world s first commercial LNG fuel tank made of high manganese austenitic steel
The world s first commercial LNG fuel tank made of high manganese austenitic steel Jiwon Yu 1), Kihwan Kim 1), Do-Won Seo 1), Sung Tae Yun 1), Geon Shin 1), Hyun Kug Lee 2) 1) POSCO 2) Ilshin Marine Transport
375 Seosuk-dong, Dong-Gu, Gwangju, , Korea Phone: , Fax:
7th World Conference on Nondestructive Testing, -8 Oct 8, Shanghai, China Estimation of wall thinning defect size and location in pipes by Laser Speckle Interferometry Koung-suk KIM, Su-ok JANG, Jong-hyun
Steel Inspection Tips for Every Building Owner and Contractor
October 2017 - Newsletter Steel Inspection Tips for Every Building Owner and Contractor Structural steel is one of the strongest and most enduring building materials if assembled properly and maintained
This report describes a series of actions carried out by the government of the Republic of Korea
This report describes a series of actions carried out by the government of the Republic of Korea (ROK) in order to implement the obligations of Contracting Party imposed by Article 6 - Article 19 of the
UAE Selects Korea Electric Power Corp. Team as Prime Contractor for Peaceful Nuclear Power Program
UAE Selects Korea Electric Power Corp. Team as Prime Contractor for Peaceful Nuclear Power Program 27/12/2009 - WAM - Emirates News Agency http://www.wam.ae/servlet/satellite?c=page&cid=1135099399988&pagename=
Spent Fuel Management and Research Activities in Korea
Spent Fuel Management and Research Activities in Korea 33 rd Spent Fuel Management Seminar (January 23 ~ 25, 2018, Alexandria, VA) Woo-seok Choi Director of RAM Transport and Storage Dep t Contents 1.
Special Specification 4038 Zinc Cathodic Protection System
Special Specification 4038 Zinc Cathodic Protection System 1. DESCRIPTION Furnish, install, and energize a sacrificial zinc anode cathodic protection system to bent caps, tie beams, concrete walls and
DESIGN STANDARDS WASHINGTON UNIVERSITY SCHOOL OF MEDICINE
SECTION 01 43 29 (00041) SPECIAL INSPECTIONS PART 1 GUIDELINES As defined by the IBC 2003, Section 1704, Special Inspections of materials, installation, fabrication, erection of components and connections
MATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 2471 November 2016 MATERIAL SPECIFICATION FOR SECTIONAL STEEL HIGH MAST LIGHTING POLES TABLE OF CONTENTS 2471.01 SCOPE 2471.02 REFERENCES 2471.03
Tnemec Fluid Applied Thermal Break Long Form Specification
PART 1 GENERAL 1.01 DESCRIPTION Tnemec Fluid Applied Thermal Break Long Form Specification A. This specification covers labor, materials, equipment, and application necessary for, and incidental to, the
Integrity Evaluation for Elbows based on TES Collapse Load
IAEA-CN-164-4P01 Integrity Evaluation for Elbows based on TES Collapse Load Sung-Ho Lee a, Chi Yong Park a, Tae Ryong Kim a and Jai-Hak Park b a Korea Electric Power Research Institute, Daejeon, Korea
Corrosion Prevention by Protective Coatings
Corrosion Prevention by Protective Coatings Third Edition Charles G. Munger Louis D. Vincent, Ph.D. Printed in the United States of America. ISBN 1-57590-262-1 Reproduction of contents in whole or part
REQUIREMENTS, CODE AND STANDARD OF PAINT AS COMPONENT PROTECTION LAYER FOR REAKTOR DAYA EKSPERIMENTAL
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 10, October 2018, pp. 1585 1592, Article ID: IJMET_09_10_161 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=10
MATERIAL SPECIFICATION FOR EPOXY COATED REINFORCING STEEL BARS FOR CONCRETE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1442 NOVEMBER 2007 MATERIAL SPECIFICATION FOR EPOXY COATED REINFORCING STEEL BARS FOR CONCRETE TABLE OF CONTENTS 1442.01 SCOPE 1442.02 REFERENCES 1442.03
2012 VIRGINIA TECH SCHEDULE OF SPECIAL INSPECTIONS
2012 VIRGINIA TECH SCHEDULE OF SPECIAL INSPECTIONS HECO-6 GENERAL Pre-construction conference Preconstruction meeting Scheduled by SI with the Contractor, UBO, A/E, and relevant subs prior to commencement
STRUCTURAL MASONRY SPECIAL INSPECTOR. Study Guide
STRUCTURAL MASONRY SPECIAL INSPECTOR Study Guide May 2017 Examination: The Structural Masonry Inspector Examination is based on the references cited in this document. It is 3 hours in length, is an open-book
SUPPLIER QUALITY ASSURANCE REQUIREMENTS
The following supplier quality assurance requirements, referenced by number on the Purchase Order, are an integral part of each order placed by Groth Corporation or Groth Continental Manufacturing Private
The Importance of Proper Inspection. Rocky Capehart
The Importance of Proper Inspection Rocky Capehart How Do We Help Prevent: PROPER INSPECTION All of the below should be performed as specified in the contract documents: product specified is being used,
Wood County Building Inspection
Wood County Building Inspection Michael J. Rudey, Chief Building Official Statement of Special Inspections (Section 1704 Ohio Building Code) Project File Number: Project Name: Project Location: Building
A. Section includes Sprayed Fire-Resistive Materials: (SFRM) A. Pre-Installation Conference: Conduct conference at Project Site.
