Ultrasonic Thickness Gauge
|
|
|
- Arron Garrett
- 6 years ago
- Views:
Transcription
1 Ultrasonic Thickness Gauge Model:TM8810 Measuring range (metric/imperial): mm,0.06-8inch Operating principle: ULTRASONIC Materials measured: only 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer Calibration block: included Resolution: 0.1mm Accuracy: ±(0.5%n+0.1) Power supply: 4x1.5vaa(UM-3) battery Operating conditions: ( ), 90%RH Dimensions:160x68x32mm Weight:208g(not including battery) Model:TM8811 Measuring range (metric/imperial): mm,0.06-8inch Operating principle: ULTRASONIC Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials Sound velocity: m/s Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer Calibration block: included Resolution: 0.1mm Accuracy: ±(0.5%n+0.1) Power supply: 4x1.5V AA(UM-3)battery Weight: 208g (not including battery)
2 Ultrasonic Thickness Gauge Model:TM8812 Measuring range (metric/imperial): mm,0.05-9inch Operating principle: ULTRASONIC Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials Sound velocity: m/s Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer Calibration block: included Resolution: 0.1mm Accuracy: ±(0.5%n+0.1) RS232C interface: with RS232C Power supply: 4x1.5V AAA (UM-4)battery Dimensions: 120x62x30mm Weight: 164g (not including battery) Application: Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. In industries of petroleum, shipbuilding, power station and machine manufacturing. Specifications Model TM-8812 TM-8811 TM-8810 Measuring range Metric Imperial 1.0~225 mm 0.05~9 inch 1.2~200 mm 0.06~8 inch 1.2~200 mm 0.06~8 inch Operating principle ULTRASONIC Materials measured Any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC,gray cast iron, nodular cast iron and other materials. Only 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron Sound velocity 500~9000 m/s --
3 Lower limit steel pipes Calibration block Resolution Accuracy Ф15 x2.0mm, Ф20 x3.0mm determined by the transducer Included 0.1 mm ±(0.5%n+0.1) RS232C interface With RS232C Power supply 4 x1.5v AAA(UM-4) 4 x1.5 AA (UM-3) Battery 4 Battery indicator Operating conditions Low battery indicator 0~40 / 10~90% RH Dimension 120 x 62 x 30 mm 160 x 68 x 32 mm Weight (not including battery) 164g 208g Standard delivery Main unit M Ф10 transducer Couplant Instruction manual Carrying case B04 B01 B01 Optional Accessories 6M Ф 6mm thin Material probe 5M Ф 12mm high Temperature probe Cable & Software for RS232C interface Measuring range (steel) :1.0~50.0mm Operating temperature : -10~+60 Measuring range (steel):1.0~ 225.0mm (normal temperature) Measuring range (steel):4.0~100.0mm (high temperature) Available only for TM-8812
4 Coating Thickness Meter Model: CM8825F, CM8825N, CM8825FN In built probe(s) Measuring range:0-1250um/0-50mil Power supply: 4x1.5V AAA(UM-4)battery Dimensions: 126x65x27mm Weight: 81g(not including battery RS-232C cable & software: 1.USB adaptor for RS-232C 2.Bluetooth interface Model: CM8826F, CM8826N, CM8826FN With separate probe(s) Measuring range:0-1250um/0-50mil Power supply: 4x1.5V AAA(UM-4)battery Dimensions: 126x65x27mm Weight: 81g(not including battery)
5 Coating Thickness Meter Operating principle Operating principle Application (F type) Can measure the thickness of Magnetic Non-magnetic coating layers induction On magnetic substrate (NF type) Can measure the thickness of nonconductive Eddy current coating layers covered on nonferrous substrate For example Such as: (aluminum, chrome, copper, enamel, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel ) Such as : ( enamel, rubber, paint, vanish, plastic anodic-oxide layer) covered on nonferrous substrate (aluminum, brass, zinc, tin and nonmagnetic stainless steel) Specifications Model CM-8825 in built probe(s) CM-8826 with separate probe(s) CM-8828 Operating Principle F type NF type CM-8825FN CM-8826FN (F&NF) CM-8825N CM-8826N (only NF) CM-8825F CM-8826F (only F) (F & NF) Measuring range 0~1250um/0~50mil(default range) Resolution 0.1/1 Accuracy Min. radius work piece Min. measuring area Min. sample thickness Metric / lmperial Power supply Battery indicator ±1-3%n or ±2.5um F: Convex 1.5mm/ Concave 25mm N: Convex 3mm/ Concave 50mm 6mm 0.3mm Convertible 4 x1.5v AAA(UM-4) battery Low battery indicator Auto switch off Dimension Weight (Not including battery ) 126 x 65 x 27 mm 81g Main unit 1 F type probe N type probe Standard F calibration base set delivery N calibration base set Calibration foil set 1 set (4 Foils) -- Carrying case B04 Instruction manual 1 Optional Accessories Cable & software for RS-232C
