SAIL Reaching out to Global Markets

Transcription

1 SAIL Reaching out to Global Markets

2 SAIL Reaching out to Global Markets Authority of India Limited (SAIL) is India s largest steelmaker and one of the world s leading steel producer with an annual turnover of over US$ 4 billion in Annually it produces over 10 million tonnes of various steel products, to meet the exacting requirements of both domestic as well as overseas customers. Its vision for the future, encompasses a presence in major markets of the world. Being a manufacturer of world-class steel products, SAIL offers to its customers a wide product profile matched with excellent service, and a choice ranging from widely traded items like Hot Rolled Coils to specialty products like CRNO steels. SAIL s products have found ready acceptance in about 75 countries the world over. Products exported to various countries include Mild Billets, Slabs, Wire rods, Structurals, Hot-rolled Plates/ Coils/Sheets, Cold-rolled Coils/Sheets, Rails, CRNO s and Pig Iron. SAIL s Mild and Pig Iron exports are undertaken by its International Trade Division (ITD) based in New Delhi.

3 Bhilai A major exporter of steel products, Bhilai produces 3.6 million tonnes of saleable steel annually. The plant has the distinction of supplying the widest and heaviest plates in India, besides being the only established supplier of rails to the Indian Railways. The plant has been regularly supplying quality products to the foreign markets for over two decades now and has earned the goodwill of innumerable customers worldwide. Products Rails, Structurals, Merchant products, Wire rods, Re-bars, Plates, Billets, Slabs and Pig iron.

4 Bhilai Plates Producing : Bhilai Mild Plate Mill Plates Specification : Mild Thickness Range in mm. ASTM A 36/ASME SA 36M 8 to 56 (*) BS-4360 Grade 43A/B 8 to 56 JIS-G-3101-SS400 } DIN RST 37.20/ST 44.2 BSEN S 275 JR/S235 JR/235 JR G2 ASTMA 283 M/ASME SA 283 M Grade A/B/C/D 8 to 40 JIS-G-3101-SS490 AS3678 Grade 250 Ship Building Quality ABS Grade A with ABS Certification 8 to 50.8 LRS Grade A with Lloyds Certification 8 to 40 LRS Grade B with Lloyds Certification 8 to 40 High Tensile ASTM A 572 M Grade 42/50 Type 2 } JIS-G 3106 SM 490 A BSEN S 355 JR 8 to 32 CAN/CSA-G40.21-M W/44w Other Parameters Thickness 8 to 12 mm. : Maximum 15% Above 40 mm. : Maximum 8% Thickness Width Range For 8 mm mm. Above 9 mm. upto 15 mm to 2750 mm. Above 15 mm. upto 20 mm to 2750 mm. Above 20 mm to 2750 mm. Above 2750 upto 3200 mm. available in thickness range of mm. Length Range 5000 to mm. (*) Small quantities in thickness above 56 mm. and upto 76 mm. (3 ) can be considered on trial basis. Packing : In bundles of metric tonnes for plates upto 12 mm. thickness. In loose condition for plates above 12 mm. Technical Delivery Conditions : n All plates shall be supplied in Killed quality (Si-Al Killed) n All plates are supplied in unnormalised, as rolled condition n Smaller sizes such as 4 x8, 5 x10, etc. can be supplied through flamecutting n Thickness above 40 mm. shall be supplied with gas cut edges on all sides and with relaxed tolerance on flatness and waviness n Plates of 8 to 50 mm. thickness and upto 2500 mm. width in following grades can be supplied with n U marking and TUV certification; EN JR G2, S275 JR and S355 JR High tensile grades can be supplied upto 10% of the total order. Exclusive orders in these grades are not possible n Total no. of sizes : for an order size of metric tonnes n Invoicing : Theoretical weight basis n Inspection : inspection n Port of Loading : Visakhapatnam, India n n n The above range is only indicative and certain thickness x width x length even within standard range may not be possible for the mill The above particulars are by way of general information only Offers are subject to availability and confirmation of terms and conditions on case to case basis

5 Bhilai Mild Wire Rods in Coils Producing : Bhilai Size Range (Diameter) : 5.5, 6.0, 7.0, 8.0, 10.0 mm. Specification : a) JIS-G-3505 b) IS Grade 3,4 c) JIS-G SR-235 Rolling Tolerance : As per IS:1852 (85) d) ASTM A 510 M-93 SAE-1010, SAE-1008, SAE-1010/SWR-14, SAE Diameter +/-0.5mm. - Ovality 0.65 mm. Dimensions : a) Coil outer diameter : 1250 mm. Coil Weight : 930 Kg approx. b) Coil inner diameter : 950 mm. c) Coil width : 500 mm. Packing : Quadruple binding with signode strap on each Coil with identification tag Invoicing : On actual weight basis Minimum Order Quantity : 300 metric tonnes per size Port of Loading : Visakhapatnam, India Wire Rods

