Notice: All dimensions might be changed or modified, please refer to last updating specification.
|
|
- Mildred Hunter
- 6 years ago
- Views:
Transcription
1 Aluminum oused Power Resistor - A Series / 功率铝壳电阻 A Resistor Features - igh power rating, small size and ultra precision. - Standard winding & non-inductive winding types. - igh stability, strong construction. General Specification: - Wattage Range: 6 styles to choose ranging from 5 to 25 watts. - Resistance Tolerance: 1%, 5%, 3%, 2%, 1%,.5%. - Operating Temperature Range : -55% to +275 C - Dielectric Strength: A-5 A-1 A-25 V A-5 15V Aluminum oused Power Resistor Standard Electrical Specification MIL 25 C Rated Power (W) Resistance Range (Ω) Industry Military ±.5%, ±.1% ±.25% ±.5% ±1%,±5%,±1% A-5 RE6G ~51Ω.5~1.5K.1~1.2K.1~3.32K A-5N RE6N ~Ω 1.~2Ω 1.~86Ω 1.~1.65K A-1 RE65G ~1.2K.5-2.7K.1~2.7K.1~5.62K A-1N RE65N ~86Ω 1.~1.2K 1.~1.2K 1.~2.8K A-25 RE7G ~2.7K.1~3.9K.1~3.9K.1~12.1K A-25N RE7N ~1.2K 1.~2.7K 1.~2.7K 1.~6.4K A-5 RE75G 5 3.5~3.9K.1~5.6K.1~5.6K.1~39.2K A-5N RE75N ~2.7K 1.~3.9K 1.~3.9K 1.~19.6K A- RE77G 75 1.~5.6K.1~8.2K.5~12K.5~29.4K A-N RE77N 75 1.~3.9K 1.~5.6K 1.~5.6K 1.~14.7K A-25 RE8G ~12K.1~27K.1~27K.1~35.7K A-25N RE8N ~5.6K 1.~8.2K 1.~8.2K 1.~17.4K Aluminum oused Power Resistor Performance Parameters Test Conditions Specifications Short Time Over Load 5 wattage rating-5sec. Δ R±(.5%+.5Ω)Max. Moistrue Resistance temp 4 C moisture 95% DC V 5r Δ R±(.5%+.5Ω)Max. Moisture Load Life temp 4 C moisture 95% 1/1 wattage rating (1.5r on-.5r OFF)- Repeat r Δ R±(.5%+.5Ω)Max. Load Life Load Rating (chassis mounted) (1.5our on.5our OFF) Repeat ours Δ R±(1.5%+.5Ω)Max. Vibration 1c/s~5c/s~1c/s(1Min)-2ours each of paralleled and right angle Δ R±(.2%+.5Ω)Max. eat Resistance 275 C 2ours Δ R±(.5%+.5Ω)Max. Dielectric Strength A-5 A-1 A-25 V Δ R±(.5%+.5Ω)Max. A-5 15V A- A-25 25V Insulation Resistance Under the same test condition of Dielectric Strength, MΩMin. Load DC5V and measure the Insulation R. Terminal Strength (1)Pull Test (3 sec Min) A-5 1kg, A-1 2.3kg, A-25, A-5 4.5kg (2)Torque Test(5~15sec) A- 27kg-cm, A-25 36kg-cm Δ R±(.2%+.5Ω)Max. 1 of 6
2 Surface Temperature Versus Power Load (on Chassis) Deratning TEMP.( C) % OF RATED POWER A-25 A- A-5 A-25 A-1 A-5 %OF Rated Power A C ALUMINUM CASSIS AMIENT TEMP( C) Derating is required to reduce chassis ounting area and for high ambient temperatures. Curves: A=5 & 1 watt unites, unmounted.=25 watt units, unmounted.c=5, & 25 watt units, unmounted. Materials Encapsulant : Silicone End caps : Stainless steel Core : Ceramic steatite or alumina ousing : Aluminum with hard anodic coating Element : Copper-nickel alloy, nickel-chrome alloy or manganese copper Standard Terminals : 5~5W Tinned terminals, ~25W Threaded terminals. A Resistor Dimensions - A-5, 1, 15, 5, A-5N 1N, 15N, 5N ΦM D C A P ΦN F E T G K ΦL Dimensions(mm) A C D E F G J K L M N P ± 1. ± 1. ± 1. ± 2. ± 1. ± 1. ± 1. ±.8 ± 1. ±.8 ±.5 ±.5 ±.2 ±.8 A A A A of 6