6 Coating Thickness Meter Model: CM8829F,CM8829N, CM8829FN In built probe(s) Measuring range:0-1250um/0-50mil Power supply: 4x1.5V AAA(UM-4)battery Dimensions: 126x65x27mm Weight: 81g(not including battery) Optional accessories: other range 0-200um to 15000um RS-232C cable & software: 1.USB adaptor for RS-232C 2.Bluetooth interface Specifications Model CM-8829 (please specify probe type, in built or separate while ordering) Operating F type CM-8829FN CM-8829N CM-8829F Principle N type (F & NF) ( only NF ) ( only F ) Measuring range 0~1250um/0~50mil(default range) Resolution 0.1/1 Accuracy Min. radius work piece Min. measuring area Min. sample thickness Metric / lmperial Power supply Battery indicator ±1~3%n or ±2.5um F: Convex 1.5mm/ Concave 25mm N: Convex 3mm/ Concave 50mm 5mm 0.3mm Convertible 4 x1.5v AAA(UM-4) Low battery indicator Auto switch off Dimension Weight (Not including battery ) 124 x 62 x30 mm 115g (CM-8829), 200g (CM-8829S) Standard delivery Main unit 1 F type probe 1 1 N type probe 1 1 F calibration base set 1 1
7 N calibration base set 1 1 Calibration foil set 4 Carrying case B04 Instruction manual 1 Optional Accessories Cable & software for RS-232C, other ranges Model: CM8821 Operating principle: magnetic induction (F) Model: CM8821 Measuring range:0-1000um Operating principle: magnetic induction (F) Measuring range:0-1000um Power supply: 4x1.5V AA (UM-3) battery Power supply: 4x1.5V AA ( UM-3) battery Weight: 250g(not including battery) Weight: 250g(not including battery) Model: CM8822 Measuring range:0-1000um Power supply: 4x1.5V AA(UM-3)battery Weight: 250g(not including battery)
8 Coating Thickness Meter Model: CM8823 Operating principle: eddy current (NF) Measuring range:0-1000um Power supply: 4x1.5V AA (UM-3)battery Weight: 250g(not including battery) Optional accessories: other range 0-200um to 5000um Specifications Model CM-8822 CM-8821 CM-8822F CM-8823 CM-8822N Operating principle F & NF Only F Only NF Measuring range 0~1000um/0~40mil(default range) Resolution 0.1/1 Accuracy Min. radius work piece Min. measuring area Min. sample thickness Metric / lmperial Power supply Battery indicator Auto switch off Operating conditions Dimension ±1~3%n or ±2.5um F: Convex 1.5mm/ Concave 25mm N: Convex 3mm/ Concave 50mm 6 mm 0.3mm Convertible 4 x1.5v AA (UM-3) Battery Low battery indicator 0~40,10~90%RH 160x 68 x32 mm Weight (Not including battery ) 250g 210g Standard delivery Main unit (1000 um) 1 F type probe 1 1 N type probe 1 1 F calibration base set 1 1 N calibration base set 1 1
9 Calibration foil set 1 set ( 4 Foils) 1 Foil Carrying case B01 Instruction manual 1 Optional Accessories Other range : 0~200um to um Model: CM8828FN In built probe(s) Measuring range:0-1250um/0-50mil Power supply: 4x1.5V AAA(UM-4)battery Dimensions: 126x65x27mm Weight: 81g(not including battery) RS-232C cable & software: 1.USB adaptor for RS-232C 2.Bluetooth interface Thank you for your attention Dalian Taijia Technology Co.,Ltd NO.2 (Gan) Huabei Road, Dalian, , P.R.China Phone: Fax: martin@tmeasurement.com MSN:tmeasurement02@hotmail.com Skype:tmeasurement02
Coating Thickness Gauge TG-100 series Applications: F Type Magnetic induction: Can measure the thickness of non-magnetic coating layers on magnetic substrate Such as: (aluminum, chrome, copper, enamel,
PORTABLE COATING THICKNESS GAUGE
Coating Thickness Gauge IPX-201F Handheld coating thickness gauge with F-probe for steel substrates. Clear 4 digit segment LCD display Magnetic induction measuring principle Non-magnetic coating on ferrous
Model Instruction Manual
Model CM-8822 Coating Thickness Gauge Instruction Manual reedinstruments www com Table of Contents Features... 3 Specifications... 3 Instrument Description... 4 Operating Instructions...5-6 Measuring Procedure...
