General-pupose plastics Catalogue
|
|
- Ralph Dixon
- 6 years ago
- Views:
Transcription
1 General-pupose plastics Catalogue
2 High-impact polystyrene AcrylonitrileButadienStyrene HIPS basic product ABS basic product HIPS EM embossed ABS MT matte finish HIPS UVm UV modified (indoor) ABS GL glossy finish HIPS IM improved high-impact ABS EM embossed HIPS FrR freon-resistant ABS UVm UV modified (indoor) HIPS Decor decorative surface ABS IM improved high-impact General-purpose polystyrene AcrylonitrileButadieneStyrene + PolyMethylMethAcrylate GPPS basic product ABS/PMMA 5% acrylic layer thickness 5% GPPS EM embossed (for lightning) ABS/PMMA 10% acrylic layer thickness 10% Extruded acrylic ABS/PMMA % SW ABS/PMMA % UV for sanitary ware UV resistant XT basic product ABS/PMMA % UVm ABS/PMMA % IM UV modified (indoor) improved high-impact ABS/PMMA % HA high adhesion ABS/PMMA % MT matte finish 2
3 HIPS Colour LT Feature Size, mm Thickness, mm / Number of sheets per pallet Gebau HIPS - high impact polystyrene White 5001 gloss/mat 2000 х х mat/mat 1400 х х White (SW) gloss/mat custom. size Opal % gloss/mat 2000 х Opal % gloss/mat 2000 х х Yellow % gloss/mat 2000 х Yellow % gloss/mat 2000 х Orange 137 3% gloss/mat 2000 х Red 209 2% gloss/mat 2000 х Red % gloss/mat 2000 х Red 723 <1% gloss/mat 2000 х Green 182 <1% gloss/mat 2000 х Green 226 <1% gloss/mat 2000 х Available in our offer. Request conditions of production * Other colours, thickness, size, finish Mat/Mat, one or two protective films (static, adhesive) and corona treatment are possible on demand LT - Represented values of Light transmission apply to 3.0mm sheet thickness Colour - Represented images of the colours are relative, on reflected light 3
4 HIPS Colour LT Feature Size, mm Thickness, mm / Number of sheets per pallet Gebau HIPS - high impact polystyrene Green 275 <1% gloss/mat 2000 х Blue 245 <1% gloss/mat 2000 х Blue 300 <1% gloss/mat 2000 х Blue 228 <1% gloss/mat 2000 х Blue 306 0% gloss/mat 2000 х Grey 535 <1% gloss/mat 2000 х Silver 520 0% gloss/mat 2000 х х Brown 218 0% gloss/mat 2000 х Brown 469 0% gloss/mat 2000 х Black 640 0% gloss/mat 2000 х х Available in our offer. Request conditions of production * other colours, thickness, size, finish Mat/Mat, one or two protective films (static, adhesive) and corona treatment are possible on demand LT - Represented values of Light transmission apply to 3.0mm sheet thickness Colour - Represented images of the colours are relative, on reflected light SPECIALTIES on your demand: EM embossed (Semolina) FrR freon-resistant UVm UV modified (indoor) IM improved high-impact 4
5 HIPS Colour Carrier Size, mm Thickness, mm / Number of sheets per pallet Gebau HIPS Decor - with decorative coating Mirror Silver Black 2000 х White 2000 х Mirror Gold Black 2000 х White 2000 х Available in our offer. Request conditions of production * Other variants of Décor (film), colour of the Carrier (HIPS) and sizes are possible on demand. Request conditions of production 5
6 GPPS Colour LT Feature Size, mm Thickness, mm / Number of sheets per pallet Gebau GPPS - general-purpose polystyrene Clear % gloss 2000 х Opal diffus % LT 68%, 1800 х any thickness 2000 х Opal diffus % LT 81%, 1800 х any thickness 2000 х Gebau GPPS EM - embossed Clear 1000 Square prism 1800 х х Rhomb prism 1800 х х Available in our offer. Request conditions of production * Other colours, thickness, size, one or two protective films (static, adhesive) and corona treatment are possible on demand и коронация под заказ LT - Represented values of Light transmission apply to 3.0mm sheet thickness All the GPPS sheets are UV improved but designed for indoor use 6