3 A Resistor Dimensions - A -, A - N 2-Φ4.8±.5 46±1. M5 13±.8 M5 57.2± ± ±1. 7.5±1. 7±1. 89±1. 139±2 4.8± ±.8 A Resistor Dimensions - A - 25, A - 25N M6 76±1. 4-Φ4.8±.5 54±1. 14±.8 M ±1. 177±2 64±1. 76±1. 6.4± ± ±1. ow to Order A5 / AN 5W 2R D Product Rated Wattage Resistance Value (Ω) Resistance Tolerance 3 of 6
4 Aluminum oused Power Resistor Standard Electrical Specification Wattage Rating (W) Resistance Range (Ω) A Inductive AN Non-inductive Max. Working (V) A Inductive AN Non-inductive Proper heat sink (Aluminum chassis) A-25L 25.12~15K.2~5.5K *127*51*1t A-5L 5.1~4K.2~12K *35*1.5t A-15NL 15.4~5K.12~25K *35*3t A-15ANL 15.4~5K.12~25K *35*3t Aluminum oused Power Resistor Performance Parameters Test Conditions Specifications Short Time Over Load 5 wattage rating-5 sec. Δ R±(2%+.1Ω) Max. Moistrue Resistance Temp 4 C moisture 95% DC V 5r Δ R±(1%+.1Ω) Max. Moisture Load Life Temp 4 C moisture 95% 1/1 wattage rating (1.5r on-.5r OFF) - Repeat 2r Δ R±(1%+.1Ω) Max. Load Life Load Rating (chassis mounted) (1.5our on.5our OFF) Repeat ours Δ R±(5%+.1Ω) Max. Vibration 1c/s~5c/s~1c/s (1Min) - 2our seach of paralleled and right angle Δ R±(1%+.5Ω) Max. eat Resistance 26±5 C, 1±1Sec. Δ R±(1%+.5Ω) Max. Dielectric Strength A-5, A-1, A-25 V A-5 15V Δ R±(.5%+.5Ω) Max. A-, A-25 2V Insulation Resistance Under the same test condition of Dielectric Strength, Load DC5V and measure the Insulation R. 1MΩ Min. Terminal Strength (1)Pull Test (3 sec Min) A-51kg, A-1 2.3kg, A-25, A-5 4.5kg (2)Torque Test (5~15sec) A- 27kg-cm, A-25 36kg-cm Δ R±(.2%+.5Ω) Max. Surface Temperature Versus Power Load (on Chassis) Deratning TEMP.( C) % OF RATED POWER A-25 A- A-5 A-25 A-1 A-5 % OF RATED POWER 12 8 A 6 4 C 2 25 ALUMINUM CASSIS AMIENT TEMP( C) 325 Derating is required to reduce chassis outing area and for high ambient temperatures. Curves: A=5 & 1 watt units, unmounted.=25 watt units, unmounted.c=5, & 25 watt units, unmounted. 4 of 6
5 Aluminum oused Power Resistor Materials Encapsulant Silicone End caps Stainless steel Core Ceramic steatite or aluminum ousing Element Aluminum with hard anodic coating Copper-nickel alloy, nickel-chrome alloy or manganese copper Wire (14AWG) A-25L A-5L A-15NL A-15ANL Length=16mm Length=34mm Length=5mm Length=3mm Terminals LVA2-25, Cu (Nickel-plate), W7.5 L1mm Aluminum oused Power Resistor Dimensions - A-25L, A-5L Φ2 P Q G M N E F Dimensions (Unit: mm) E F G M N P Q A-25L A-5L Aluminum oused Power Resistor Dimensions - A-15NL, A-15ANL E Φ5 F P Q G N Dimensions (Unit: mm) E F G N P Q A-15NL A-15ANL of 6
6 Aluminum oused Power Resistor - LVA25 Dimensions dφ DΦ L Suitable for 14~16AWG lmax=15a Unit: mm Tol.: ±.2mm ITEM NEMA-TA Thickness dφ DΦ L LVA ow to Order A 5W L34 14AWG R2 K Product type : A(-25L) ; A(-5L) ; A(-15NL);A(-15ANL) Rated Power : 25W ; 5W ; 15W Wire Length (min.) : L16 ; L34 ; L5 ; L3 Wire : 14AWG Resistance Value (Ω): 12K1 ; R2 ; 1KR Resistance Tolerance (%) : K(±1%) 6 of 6
Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount DESIGN SUPPORT TOOLS Models click logo to get started FEATURES Molded construction for total environmental protection omplete welded
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 Available in non-inductive
More informationMold Military-Qualified Resistive Precision Resistor (RN)
Version: January 13, 2017 Mold Military-Qualified Resistive Precision Resistor (RN) Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing
More informationTYPEA:RH Series TYPEB:NH Series
TYE:RH Series TYE:NH Series ower Rating: 5W-500W Resistance Value: 0.01Ω-100KΩ Resistance Tolerance: ± 0.1%, ± 0.5%, ± 1%, ± 5%, ± 10% RH&NHluminum Resistor isalsocalled metal aluminum resistor,non-induction
More informationCal-Chip Electronics, Incorporated Thick Film Chip Resistors - RM Series
Thick Film Chip Resistors - RM Series Fixed Chip Resistors manufactured for more compact electronic components and automatic mounting system. These Chip Resistors have electrical stability and mechanical
More informationnicrom e l e c t r o n i c
G E N E R A L High Performance Thick Film Resistors C A T A L O G 3 Nicrom Electronic Via Roncaglia CH - 6883 Novazzano SWITZERLAND Phone : ++4 () 9 68 99 86 Fax : ++4 () 9 68 99 86 info@nicrom-electronic.com
More informationIt is composed of description, rated wattage, nominal resistance, tolerance and packaging Explanation of part numbers : E J B P
page 1/7 1. APPLICABLE SCOPE : 1.1 This specification is for use in METAL OXIDE FILM FIXED RESISTORS 1.2 Characteristics and Specifications are according to those of : MIL-STD-105 MIL-STD-202 2. TYPE JIS
More informationMetal Film Leaded Precision Resistor-MFR Series
Metal Film Leaded Precision ResistorMFR Series Construction 5 6 1 2 3 4 7 d D L H 1 Insulation Coating (Expose resin) 5 Resistor Layer (Nickel alloy) 2 Trimming Line 6 Marking (Expose) 3 Ceramic Rod (Alumina
More informationDatasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:
Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power
More information1-8M CMF F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING
CMF Industrial Metal Film Resistors, Industrial FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally
More informationR-Series. Lead Wire Length (H, mm)
Carbon Film Fixed Resistor Specifications Per I E C 6 0 1 1 5-1, I E C 6 0 1 1 5-4 d L H D MIL-R-10509 Features Conformal multi-layer coating (flame proof coating available) Color code per MIL & EIA standards
More information(RE) Ultra Precision Resistors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (RE) Ultra Precision Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
More informationMQEC. Metal Alloy Low Resistance Resistor Specifications. 1. Scope: 2. Product Features: 3. Product Applications: a. LR1206 series. b. LR2010 series.