6 Bhilai Producing : Bhilai Mild Billets Production Process : Twin Hearth, Ingot Casting Size Range : 100 x 100 x 6000 mm., 105 x 105 x 6000 mm. Specification : With the following Chemical composition as per ladle sample analysis (*) C : % Mn : % S&P : 0.05% - max each Si : 0.10% max (Semi Killed) (*) Restrictions within the specified ladle sample analysis can be agreed depending on the availability Note : Chemistry different from above may also be supplied after confirmation by us Supply Condition : All billets shall be supplied in As Rolled condition only Rolling Tolerance : As per IS:2830/1992 with the following : A) Tolerance on Dimension : +/- 2 mm. B) Diagonal Difference : +5 mm. (max) C) Tolerance on Length : +100/-400 mm. Packing : Bare, strapped in bundles of 5 metric tonnes max. Invoicing : On actual weight basis Minimum Order Quantity : 1000 metric tonnes Port of Loading : Visakhapatnam, India Billets

7 Bokaro India s premier flat products plant produces 3.4 million tonnes of saleable steel annually. Bokaro s Hot and Cold-rolled steels as well as its Galvanized products have been acclaimed for their quality. Products Hot-rolled Coils/Plates/Sheets, Cold-rolled Sheets/Coils, Galvanised Sheets/Coils, CC Slabs and Pig Iron.

8 Bokaro Hot Dip Galvanised Plain Coils Producing : Bokaro Specification : ASTM A653M; JISG 3302 (1987) SGCC, SGCD-1; DIN ST 02 A) Coating : 120/180/200/220/275 gm/sq. mtr. Nominal on both sides B) Quality : Chromated Regular Spangle, Continuously Hot Dipped, Lock Forming, Unoiled with Strip Edges cut at Pickling stage C) Technical : Coil ID : 600 mm. Delivery Coil Weight : 10 metric tonnes Max, Conditions without welding joint Y.S. : 250 MPa Max. UTS : MPa Hardness : 65 HRB max. Tolerance : As per applicable ASTM specification Works test certificate shall contain actual chemistry and LFQ conformity only Staggered winding will be provided While flatness is not measured, coils are stretch levelled with 1.5-2% elongation to improve flatness Packing Condition : Coils are first wrapped with VCI paper followed by Polythene sheet. It is then covered with HDPE and securely packed in metallic covering with eye rings Edge protectors are fitted on the sides of the coils Only Non-Wood Packing will be used Basis of Invoicing : Nett weight Sizes/Qty. : 0.50 mm. x 900 /1000 mm mm. x 900 / 1000 / 1100 / 1225 mm. Stamping on Material : Markings on Coil Tag : On line, in ink, and comprising of SAIL JYOTI brand, coating, weight and date of production etc. Size, Grade, Contract No., Coil No., & Gross Weight (incl. weight of packing) Inspection : By Bokaro. Final inspection would be required by buyer at plant before despatch of materials Port of Loading : Haldia Port, India GP Coils

9 Bokaro Mild Hot Rolled Sheets/Plates Producing : Bokaro Specification : JIS G 3101 SS 400; JIS G 3132 SPHT 1/2; JIS G 3131 SPHC; EN S235 JR; S275 JR; DIN ST 37.2/ST 44.2; BS 4360 GR. 40/43A; ASTM A 36 / A569 /A 570 GR 33/40; SAE SAE 1018 Supply Condition : a) As rolled (through concast route), fully Aluminium Killed with Silicon content of 0.04% Max. (optional), not further worked than Hot Rolled, Non-Clad, Non-Plated, Non-Coated, Unoiled, Unpickled, Unskinpassed, Mill Edge Condition, and on the basis of metric system b) No Temper pass facility is available Rolling tolerance : As per specific ordered and mutual agreement. For example typical (for width and tolerance on thickness is 2/3 value of JISG 3193 thickness only) Packing : Bare Packing in bundles of 7.5 metric tonnes max. Invoicing : Based on actual net weight mentioned on the test certificate Size Range : Thickness Min. Width Max. Width Min. Length Max. Length (mm.) (mm.) (mm.) (mm.) (mm.) ,300 2,500 2, ,350 2,500 3, ,400 2,500 3, ,500 2,500 3, ,600 4,000 5, ,830 4,000 8,000 Minimum Order Quantity : Per Single Size : 100 metric tonnes Port of Loading : Haldia Port, India HR Sheets/Plates

