Certified according to DIN EN ISO 9001:2008 Accredited according to DIN EN ISO/IEC 17025:2005
|
|
- Cordelia Simon
- 6 years ago
- Views:
Transcription
1 Viscosity Length equipment Electricity Pressure ph Volume Gauge blocks Mass Electrolyt. conductivity ZMK ANALYTIK- GmbH Density Humidity ZMK GmbH Temperature Time / frequency Torque Balances Certified according to DIN EN ISO 9001:2008 Accredited according to DIN EN ISO/IEC 17025: Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
2 Contact The companies with the calibration laboratory -K ZMK GmbH Sachsen-Anhalt ZMK -ANALYTIK- GmbH 2 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
3 Introduction Zentrum für Messen und Kalibrieren GmbH P-D ChemiePark Bitterfeld-Wolfen 3 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
4 Filmfabrik Wolfen (Agfa), Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
5 Accreditation extension of the DKD-K up to 2010 Mechanical, thermodynamic and electrical measuring quantities 5 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
6 Accreditation extension of the DKD-K up to 2010 Analytical electrochemical measuring quantities 6 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
7 ZMK today Our Location Version by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
8 ZMK GROUP Calibration Laboratory DKD-K Calibration Manufacturing ZMK GmbH Electricity Pressure Torque Mass Density / volume of weights Balances Temperature Humidity Dimensional / Gauge Blocks Length measuring equipment ZMK -ANALYTIK- GmbH Viscosity ph (standard calibration) Liquid density (standard calibration) Electrolytic conductivity Volume measuring devices Management of Equipment on behalf of our customers 8 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
9 ZMK -ANALYTIK- GmbH Calibration Laboratory DKD-K Calibration Manufacturing Newtonian Standard Specimen of Viscosity ph reference materials ph reference buffer solutions Reference solutions for electrolytic conductivity Density reference liquids 9 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
10 Our customers Industry (various branches): Automobile industry Companies performing mechanical manufacturing Chemical industry Pharmaceutical industry Petroleum industry Food and beverage industry 10 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
11 Our customers Laboratories and Institutes: Testing laboratories (ISO/IEC 17025) Universities and scientific institutes National Metrology Institutes 11 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
12 Physikalisch-Technische Bundesanstalt Fundamental research and development work in the field of metrology Realization, maintenance and dissemination of the legal units of the SI Metrology for the area regulated by the law and for industry Ensures comparability and reliability of measurement results everywhere in the world Key Comparisons Metrological competence on international level Research in Analytics Organization of Interlaboratory Comparisons Deutscher Kalibrierdienst Calibration of measurement instruments and material measures within the accreditation scope Provide traceability to national standards Increase customer s confidence and competitiveness on the national and international markets Interlaboratory Comparisons 12 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
13 The role of metrology in industry Quality assurance in industry and analytics is based on ISO 9001 Measurement, analysis and improvement... to declare the conformity of products ISO 9001 Quality Management Systems Control of monitoring and measuring devices... calibrated or verified at specific intervals against standards traceable to international or national standards 13 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
