Introduction to Aluminum Alloys and Tempers
|
|
- Anthony McDonald
- 6 years ago
- Views:
Transcription
1 Introduction to Aluminum Alloys and Tempers J. Gilbert Kaufman ASM International Materials Park, OH
2 Copyright 2000 by ASM International All rights reserved No part of this book may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the written permission of the copyright owner. First printing, November 2000 Great care is taken in the compilation and production of this Volume, but it should be made clear that NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE GIVEN IN CONNECTION WITH THIS PUBLICATION. Although this information is believed to be accurate by ASM, ASM cannot guarantee that favorable results will be obtained from the use of this publication alone. This publication is intended for use by persons having technical skill, at their sole discretion and risk. Since the conditions of product or material use are outside of ASM s control, ASM assumes no liability or obligation in connection with any use of this information. No claim of any kind, whether as to products or information in this publication, and whether or not based on negligence, shall be greater in amount than the purchase price of this product or publication in respect of which damages are claimed. THE REMEDY HEREBY PROVIDED SHALL BE THE EXCLUSIVE AND SOLE REMEDY OF BUYER, AND IN NO EVENT SHALL EITHER PARTY BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHETHER OR NOT CAUSED BY OR RESULT- ING FROM THE NEGLIGENCE OF SUCH PARTY. As with any material, evaluation of the material under end-use conditions prior to specification is essential. Therefore, specific testing under actual conditions is recommended. Nothing contained in this book shall be construed as a grant of any right of manufacture, sale, use, or reproduction, in connection with any method, process, apparatus, product, composition, or system, whether or not covered by letters patent, copyright, or trademark, and nothing contained in this book shall be construed as a defense against any alleged infringement of letters patent, copyright, or trademark, or as a defense against liability for such infringement. Comments, criticisms, and suggestions are invited, and should be forwarded to ASM International. ASM International staff who worked on this project included Veronica Flint, Manager, Book Acquisitions; Bonnie Sanders, Manager, Production; Carol Terman, Copy Editor; Kathy Dragolich, Production Supervisor; and Scott Henry, Assistant Director, Reference Publications. Library of Congress Cataloging-in-Publication Data Kaufman, J. G. (John Gilbert), Introducton to aluminum alloys and tempers / J. Gilbert Kaufman. p. cm. Includes bibliographical references and index. 1. Aluminum alloys. 2. Metals Heat treatment. I. Title. TA480.A6 K dc ISBN X SAN: ASM International Materials Park, OH Printed in the United States of America
3 Contents Preface...vii CHAPTER 1: Introduction: The Nature of the Problem... 1 The Keys to Understanding...2 Characteristics of Wrought Aluminum Alloys...3 Characteristics of Cast Aluminum Alloys...5 Definitions for Aluminum and Aluminum Alloys...5 Applications of Aluminum Alloys...7 Microscopy of Aluminum and Aluminum Alloys...7 Units and Unit Conversion...7 CHAPTER 2: Aluminum Alloy and Temper Designation Systems of the Aluminum Association...9 Wrought Aluminum Alloy Designation System Cast Aluminum Alloys Designation System...11 Designations for Experimental Aluminum Alloys...16 Aluminum Alloy Temper Designation System...16 Basic Temper Designations Subdivisions of the Basic Tempers...17 Summary...22 CHAPTER 3: Understanding Wrought and Cast Aluminum Alloys Designations...23 The Wrought Alloy Series...23 How the System is Applied...23 Principal Alloying Elements...25 Understanding Wrought Alloy Strengthening Mechanisms...25 Understanding Wrought Alloy Advantages and Limitations...26 Other Characteristics Related to Principal Alloying Element...28 Understanding Wrought Alloy Variations...30 Links to Earlier Alloy Designations...31 Unified Numbering System (UNS) Alloy Designation System for Wrought Alloys...31 The Cast Alloy Series iii
4 How the Current Aluminum Cast Alloy Designation System is Applied...32 Understanding Cast Alloy Strengthening Mechanisms...33 Understanding Cast Alloy Advantages and Limitations...34 Examples of the Use of Variations in Cast Alloy Designations...35 Alloys for Different Casting Processes...35 Other Characteristics Related to Composition...35 Evolution of the Aluminum Cast Alloy Designation System...35 UNS Alloy Designation System for Cast Alloys...36 CHAPTER 4: Understanding the Aluminum Temper Designation System Tempers for Wrought Aluminum Alloys...39 Review of the Basic Tempers for Wrought Alloys...57 Subdivisions of the Basic Tempers...60 Tempers Designating Residual Stress Relief of Heat Treated Products...67 Temper Designations Identifying Modifications in Quenching...68 Designations Indicating Heat Treatment by User...68 Tempers Identifying Additional Cold Work between Quenching and Aging...70 Tempers Identifying Additional Cold Work Following Aging...70 Tempers Designating Special Corrosion-Resistant Tempers...71 Temper Designation for Special or Premium Properties...71 Tempers for Cast Aluminum Alloys...73 Review of the Basic Tempers for Cast Alloys...73 Subdivisions of the Basic Temper Types for Cast Alloys...74 Importance to Understanding Aluminum Tempers...76 CHAPTER 5: Understanding Aluminum Fabricating Processes...77 Ingot and Billet Casting Strip and Slab Casting...78 Hot and Cold Rolling...78 Extrusion...79 Forging...79 Cast Parts...80 Permanent Mold Casting...80 Sand Casting...81 iv