7 ABS/PMMA Colour Feature Size, mm Thickness, mm / Number of sheets per pallet Gebau ABS/PMMA 5% White gloss custom. size Any colour gloss custom. size Gebau ABS/PMMA 10% White gloss custom. size Any colour gloss custom. size Available in our offer. Request conditions of production * Other colours, thickness, size, one or two protective films (static, adhesive) and corona treatment are possible on demand SPECIALTIES on your demand: % other acrylic layer thickness SW UV UVm IM HA MT for sanitary ware UV resistant UV modified (indoor) improved high-impact high adhesion matte finish 7
8 ABS Colour Feature Size, mm Thickness, mm / Number of sheets per pallet Gebau ABS - acrylonitrilebutadienstyrene Any colour smooth 2000 х smooth 1000 х Black 640 Semolina 1000 х Grey 130 Semolina 1000 х Grey 535 Semolina 1000 х Gebau ABS МТ - matte finish Any colour mat 2000 х mat 1000 х Gebau ABS GL - glossy finish Any colour gloss 2000 х gloss 1000 х Available in our offer. Request conditions of production * Other colours, thickness, size, one or two protective films (static, adhesive) and corona treatment are possible on demand SPECIALTIES on your demand: UVm UV modified (indoor) ORO carrier layer - Regrind - except IM IM improved high-impact ORR carrier and bottom layer - Regrind - except IM EM embossed (Semolina) RRR Regrind - except IM and GL 8
9 XT Colour LT Feature Size, mm Thickness, mm / Number of sheets per pallet Gebau XT - extruded acrylic Clear % gloss 2000 х Opal 5100 gloss 2000 х Any colour gloss 2000 х Available in our offer. Request conditions of production * Other colours, thickness, size, Matte finish, protective film (static, adhesive) on demand LT - Represented values of Light transmission apply to 3.0mm sheet thickness Colour - Represented images of the colours are relative, on reflected light 9
10 Pallet weight HIPS, GPPS sheets per pallet 2000 х netto weight, kg gross weight, kg х х х * Represented gross weight is approximate. Tolerance is ±5% * Represented weight does not apply to the pallets with embossed sheets 10
11 Pallet weight ABS/PMMA 5% sheets per pallet 2000 х netto weight, kg gross weight, kg ABS/PMMA 10% х ABS, ABS MT, ABS GL х х * Represented gross weight is approximate. Tolerance is ±5% * Represented weight does not apply to the pallets with embossed sheets 11
12 Pallet weight XT sheets per pallet 2000 х netto weight, kg gross weight, kg * Represented gross weight is approximate. Tolerance is ±5% * Represented weight does not apply to the pallets with embossed sheets 12
13 Physical properties Property Method Unit HIPS mat/mat HIPS gloss/mat GPPS ABS ABS/PMMA 5% 10% XT GENERAL OPTICAL MECHANICAL IMPACT STRENGTH density ISO 1183 g/cm³ light transmission ASTM D-1003 % flexural modulus ISO 178 MPa flexural strength ISO 178 MPa tensile modulus ISO 527 MPa tensile strength ISO 527 MPa tensile elongation ISO 527 % Charpy (notched) ISO 179 kj/m² Charpy (unnotched) ISO 179 kj/m² NB - < * 1.070* 1.21 THERMAL Vicat softening temperature, VST/B/50 ISO 306 C heat-distortion temperature (A 1.8 MPa) ISO 75 C flammability (d = 1.6mm) UL 94 class HB HB HB ELECTRICAL dielectric permeability (100 Hz) IEC volume resistivity IEC Ω *m >1*10 16 >1*10 16 >1*10 16 surface resistivity IEC Ω >1* >1*10 14 NB = No Break * ABS/PMMA SW 5% и 10% have density 1.1 g/cm 3 Values given in the table are typical but not guaranteed ones. Actual values vary in the production process 13
14 OFFICE: Business Centre Avia Plaza 10 Aviamotornaya St., bldg. 2 Moscow RUSSIA info@gebau.ru SITE: 11 Promyshleny proezd, bldg. 6-1 Elektrostal Moscow region RUSSIA zavod@gebau.ru 14
PRODUCT GUIDE. The highly transparent, durable and widely-used acrylic.
PRODUCT GUIDE The highly transparent, durable and widely-used acrylic. Polycasa N.V., a member of 3A Composites CRYLON EN 03/2017 Polycasa N.V. Van Doornelaan 2a 2440 Geel, Belgium Tel. 00 32 14 57 67
More informationLUCITE DIAKON FROST. The textured surface to provides a matt, non-glossy effect giving a cool, soft look and feel with excellent scratch resistance.