14 The role of metrology in industry Requirements to Equipment ISO/IEC 17025: 2005 General requirements for the competence of testing and calibration laboratories 5.5 Equipment 5.6 Measurement traceability ISO 9001 Quality management systems Requirements 7.6 Control of monitoring and measuring devices ISO Requirements for measurement processes and measuring equipment ISO / TS Quality management systems... for the automotive industry (IATF) 7.6 Control of monitoring and measuring devices ISO Guide Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
15 The role of metrology in industry The DKD and the DKD calibration laboratories serve as a metrological basis for the control of measurement and test equipment within the framework of quality management in industry. Unbroken chain of calibrations or comparisons 15 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
16 The role of metrology in industry SI National Standard Wave length standard (frequency-stabilized laser) Reference Standards Working Standards Measuring devices (items to be calibrated ) Example: Vernier calliper 16 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
17 Customer Benefit Quality of the production is ensured by: Calibration with: Certificate; DKD on demand Measurement uncertainty Management of measuring and test equipment (data base) Services also provided on-site at the customer or in our mobile laboratory Consulting / Training Norm conformity fulfilled 17 Version 2.3 by ZMK GmbH Sachsen-Anhalt / ZMK -ANALYTIK- GmbH
From purpose based interpretation to appropriate application of Calibration and Interlaboratory comparison results
From purpose based interpretation to appropriate application of Calibration and Interlaboratory comparison results Mulugeta Derebew mulugetaderebew@yahoo.com Test & Measurement 2017, Conference and Workshop,
More informationISO and SANAS guidelines for use of reference materials and PT scheme participation. T & M Conference
ISO 17025 and SANAS guidelines for use of reference materials and PT scheme participation T & M Conference Presentation layout 1. Introduction ISO/IEC 17025 2. Requirements for use Reference Materials
More informationCRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES Approved By: Chief Executive Officer: Ron Josias Senior Manager: Mpho Phaloane Reviewed By: Field
More informationDevelopment of a metrology system difference between legal metrology and industrial metrology
COOPERATION IN METROLOGY: Development of a metrology system difference between legal metrology and industrial metrology Manfred Kochsiek Metrology Consultant 1 My professional background Mechanical engineer,
More informationThe American Association for Laboratory Accreditation
Page 1 of 5 I. Description of the Optional Requirements 1.0 Scope 1.1 This document describes the requirements for calibration laboratories seeking, in addition to A2LA accreditation for ISO/IEC 17025,
More informationA61-01 CALA Traceability Policy Revision 3.2 September 16, 2016
A61-01 CALA Traceability Policy Revision 3.2 September 16, 2016 PAGE II TABLE OF CONTENTS TABLE OF CONTENTS... 1 CALA TRACEABILITY POLICY... 2 1.0 SCOPE... 2 2.0 BACKGROUND... 2 3.0 DEFINITIONS... 3 4.0
More informationAPPENDIX H TRACEABILITY OF MEASUREMENT
APPENDIX H TRACEABILITY OF MEASUREMENT Table of Contents 1. SCOPE... 2 2. REFERENCES... 2 3. TERMS AND DEFINITIONS... 2 4. BACKGROUND... 6 5. TRACEABILITY OF MEASUREMENT POLICY... 7 7. GUIDANCE ON IMPLEMENTING
More informationTRACEABILITY OF MEASUREMENT RESULTS IN INDUSTRIAL METROLOGY
TRACEABILITY OF MEASUREMENT RESULTS IN INDUSTRIAL METROLOGY Michael Kühne, Michael Krystek, Andreas Odin Physikalisch-Technische Bundesanstalt Bundesallee 100, 38116 Braunschweig, Germany phone: +49/531/592-3000,
More informationMeasurement uncertainty: Requirements set in the accreditation standards
Measurement uncertainty: Requirements set in the accreditation standards Kyriacos C. Tsimillis Pancyprian Union of Chemists Division of Quality Assurance Accreditation standards ISO/IEC 17025 (2005) General
More informationILAC P10 TRACEABILITY