5 Investment Casting...82 Die Casting...83 Combinations of Casting and Forging...84 Heat Treatment of Aluminum Alloys...84 CHAPTER 6: Applications for Aluminum Alloys and Tempers...87 Applications by Alloy Class...87 Wrought Alloys...87 Cast Alloys Applications by Market Area Electrical Markets Building and Construction Markets Transportation Applications Marine Transportation Rail Transportation Packaging Applications Petroleum and Chemical Industry Components Other Markets CHAPTER 7: Representative Micrographs Wrought Aluminum Alloys Welded Wrought Aluminum Alloys Brazed Joints Cast Aluminum Alloys Welded Cast Aluminum Alloys Welded Wrought-To-Cast Alloys Welded Aluminum To Steel Welded Aluminum to Copper CHAPTER 8: Selected References APPENDIX Subject Index Alloy Index Cast Alloys Wrought Alloys v
6 ASM International Technical Books Committee ( ) Sunniva R. Collins (Chair) Swagelok/Nupro Company Eugen Abramovici Bombadier Aerospace (Canadair) A.S Brar Seagate Technology Inc. Ngai Mun Chow Det Norske Veritas Pte Ltd. Seetharama C. Deevi Phillip Morris, USA Bradley J. Diak Queen s University Dov B. Goldman Precision World Products James F.R. Grochmal Metallurgical Perspectives Nguyen P. Hung Nanyang Technological University Serope Kalpakjian Illinois Institute of Technology Gordon Lippa North Star Casteel Jacques Masounave Université du Québec Charles A. Parker (Vice Chair) AlliedSignal Aircraft Landing Systems K. Bhanu Sankara Rao Indira Gandhi Centre for Atomic Research Mel M. Schwartz Sikorsky Aircraft Corporation (retired) Peter F. Timmins University College of the Fraser Valley George F. Vander Voort Buehler Ltd. vi
7 Preface The idea for this timely reference book was originally suggested by Tom Croucher, a California-based consulting metallurgist. Dr. Croucher and Harry Chandler of ASM International provided input for the first draft version. I broadened it out substantially to cover the understanding of the advantages and limitations of aluminum alloy/temper combinations in terms of the relationship of their composition, process history, and microstructure to service requirements. I would like to acknowledge Dr. John A. S. Green and the Aluminum Association, Inc. for making available critically important material for inclusion in this book. Among the Aluminum Association publications used as key references, notably on the alloy and temper designation system and aluminum terminology, were the following: O Aluminum Standards and Data O Standards for Aluminum Sand and Permanent Mold Castings O Aluminum: Technology, Applications, and Environment More complete citations to these and other reference materials are given in the Selected References, Chapter 8. Among the ASM International books used as major sources, most notably for micrographs, are the following: O Heat Treater s Guide: Practices and Procedures for Nonferrous Alloys O ASM Specialty Handbook: Aluminum and Aluminum Alloys Finally, I want to acknowledge the publications of the American Foundrymen s Society, Inc. and the Diecasting Development Council, whose publications Aluminum Casting Technology and Product Design for Die Casting, respectively, provided excellent resources for casting terminology and descriptions of casting procedures. J. Gilbert Kaufman Columbus, Ohio vii
8 ASM International is the society for materials engineers and scientists, a worldwide network dedicated to advancing industry, technology, and applications of metals and materials. ASM International, Materials Park, Ohio, USA This publication is copyright ASM International. All rights reserved. Publication title Product code Introduction to Aluminum Alloys and Tempers #06180G To order products from ASM International: Online Visit /bookstore Telephone (US) or (Outside US) Fax Mail Customer Service, ASM International 9639 Kinsman Rd, Materials Park, Ohio , USA CustomerService@asminternational.org In Europe In Japan American Technical Publishers Ltd Knowl Piece, Wilbury Way, Hitchin Hertfordshire SG4 0SX, United Kingdom Telephone: (account holders), (credit card) Neutrino Inc. Takahashi Bldg., 44-3 Fuda 1-chome, Chofu-Shi, Tokyo 182 Japan Telephone: 81 (0) Terms of Use. This publication is being made available in PDF format as a benefit to members and customers of ASM International. You may download and print a copy of this publication for your personal use only. Other use and distribution is prohibited without the express written permission of ASM International. No warranties, express or implied, including, without limitation, warranties of merchantability or fitness for a particular purpose, are given in connection with this publication. Although this information is believed to be accurate by ASM, ASM cannot guarantee that favorable results will be obtained from the use of this publication alone. This publication is intended for use by persons having technical skill, at their sole discretion and risk. Since the conditions of product or material use are outside of ASM's control, ASM assumes no liability or obligation in connection with any use of this information. As with any material, evaluation of the material under end-use conditions prior to specification is essential. Therefore, specific testing under actual conditions is recommended. Nothing contained in this publication shall be construed as a grant of any right of manufacture, sale, use, or reproduction, in connection with any method, process, apparatus, product, composition, or system, whether or not covered by letters patent, copyright, or trademark, and nothing contained in this publication shall be construed as a defense against any alleged infringement of letters patent, copyright, or trademark, or as a defense against liability for such infringement.