key benefits Frost is an acrylic polymer primarily designed for sheet, profile and tube extrusion where a textured surface and unique diffusing properties are key requirements. This makes Lucite Diakon
More informationLexan* Resin 241R Europe-Africa-Middle East: COMMERCIAL
LEXAN 241R is a medium viscosity multi purpose grade and contains a release agent to ensure easy processing. This grade is UL94-V2 at 0.8 mm approved. MECHANICAL Taber Abrasion, CS-17, 1 kg 10 mg/1000cy
More informationPalight. Flat Foamed PVC Sheet. Tel: +44 (0) Fax: +44 (0)
Palight Flat Foamed PVC Sheet Content Introduction 2 Main Benefits 2 Palight Product Range 2 Colours 3 Typical Applications 4 Standard Dimensions 8 Flammability 8 Product Masking 8 Typical Physical Properties
More informationLEXAN Resin LS2 Europe-Africa-Middle East: COMMERCIAL
LEXAN LS2 is a medium viscosity grade especially designed for applications with high optical requirements in terms of clarity and light transmission. MECHANICAL Taber Abrasion, CS-17, 1 kg 10 mg/1000cy
More informationLET FLY YOUR IDEAS EX-CEL PLASTICS LIMITED IS A SUSIDIARY OF
LET FLY YOUR IDEAS EX-CEL PLASTICS LIMITED IS A SUSIDIARY OF EX-CEL IMPRESS is the perfect choice product for High Quality Digital Printing Application. Available in a wide range of sheets sizes and thicknesses.
More informationNEXT GENERATION. AAA Plastics
NEXT GENERATION We produce the finest sheets in our world-class facilities, backed by 35 years of expertise. Superior quality State of the art Logistic advantage Satish C Gadoya Chairman Sabin Engineering
More informationPLAZCAST-LED CAST ACRYLIC (PMMA) SHEETS FOR LED LIGHTING SOLID SHEETS YOUR LOCAL STRATEGIC PARTNER
CAST ACRYLIC (PMMA) SHEETS FOR LED LIGHTING SOLID SHEETS YOUR LOCAL STRATEGIC PARTNER TECHNICAL PROPERTIES sheets feature the same advantageous qualities that standard Plazit-Polygal PLAZCAST sheets: Beautiful
More informationPanel elements. Closed Panels Transparent Panels Non-Transparent Panels Mesh Panels Accessories for Panel Elements
Panel elements Closed Panels Transparent Panels Non-Transparent Panels Mesh Panels Accessories for Panel Elements Panel elements Products in this section Acrylic Glass Polycarbonate PET-G Sheet Material
More informationTypical Property Values. Property Test Method Unit Value
Lexan* 9030 and Lexan* 9030 TG Sheet Product Datasheet Description Lexan* 9030 sheet is the standard Lexan sheet without UV nor Mar resistant surface treatment. Lexan 9030 sheet combines high impact and
More informationCycoloy* Resin C2950 Europe-Africa-Middle East: COMMERCIAL
Non-chlorinated and non-brominated flame retardant PC/ABS offering balanced flow and impact plus improved heat resistance intended for various applications. MECHANICAL Taber Abrasion, CS-17, 1 kg 54 mg/1000cy
More informationPrintaMent PLA DATASHEET. Technical Data. Description. Features. Colors. Additional Info. Dimensions. Physical Properties. Thermal Properties
PrintaMent PLA PrintaMent PLA is a tough, easy to use high grade type of filament ideal from low to high priced 3D printers. Our special modified formula, retains the typical features of PLA, but makes
More informationSABIC PC Resin PC0703R Asia Pacific: COMMERCIAL
PC0703R resin is a low flow (MFR = 7 at 300?C/1.2kg), heat and UV stabilized, polycarbonate product with mold release designed for use in the extrusion market. It is available exclusively at www.sabicpc.com
More informationNoryl* Resin GFN1630V Europe-Africa-Middle East: COMMERCIAL
Noryl* GFN1630V Polyphenylene Oxide (PPO) + Polystyrene (PS) resin is a 30 % Glass Reinforced, injection moldable grade with improved hydrolytic stability; this grade has been developed for fluid engineering
More informationÉ Plaques extrudées. Notre offre Extruded sheet - PMMA Catalogue. Altuglas International manufactures and markets PMMA acrylic sheet:
É Plaques extrudées Notre offre 2010 - PMMA 2012 Catalogue Altuglas International manufactures and markets PMMA acrylic sheet: Altuglas EX Altuglas EI with enhanced Impact Resistance. The Altuglas EX and
More informationTECHNICAL SHEET Setacryl and Polarlite Cast acrylic sheets
cast acrylic sheets TECHNICAL SHEET Setacryl and Polarlite Cast acrylic sheets Technical-commercial information Setacryl is the basic range of sheets cast in PolimetHYL Methacrylate with in a glossy surface
More informationILU series. Appearance. Application. Outline. Layout. LED Bulb(MR16,GU10,etc...) LED Down-light, Street Light, others...