ACTIVITY 1.3 TRAINING SESSION FOLLOWING THE FINDINGS FROM PREVIOUS ACTIVITIES: ILAC P10 TRACEABILITY Maria Pia Toni Slide 1 of XX REFERENCE ILAC P10:2013 ILAC Policy on the Traceability of Measurement
More informationAnnex to the Accreditation Certificate D-K according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15209-01-00 according to ISO/IEC 17025:2005 Period of validity: 16.05.2018 to 15.05.2023 Date of issue: 16.05.2018 Holder
More informationProcedure for Equipment Calibration and Maintenance
Procedure for Equipment Calibration and Maintenance 1.0 Purpose This procedure specifies the schedule and requirements for calibration, performance verification, and maintenance of State Crime Laboratory
More informationSpecific Accreditation Criteria Materials ISO/IEC Annex. Cement testing
Specific Accreditation Criteria Materials ISO/IEC 17025 Annex Cement testing January 2018 Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by copyright
More informationA016 Traceability of measurement results compared to national and international measurement standards
08.04.2016 Version 08 Page 1 de 9 A016 Traceability of measurement results compared to national and international measurement standards Modifications: p 2 South Lane Tower I 1, avenue du Swing L-4367 Belvaux
More informationPresented By: Matt Sica
FQS Accreditation for forensic testing agencies Presented By: Matt Sica ANSI-ASQ National Accreditation Board Implies an unbroken path to a higher level of accuracy or authority. Characterized by a number
More informationNATA Policy on Calibration and Measurement Traceability
NATA Policy on Calibration and Measurement Traceability Paul McMullen Sector Manager, Calibration This Session 1. VIM Definitions Calibration and Metrological Traceability 2. Previous Policy on Metrological
More informationPS5 Policy on Measurement Traceability Issue 7 June 2018 Page 1 of 5
Policy on Measurement Traceability PS5 1) Purpose This Statement outlines INAB policy on traceability of measurement for laboratories accredited to ISO 17025, ISO 15189 and inspection bodies accredited
More informationNuclear Reference Materials
Nuclear Reference Materials 1. Objective The objective of this technical sheet is to describe nuclear reference materials, their applications and usefulness in safeguards applications, and their evolution
More informationSam Chappell, CIML Honorary Member, USA
22 OPPORTUNITIES AND FUTURE TRENDS IN LEGAL METROLOGY CONTROL OF MEASURING INSTRUMENTS Sam Chappell, CIML Honorary Member, USA Introduction Currently, legal metrology control generally includes type evaluation
More informationPolicy on Measurement Traceability
Policy on Measurement Traceability Date of Issue: January 1, 2006 Voluntary EMC Laboratory Accreditation Center, Inc. (VLAC) This document is copyrighted under the Copyright Act. Unauthorized reproduction,
More informationAmerican Association for Laboratory Accreditation
Page 1 of 14 The following pages present R205 Specific s: Calibration Laboratory Accreditation Program (dated September 2005) in checklist format. All laboratories seeking accreditation in the Calibration
More informationTECHNICAL REQUIREMENTS (CLAUSE 5)
LECTURE 4 THE ELEMENTS OF ISO/IEC 17025 - TECHNICAL REQUIREMENTS (CLAUSE 5) Slide 1 ISO 17025 - RELATIONSHIP OF EACH REQUIREMENTS Management System Organization Quality system Continual Improvement Management
More informationILAC Policy on Traceability of Measurement Results
ILAC Policy on Traceability of Measurement Results ILAC-P10:2002 Copyright ILAC 2002 ILAC encourages the authorised reproduction of its publications, or parts thereof, by organisations wishing to use such
More informationGuidelines for the monitoring and reporting of the operation of quality systems by RMOs
Guidelines for the monitoring and reporting of the operation of quality systems by RMOs Version 3 Contents Title Page 1. Introduction... 1 2. Review Guidelines... 1 3. Requirements for the QS... 3 3.1.