10 Bokaro Producing : Bokaro Mild Hot Rolled Coils Specification : JISG 3101 SS 400; JISG 3132 SPHT 1/2; JISG 3131 SPHC; EN S235 JR; S275 JR; DIN ST 37.2/ST 44.2; BS 4360 GR. 40/43A; ASTM A 36 / A 569/A 570 GR 33/40; SAE SAE 1018 or equivalent. Supply Condition : a) As rolled (through concast route), fully Aluminium Killed with Silicon content of 0.04% max. (optional), not further worked than Hot Rolled, Non-Clad, Non-Plated, Non-Coated, Unoiled, Unpickled, Unskinpassed, Mill Edge Condition, and on the basis of metric system. b) Guarantee of No Coil Break is not available since the same depends on decoiling practice at end user s end as well. c) No Temper Pass facility is available d) Coils are handled in Eye to the Sky position at the mill and made Eye Horizontal after receipt at Haldia. e) Coil I.D mm. (33½ ) (approx.) f) Coil O.D mm. (90½ ) max. g) Width / Coil Weight : Width Range in mm.(inch) Coil Weight in metric tonnes (37-41 ) Above (41-49 ) Above (48-60 ) Above (60-63 ) Above (63-72 ) Rolling Tolerance : As per specific ordered and mutual agreement. For example typical (for width and tolerance on thickness is 2/3 value of JISG 3193 thickness only) Packing : Bare strapped with high tensile straps of minimum 3 numbers through the eye and minimum 3 numbers across the circumference. Invoicing : Based on actual net weight mentioned on the outer layer of the coil. Sizes : Thickness in mm. (inch) Width in mm. (Inch) 1.6 (0.063 ) (37-41 ) 1.8 (0.071 ) (37-49 ) 2.0 (0.079 ) (37-52 ) > ( ) (37-56 ) > ( ) (37-63 ) > ( ) (37-72 ) Markings : Size/Grade/Coil No./Heat No./Net Wt./Contract No./Made in India Minimum Order : A) Per single width and per grade : 1000 metric tonnes Quantity B) Per single Thickness per width : 250 metric tonnes HR Coils Port of Loading : Haldia Port, India

11 Bokaro Mild Cold-Rolled Sheets Producing : Bokaro Specification : DIN 1623 St 12.03; ASTM A 366; JISG 3141 (1990) SPCC-SD Supply Condition : Annealed, Skin Passed, Dull Finish & Oiled, Aluminium Killed with Silicon as 0.04 % max. Packet Weight : 10 metric tonnes max. Tolerance : As per specification ordered Packing Condition : Sheets will be covered with HDPE, second layer with metal envelope and edge protectors Basis of Invoicing : Actual nett weight on the packets Sizes : mm. x 1000 mm. x 2000 mm. / 2500 mm mm. x 1000 mm. / 1250 mm. x 2000 mm. / 2500 mm. Markings : Size, Grade, Contract No., Packet Number, Gross and Nett weight on each packet Inspection : By Bokaro. Final inspection may be done by buyer at the plant before the despatch of materials to port if desired Port of Loading : Haldia Port, India CR Sheets

12 Bokaro Mild Cold-Rolled Coils Producing : Bokaro Specification : DIN 1623 ST 12.03; ASTM A568/366; JIS G3141 SPCC CD; BS 1449 Pt. 1; IS 513 GR O or equivalent with Silicon content of 0.04% maximum Supply Condition : Annealed, Skin Passed, Matt Finish, Oiled, Mill Edges (Serration 2 mm. maximum). Sizes : Thickness Width Coil ID Maximum Coil (in mm.) (in mm.) (in mm.) Weight. (in mt.) 0.5 to / >0.63 to 0.8 Upto >0.8 to 2 Upto Coil OD : 2200 mm. maximum Tolerance : Normal as per specification Oil Coating : Uniform oiling throughout the strip (coating thickness not measured) Surface Roughness : Normally strips have roughness value below 1.5 micron Packing Condition : Coils are wrapped in polythene sheet/hdpe, VCI paper and metal packed with edge protector and without inner sleeve Basis of Invoicing : Actual net weight mentioned on the coils Minimum Order Size : 250 metric tonnes per size in each size/grade combination Quantity Tolerance : + 5% at seller s option Marking : Size; Grade; Contract No.; Coil No.; Gross weight; and Net weight Inspection : By Bokaro. Buyer can also inspect the materials at the before its despatch Port of Loading : Haldia Port, India CR Coils

13 Durgapur With an annual production of 1.6 million tonnes of saleable steel, the plant is a major producer of Railway track materials, Billets, Structurals and Merchant products. Products Billets, Medium Structurals, Merchant Rounds, Re-bars, Skelp, Wheels and Axles.