Appearance Application Bulb(MR16,GU10,etc...) Down-light, Street Light, others... Recommended CL-L251 sesies CL-L233 sesies CL-L330 sesies CL-L340 sesies Outline Material : PMMA Unit : [mm] Layout φ1(cav.no.)
More informationLexan* Resin EXL9112 Americas: COMMERCIAL
Opaque PC-Siloxane copolymer with excellent processability. Improved flow, low temp. ductility. Non-chlorinated, non-brominated flame retardant product. UL rated V-0/5VA. MECHANICAL Tensile Stress, yld,
More informationLEXAN Resin 121R Asia Pacific: COMMERCIAL
Nonhalogenated. 17.5 MFR, for small, intricate parts. Internal mold release. MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 62 MPa ASTM D 638 Tensile Stress, brk, Type I, 50 mm/min 68 MPa ASTM D 638
More informationLexan* Resin DMX2415 Americas: COMMERCIAL
Lexan* DMX2415 is a polycarbonate resin with improved scratch resistance. Lexan* DMX2415 is available in transparent, translucent, and opaque colors. MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 810
More informationCycoloy* Resin C2800 Europe-Africa-Middle East: COMMERCIAL
Non-chlorinated and non-brominated flame retardant PC+ABS offering balanced flow and impact properties for various applications. MECHANICAL Taber Abrasion, CS-17, 1 kg 72 mg/1000cy SABIC Method Tensile
More informationValox* Resin 357X Europe-Africa-Middle East: COMMERCIAL
VALOX 357X is an impact modified, flame retarted PBT+PC blend. Applications like bobbins, switches and enclosures. MECHANICAL Taber Abrasion, CS-17, 1 kg 33 mg/1000cy SABIC Method Tensile Stress, yield,
More informationDuPont Delrin. Delrin 111P NC010. Product Information. acetal resin. plastics.dupont.com
DuPont Delrin acetal resin Delrin 111P NC010 Delrin 111P is a high viscosity acetal homopolymer with improved thermal stability and modifications for more precise moulding (reduced warpage, fewer voids).
More informationPSS-3000 Sheet. Technical Design Guide. Revision Written By Date of Release. 01 Chuck Clontz March 23, 2012
PSS-3000 Sheet Technical Design Guide Revision Written By Date of Release 01 Chuck Clontz March 23, 2012 CR-39 is a registered trademark of PPG Industries Ohio, Inc. Table of Contents Product Definition...
More informationLexan* Resin 500ECR Americas: COMMERCIAL
Lexan* 500ECR Polycarbonate (PC) resin is a 10% glass fiber filled, injection moldable grade. It is of non-chlorinated & non-brominated flame retardant systems with UL-94 V0 rating at 2.3mm. It is available
More informationCREATING SOLUTIONS PALIGHT. Foamed Flat PVC Sheet. Fabrication Construction Advertising
CREATING SOLUTIONS PALIGHT Foamed Flat PVC Sheet Fabrication Construction Advertising Introduction PALIGHT is a lightweight, flexible and durable foamed PVC sheet that is ideal for advertising and construction.
More informationLexan* Resin DMX9455A Europe-Africa-Middle East: COMMERCIAL
Lexan* DMX9455A is a standard flow, flame retardant, transparent polycarbonate copolymer resin with improved scratch resistance. MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 810 kgf/cm² ASTM D 638
More informationVALOX Resin 451E Europe-Africa-Middle East: COMMERCIAL
VALOX 451E is 20% glass reinforced, flame retardant PBT injection moulding resin. MECHANICAL Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 110 MPa ASTM
More informationNF-2000 NF-2000M08 NF-2000VUNS2 N-7S
POLYCARBONATE RESIN SHEET & FILM INDUSTRIAL APPLICATIONS GENERAL GRADE Polycarbonate Sheet NF-2000 NF-2000M08 NF-2000VUNS2 N-7S Polycarbonate Film FE-2000 FE-2000M01 FE-2000M12 FE-2000N-7 Polycarbonate
More informationMN-4800 Series are non-brominated non-phosphorus transparent flame retardant polycarbonate.