SECTION 078100 - APPLIED FIREPROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Amendments to General Conditions and Division 01 Specification
Integrated Regulatory Infrastructure Support Service (IRISS)
Integrated Regulatory Infrastructure Support Service (IRISS) Jinho Lee (peacelee@kins.re.kr) Head of Global Nuclear Safety Infrastructure Dept. Korea Institute of Nuclear Safety Daejeon, Korea November
Specification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
SECTION WELDING
SECTION 05050 WELDING PART 1 GENERAL 1.1 REFERENCES A. The following is a list of standards which may be referenced in this section: 1.2 DEFINITIONS 1. American Society of Mechanical Engineers (ASME):
BRIDGE REFURBISHMENT CAPABILITY
BRIDGE REFURBISHMENT CAPABILITY Conformance. Compliance. Reassurance ABOUT US Incospec Global Field Services have been providing expert consultancy in the field of Corrosion Engineering to all corners
THE ROLE OF NUCLEAR EDUCATION AND TRAINING IN KOREA
THE ROLE OF NUCLEAR EDUCATION AND TRAINING IN KOREA B.J. Min, K.W. Han and E.J. Lee Korea Atomic Energy Research Institute (KAERI), Daejeon, Korea E-mail address of main author: bjmin@kaeri.re.kr 1. HISTORICAL
SUPPLIER QUALITY ASSURANCE REQUIREMENTS (SQAR)
The following supplier quality assurance requirements, referenced by number on the Purchase Order, are an integral part of each order placed by or Groth Continental Manufacturing Private Limited. Compliance
SECTION COLD-FORMED METAL TRUSSES
SECTION 054400 COLD-FORMED METAL TRUSSES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Development Status of Dismantling Technology for Old Steam Generator & RV in Kori unit 1
Development Status of Dismantling Technology for Old Steam Generator & RV in Kori unit 1 2016. 8. Doosan Heavy Industries & Co. Ltd Research Institute Kwang Soo Park 1 Doosan Experience 2 Development of
PREQUALIFICATION YONGKWANG FLEXIBLE IND. CO., LTD.
PREQUALIFICATION YONGKWANG FLEXIBLE IND. CO., LTD. 1 Content 1. Company Introduction 2. General Information 3. Company History 4. Organization 5. Quality Assurance 6. Certificates 7. Main Products 8. Application
Geological Disposal Option and Institutional Issues
Geological Disposal Option and Institutional Issues Mar. 2011 SONG, MYUNG JAE Korea Radioisotope Association Contents 1Ⅰ Example ofclick Disposal to add Site Title Acquisition 1Ⅱ 1Ⅲ 1Ⅳ Ⅴ 1 HLW Disposal
COATING SPECIFICATION HIGH BUILD EPOXY COATING ON BUTTERFLY VALVES COATING SPECIFICATION: D2 ISSUE: 2 DATE: FEBRUARY 2016
1.0 SCOPE This document summarises the procedure for the application of a 2 pack High Build Epoxy Coating, with > 80% volume solids, on steel or ductile iron butterfly valves. Refer Design Standard, DS
Development of Integrity Evaluation Program for Pipe Wall Thinning
20th International Conference on Structural Mechanics in Reactor Technology (SMiRT 20) Espoo, Finland, August 9-14, 2009 SMiRT 20-Division 8, Paper 2071 Development of Integrity Evaluation Program for
MATERIALS TEST LABORATORY
MATERIALS TEST LABORATORY Fundamental component of Development and Marketing Strategy A Collection of dedicated Laboratories & Testing Cells World Class facility for testing and demonstration Simulate
AWS C2.23M/C2.23:2003, NACE No. 12, SSPC-CS An American National Standard
AWS C2.23M/C2.23:2003, NACE No. 12, SSPC-CS 23.00 An American National Standard Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites
Kinetic Metallization Repair of IVD Aluminum. Military Applications - Session 1 24 May, 2012 Ralph Tapphorn, H. Gabel, K. Hashimoto, and T.
Kinetic Metallization Repair of IVD Aluminum Military Applications - Session 1 24 May, 2012 Ralph Tapphorn, H. Gabel, K. Hashimoto, and T. Crowe Overview Aerospace Repair Applications Kinetic Metallization
A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents.