1. Scope: 1.1 This specification is covered following products: a. LR1206 series. b. LR2010 series. c. LR2512 series. d. LR2725 series. e. LR2728 series. 2. Product Features: 2.1 Ideal for all types of
More informationMQEC Metal Alloy Low Resistance Resistor Specifications LR4527/5W
1. Scope: 1.1 This specification is for LR4527 (5.0W) product only. 2. Product Features: 2.1 Proprietary processing technique produces extremely low Resistance values. 2.2 Ultra Low and stable T.C.R. (
More information2W, 2512, 4-Terminal, Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2512, 4-Terminal, Low Resistance Chip Resistor (Lead / Halogen Free) 1. Scope This specification applies to 3.2mm x 6.4mm size 2W, fixed metal foil with ceramic carrier current sensing resistors used
More informationM16 M20 M25 M207 M51 M100 M200
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
More informationCarbon film resistors
Carbon film resistors (6.3 φ 2.4 size: 1 / 3W) ROHM resistors are produced using an integrated production system for parts and materials, and state of the art technology to ensure high precision productivity,
More information(EE) Low TCR Metal Film Resistors
Version: March 1, 2017 Electronics Tech. (EE) Low TCR Metal Film Resistors Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld.,
More informationHIGH VOLTAGE RESISTOR HVR
HIGH VOLTAGE RESISTOR FEATURES Metal film technology High pulse loading capability Small size Meeting safety requirements of: UL1676 (37 and 68, range 510 KΩ ~ 11 MΩ) - pending IEC 60065 EN 60065 VDE 0860
More informationPower Resistor, for Mounting onto a Heatsink Thick Film Technology
Power Resistor, for Mounting onto a Heatsink Thick Film Technology FEATURES 100 W at 25 C case temperature High power rating High overload capabilities up to 2500 V RMS Wide resistance range from 0.0 to
More informationData Sheet for Precision Resistors
Epoxy Coating Inorganic Coating Nickel Plating Resistive Element Terminal, Tin Plated Ultra Precision Thin Film NiCr Chip Resistor Advanced Thin Film Technology Best Long Term Stability for NiCr Low Noise
More informationMetal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
More informationMFM Metal Film MELF Resistor
MFM Metal Film MELF Resistor MFM (0102, 0204, 0207, 0309) Metal Film MELF Resistor Standard Type MFM (1/8W, 1/4W. 1/2W) Application - Automotive - Industrial Control System - Telecommunication Equipment
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 62-7265 n/a 1R 2W 1% METAL FILM RESISTOR RC 62-7266 n/a 2R2 2W 1% METAL FILM RESISTOR RC 62-7267 n/a 3R3 2W 1% METAL FILM RESISTOR RC 62-7268 n/a 4R7
More informationsolutions HIGH DENSITY CONNECTORS Custom designed Contact arrangements
Custom designed HIGH DENSITY CONNECTORS NANO-D PITCH As the need for increased miniaturisation is becoming ever greater, AXON has developed an ultra-high density solution within the existing micro connector
More informationChip resistor networks
Chip resistor networks (8 4 size)!features ) Convex electrodes Easy to check the fillet after soldering is finished. 2) Small, light, rectangular 4-chip network Area ratio is % smaller than that of MNR34,
More informationHS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
More informationCHIP TECHNOLOGIES INC. Chip Resistor Specification
CHIP TECHNOLOGIES INC. Chip Resistor Specification Utech Electronics 1-5250 Finch Ave. East Scarborough, Ontario Canada, M1S 5A4 1-800-268-8832 www.utech.ca 1 1.0 SCOPE... 3 2.0 Part Number Designation.
More informationOPERATING TEMP RANGE: -40 TO 80 C -40 TO 105 C with optional UL2722 lead wires
PRODUCT DATA SPECIFICATIONS NTC THERMISTORS SERIES 10J / 11J OPERATING TEMP RANGE: -40 TO 80 C -40 TO 105 C with optional UL2722 lead wires CONSTRUCTION: 10J: Fully molded polypropylene or PBT plastic
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationZ Series (Z-Foil) Vishay Foil Resistors.