Corrosion of Weldments
Corrosion of Weldments Edited by J. R. Davis Davis & Associates ASM International Materials Park, OH 44073-0002 Copyright 2006 by ASM International All rights reserved No part of this book may be reproduced,
More informationSurface Hardening of Steels Understanding the Basics
Surface Hardening of Steels Understanding the Basics Edited by J.R. Davis Davis & Associates ASM International Materials Park, OH 44073-0002 Copyright 2002 by ASM International All rights reserved No part
More informationSTEEL METALLURGY FOR THE NON-METALLURGIST
STEEL METALLURGY FOR THE NON-METALLURGIST JOHN D. VERHOEVEN ASM International Materials Park, Ohio 44073-0002 Copyright 2007 by ASM International All rights reserved No part of this book may be reproduced,
More informationRelational Analysis. Guidelines for Estimating the High- and Low-Temperature Properties of Metals J. GILBERT KAUFMAN
Relational Analysis Guidelines for Estimating the High- and Low-Temperature Properties of Metals J. GILBERT KAUFMAN ASM International Materials Park, Ohio 44073-0002 Copyright 2011 by ASM International
More informationPROPERTIES OF ALUMINUM ALLOYS
PROPERTIES OF ALUMINUM ALLOYS Fatigue Data and the Effects of Temperature, Product Form, and Processing J. GILBERT KAUFMAN ASM International Materials Park, Ohio 44073-0002 Copyright 2008 by ASM International
More informationSurface Wear Analysis, Treatment, and Prevention R. Chattopadhyay
Surface Wear Analysis, Treatment, and Prevention R. Chattopadhyay Materials Park, OH 44073-0002 Copyright 2001 by ASM International All rights reserved No part of this book may be reproduced, stored in
More informationEngineering Properties of Magnesium Alloys
Engineering Properties of Magnesium Alloys Edited by ASM International Staff Karen Marken, Senior Managing Editor Scott Henry, Senior Content Engineer Afina Lupulescu, Ph.D., Senior Content Developer Tyler
More informationSheet Metal Forming FUNDAMENTALS. Edited by Taylan Altan and A. Erman Tekkaya
Sheet Metal Forming FUNDAMENTALS Edited by Taylan Altan and A. Erman Tekkaya Materials Park, Ohio 44073-0002 Copyright 2012 by All rights reserved No part of this book may be reproduced, stored in a retrieval
More informationALLOYING ASM International
ALLOYING UNDERSTANDING THE BASICS Edited by J.R. Davis Davis & Associates ASM International Materials Park, Ohio 44073-0002 Copyright 2001 by ASM International All rights reserved No part of this book
More informationHandbook of Workability and Process Design
Handbook of Workability and Process Design Edited by Howard A. Kuhn S. Lee Semiatin INTERNATIONAL The Materials Information Society R Copyright 2003 by ASM International All rights reserved No part of
More informationMetallographic Etching
Metallographic Etching 2nd Edition By Günter Petzow In collaboration with Veronika Carle Translated by Uta Harnisch Techniques for Metallography Ceramography Plastography Contents Preface to the German
More informationPLASTICS. Characterization and Failure Analysis of.