POLYURETHANE COATING ON STEEL PIPE PART 1 -- GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. 1.2 REFERENCE SPECIFICATIONS,
Overview of Environmental Impact Assessment in Korea
Overview of Environmental Impact Assessment in Korea jymoon@kins.re.kr Jong Yi MOON Korea Institute of Nuclear Safety Table of Content 1. Current Status of NPP in Korea 2. Overview of EIA System in Korea
IGS-C-TP-010-Amnd2 Oct IGS. Iranian Gas Standards -(./ !" # 3 % % 2 '(!)*+ Amendment No. 2 to Three Layer Polyethylene Coating System
IGS-C-TP-010-Amnd2 Oct. 2009 APPROVED IGS Iranian Gas Standards -(./011 24!" # 2 '(!)*+ Amendment No. 2 to Three Layer Polyethylene Coating System. Fax:(9821)-811-69 //01 2406 8/9:;?=9/ @:A0B
PART 1 / GENERAL SECTION ALUMINUM PLATE PANEL SYSTEM. ALPLY Insulated Panels. Alply TECH WALL Aluminum Plate System 2002
SECTION 07 42 13 ALUMINUM PLATE PANEL SYSTEM ALPLY Insulated Panels Alply TECH WALL Aluminum Plate System 2002 PART 1 / GENERAL 1.1 SYSTEM DESCRIPTION A. Preformed Aluminum Plate System for Screen wall
Special Inspector Examinations (continued)
Special Inspector Examinations (continued) 84 Structural Masonry Special Inspector 90 multiple-choice questions Exam fee: $210 Two-part examination; passing score on both parts is required. Open book 3-1/2-hour
Construction Management/Construction Inspection Services
DELAWARE RIVER JOINT TOLL BRIDGE COMMISSION ADMINISTRATION BUILDING 110 WOOD & GROVE STREETS MORRISVILLE, PA 19067 ADDENDUM NO. 1 This Addendum No. 1 gives additional information in connection with the
RT PTS RE EVALUATION OF KORI 1 RPV BELTLINE WELD BY MASTER CURVE TESTS
RT PTS RE EVALUATION OF KORI 1 RPV BELTLINE WELD BY MASTER CURVE TESTS B.S. Lee a. J.H. Hong a, D.H. Lee b and D.G. Choi b a Korea Atomic Energy Research Institute (KAERI), Korea b Korea Hydro & Nuclear
Inspection and Welding Repairs of Pressure Vessels
Inspection and Welding Repairs of Pressure Vessels BY S. V. GUPTE B.E., D.M.E. ASNT LEVEL III - RT,MT,PT,VT PRESSURE VESSEL INSPECTOR (API 510), (CCOE) PAINT AND COATING INSPECTOR (NACE INDIA) LEAD AUDITOR
SECTION STRUCTURE MOUNT RAILING SYSTEM
SECTION 05520 STRUCTURE MOUNT RAILING SYSTEM Peak Fall Protection specializes in the design, engineering, fabrication, installation, and certification of fall protection safety systems. Our team of safety
Protective Industrial Polymers - USA Manufacturer s Specification February 11, 2015
This specification covers InhibiChem SR-GF-L Enhanced Chemical and Solvent-Resistant Glass-Flake Reinforced Steel Tank Lining System. This system consists of a vinyl ester primer, and two troweled coats
MEASUREMENT OF DEFECT DEPTH IN SHEET METAL BY PULSE THERMOGRAPHY
MEASUREMENT OF DEFECT DEPTH IN SHEET METAL BY PULSE THERMOGRAPHY Soo-Yong Choi 1, Jae-Yeon Kim 1, Min-Jung Park 1, Jai-Won Park 2, Won-Sik Lee 3, Jai-Won Byeon 1* 1 Department of Materials Science & Engineering,
Accreditation of Hot Tap Organizations
Accreditation of Hot Tap Organizations TSSA Guide for Survey Teams Technical Standards & Safety Authority Boiler & Pressure Vessels Safety Division 3300 Bloor Street West 14 th Floor, Centre Tower, Etobicoke,
Improving Efficiency with Encapsulated Media Blasting. Presenter:
Improving Efficiency with Encapsulated Media Blasting Presenter: Why Do Coatings Fail? Protect What s Important 5% 10% Surface Preparation Coating 75% 8% 2% Wrong Coating Selection Wrong Application Environmental
Special Provision No. 911F04 March 1997
COATING STEEL RAILING SYSTEM(S) - Item No. Special Provision No. 911F04 March 1997 Definitions, Elimination of Pre-Start Material Sample, Material Requirements, Operational Constraints, Time Between Surface
SECTION CORROSION PROTECTION FOR CONCRETE STRUCTURES
0590-104217 PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 09850 CORROSION PROTECTION FOR CONCRETE STRUCTURES A. This specification covers work, materials and equipment required for protecting the interior
2017 Water Reactor Fuel Performance Meeting September 10 (Sun) 14 (Thu), 2017 Ramada Plaza Jeju Jeju Island, Korea
Extended Storage Collaboration Program for Addressing Long-Term Dry Storage Issues Hatice Akkurt 1 1 Electric Power Research Institute (EPRI), 1300 W WT Harris Blvd, Charlotte, NC 28262, hakkurt@epri.com
Is this still an Interior Lining?
Is this still an Interior Lining? Heather Peters Missouri Department of Natural Resources Heather.Peters@dnr.mo.gov New Federal Language 280.21 Installed in accordance with 280.33 Inspected on 10/5 year