Z Series (Z-Foil) Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/ C, Tolerance of ± 0.005 % (50 ppm), Load Life Stability of ± 0.005 %, ESD Immunity up to 25 kv and Thermal EMF of 0.05 µv/
More information1/2W, 0612 Low Resistance Chip Resistor (Lead / Halogen Free)
1/2W, 0612 (Lead / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1/2W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL1632W
More information15 15A 20 20A 30 30A 40 40A 60 60A VAC VAC VDC 24VAC VAC. 1 Single-phase. SRH VAC Zero cross turn-on
Features DIN rail mount or panel mount installation Dielectric strength: 4000 VAC High heat dissipation efficiency with ceramic PCB and integrated heatsink, random turn-on models available Input Indicator
More informationPLS NOTE THE VERSION STATED
LR Series Metall Alloy Low-Resistanc ce Docu ument No. Released Date Page No. IE-SP-022 2018/04/27 1 1 Scope: 1.1 This specification is applicable to lead free, halogen free f of RoHS directive for metal
More informationElectrical Specifications. Dielectric. Ohmic Range (Ω) and Tolerance Power Rating (Watts) 5%, 25ºC VAC
Features: High current capability RoHS compliant / lead-free Non-inductive style only available with silicone coating (NSWT) Suitable for soldering or thru bolt connections Wirewound ribbon on ceramic
More informationThick film rectangular
Thick film rectangular (3225 size: 1 / 4W)!Features 1) Made of same material as the general purpose chip resistors (MCR1 / 18). 2) Highly reliable chip resistor Ruthenium oxide resistive material offers
More information20 W Power Resistor, Thick Film Technology, TO-220
20 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS Models Available click logo to get started The well known TO-220 package is compact and easy to mount. DIMENSIONS in millimeters
More informationDITF ToolKit 1. Standard Substrate Sizes (selected at the factory for optimum process)
DITF ToolKit 1 DITF Toolkit Substrates Common Substrate Materials Alumina (99.5% min) єr = 9.9 Tan d = 1.5 x10-4 Aluminum Nitride (K170) єr = 8.9 Tan d = 2.0 x10-3 Beryllia (99.5%) єr = 6.7 Tan d = 3.0
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating Low thermal radiation of the case Wide ohmic value range Easy
More informationThermocouple Heads. MOST POPULAR MODELS HIGHLIGHTED! To Order (Specify Model No.) B-9 76 (3) Model Price Material Type Number Each 48 (1 7 8)
Thermocouple Heads Dimensions: mm (in) MOST POPULAR MODELS HIGHLIGHTED! Model Price Material Type Number Each 48 ( 7 8) (3 3 8) 54 (2 8) NB-0 $23 Cast Iron NB NB-2 26 NB-4 28 92 (3 5 8) NB Cast Iron NB4
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM RLC10, 16, 20, 32, 35, 50, 63. AEC-Q200 qualified
No.: RLC-K-HTS-0001 /17 Date: 2017. 4. 21 Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM Style: RLC10, 16, 20, 32, 35, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and
More informationDATA SHEET Metal Element Current Sensing Chip Resistor CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor 0.5% TO 5%, TCR ±25 TO ±450 SIZE: 1206/2010/2512/2725/2728/4527/4527S RoHs Compliant 14 October, 2016 V.4 DS-ENG-007 23 Page: 2 of 1. SCOPE 1.1 This
More informationCover. Wiper. Base. Shaft
TURNS INTERNAL STRUCTURE!! FEATURES Lead-free soldering, Cadmium-free Fine adjustment is possible Automatic mounting is possible (Taping) Flow/reflow soldering is possible Sealed construction (Washable)
More informationFrelTec GmbH. Cement Fixed Resistors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 9/21/2014 1/17 Freltec GmbH www.freltec.com SPECIFICATION Part Number 060 WC 05 * W * J * 0 P05 * Type Version / Type Wattage production type Value Tolerance
More informationUltra High Precision Bulk Metal Foil Technology 4 Resistor Surface Mount Hermetic Network with 0.5 ppm/ C TCR Tracking and % Tolerance Match
Ultra High Precision Bulk Metal Foil Technology 4 Resistor Surface Mount Hermetic Network with 0.5 ppm/ C TCR Tracking and 0.005 % Tolerance Match INTRODUCTION Vishay model SMNH networks incorporate all
More informationMechanical Ratings. Description Plastic (800EP/ES) Metal (800EM/EB) 1/2 cycle sine wave for 11 ms and no damage at 100 G
Specifications ➊ Front of Panel (Operators) Mechanical Ratings Description Plastic (8EP/ES) Metal (8EM/EB) Vibration (assembled to panel) 1 2 Hz, 1.52 mm max./1 G max. Shock and no damage at 1 G Degree
More information(1) For internal configuration and circuit schematic, please contact. (2) For power rating per each package, please refer to page 5
Custom Hermetically Sealed Precision Resistor Network Devices (PRND) With Screen/Test Flow in Compliance with EEE-INST-002 (Tables 2A and 3A, Film/Foil, evel ) and MI-PRF-340 INTRODUCTION PRND (Precision
More informationSp e c i f i c a t i o n
K M Y Last update: 2015.4.4 No.RLC-K-HTS-0001-15 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND LOW OHM Style: RLC10, 16, 20, 32, 35, 50,
More informationHigh Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology
High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 8
Amphenol Amphenol Taiwan Corporation Sheet 1 of 8 Title: Part Number: Description: Micro Power Plus Product Specification G88MP Series 3.0 mm Pitch, PCB Mount / Cable Crimping Type Revisions Control Rev.