Characterization and Failure Analysis of PLASTICS Copyright 2003 by ASM International All rights reserved No part of this book may be reproduced, stored in a retrieval system, or transmitted, in any form
More informationAdvanced High-Strength Steels
Advanced High-Strength Steels Science, Technology, and Applications Mahmoud Y. Demeri ASM International Materials Park, Ohio 44073-0002 Copyright 2013 by ASM International All rights reserved No part of
More informationElementary Materials Science
Elementary Materials Science William F. Hosford ASM International Materials Park, Ohio 44073-0002 www.asminternational.org Copyright 2013 by ASM International All rights reserved No part of this book may
More informationSURFACE ENGINEERING FOR CORROSION AND WEAR RESISTANCE. Edited by. J.R. Davis Davis & Associates
SURFACE ENGINEERING FOR CORROSION AND WEAR RESISTANCE Edited by J.R. Davis Davis & Associates Materials Park, OH 44073-0002 IOM Communications is a wholly owned subsidiary of the Institute of Materials
More informationEdited by Konrad Herrmann
Edited by Konrad Herrmann ASM International Materials Park, Ohio 44073-0002 Copyright 2011 by ASM International All rights reserved No part of this book may be reproduced, stored in a retrieval system,
More informationPractical Induction Heat Treating
2001 ASM International. All Rights Reserved. Practical Induction Heat Treating (#06098G) Practical Induction Heat Treating Richard E. Haimbaugh Materials Park, Ohio 44073-0002 2001 ASM International. All
More informationInduction Heat Treating
Practical Induction Heat Treating Second Edition Richard E. Haimbaugh Materials Park, Ohio 44073-0002 www.asminternational.org Copyright 2015 by ASM International All rights reserved No part of this book
More informationHigh-Temperature Transformation Processes in Cu-13.4Al-5Ni Shape Memory Alloy Single Crystals M. Benke, V. Mertinger, and L.
JMEPEG (2009) 18:496 499 ÓASM International DOI: 10.1007/s11665-009-9397-7 1059-9495/$19.00 High-Temperature Transformation Processes in Cu-13.4Al-5Ni Shape Memory Alloy Single Crystals M. Benke, V. Mertinger,
More information2002 ASM International. All Rights Reserved. Ceramography: Preparation and Analysis of Ceramic Microstructures (#06958G) Ceramography
Ceramography Preparation and Analysis of Ceramic Microstructures Richard E. Chinn www.acers.org Copyright 2002 by ASM International All rights reserved No part of this book may be reproduced, stored in
More informationContents ASM International. All Rights Reserved. ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys (#06178G)
Contents Introduction to Nickel and Nickel Alloys....................... 1 The Nickel Industry: Occurrence, Recovery, and Consumption....... 3 Uses of Nickel.............................................
More informationFundamentals of Electrochemical Corrosion
2000 ASM International. All Rights Reserved. Fundamentals of Electrochemical Corrosion (#06594G) www.asminternational.org Fundamentals of Electrochemical Corrosion E.E. Stansbury Professor Emeritus Department
More informationTHE SIGNIFICANCE OF MELT PRACTICE ON FATIGUE PROPERTIES OF SUPERELASTIC NITI FINE DIAMETER WIRE
Proceedings of the International Conference on Shape Memory and Superelastic Technologies May 7 11, 2006, Pacific Grove, California, USA Brian Berg, M.R. Mitchell, and Jim Proft, editors, p 43-52 Copyright
More informationNovel Dielectric Etch Chemistry for the next generation of Circuit Edit: Delicate to Low-k Dielectrics and Silicon
ISTFA 2009, Conference Proceedings from the 35th International Symposium for Testing and Failure Analysis November 15 19, 2009, San Jose, California, USA, p 106-109 Copyright 2009 ASM International All
More informationMetallographic Polishing by Mechanical Methods
Metallographic Polishing by Mechanical Methods Fourth Edition Leonard E. Samuels ASM International Materials Park, OH 44073-0002 Copyright 2003 by ASM International All rights reserved No part of this
More informationComparative World. Standards. Handbook of. 5th Edition. John E. Bringas, Editor. Bringas. 5th Edition. Handbook of ASTM INTERNATIONAL DS67D
Bringas Handbook of Comparative World Steel Standards The book editor, John E. Bringas, P.Eng., is president and founder of Codes and Standards Training Institute (CASTI), headquartered in Edmonton, Alberta,
More information2. OVERVIEW OF INDUSTRIAL APPLICATIONS OF INDUCTION HEATING 11
1. INTRODUCTION 1 2. OVERVIEW OF INDUSTRIAL APPLICATIONS OF INDUCTION HEATING 11 2.1. Heat treatment by induction 2.1.1. The basics of metallurgy and principles of heat treatment 2.1.1.1. Crystalline structure
More informationIntroduction* CHAPTER Basic Principles of Extrusion
CHAPTER 1 Introduction* 1.1 Basic Principles of Extrusion THE EXTRUSION OF METALS, in which a billet, usually round, is pressed by a stem at high pressure through a tool of the desired shape, the die,
More informationWELDING METALLURGY AND WELDABILITY OF NICKEL-BASE ALLOYS
WELDING METALLURGY AND WELDABILITY OF NICKEL-BASE ALLOYS John N. DuPont John C. Lippold Samuel D. Kiser A JOHN WILEY & SONS, INC., PUBLICATION WELDING METALLURGY AND WELDABILITY OF NICKEL-BASE ALLOYS
More informationSIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS
SIXTH EDITION MATERIALS FOR ENGINEERS AND TECHNICIANS W. BOLTON & R. A. HIGGINS Materials for Engineers and Technicians A comprehensive yet accessible introduction to materials engineering which provides
More informationFire Resistance of Aluminum and Aluminum Alloys
Fire Resistance of Aluminum and Aluminum Alloys & Measuring the Effects of Fire Exposure on the Properties of Aluminum Alloys J. Gilbert Kaufman ASM International Materials Park, OH 44073-0002 Copyright
More informationContents. A detailed Table of Contents, including a listing of specific alloy datasheets, is included on page iii.