14 Durgapur Producing : Durgapur Mild Billets Production Process : BOF, Continuous Casting Sizes : 100x100x9000/12000mm. 125x125x9000/12000mm. Specification : With the following chemical composition as per ladle sample analysis(*) C : % Mn : % S&P : 0.05% Max each Si : 0.10% % (Silicon killed) (*) Restrictions within the specified ladle sample analysis can be agreed depending on the availability Note :Chemistry different from above may also be supplied after confirmation by us Supply Condition : All billets shall be supplied in As Cast condition only Rolling Tolerance : As per is : 2830/1992 with the following 100x100mm. 125x125mm. Packing : Loose Invoicing : On actual weight basis Minimum Order Quantity : 1000 metric tonnes Port of Loading : Haldia Port, India Tolerance on Dimension +/-3mm. +/-5mm. Diagonal Difference +8 (Max) +10mm. (Max) Tolerance on Length +100/-200mm. +100/-200mm. Billets

15 Rourkela A major producer of flat, tubular and coated steel products, this plant produces annually 1.6 million tonnes of diversified steel items. Products Wide and Heavy Plates, Hot-rolled Sheets/Coils, Chequered Plates/Coils, Cold-rolled Sheets/ Coils, Galvanised Plain/Corrugated Coils/Sheets, Electrolytic Tin Plates, Electrical Sheets in Coils, ERW Pipes, Spirally Welded Pipes.

16 Rourkela Mild Plate Mill Plates Producing : Rourkela Specification : Mild Thickness Range ASTM A 36 BS-4360/ EE/43/EE JIS-G-3101-SS400 DIN RST 37.20/ST mm. BSEN 10025/1993 S-235 JR G2 IS-2062 Grade B/Grade C JIS-G-3106-SM400 A/B Ship Building Quality LRS Grade A with Lloyds Certification 8-20 mm. Other Parameters: Thickness 8 to 10 mm. : maximum 10% * above 20 mm. upto 36 mm.: Very limited quantity as per mutual agreement Thickness For 8 mm. upto 10 mm. Above 10 mm. upto 20 mm. Above 20 mm. upto 36 mm. Length Range Width Range mm mm mm to mm. * Plates above 20mm. and upto 36mm. will be flame cut with gas. Packing : In bundles of metric tonnes for Plates upto 12 mm. thickness. Loose for plates above 12 mm. General Information : 1. The size ranges are indicative only and certain thickness x width x length may not be possible. 2. The size are to be dealt in metric system only. 3. All plates are supplied in unnormalised, as rolled condition. 4. Offers are subject to availability and confirmation of terms and conditions on case to case basis. Port of Loading : Visakhapatnam, India MS Plates

17 Rourkela Producing : Rourkela Mild Hot Rolled Coils Specification : JISG 3101 SS 400, JISG 3132 SPHT 1/2, JISG 3131 SPHC, EN S235 JR, S275 JR, DIN ST 37.2/ST 44.2, BS 4360 GR. 40/43A, ASTM A36 / A 569/ A 570 GR 33/40, SAE 1008-SAE 1018 or equivalent Supply Condition : a) As Rolled (through Concast Route), fully Aluminium Killed with Silicon content of 0.04% Max. (Optional), not further worked than Hot Rolled, Non-Clad, Non-Plated, Non-Coated, Unoiled, Unpickled, Unskinpassed, Mill Edge Condition, and on the basis of metric system b) Guarantee of no Coil Break is not available since the same depends on decoiling practice at end user s end as well c) No Temper pass facility is available d) Coils are handled in Eye to the Sky position at the mill and made Eye Horizontal after receipt at Visakhapatnam e) Coil I.D mm. (approx.) f) Coil O.D mm. max. g) Coil Weight metric tonnes Rolling Tolerance : As per specifications ordered and mutual agreement. For example typical (For width and tolerance on thickness is 2/3 value of JISG 3193 Thickness only) Packing : Bare strapped with high tensile straps of min 3 nos. through the eye and min. 3 nos. across the circumference or as mutually agreed Invoicing : Based on actual net weight mentioned on the outer layer of the Coil Sizes : Thickness (mm.) Width (mm.) / Markings : Size, Grade, Coil no., Heat no., Contract no., Net weight Minimum Order Quantity : Per single width and per Grade : 250 metric tonnes Port of Loading : Visakhapatnam, India HR Coils