More informationHigh Temperature (245 C) Thick Film Chip Resistor
High Temperature (245 C) Thick Film Chip Resistor DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES High temperature (245 C) Large ohmic value range 0.1 to 100 M Available Operating
More informationROHS Compliant. Description. General Specifications. Resistive Element Substrate Terminal Finish Operating Temperature. Electrical Specifications
ROHS Compliant Model B100NA20X4 Chip Attenuator 100 Watts, 20 db Description The B100NA20X4 is high performance Aluminum Nitride (AlN) chip attenuator intended as a cost competitive alternative to Beryllium
More informationElectrical Specifications WW, WWS, 70ºC 0.1% 0.5% 1% 5% WW W 0.5 W 5-2K 3-2K 2-3K WW1A RW-70 1 W 1.3 W 1-5K WW2 RW W 2.
Features: WWS offers miniature size at higher power rating High performance for low cost High power to size ratio MWW/NMWW completely molded construction with welded terminations Complete welded terminations
More informationAutomotive air or oil temperature Appliances cooking temperature. MOUNTING DIMENSIONS (for reference only)
TD Series FEATURES Interchangeable without sensor-tosensor recalibration Very small thermal mass for fast response Air or liquid temperature sensing Linear temperature sensitivity Proven thin film processing
More informationCX Thin Fil s. Resistors Attenuators Thin-Film Products Thin-Film Services. ISO 9001:2008 RoHS/REACH Compliant ITAR Compliant
CX Thin Fil s Resistors Attenuators Thin-Film Products Thin-Film Services www.cxthinfilms.com ISO 9001:2008 RoHS/REACH Compliant ITAR Compliant www.cxthinfilms.com sales@cxthinfilms.com +1 (401) 461-5500
More informationElectrical Specifications
Features: Higher power ratings than standard thick film chips Absolute TCRs to ±100ppm/ C Impervious to Sulfur contamination, no silver present in terminations Absolute Tolerances to 1% Completely lead
More informationRequest for Proposal of GEO-KOMPSAT-2 EEE Part Procurement HEATER (FLEXIBLE)
Korea Aerospace Research Institute GEO-KOMPSAT Program Office 45 Eoeun-dong Yuseong-gu Daejeon 305-333 Republic of Korea Request for Proposal of GEO-KOMPSAT-2 EEE Part Procurement HEATER (FLEXIBLE) Date:
More informationElectrical Specifications. Maximum Overload Current (A) Maximum Rating Current (A)
Features: High power metal alloy current sense resistor High temperature performance up to 225 C; for operation up to 275ºC, contact factory Low thermal EMF (
More informationThick film rectangular
Thick film rectangular (212 size : 1 / 8W)!Features 1) Power rating of 1 / 8W 2) Highly reliable chip resistor Ruthenium oxide dielectric offers superior resistance to the elements. 3) Electrodes not corroded
More informationIndustrial Thermocouples
Industrial Thermocouples Industrial thermocouples are used in high temperature applications, such as those listed below. Several calibrations are available as well as various mechanical configurations.
More informationContacts for Full Duplex Ethernet Link
8D Series Twinax & Quadrax Contacts Contacts for Full Duplex Ethernet Link Twinax and Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments.
More informationElectrical Specifications. Maximum Overload Current (A) Maximum Rating Current (A)
Features: High power metal alloy current sense resistor High temperature performance up to 225 C; for operation up to 275ºC, contact factory Excellent frequency response Low thermal EMF (
More informationSeries KN Low Ohmic Power Resistors, low inductance, ceramic case
Low Ohmic Power esistors, low inductance, ceramic case Specifications Type KN350-8 KN351-8 KN352-8 KN353-8 KN354-8 Styles 7718 7725 7738 9925 9938 Power rating P 70 W 4 5 7 7 9 esistance range Ω 0003...