Contents Introduction to Stainless Steels.................................................... 1 Wrought Austenitic Stainless Steels................................................ 7 Wrought Martensitic
More informationDiagnosing and Changing Organizational Culture
Diagnosing and Changing Organizational Culture To download PDFs of the OCAI (Organizational Culture Assessment Instrument) and the MSAI (Management Skills Assessment Instrument) please go to www.josseybass.com/go/cameron.
More informationSTP-PT-026 GUARANTEED HIGHER STRENGTH PROPERTIES
STP-PT-026 GUARANTEED HIGHER STRENGTH PROPERTIES Date of Issuance: January 29, 2009 This report was prepared as an account of work sponsored by ASME Pressure Technologies Codes and Standards and the ASME
More informationCalculation of Heater-tube Thickness in Petroleum Refineries API STANDARD 530 SEVENTH EDITION, APRIL 2015
Calculation of Heater-tube Thickness in Petroleum Refineries API STANDARD 530 SEVENTH EDITION, APRIL 2015 Special Notes API publications necessarily address problems of a general nature. With respect to
More informationForging Processes: Variables and Descriptions
CHAPTER 2 Forging Processes: Variables and Descriptions Manas Shirgaokar 2.1 Introduction In forging, an initially simple part a billet, for example is plastically deformed between two tools (or dies)
More informationSpecification for Pipeline Valves
Specification for Pipeline Valves ANSI/API SPECIFICATION 6D TWENTY-THIRD EDITION, APRIL 2008 EFFECTIVE DATE: OCTOBER 1, 2008 CONTAINS API MONOGRAM ANNEX AS PART OF US NATIONAL ADOPTION ISO 14313:2007 (Identical),
More informationA Compendium of Processing Maps. Second Edition. Edited by. Y.V.R.K. Prasad K.P. Rao S. Sasidhara
Hot Working Guide A Compendium of Processing Maps Second Edition Edited by Y.V.R.K. Prasad K.P. Rao S. Sasidhara ASM International Materials Park, Ohio 44073-0002 Copyright 2015 by ASM International All
More informationWELDING METALLURGY SECOND EDITION Sindo Kou Professor and Chair Department of Materials Science and Engineering University of Wisconsin A JOHN WILEY & SONS, INC., PUBLICATION WELDING METALLURGY SECOND
More informationLocking Systems International Inc.
To Order: Locking Systems International Inc 1-800-657-LOCK(5625) or 407-298-9895 Fax: 1-800-895-0706 E-Mail: sales@lockingsystems.com www.lockingsystems.com Terms: Minimum order $15.00 COD - Company Check
More informationPapers focusing on magnesium metallurgy and casting, compiled from the Transactions of the American Foundry Society and the International Journal of
Papers focusing on magnesium metallurgy and casting, compiled from the Transactions of the American Foundry Society and the International Journal of Metalcasting, and articles from Modern Casting and Metal
More informationCRA Clad or Lined Steel Pipe
CRA Clad or Lined Steel Pipe API SPECIFICATION 5LD FOURTH EDITION, MARCH 2015 API MONOGRAM PROGRAM EFFECTIVE DATE: SEPTEMBER 3, 2015 Special Notes API publications necessarily address problems of a general
More informationStandard Classification for Temper Designations for Copper and Copper Alloys Wrought and Cast 1
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because it may not be technically
More informationCarbon Forged Steel Fittings
SALES CENTER/WAREHOUSE 14496 CROGHAN PIKE P.O. BOX 330 MT. UNION, PA 17066 (814) 542-2545 (800) 345-7546 FAX (814) 542-9977 bfsales@bonneyforge.com www.bonneyforge.com PRICE SCHEDULE L-140 Effective January
More informationCarbon Forged Steel Fittings
BONNEY FORGE SALES CENTER/WAREHOUSE 14496 CROGHAN PIKE P.O. BOX 330 MT. UNION, PA 17066 (814) 542-2545 (800) 345-7546 FAX (814) 542-9977 TELEX 910-240-9091 E-MAIL: bfsales@bonneyforge.com WEB SITE: http://www.bonneyforge.com
More informationSeismic Design Procedures and Criteria for Offshore Structures
Seismic Design Procedures and Criteria for Offshore Structures ANSI/API RECOMMENDED PRACTICE 2EQ FIRST EDITION, NOVEMBER 2014 ISO 19901-2:2004 (Modified), Petroleum and natural gas industries Specific
More informationCold and Hot Forging