More informationISO 15189:2012 and Susceptibility Testing BSAC User Day 22 June 2016
Martin Stearn, UKAS Senior Assessment Manager ISO 15189:2012 and Susceptibility Testing BSAC User Day 22 June 2016 UKAS June 2016 Objectives Discuss the various clauses within the ISO 15189:2012 Standard
More informationMeasurement Traceability
Measurement Traceability NANDTB Aircraft Inspection and Maintenance Seminar Oct 2017 Brett Hyland Sector Manager, Infrastructure This Session Aims to explain Traceability represents a process of comparison
More informationProcedure for Biomedical Equipment Calibration and Maintenance
Procedure for Biomedical Equipment Calibration and Maintenance 1.0 Purpose This procedure specifies the schedule and requirements for calibration, performance verification, and maintenance of Biomedical
More informationTECHNICAL AND PRODUCTION REQUIREMENTS of ISO Guide 34:2009
SANAS Accr. No/s. TECHNICAL AND PRODUCTION REQUIREMENTS of ISO Guide 34:2009 Date/s of evaluation Assessor/s & Observers Facility Area / field of Representative operation This report covers the following:
More informationSCC Requirements and Guidance for Calibration and Measurement Traceability in Testing Laboratories
Accreditation Services SCC Requirements and Guidance for Calibration and Measurement Traceability in Testing Laboratories 2017-07-06 Standards Council of Canada 55 Metcalfe Street, Suite 600 Ottawa, ON
More informationApplication of ISO/IEC 17025
Application of ISO/IEC 17025 A Testing Perspective Colleen M. Cotter, Accreditation Manager Outline An overview of CALA Application of ISO/IEC 17025 Specific requirements for Testing Laboratories (5.6.2.2)
More informationFQS Accreditation for forensic testing agencies NEMC ANSI-ASQ National Accreditation Board
FQS Accreditation for forensic testing agencies ISO Guide d 34 for f Environmentall Labs b NEMC 2012 ANSI-ASQ National Accreditation Board ISO/IEC 17025 Calibration and Testing Labs ISO/IEC 17020 Inspection
More informationBeamex. Calibration White Paper. Metrological Traceability in Calibration Are you traceable?
Beamex Calibration White Paper info@beamex.com Metrological Traceability in Calibration Are you traceable? Metrological Traceability in Calibration Are you traceable? What is metrological traceability
More informationPreparation Approval Authorisation Application date. Directive Council The President
Title Proficiency Testing Reference RT-24 Revision 02 Date 2015-10-27 NOTE: The present document represent the English version of document under reference at the specified revision. In case of conflict
More informationGuidance on Uncertainty for Testing Laboratories
Guidance on Uncertainty for Testing Laboratories May 10, 2012 The purpose of this guidance document is to establish guidance on traceability and measurement uncertainty requirements for all testing laboratories
More informationChecklist for assessment of Metrological Traceability and Measurement Uncertainty of calibration laboratories NC NA
Calibration Laboratory Name: Address: Laboratory representative: Telephone: Place of assessments(specific cal.lab) Assessment Dates: Assessor(s): Technical expert(s) Assessment Type Requirements Calibration
More informationILAC-P10:2002. ILAC Policy on Traceability of Measurement Results
ILAC-P10:2002 ILAC Policy on Traceability of Measurement Results Copyright ILAC 2002 ILAC encourages the authorised reproduction of its publications, or parts thereof, by organisations wishing to use such
More informationPolicy on the Traceability of Measurement Results
Page 1 of 14 Reviewed by: Getnet Tsigemelak Position: Deputy Director General Signature: Approved by: Araya Fesseha Position: Director General Signature: Contents pages 1. Purpose and scope... 2 2. References...