18 Rourkela Producing : Rourkela Electrical s Material : Cold Rolled Non-Oriented in Decarburised, fully Annealed condition with large grain size, graded on the basis of Epstein Core loss testing at 1.5 Tesla induction for 50 Hz. Grade : M-43, M-45, M-47 as per ASTM A 677 Specification Coating : C-3 (Organic Coating) with 2-3 Micron and C-6 (Semi-Organic Coating) with Micron Size : 0.5 mm. x 1000 mm. Cold ID : 510 mm. Tolerance : Thickness : +/-0.04 mm. Width : -0/+1.5 mm. Camber : 1.0 mm. max. per 2000 mm. length Flatness : 2% Max. (wave height / wave length x 100) Bow Height : 10 mm. max. at 0.5 metre length (500 mm. length) Burr Height : 50 micron max. Stacking Factor : 95-97% for 0.5 mm. thick depending on coating thickness Mechanical : (Values are typical but not Guaranteed) properties Grade Hardness Y.S. U.T.S. El% Core Loss (HRB) (Kg/sq. mm.) (Kg./sq. mm.) (max) M M M Guaranteed : (Minimum Induction (Magnetic Flux Density) at 5000 A/m) Magnetic Grade Minimum Induction Properties M M M Coil Weight : metric tonnes Electrical s Packing : Coils will be in horizontal eye position strapped with 4 eye and 3 circumferential High Tensile Straps Material is first wrapped with VCI film and then with polythene type sheet followed with additional layers of stretch film coating. It is then packed in Galvanised sheets metal packing. Metallic collars are provided in the eye of the coil and on the outer diameter Inspection : By Rourkela Port of Loading : Visakhapatnam, India

19 Rourkela Mild Chequered Sheets/Plates Producing : Rourkela Specification : A) Quality : IS-3502 (Base conforming to IS 2062 GR. B Killed Processed through Concast Route) in Mill Edge condition B) Technical Delivery Conditions: As Coils As Sheets / Plates Coil ID : 760 mm. Thickness : 4-10 mm. Coil OD : 1850 mm. max. Width : 1250 mm. Coil wt. : 9 to 15 metric tonnes Length : 5000/6300/ Telescopicity : 50 mm. max. 10,000 mm. Tongue : 500 mm. max. & Fish Tail aiming to zero Chequered Pattern : Tear drop only Bead Height : 0.8 mm mm. Tolerance on Width : -0 / +20 mm. Packing Condition : Bare, with high tensile straps of 3 nos. through eye and 2 nos. on circumference Basis of Invoicing : As per Net Weight mentioned in the Cloth Identification Tag and Invoice Size/Quantity : Thickness : 4-10 mm. Width : 1250 mm. For Non-Standard : Orders in mm. can be considered only in case of substantial orders Widths on mutual acceptance Marking : Coil No., Size and Grade will be painted on each coil. A cloth identification tag will be fixed on the inner eye of each coil indicating Coil no., Size, Grade, Net Weight and Contract No. Inspection : By Rourkela Port of Loading : Visakhapatnam, India Chequered Plates

20 Customised Products through Service Centre Any requirement for cut-to-size Hot-rolled and Cold-rolled materials can be met through our Joint Venture Service Sentre M/s SBSCL located at Bokaro.

21 SAIL s Customised Products Through Service Centre Hot Rolled Coils Coil ID : mm. Coil OD : mm. Coil Weight (max.) : 16 metric tonnes Slit Width Tolerance : +/- 0.2 mm. Maximum Slit Width : 1600 mm. Minimum Slit Width : 65 mm. Cold Rolled Coils Coil ID : mm. Coil OD : mm. Slit Width Tolerance : +/- 0.2 mm. Maximum Slit Width : 1600 mm. Minimum Slit Width : 65 mm. Hot Rolled Sheets / Plates Minimum Length : 350 mm. Maximum Length : 5000 mm. Tolerance : +5 / -0 mm. Cold Rolled Sheets Minimum Length : 200 mm. Maximum Length : 4000 mm. Tolerance : / -0 mm. Customised Products

22 Enquiries for SAIL s carbon steel products may be sent to : International Trade Division Hindustan Times House, 13th Floor, 18-20, Kasturba Gandhi Marg, New Delhi , India. Tel. No. : , Fax : , , sailitd@vsnl.com (The details given in this brochure are only by way of general information and do not constitute a formal offer.)