2005 ASM International. All Rights Reserved. Cold and Hot Forgings: Fundamentals and Applications (#05104G) www.asminternational.org Cold and Hot Forging Fundamentals and Applications Edited by Taylan
More informationManual of Petroleum Measurement Standards Chapter 11 Physical Properties Data
Manual of Petroleum Measurement Standards Chapter 11 Physical Properties Data Section 2, Part 5 A Simplified Vapor Pressure Correlation for Commercial NGLs ASTM Technical Publication [Stock No. PETROLTBL-TP15]
More informationABP Solution For Surface
ABP Solution For Surface ABP ASSAB recognises the need for a one-stop solution for tooling customers and hence, we constantly strive to enhance our service portfolio in the automotive, packaging and construction
More informationSTRUCTURAL STABILITY OF STEEL: CONCEPTS AND APPLICATIONS FOR STRUCTURAL ENGINEERS
STRUCTURAL STABILITY OF STEEL: CONCEPTS AND APPLICATIONS FOR STRUCTURAL ENGINEERS Structural Stability of Steel: Concepts and Applications for Structural Engineers Theodore V. Galambos Andrea E. Surovek
More informationNew Methods for the. Consolidation of Metal Powders
New Methods for the Consolidation of Metal Powders PERSPECTIVES IN POWDER METALLURGY Fundamentals, Methods, and Applications In Preparation Volume 2 Vibratory Compacting-Principles and Methods Volume 3
More informationMETAL MATRIX COMPOSITES. A Study of Patents, Patent Applications and Other Literature
METAL MATRIX COMPOSITES A Study of Patents, Patent Applications and Other Literature METAL MATRIX COMPOSITES A Study of Patents, Patent Applications and Other Literature Edited by SEBASTIAAN A. GIESKES
More informationContents. Preface. Lightweight Materials Understanding the Basics F.C. Campbell, editor
Lightweight Materials Understanding the Basics F.C. Campbell, editor Copyright 2012 ASM International All rights reserved www.asminternational.org Contents Preface ix CHAPTER 1 Introduction and Uses of
More informationTo access full version from the Copper Development Association website, please click here.
Guide to Nickel Aluminium Bronze for Engineers To access full version from the Copper Development Association website, please click here. Guide to Nickel Aluminium Bronze for Engineers Ivan Richardson,
More informationINTERNATIONAL PROJECT MANAGEMENT:
INTERNATIONAL PROJECT MANAGEMENT: LEADERSHIP IN COMPLEX ENVIRONMENTS International Project Management: Leadership in Complex Environments Copyright 2010 John Wiley & Sons, Inc. ISBN: 978-0-470-57882-7
More informationLinings of Aboveground Petroleum Storage Tank Bottoms API RECOMMENDED PRACTICE 652 FOURTH EDITION, SEPTEMBER 2014
Linings of Aboveground Petroleum Storage Tank Bottoms API RECOMMENDED PRACTICE 652 FOURTH EDITION, SEPTEMBER 2014 Special Notes API publications necessarily address problems of a general nature. With respect
More informationMACHINABILITY OF ENGINEERING MATERIALS
MACHINABILITY OF ENGINEERING MATERIALS Machinability of Engineering Materials B. MILLS B.SC., M.Sc., Ph.D., C.Eng., F.LM., M.Inst.P. and A. H. REDFORD B.Sc., Ph.D., A.R.T.C.S. Department of Aeronautical
More informationManaging Exports Navigating the Complex Rules, Controls, Barriers, and Laws Frank Reynolds
Managing Exports Navigating the Complex Rules, Controls, Barriers, and Laws Frank Reynolds JOHN WILEY & SONS, INC. Managing Exports Managing Exports Navigating the Complex Rules, Controls, Barriers,
More informationEXTRUSION SECOND EDITION. Editors. M. Bauser G. Sauer K. Siegert. Translated from German by. A.F. Castle
EXTRUSION SECOND EDITION Editors M. Bauser G. Sauer K. Siegert Translated from German by A.F. Castle ASM International Materials Park, Ohio 44073-0002 Copyright 2006 by ASM International All rights reserved
More informationANCHORAGE DESIGN FOR PETROCHEMICAL FACILITIES
ANCHORAGE DESIGN FOR PETROCHEMICAL FACILITIES PREPARED BY Task Committee on Anchorage of the Petrochemical Committee of the Energy Division of the American Society of Civil Engineers 1801 ALEXANDER BELL
More informationAbout This Book. Why is this topic important? What can you achieve with this book? How is this book organized?