More informationGeneral Accreditation Criteria Equipment assurance, in-house calibration and equipment verification
General Accreditation Criteria Equipment assurance, in-house calibration and equipment verification January 2018 Copyright National Association of Testing Authorities, Australia 2009 This publication is
More informationA Primer on Reference Materials Matthew Sica Environmental Program Manager
A Primer on Reference Materials Matthew Sica Environmental Program Manager Overview Related Standards Definitions and types of RMs Data Supporting RMs Use of RMs 2 RM Related Standards ISO Guide 30 Vocabulary
More informationGeneral Requirements for the Competence of Testing and Calibration Laboratories
ISO 17025:2005 POSITION PAPER General Requirements for the Competence of Testing and Calibration Laboratories EXECUTIVE SUMMARY This position paper provides a high-level overview of how LabVantage supports
More informationISO/IEC 17025:2017 Working Document Instruction Page
Instruction Page NOTES: 1. This working document is intended as a checklist for the assessor when conducting Testing and Calibration Laboratory and Sampling Organization Assessments according to ISO/IEC
More informationA2LA. P113a Policy on Reference Material Traceability for Life Sciences Testing Laboratories
Page 1 of 6 Introduction The Life Sciences Advisory Committee realizes that the traceability of reference materials (RMs) per the requirements of ISO/IEC 17025:2005 (Section 5.6.3) or ISO/IEC 17025:2017(Section
More informationCRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES Prepared by: Technical Manager Approved by: Chief Executive Officer Approval Date: 2017-08-10 Effective
More informationRules for accreditation of providers of proficiency testing/interlaboratory
Rules for accreditation of providers of proficiency testing/interlaboratory tests Scope: With this regulation the requirements for accreditations of providers of proficiency testing/interlaboratory tests/ring
More informationILAC-P10:01/2013 -Calibration-
ACTIVITY 1.4 TRAININGS OF MOLDAC PERSONNEL INVOLVED IN ACCREDITATION PROCESS INCLUDING THE ISSUE REGARDING THE REQUIREMENTS OF THE NEW VERSIONS OF THE EA, IAF, ILAC DOCUMENTS ILAC-P10:01/2013 -Calibration-
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD FDIS ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories Exigences générales concernant la compétence des laboratoires d'étalonnages et
More information06 Procurement Guideline
1 Preface The Hanomag Lohnhärterei Group (HLU), represented here by the Hanomag Härtecenter GmbH, offers a wide range of heat-treatment services, especially for steel- and aluminum- products. To deliver
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18265 Second edition 2013-10-01 Metallic materials Conversion of hardness values Matériaux métalliques Conversion des valeurs de dureté Reference number ISO 18265:2013(E) ISO
More informationIATF - International Automotive Task Force IATF 16949:2016 Frequently Asked Question (FAQ)
:2016 Frequently Asked Question (FAQ) :2016 1 st Edition was published in October 2016. In response to questions from the IATF recognized certification bodies and stakeholders, the following questions
More informationAmerican Association for Laboratory Accreditation
Page 1 of 28 R205: SPECIFIC REQUIREMENTS: CALIBRATION LABORATORY ACCREDITATION PROGRAM November 2012 2012 by A2LA All rights reserved. No part of this document may be reproduced in any form or by any means
More informationWELMEC European cooperation in legal metrology
WELMEC 8.6 Issue 1 WELMEC European cooperation in legal metrology Measuring Instruments Directive 2004/22/EC Presumption of Conformity of the Quality System of Manufacturers with Module D or H 1 when EN
More informationEstablishment of an Accredited Reference Measurement Laboratory
Establishment of an Accredited Reference Measurement Laboratory Francesco Dati, PhD IVD-Consulting Marburg / Germany E-mail: f.dati@t-online.de Quality of Analytical Systems Reference Measurement Systems
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-033 01 17/02/2016 17/03/2016 GUD 1 of 6 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
More informationAPLAC GUIDANCE ON REFERENCE MATERIAL USE AND PRODUCTION
APLAC GUIDANCE ON REFERENCE MATERIAL USE AND PRODUCTION Issue 6 Issue Date: 2018/02 Page 1 of 18 PURPOSE Reference Materials (RMs) are used in all stages of the measurement process, for method validation,
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-11 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen
More informationA comparison of the complimentary and different issues in ISO/IEC and OECD GLP