1. Introduction Panlite Series are non-brominated non-phosphorus transparent flame retardant polycarbonate. 2. Characteristics Good flame retardancy UL94 1.5mm V-0 equivalent. Environmental friendly Do
More informationTechnical data sheet CPE
Technical data sheet CPE Chemical Name Copolyester Description CPE is chemical resistant, strong, tough and demonstrate good dimensional stability. CPE is available in a wide range of colors to choose
More informationFDM Material Properties
ABS (Acrylonitrile / butadiene / styrene) Tensile Strength MPa D638 22 Tensile Modulus MPa D638 1627 Flexural Strength MPa D790 41 Flexural Modulus MPa D790 1834 Notched Izod Impact J/m D256 107 Unnotched
More informationValox* Resin 310SE0 Asia Pacific: COMMERCIAL
VALOX 310SE0 is an unreinforced, flame retardant PBT injection moulding resin. Applications: electrical industry, bobbins, keyboard, switches and switch components and appliance housings. MECHANICAL Tensile
More informationThe aluminium composite sheet for indoor and outdoor applications
printing durable cutting The aluminium composite sheet for indoor and outdoor applications A brand of the profine Group Even good things can still be improved on A traditional brand in the profine Group,
More informationTECHNICAL INFORMATION P8/0713 vitroflex NOISE BARRIER features
TECHNICAL INFORMATION P8/0713 vitroflex NOISE BARRIER features Methacrylate cast sheets special for acoustic insulations. Vitroflex NOISE BARRIER sheets placed in a sound barrier to protect a residential
More informationstyrenics Sinkral for extrusion
styrenics Sinkral for extrusion versalis Sinkral ABS production site and research facilities versalis, the chemical company of eni, is a leading European producer of styrenic polymers. Our Sinkral ABS
More informationTECHNICAL INFORMATION P10/0513 vitroflex LED BACKLIGHT features
TECHNICAL INFORMATION P10/0513 vitroflex LED BACKLIGHT features Vitroflex LED BACKLIGHT is the special methacrylate casting or extrusion sheet designed to use in BACKLIGHT system, which allows the substitution
More informationCYCOLOY Resin XCY620 Europe-Africa-Middle East: COMMERCIAL
PC+ ABS Automotive applications, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat Aging MECHANICAL Tensile Stress, yld, Type I, 50 mm/min
More informationPolycarbonate solid sheets with U.V. protection on both sides
4.1 SOLID SHEETS Polycarbonate solid sheets with U.V. protection on both sides DESCRIPTION The development of extrusion technology have allowed the construction of a plant unique in Europe for the production
More informationNoryl* Resin SE1GFN1 Europe-Africa-Middle East: COMMERCIAL
Noryl* SE1GFN1 is a 10% glass reinforced, injection moldable modified polyphenylene ether resin. Designed for improved dimensional stability and good flow, this resin also uses non-chlorinated, non-brominated
More informationPALIGHT. Flat Foamed PVC Sheet. CREATING SOLUTIONS
PALIGHT Flat Foamed PVC Sheet CREATING SOLUTIONS www.palram.com PALIGHT Introduction PALIGHT is a lightweight, flexible and durable foamed PVC sheet that is ideal for advertising and construction. It brings
More informationRPU 60. RPU 60 is a tough, abrasion-resistant material that is a good choice for parts that require rigidity, strength, and durability.
RPU 60 VERSION 1 TECHNICAL DATA SHEET 8/1/16 V3.3 RPU 60 RPU 60 is a tough, abrasion-resistant material that is a good choice for parts that require rigidity, strength, and durability. NOTES Test specimens
More informationOUR RANGE OF PRODUCTS
P R O P E R T I E S O F O U R P L A S T I C S OUR RANGE OF PRODUCTS Sheets planed, 1000, 1000 U, 500 can be supplied in standard colours. All other types available on demand. Thickness tolerance: +0/+0.4
More informationTECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability
TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The
More informationMay 15 PERSPEX. For glazing. Perspex Data Sheet. Allplastics PTY LTD Unit 20, 380 Eastern Valley Way Chatswood NSW 2067
May 15 PERSPEX 2012 Perspex Data Sheet For glazing APPENDIX 1- PORPERTIES Table 1 Compares the typical physical and mechanical properties of cast and extruded sheet. PERSPEX acrylic sheet Properties Method
More informationDuPont Hytrel. Hytrel Product Information. thermoplastic polyester elastomer. plastics.dupont.com
DuPont Hytrel thermoplastic polyester elastomer is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing
More informationNoryl* Resin V0150B Europe-Africa-Middle East: COMMERCIAL
Noryl* V0150B is an unfilled, injection moldable modified polyphenylene ether resin.. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 1.5 mm and
More informationERTALON Extruded Products
ERTALON Extruded Products Polyamides (PA) Main Characteristics: High mechanical strength, stiffness, hardness and toughness Excellent resilience High mechanical damping ability Good sliding properties
More informationDesign Example with TPP7130 in A60 LED bulb heat sink
Design Example with TPP7130 in A60 LED bulb heat sink Abstract: This article introduces the design example with TPP7130, an insulated thermally conductive plastic with thermal conductivity of 15w/m*K,
More informationSeries 631 2C-Screen Printing Ink for Flat Glass
Series 631 2C-Screen Printing Ink for Flat Glass Highly opaque 2-component screen printing ink Series 631 based on highly resistant raw materials for printing of flat glass for indoor use. Series 631 does
More informationMay 2012 COMPREHENSIVE RANGE OF FOAM PVC SHEET
May 2012 the COMPREHENSIVE RANGE OF FOAM PVC SHEET foamalux FOAM PVC SHEET FOAMALUX ULTRA GLOSS FOAM PVC SHEET FOAMALUX XTRA COMPOSITE FOAM PVC SHEET 0 1 Presenting the ultimate of foam PVC sheet The Foamalux
More informationWherever Your Imagination Takes You NO.1 WORLDWIDE IN RIGID PVC FOAM SHEETS
Wherever Your Imagination Takes You NO.1 WORLDWIDE IN RIGID PVC FOAM SHEETS Working with Kömacel Machining Kömacel sheets can be easily and quickly worked with standard tools to process wood and metal
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationBAYBLEND T45, T65, and T85
BAYBLEND T45, T65, and T85 Polycarbonate/ABS Blends General-Purpose Grades Product Information Description Bayblend T45, T65, and T85 resins are thermoplastic blends of Makrolon polycarbonate and Lustran
More informationHeat-Shrinkable Tubing
CPO 2:1 Shrink Ratio Thin-Wall Tubing, Non-Lined Flame-retardant, cross-linked polyolefin Continuous operating temperature: -55 C to 135 C Shrink temperature of 120 C Meets UL and CSA standards; MIL-DTL-23053/5
More informationStereolithography Material Properties
Stereolithography Material Properties Details Stereolithography Standard lead time: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: From 2 working days, depending on the
More informationGRP Panels. PANOLIT - CPR Plywood core coated on both sides with glassfibre reinforced polyester resin. Thicknesses and Weights
PANOLIT - CPR Plywood core coated on both sides with glassfibre reinforced polyester resin. Thickness in mm 6 11 14 17 20 24 27 30 Weight kg/m 2 CPR 5.5 9.0 9.4 11.2 12.7 16.2 18.5 20.5 Weight kg/m 2 CPRFR
More informationABS-M30 PRODUCTION-GRADE THERMOPLASTIC FOR FDM 3D PRINTERS
ABS-M30 PRODUCTION-GRADE THERMOPLASTIC FOR FDM 3D PRINTERS ABS-M30 is up to 25 to 70 percent stronger than standard ABS and is an ideal material for conceptual modeling, functional prototyping, manufacturing
More informationUltradur (PBT) Product Range. Ultradur in the web:
Ultradur (PBT) Product Range Ultradur in the web: www.ultradur.de Ultradur (PBT ) Ultradur is BASF s trade name for its line of partially crystalline saturated polyesters. This line is based on polybutylene
More informationABS-LIKE VACUUM CASTING URETHANE FOR TECHNICAL PARTS AND PROTOTYPES BASIC PHYSICAL PROPERTIES. Appearance. Color of Finished Article
ABSLIKE BASIC PHYSICAL PROPERTIES Item Data Remarks Appearance A Comp. B Comp. Beige, black, not colored Clear pale yellow Polyols Isocyanates Color of Ivory Adjustable to be white or black Viscosity mpa
More informationDuPont Rynite 545 NC010 (Preliminary Data)
PRODUCT INFORMATION DuPont Rynite 545 NC010 (Preliminary Data) Product Information Common features of Rynite thermoplastic polyester include mechanical and physical properties such as excellent balance
More informationAKROMID RM The Polyamide with Reduced Moisture Absorption
AKROMID RM The Polyamide with Reduced Moisture Absorption AKRO-PLASTIC GmbH Member of the Feddersen Group Polyamides are materials which have an extremely balanced profile of properties and can therefore
More informationKÖMACEL THE INTEGRAL FOAM SHEET FOR UNIVERSAL APPLICATION!
painting. laminating. cladding. KömaCel - integral foam sheet with the very best values - both inner and outer Processing information for: window manufacturers. plumbers. manufacturers of roller shutters.