About This Book Why is this topic important? Trainers sometimes fail to ask enough questions or the right question prior to designing, redesigning, or presenting a training program as the solution to a
More informationStrategy, Planning, and Operation
GLOBAL EDITION Supply Chain Management Strategy, Planning, and Operation FIFTH EDITION Sunil Chopra Peter Meindl Editorial Director: Sally Yagan Editor in Chief: Donna Battista Senior Acquisitions Editor:
More informationAluminum Alloy and Temper Designation Systems of the Aluminum Association
Introduction to Aluminum Alloys and Tempers J. Gilbert Kaufman, p9-22 DOI:10.1361/iaat2000p009 Copyright 2000 ASM International All rights reserved. www.asminternational.org CHAPTER 2 Aluminum Alloy and
More informationISO INTERNATIONAL STANDARD. Light metals and their alloys Titanium and titanium alloys Classification and terminology
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 28401 First edition 2010-12-01 Light metals and their alloys Titanium and titanium alloys Classification and terminology Métaux légers et leurs
More informationGuidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries
http://www.booksfiles.org/637-api-rp-939-c.html Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries Downstream Segment API RECOMMENDED PRACTICE 939-C FIRST EDITION, MAY
More informationMetal Forming Process. Prof.A.Chandrashekhar
Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which
More informationHow to Estimate with. RSMeans Data
How to Estimate with RSMeans Data How to Estimate with RSMeans Data Basic Skills for Building Construction Fourth Edition RSMeans and Saleh A. Mubarak, Ph.D. Barbara Balboni, Technical Editor RSMeans
More informationS8VM Series Replacement Brackets
Original model Bottom mounting Front mounting Side mounting Original model: S8VM Replacement model: S8FS-G Replacement bracket Model scheduled to be discontinued Recommended replacement model Model Page
More informationISO INTERNATIONAL STANDARD. Microstructure of cast irons Part 1: Graphite classification by visual analysis
INTERNATIONAL STANDARD ISO 945-1 First edition 2008-11-15 Microstructure of cast irons Part 1: Graphite classification by visual analysis Microstructure des fontes Partie 1: Classification du graphite
More informationBrittle Materials: Principles
CHAPTER 9 Brittle Materials: Principles THE DISCUSSION in earlier chapters was confined to ductile materials. That is, to materials that, when deformed in bulk, plastically deform a significant amount
More informationTool and Die Making Troubleshooter
Tool and Die Making Troubleshooter Richard M. Leed Society of Manufacturing Engineers Dearborn, Michigan Association for Forming & Fabricating Technologies/SME Copyright 2003 by the Society of Manufacturing
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5659L Issued SEP 1965 Revised JAN 2004 Superseding AMS 5659K Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu
More informationSteel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53
Steel Forgings: Design, Production, Selection, Testing, and Application Edward G. Nisbett ASTM Stock No. MNL53 INTERNATIONAL Standards Worldwide ASTM International 100 Barr Harbor Drive PO Box C700 West
More informationMetals in AMERICA THE HISTORY OF. CHARLES R. SIMCOE Edited by Frances Richards. The History of Metals in America SIMCOE
SIMCOE THE HISTORY OF The History of Metals in America Metals in AMERICA CHARLES R. SIMCOE Edited by Frances Richards ASM International Materials Park, Ohio 44073-0002 www.asminternational.org 6775_Book.indb
More informationSummary of Aluminum Producer Net Shipments 1 April 2018 May 31, 2018
Ryan Olsen V.P. Business Information & Statistics 1-703-358-2984 E-mail: rolsen@aluminum.org Henry F. Sattlethight Manager, Statistical Programs 1-703-358-2985 E-mail: hsattlethight@aluminum.org Summary
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 6414K Issued JAN 1964 Revised FEB 2007 Superseding AMS 6414J Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38-0.43C) (SAE 4340) Vacuum Consumable Electrode
More informationASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE. Part B Nonferrous Material Specifications
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE II Materials Part B Nonferrous Material Specifications 4. 2013 ASME FINAL Covers_II Part B MECH 5.9.indd 1 5/15/13 5:30 PM AN INTERNATIONAL
More informationISO 9588 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9588 Second edition 2007-12-15 Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen Revêtements métalliques et autres
More informationFlowmeters for System Applications
Electronic Document A Prepared by ITA Technical Committee, Design Subcommittee, Task Force on Flowmeters Thomas J. McBride, Chair Rodney L. Hackney, Vice-Chair Prepared under the Direction of ITA s Design
More informationSummary of Aluminum Producer Net Shipments 1 December 2018 January 29, 2018