Accred Qual Assur (2003) 8:208 212 DOI 10.1007/s00769-003-0589-9 GENERAL PAPER Tina Engelhard Etty Feller Zahava Nizri A comparison of the complimentary and different issues in ISO/IEC 17025 and OECD GLP
More informationStandard Practices for Measurement Traceability in Forensic Toxicology
ANSI/ASB Standard 017, First Edition 2018 Standard Practices for Measurement Traceability in Forensic Toxicology This document is copyrighted by the AAFS Standards Board, LLC. 2018 All rights are reserved.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 FORENSIC TESTING SERVICES (FTS) 127 W. Grand River Avenue Williamston, MI 48895 Christopher Bommarito Phone: 517 202 5971 Website: www.forensic-testing.net
More informationWilmington Police Department Crime Laboratory Quality Management System Procedure Measurement Traceability and Uncertainty
1.0 Purpose This procedure describes how measurement traceability is maintained and measurement uncertainty is calculated and used within the laboratory. The laboratory uses annual equipment calibration,
More informationMAURITAS R3:2017 Issue No. 7:Revision 1 Date: November 2017 MAURITAS. Traceability of measurement. Mauritius Accreditation Service. Copyright MAURITAS
Issue No. 7:Revision 1 MAURITAS R3 Traceability of measurement Mauritius Accreditation Service Copyright MAURITAS CONTENTS FOREWORD... 2 ABOUT MAURITAS PUBLICATIONS... 2 1. PURPOSE... 3 2. SCOPE AND RESPONSIBILITIES...
More informationQA/QC to underpin the measurement cycle
QA/QC to underpin the measurement cycle Lisbon, 21 May 2014 - ACCREDIA 1 / 15 21 May 2014 ISO/IEC 17025:2005 5.9 Assuring the quality of test and calibration results 5.9.1 The laboratory shall have quality
More informationTraceability Exercise Documenting Vendor Evaluations and Calibration Certificate Review
Traceability Exercise Documenting Vendor Evaluations and Calibration Certificate Review Douglas Berg Testing Technical Program Mgr Perry Johnson Laboratory Accreditation PJLA NIST Traceability What is
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: San Nicolás de los Garza, Nuevo León, México. C.P.
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 17511 First edition 2003-08-15 In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators
More informationCalibrators: commutability, traceability and uncertainty
Calibrators: commutability, traceability and uncertainty René Dybkaer Afdeling for Standardisering i Laboratoriemedicin Hovedstadens Sygehusfællesskab H:S Frederiksberg Hospital Frederiksberg The main
More informationGuidelines for the assessment of the appropriateness of small interlaboratory comparisons within the process of laboratory accreditation
Publication Reference EA-4/21 INF: 2018 Guidelines for the assessment of the appropriateness of small interlaboratory comparisons within the process of laboratory accreditation PURPOSE This paper provides
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationBundesanstalt für Materialforschung und -prüfung (BAM) Pyrotechnics Division 2.3 Explosives D Berlin Berlin,
Bundesanstalt für Materialforschung und -prüfung (BAM) Pyrotechnics Division 2.3 Explosives D -12200 Berlin Berlin, 2015-09-04 Pyrotechnic Articles Directive 2013/29/EU Information on the Conformity Assessment
More informationEquipment In-house Calibration Requirements and use of Non-Accredited Calibration Service Providers
Issue 5.0: Provided additional clarification on record retention and non-conforming work with In- House calibration. Issue 6.0: Updated UL internal approvers only. No other changes. For Client Labs Purpose
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing
INTERNATIONAL STANDARD ISO/IEC 17043 First edition 2010-02-01 Conformity assessment General requirements for proficiency testing Évaluation de la conformité Exigences générales concernant les essais d'aptitude
More informationCertificate of Calibration
Page 1 of 9 Accurate Calibration & Repair 1924 Pinnacle Drive Aurora, IL 60504 Instrument Id: IT1609000001 Noun: Handheld Calibrator Mfr: ERO Electronic Accuracy: See manufacturer's specifications Reason
More informationThe role of accreditation bodies and EQA organisers in the. specifications
The role of accreditation bodies and EQA organisers in the assessment of analytical quality specifications Ian Mann Swiss Accreditation Service ian.mann@sas.ch Content Important partners and aspects of
More informationJDI Quality Assurance Guideline
JDI Quality Assurance Guideline For Supplier, 2017 Japan Display Inc. 7/1/2017 - Table of Contents - 1. Introduction... - 7-1.1. Purpose of this Guideline...- 8-1.2. Structure of this Guideline...- 8-1.3.