More informationContinental Solution
Continental Solution INTEGRATED SOLUTIONS FOR PROCUREMENT EXCELLENCE Aluminum Composite Panel August 2013 Product Details & Distribution About us About us Continental Solution Int l Ltd is a company based
More informationImageBond. Aluminium Composite Material
ImageBond Aluminium Composite Material ImageBond Suitable for UV digital printing Lightweight Smooth flawless surface 3D, 2D and flat applications is a new brand of specifically engineered Aluminium Composite
More informationVANDAR 2100 PBT Unfilled
Description Vandar 2100 is a polyester alloy designed to offer maximum impact strength at room and low temperatures. This unfilled compound is characterized by outstanding chemical resistance, dimensional
More informationModel EN Optical Encoder Series Material Change
June, 006 SENSORS & CONTROLS PRODUCTS Bourns Manufacturers Representatives Corporate Distributor Product Managers Americas Sales Team Asia Sales Team Europe Sales Team Model EN Optical Encoder Series Material
More informationAcetal Copolymer(POM)
POLISEN A Acetal Copolymer (POM) da Product Information POLISEN is a trademark POLISEN A Acetal Copolymer (POM) Description Acetal Copolymer (POM) is thermoplastic polymer, made by the polymerization of
More informationPE300 Rod Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
More informationReady to serve the biobased economy
Ready to serve the biobased economy Martin H.B. Snijder 5 th International Congress on Bio-based Plastics and Composites March 14 th 15 st 2012, Maternushaus, Köln What is GreenGran? Production and sales
More informationSheet & Profile Extrusion Global
Sheet & Profile Extrusion Global Trinseo Resins for a Real Advantage Trinseo Resins for Sheet & Profile Extrusion With over 50 years of experience in the extrusion market, Trinseo offers a variety of premium
More informationRAPID PROTOTYPING RESINS INNOVATION AND QUALITY IN VACUUM CASTING
RAPID PROTOTYPING RESINS INNOVATION AND QUALITY IN VACUUM CASTING PR7 SERIES Reference PR740 PR777 PR 700 PR752 Hardness 70 Shore D 75 Shore D 87 Shore D 87 Shore D Countertype of 1 HDPE/PP rigid HDPE/PP
More informationTECHNICAL DATA SHEET GRILON AG-30 H
TECHNICAL DATA SHEET GRILON AG-30 H BLACK 9836 Product description Grilon AG-30 H black 9836 is a normal viscosity, specially heat stabilised PA 66 injection moulding grade with 30% glass fibres. Grilon
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationPBT(Polybutylene terephthalate)
.1.1.WEDX-1 Grade Series PBT(Polybutylene terephthalate) 1 11 1 1 (Glass Fiber -Reinforced, UL94 V- Grades) CONTENTS Introduction 1. General physical properties of DURANEX -1 series. Processing characteristics
More informationTECHNYL C 50H2 NATURAL
TECHNYL C 50H2 NATURAL Description TECHNYL C 50H2 Natural is a unreinforced melamine cyanurate flame retarded polyamide 6. This product is heat stabilised and can be used for injection moulding and extrusion
More informationTECHNICAL DATA SHEET GRILAMID L 20 LF GREY
TECHNICAL DATA SHEET GRILAMID L 20 LF GREY General product description Grilamid L 20 LF grey is a medium viscosity graphite filled Polyamide 12 (PA12) grade suitable for both injection moulding and extrusion
More informationXenoy* Resin 5720U Americas: COMMERCIAL
Unfilled PBT+PC alloy. Outstanding low temperature impact/chemical resistance. UV stabilized version of XENOY MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 470 kgf/cm² ASTM D 638 Tensile Stress, brk,
More informationengineering plastics Intelligent Solutions for Extrusion
engineering plastics Intelligent Solutions for Extrusion High Performance Extrusion Solutions from eurotec High Performance Extrusion Solutions from eurotec eurotec is an independent compounder of engineering
More informationTECHNICAL DATA SHEET GRILON TS V0
TECHNICAL DATA SHEET GRILON TS V0 General product description Grilon TS V0 is an unreinforced, normal viscosity, self-extinguishing PA66 + PA6 injection moulding grade. Grilon TS V0 has the following important
More informationSales Range Molding Compounds PLEXIGLAS PLEXALLOY PLEXIFIX CYROLITE
Sales Range Molding Compounds PLEXALLOY PLEXIFIX CYROLITE October 2004 Table of Contents General Remarks 3 Product Overview 4 Standard Molding Compounds 4 zk Molding Compounds 6 (Impact-Modified) hw Molding
More informationTechnical Product Information