More informationYSI Precision Thermistors & Probes
YSI Precision Thermistors & Probes Introduction Thermistor Components Special Test Services Configure to Order Probes YSI 400 and 700 Series Reusable Probes YSI 4600 Precision Thermometers Technical Information
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More informationENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with DIN B Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with DIN B Head With stainless steel plug (no thread) Pt100 probe with DIN B terminal head Class B, 4 wire connection Various
More informationENGLISH. 1metre 7/.02mm Teflon insulated twin twisted lead
Datasheet Platinum Resistance Pt100 Sheathed Thin Film Strip Sensor 2 wire sensor sheathed in a thin stainless steel shim body ideal for surface measurement ENGLISH Sheathed Pt100 element in a thin, flat
More informationMATERIAL SPECIFICATION FOR HIGH PRESSURE SODIUM LUMINAIRES FOR UNDERPASS LIGHTING
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 2434 November 2016 MATERIAL SPECIFICATION FOR HIGH PRESSURE SODIUM LUMINAIRES FOR UNDERPASS LIGHTING TABLE OF CONTENTS 2434.01 SCOPE 2434.02 REFERENCES
More information24 2 Amp Amp Amp Amp. Packaging Specifications. O P T R D t S Units. Electrical Specifications
JW Series Jumper Wire Ideal for crossovers or jumpers on circuit boards High current rating Part Number Electrical & Diameter Gauge Reference Current JW 50 R JW 55 R JW 60 R JW 80 R 0.020 ± 0.001 0.50
More informationHOS LOW OHM POWER RESISTORS. SERIES Size As per AEC-Q Open frame strip type. 2W to 5W. R001 to R05.
SERIES Open frame strip type. 2W to 5W. R1 to R5. As per AEC-Q2 PHYSICAL CONFIGURATION L W H T D Recommended PCB layout for high precision applications : Kelvin (4 terminal pad design) is suggested as
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating: 500 W High overload capability up to 2 times rated power (see
More informationInnovative, decorative grills & Screens
Innovative, decorative grills & Screens Sales@niduae.com Aluminum Stainless Steel Copper Brass MR Composite panels PVC FOrex Gypsum CNC Cut Laser Cut Waterjet Cut Najib Build Maint T +971-6-7430267 M +971-55-9446222
More informationHigh Power Resistive Products
AVX introduces its line of High Power Resistive Products. All products are designed and manufactured at our ISO 91 Facilities. All products are designed to meet MIL-PRF-55342. (1 Ω - 2 Ω available) Resistance
More information10 Manor Parkway, Suite C Salem, New Hampshire
Micro-Precision Technologies (MPT) is an independent manufacturer of hybrid integrated circuits, multichip modules, and high-precision thick film substrates for the military, medical, avionics, optoelectronics,
More informationElectrical Specifications
Features: High voltage capability from 1600 to 7000 volts Inexpensive high voltage leaded resistor solution High resistance values up to 1G Tolerances as low as 1%; TCRs as low as 50PPM/ºC Flameproof coating
More informationISA-WELD // Precision resistors. BRS // Size Features
Features 2 W power rating at 2 C Constant current up to 32 A (2 mohm) copper connectors Solid metal precision resistance materials Excellent long-term stability Ideal suited for mounting on DBC / IMS substrate
More informationHigh Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor
High Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor FEATURES Designed to meet UL1412 safety requirements Defined fusing characteristics Inherent non-inductive design Superior surge handling
More informationThermal Cutouts. Current sensitive thermal protection for coils/windings
Thermal Cutouts Current sensitive thermal protection for coils/windings FEATURES broad product range for numerous applications rhomboid shape small size good pressure resistance high switching capacity
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Low-Inductance X5R / X7R
Product Specification November 21, 2016 V.1 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS - X5R / X7R 6.3 V TO 50 V 10 nf to 1 uf RoHS compliant & Halogen Free 2 SCOPE This specification describes
More informationGeneral Purpose Chip Resistors MCMR Series
Description The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
More informationIMPROVED PRODUCT. S Series. High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Tolerance of ± 0.005% and Load Life Stability of ± 0.