More informationLegal metrology under construction: new trends in Europe and Germany
Legal metrology under construction: new trends in Europe and Germany Dr. Peter Ulbig Department t Q.3: Legal Metrology and Technology Transfer Physikalisch-Technische Bundesanstalt, Germany 1 Physikalisch-Technische
More informationSampling for Assessment
Page of 4 208-0-6 Prepared by: Getnet Tsigemelak Position: Quality Manager Signature: Approved by: Araya Fesseha Position : Director General Signature: Contents: Page 0. Introduction.... Purpose and Scope...2
More informationBrinell Hardness Reference Blocks
0231 Brinell Hardness Reference Blocks Supplied With UKAS Certificates Of Calibration RUGGED PRECISION Laboratory accuracy under steelworks conditions Brinell Reference Blocks Foundrax have the best accredited
More informationREVISION OF ISO/IEC GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
REVISION OF ISO/IEC 17025 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES Presented August 10, 2017 to Environmental Measurement Symposium Warren Merkel, Co-convenor ISO/CASCO
More informationCertificate of Calibration
Page 1 of 9 Accurate Calibration & Repair 1924 Pinnacle Drive Aurora, IL 60504 Customer Information Instrument Identification Instrument Id: R051276 Location: R051276 Noun: Handheld Calibrator Model: Memocal
More informationWELMEC European cooperation in legal metrology
WELMEC 8.0 Issue 1 WELMEC European cooperation in legal metrology Measuring Instruments Directive 2004/22/EC Generalities on the Assessment and Operation of Notified Bodies performing Conformity Assessment
More informationOverview of Good Food Laboratory Practices
Overview of Good Food Laboratory Practices Dr. Anne Bridges Technical Director, AACC International International Workshop & Training Program On Good Food Laboratory Practices Jointly Organized By Food
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.018 Version 1 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationAnnex to the Accreditation Certificate D-ZM according to DIN EN ISO/IEC :2015
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZM-14143-01-00 according to DIN EN ISO/IEC 17021-1:2015 Period of validity: 10.04.2017 to 26.01.2021 Date of issue: 10.04.2017
More informationSampling for Assessment
Page of 4 208-0-6 Prepared by: Getnet Tsigemelak Position: Quality Manager Signature: Approved by: Araya Fesseha Position : Director General Signature: Contents: Page 0. Introduction.... Purpose and Scope...2
More information1. Quality Right First Time for product and services will ensure fulfillment of external and internal Customers satisfaction. 2. It is a coordinated a
1. Quality Right First Time for product and services will ensure fulfillment of external and internal Customers satisfaction. 2. It is a coordinated activity to direct and control an organization with
More informationIATF - International Automotive Task Force IATF 16949:2016 Frequently Asked Question (FAQ)
:2016 Frequently Asked Question (FAQ) :2016 1 st Edition was published in October 2016. In response to questions from the IATF recognized certification bodies and stakeholders, the following questions
More informationAmerican Association for Laboratory Accreditation
ISO 15189 Page 1 of 17 Accredited clinical laboratories are required to meet the following additional requirements as contained in P905 - A2LA Metrological Traceability Policy for ISO 15189 Laboratory
More informationThe new ISO/IEC 17025:2017
The new ISO/IEC 17025:2017 By Dr. George Anastasopoulos Director, Conformity assessment, IAS Email: ganastasopoulos@iasonline.org Introduction - Background information ISO/IEC 17025 was first issued in
More informationGeneral Accreditation Guidance. ISO/IEC 17025:2017 Gap analysis. April 2018
General Accreditation Guidance Gap analysis April 2018 Copyright National Association of Testing Authorities, Australia 2018 This publication is protected by copyright under the Commonwealth of Australia
More informationPage 1 (5) KBE EP (E) (E) EXAMINATION PROCEDURE
Page 1 (5) EXAMINATION PROCEDURE Type Inspection Certificate Quality and Identity Certificate Inspection Documentation Document Issue Date Supersedes KBE EP-180 2 (E) 2013-08-20 1 (E) 1 SCOPE This Examination
More informationSupersedes: G-16 (rev. 4); CEG The copy of this document located on Measurement Canada s website is considered to be the controlled copy.