Technical Product Information AKRYLON XT 1. PRODUCT IDENTIFICATION... 2 1.1 Characteristics... 2 1.2 Applications... 2 1.3 Fabrication and finishing techniques... 2 2. TECHNICAL INFORMATION... 3 2.1 Colours
More informationABS-LIKE VACUUM CASTING URETHANE FOR TECHNICAL PARTS AND PROTOTYPES BASIC PHYSICAL PROPERTIES. Appearance. Color of Finished Article
ABSLIKE BASIC PHYSICAL PROPERTIES Item Data Remarks Appearance A Comp. B Comp. Beige, black, not colored Clear pale yellow Polyols Isocyanates Color of Finished Article Ivory Adjustable to be white or
More informationAutomotive Application AUTOMOTIVE APPLICATION
Thermoplastic s compounds are widely used in the automotive industry. The producer has developed polyamide and polypropylene special grades for automotive application with improved mechanical parameters
More informationTECHNICAL DATA SHEET GRILON AG-35
TECHNICAL DATA SHEET GRILON AG-35 Grilon AG-35 is a heat stabilised, normal viscosity PA 66 injection moulding grade with 35% glass fibres. High stiffness High tensile strength High heat distortion temperature
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 05-002 POM copolymer Very easy flowing Injection molding type with high rigidity and hardness; good
More informationPLEXIGLAS SOUNDSTOP XT BIRD GUARD
PLEXIGLAS SOUNDSTOP XT BIRD GUARD PLEXIGLAS SOUNDSTOP XT BIRD GUARD Large-size, highly transparent extruded noise barrier sheets with integrated bird protection. Transparent acoustic screens as well as
More informationSemi-finished components made of industrial plastics
Semi-finished components made of industrial plastics Greetings we are OKULEN. OKULEN. Employing 150 people in our fully equipped machine shop where we produce top quality products. Comprehensive. We develop
More informationPE300 Profiles Extruded
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
More informationStereolithography Material Properties
Stereolithography Material Properties Details Standard Stereolithography Standard lead time: From 2 days, depending on the size of the parts and the number of components. Standard accuracy: Standard stereolithography
More informationUltrason E, S, P (PESU, PSU, PPSU) Product Range
Ultrason E, S, P (PESU, PSU, PPSU) Product Range Ultrason (PESU / PSU / PPSU ) Ultrason E Polyethersulfone ( PESU ) Ultrason S Polysulfone ( PSU ) Ultrason P Polyphenylsulfone ( PPSU ) Ultrason products
More informationFlame-retardant, cross-linked polyolefin. Shrink temperature of 120 C. Cat. No.*
2:1 Shrink Ratio CPO Series Thin-Wall Tubing, Non-Lined CATALOGUE NUMBER CONSTRUCTION Final Series Colour ft Order No. CPO63 + 0 + C = CPO63-0-C Available Colours 0 Black 5 Green C Clear 6 Blue 2 Red 9
More informationStyrolux Styrene-Butadiene Copolymer (SBC) Mechanical and Optical Properties
Styrolux Styrene-Butadiene Copolymer (SBC) Mechanical and Optical Properties Toughness, stiffness and clarity are key attributes of Styrolux Styrene-Butadiene Copolymer (SBC). Another significant property
More informationSeries 751 2C Pad Printing Ink for Glass, Metals and Duroplasts
Series 751 2C Pad Printing Ink for Glass, Metals and Duroplasts Glossy and highly resistant pad printing ink Series 751 for printing on glass, various metals and duroplasts. Series 751 does neither contain
More informationCYCOLOY Resin CX7240 Americas: COMMERCIAL
CYCOLOY CX7240 resin is an injection moldable PC/ABS blend. It contains non-brominated and non-chlorinated flame retardant systems to meet UL-94 V0 at 0.75mm, V1 at 0.6mm, V2 at 0.2mm and 5VB at 1.5mm
More informationCELANEX 1600A PBT Unfilled
Description Celanex 1600A is a high molecular weight grade of unreinforced polybutylene terephthalate used in both extrusion and injection molding applications. Physical properties Value Unit Test Standard
More informationProperty Test Condition Unit Standard typical Value -
Makrolon 8325 Glass fiber (Normal fiber) reinforced grades / 20 % Glass fibermvr (300 C/1.2 kg) 4.0 cm³/10 min; 20 % glass fiber reinforced; high viscosity; easy release; injection reinforced molding -
More informationPE300 Sheet Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
More informationCELANEX PBT Unfilled
Description Celanex 2000-2 is a general purpose, unreinforced polybutylene terephalate with a good balance of mechanical properties and processability. Celanex 2000-2 is a high flow material that contains
More information