THROUGH HOLE S Series High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Any value at any tolerance available within resistance range INTRODUCTION Bulk Metal Foil (BMF) Technology outperforms all other
More informationPlatinum Resistance Thermometer Pt100 Precision Probe - High accuracy platinum resistance thermometer probe, 6mm diameter x 250mm
Datasheet ENGLISH Platinum Resistance Thermometer Pt100 Precision Probe - High accuracy platinum resistance thermometer probe, 6mm diameter x 250mm Precision Pt100 sensor offering high accuracy over the
More informationProduct Specification JUL 14 Rev. A1
Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents
More informationNickel Temperature Sensors 1/15
Nickel Temperature Sensors 1/15 General Information In many industrial sectors and fields of research, temperature measurement is one of the most important parameters to determine product quality, security,
More informationPrecision SMA. Key Features. Military grade. Rugged stainless steel design. Intermateable with all SMAs to Mil-C Frequency range DC to 18 GHz
Key Features Military grade Rugged stainless steel design ntermateable with all SMAs to Mil-C-39012 Frequency range DC to 18 GHz Cannon s precision SMA connectors feature the ML-C-39012 Series SMA interface
More informationPt100 (100 0 C) to IEC 751, Class B, 4 wire 3.0, 4.0, 4.5 or 6.0mm diameter 316 stainless steel sheath.
Datasheet Platinum Resistance Thermometer Pt100 Industrial Sensor Probe, Class B Available in 3.0, 4.0, 4.5 or 6.0mm diameter x Various probe lengths ENGLISH Multipurpose Pt100 Probe to IEC751 Class B,
More informationAmphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
More informationMAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
More informationTHICK.
Fullchance www.fullchance.com THICK FILM Ceramic and Metal Core Heating Elements www.fullchance.com More Heat. More Coverage. Small Spaces. Compact, high performance and superior insulation properties,
More informationChip resistor networks
Chip resistor networks (63 4 size) Features 1) Convex electrodes Easy to check the fillet after soldering is finished. 2) Small, light, rectangular 4-chip network Area ratio is 65% smaller than that of
More informationMineral Insulated Platinum Resistance Thermometer PT100 Sensor - Available in 3mm or 6mm diameter x 150mm or 250mm probe lengths
Datasheet ENGLISH Mineral Insulated Platinum Resistance Thermometer PT100 Sensor - Available in 3mm or 6mm diameter x 150mm or 250mm probe lengths High temperature, rugged, flexible Pt100 probe Suitable
More informationVandal Resistant Switch
Table I Table II IP x x IP Ratings Guide The IP classification system designates the degree of protection provided by an enclosure against solid objects or water ingress. Table I shows degrees of protection
More informationData Bus Connector and Terminator Requirements Document DB-1001-A. Revision C
Data Bus Connector and Terminator Requirements Document DB-1001-A Revision C 2507 W. Geneva Dr. Tempe, Arizona 85282 Phone [602] 231-8616 FAX [602] 273-9135 www.phxlogistics.com TABLE OF CONTENTS 1. Introduction
More informationNickel Temperature Sensors 1/12
Nickel Temperature Sensors 1/12 General Information In many industrial sectors and fields of research, temperature measurement is one of the most important parameters which determines product quality,
More informationEconomical aluminum substrates make light work of visible LED circuits
Economical aluminum substrates make light work of visible LED circuits Advances in solid state light emitting diodes (LEDs) over the last several years have opened new applications for these devices. Traditionally
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 1.0 SCOPE This Product Specification covers the 3.96 mm (.156 inch) centerline
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): @ V C or @ 0V C Logic Level (gold): 0.4V maximum @ 8V C/DC maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Logic/Power Level:
More informationBulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators
Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...
More informationGuide for Tantalum Solid Electrolytic Chip Capacitors with Polymer Cathode
Guide for Tantalum Solid Electrolytic Chip Capacitors with Polymer Cathode INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES High power rating: 500 W High overload capability up to 2 times rated Power (see energy curve Heatsink mounting Low thermal radiation
More information