Ryan Olsen V.P. Business Information & Statistics 1-703-358-2984 E-mail: rolsen@aluminum.org Henry F. Sattlethight Manager, Statistical Programs 1-703-358-2985 E-mail: hsattlethight@aluminum.org Summary
More informationJOHN BASCHAB JON PIOT
T H E PROFESSIONAL SERVICES FIRM BIBLE JOHN BASCHAB JON PIOT John Wiley & Sons, Inc. T H E PROFESSIONAL SERVICES FIRM BIBLE T H E PROFESSIONAL SERVICES FIRM BIBLE JOHN BASCHAB JON PIOT John Wiley & Sons,
More informationAtmospheric hydrocarbon emissions from marine vessel transfer operations
API Manual of Petroleum Measurement Standards Chapter 19.5 (Formerly, API Publication 2514A) EI Hydrocarbon Management HM 65 Atmospheric hydrocarbon emissions from marine vessel transfer operations 1st
More informationSummary of Aluminum Producer Net Shipments 1 February 2019 April 8, 2019
Ryan Olsen V.P. Business Information & Statistics 1-703-358-2984 E-mail: rolsen@aluminum.org Henry F. Sattlethight Manager, Statistical Programs 1-703-358-2985 E-mail: hsattlethight@aluminum.org Summary
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 2759/3D Issued OCT 1984 Revised FEB 2005 Superseding AMS 2759/3C Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts 1. SCOPE: This specification,
More informationThe Procurement and Supply Manager s Desk Reference
The Procurement and Supply Manager s Desk Reference The Procurement and Supply Manager s Desk Reference Second Edition FRED SOLLISH, MS JOHN SEMANIK, MBA John Wiley & Sons, Inc. Copyright 2012 by John
More informationSpecification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry ANSI/API SPECIFICATION Q1 EIGHTH EDITION, DECEMBER 2007 EFFECTIVE DATE: JUNE 15, 2008 CONTAINS API MONOGRAM
More informationCommonsense Talent Management
Commonsense Talent Management Commonsense Talent Management USING STRATEGIC HUMAN RESOURCES TO IMPROVE COMPANY PERFORMANCE Steven T. Hunt Copyright 2014 by John Wiley & Sons, Inc. All rights reserved.
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5643Q Issued OCT 1951 Revised JAN 2003 Superseding AMS 5643P Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
More informationISO 9587 INTERNATIONAL STANDARD. Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
INTERNATIONAL STANDARD ISO 9587 Second edition 2007-11-15 Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement Revêtements métalliques et autres
More informationIntroduction to Fundamentals of Modeling for Metals Processing
Introduction to Fundamentals of Modeling for Metals Processing D.U. Furrer, Rolls-Royce Corporation S. L. Semiatin, Air Force Research Laboratory THE FORMULATION AND APPLICATION of modeling and simulation
More informationSTRATEGIC MARKETING FOR HEALTH CARE ORGANIZATIONS
STRATEGIC MARKETING FOR HEALTH CARE ORGANIZATIONS Building a Customer-Driven Health System PHILIP KOTLER, JOEL SHALOWITZ, AND ROBERT J. STEVENS STRATEGIC MARKETING FOR HEALTH CARE ORGANIZATIONS STRATEGIC
More informationBusiness Intelligence Competency Centers A Team Approach to Maximizing Competitive Advantage
Business Intelligence Competency Centers A Team Approach to Maximizing Competitive Advantage Gloria J. Miller Dagmar Bräutigam Stefanie V. Gerlach John Wiley & Sons, Inc. Business Intelligence Competency
More informationBridge Design and Evaluation
Bridge Design and Evaluation Bridge Design and Evaluation LRFD and LRFR Gongkang Fu John Wiley & Sons, Inc. Cover Design: Michael Rutkowski Cover Photograph: Courtesy of Alamy Creativity/Alamy This book
More informationOracle Production Scheduling
Oracle Production Scheduling Installation Guide Release 12.2 Part No. E48798-02 August 2014 Oracle Production Scheduling Installation Guide, Release 12.2 Part No. E48798-02 Copyright 2008, 2014, Oracle
More informationStandard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes 1
Designation: B 124/B 124M 06 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes 1 This standard is issued under the fixed designation B 124/B 124M; the number immediately following
More informationMetallurgical and Ceramic Protective Coatings
Metallurgical and Ceramic Protective Coatings Metallurgical and Ceramic Protective Coatings Edited by Chemistry Division Naval Research Laboratory Washington D.C. lun! CHAPMAN & HALL London Weinheim. New
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Drilling and well-servicing equipment
INTERNATIONAL STANDARD ISO 14693 First edition 2003-12-15 Petroleum and natural gas industries Drilling and well-servicing equipment Industries du pétrole et du gaz naturel Équipement de forage et d'entretien
More informationTAYLOR FORGE STAINLESS
PRICE SCHEDULE NO. TFS 09-2011 Effective Sept. 1, 2011 Subject to change without notice TAYLOR FORGE STAINLESS ISO 9001-2008 Certified ASME Quality System Certificate Holder - Certificate #QSC 269 1984-2011
More informationPlastic Forming Processes
Plastic Forming Processes Plastic Forming Processes Maurice Reyne First published in France in 2006 by Hermes Science/Lavoisier entitled: Transformations, assemblages et traitements des plastiques First
More information