Bulletin Category: GAS Bulletin: G-16 (rev. 5) Page: 1 of 14 The copy of this document located on Measurement Canada s website is considered to be the controlled copy. Recognition of test data from gas
More informationIATF - International Automotive Task Force IATF 16949:2016 Frequently Asked Question (FAQ)
:2016 Frequently Asked Question (FAQ) :2016 1 st Edition was published in October 2016. In response to questions from the IATF recognized certification bodies and stakeholders, the following questions
More informationIAF Mandatory Document. for the Audit and Certification of a Management System Operated by a Multi-Site Organization (IAF MD 1:2018)
IAF Mandatory Document IAF Mandatory Document for the Audit and Certification of a Management System Operated by a Multi-Site Organization Issue 2 (IAF MD 1:2018) Issued: 29 January 2018 Application Date:
More informationSpecification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry
Addendum 1 June 2010 Effective Date: December 1, 2010 Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry ANSI/API SPECIFICATION Q1 EIGHTH EDITION, DECEMBER 2007
More informationW W W.T E S T- F U C H S. C O M
Customer Kundendienst Support >Technischer >Technical support Support >Kalibrierung >Calibration >Schulungen >Training >Ersatzteilservice >Spare part service >Beauftragung >Contracts Remote-Support support
More informationIATF - International Automotive Task Force IATF 16949:2016 Sanctioned Interpretations
:2016 Sanctioned Interpretations 1 st Edition was published in October 2016 and was effective 1 January 2017. The following Sanctioned Interpretations were determined and approved by the IATF. Unless otherwise
More informationCertified Reference Material - Certificate of Analysis
Certified Reference Material - Certificate of Analysis S(+)-Methamphetamine, Primary Standard M-020 Page 1 of 7 Catalog Number: M-020 Lot: Expiration: Description: Packaging: Storage: Shipping: Intended
More informationcalibrate confidence with Accreditation What does accreditation actually mean? It s important to recognize this term for what
calibrate with confidence White Paper 17025 Accreditation What it is Why it's important What the requirements are to provide it Authored by Keith Bennett Director of Metrology Transcat Inc. July 2003/Revised
More informationStandardization, Quality Assurance, Metrology and Testings
THE EAST AFRICAN COMMUNITY STANDARDISATION, QUALITY ASSURANCE, METROLOGY AND TESTING ACT, 2006 ARRANGEMENT OF SECTIONS Sections Title 1. Citation and Commencement. 2. Interpretation. 3. Objects of the
More informationLaboratory Quality Assurance Manager & Laboratory Assessor RULES & HANDBOOK
EOQ Personnel Registration Scheme Laboratory Quality Assurance Manager & RULES & HANDBOOK Prepared by: Dr. Eugenia Soboleva, Quality Austria In accordance with the working group on EOQ product development
More informationSupplier Quality Survey. 1. Type of Business: g) Commodities supplied? Supplier Changes/comments: 2. Headcount breakdown by group: Purchasing
Supplier: Phone: Prime Contact/Title: Sales Contact/Title: Address: Fax: e-mail address e-mail address Quality Contact/Title: e-mail address 1. Type of Business: a) Number of years in business? b) Company
More information