COATING THICKNESS MEASURING
LIST- MAGNETIK COATING THICKNESS MEASURING www.list-magnetik.de COATING THICKNESS MEASURING on metallic substrate magnetic induction measuring method Paint Zinc coating eddy current measuring method d2
Coating Thickness Meter Data Sheet / Instructions
Paint Test Equipment Coating Thickness Meter Data Sheet / Instructions Coating Thickness Meter Information The Paint Test Equipment Coating Thickness Meter easily measures all coatings on metallic substrates
Advancing with Technology
Advancing with Technology Coating thickness measurement MiniTest 4100 3100 2100 1100 Measurement of non-magnetic coatings (e. g. paint, zinc) on steel insulating coatings (e.g. paint, anodising coatings)
Understanding Coating Thickness Measurement Helmut Fischer
Understanding Coating Thickness Measurement Helmut Fischer Many of the materials used in today s products have some sort of coating, whether it s the shiny new paint job on your Lexus, the anodized protection
Combined Hardness Tester NOVOTEST T-UD2
Combined Hardness Tester NOVOTEST T-UD2... High-precision, easy in operation and reliable with the most affordable price in the world among the analogues! Two probes: UCI and Leeb Any restrictions for
Combined Hardness Tester NOVOTEST T-UD3 NEW
Combined Hardness Tester NOVOTEST T-UD3 NEW Unique, multi-functional, convenient, and reliable tester at affordable price! 88 combinations of materials and hardness scales and calibrations Integrated camera
PORTABLE HARDNESS TESTING
Portable Hardness Tester IPX-300 Handheld dynamic metal hardness tester with hardness conversion and automatic position setting. Dynamic hardness testing: quick and reliable Impact device D integrated:
Coating Thickness Gauge TT260. Instruction Manual. TIME Group Inc. Beijing TIME High Technology Ltd.
Coating Thickness Gauge TT260 Instruction Manual TIME Group Inc. Beijing TIME High Technology Ltd. Content 1 INTRODUCTION...3 1.1 MEASURING PRINCIPLES...3 1.2 STANDARD CONFIGURATION AND OPTIONAL PARTS...4
CALIBRATION TABLE OF CONTENTS. 9.1 Calibration
9.1 Calibration CALIBRATION Calibration and certification of AUDIT 106 Ultrasonic Thickness gauge instrument can be carried out with full trace ability to national standards if required. Baugh & Weedon
Product Index. Coating Thickness. Porosity. Adhesion. Inspection Kit. Surface Profile. Surface Cleanliness. Gloss
Paint Test Equipment Price List 2018 Coating Thickness Wet Film Thickness Porosity Adhesion Surface Roughness Surface Cleanliness Climatic Conditions www.paint-test-equipment.com Product Index Coating
Material and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
Hardness Testers Surface Testers
Hardness Testers Surface Testers 49 3814 Analogue Bench Hardness Tester The 3814 Hardness Tester provides reliable Rockwell Hardness values on all types of metal and alloys, hard or soft, and in many shapes.
Float Flow Meters series NF
Float Flow Meters series NF - Quality design - High corrosion resistance - Reliable measurement principle - Low weight and small dimensions Doc. no.: 22, en_cat_nf, 8/2015 Usage Flowmeters type NF are
UCI Hardness Tester NOVOTEST T-U3
UCI Hardness Tester NOVOTEST T-U3 Unique and unmatched Portable Hardness Tester! High-precision, multi-functional, convenient, reliable and affordable. 88 combinations of materials and hardness scales
Metropolitan Water Reclamation District of Greater Chicago 10/19/ Mark Joyce Senior Mechanical Engineer Engineering Department
Metropolitan Water Reclamation District of Greater Chicago 10/19/201 2 Mark Joyce Senior Mechanical Engineer Engineering Department 1 Definition of Corrosion Corrosion is the deterioration of a substance
UCI Hardness Tester NOVOTEST T-U3 NEW
UCI Hardness Tester NOVOTEST T-U3 NEW.. Unique and unmatched Portable Hardness Tester! High-precision, multi-functional, convenient, reliable and at affordable price! 88 combinations of materials and hardness
Portable Hardness Tester NOVOTEST T-D1
NOVOTEST of Ukraine, founded in 2009, is a leading manufacturer in Ukraine of high quality portable instruments for non-destructive testing of materials such as concrete, metal or polymeric materials.
EPX300 Portable Hardness Tester
EPX300 Portable Hardness Tester CONTENTS 1 Introduction 1.1 Principle 1.2 Structure 1.3 Specifications 2 Test 2.1 Preparation 2.2 Test Procedure 2.3 Browse 2.4 Printing 3 Setup 3.1 Material 3.2 Direction
Electromagnetic thickness measurement of coatings. Situation and prospects.
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic More Info at Open Access Database www.ndt.net/?id=16306 Electromagnetic thickness measurement
Overview of Coatings and Surface Treatments
Overview of Coatings and Surface Treatments Looking around, it is apparent that there are coatings on many everyday objects. The desk you are sitting at is coated with a sealer, the walls of your office
Hardness Tester TH160
Hardness Tester TH160 Developed model of TH140 On-Board memory holds 240-1000 groups of data Automatic identification Impact Devices and test direction (Except G) Time and date setting; auto-clock Integral
LIST-MAGNETIK Leinfelden-Echterdingen, Germany
Leinfelden-Echterdingen, Germany Perfect in function and technology. 2 / 26 Presentation of company and products Dated: October 2015 Our offer About us... 3 Coating Thickness Meter TOP-CHECK... 4 Coating
Designed For The Future, Backed By Years Of Experience SInce 1908.
8 G N I Sin SPINNNNING L SPI A TAL E MET E ME M C A M AC 0 9 1 ce Small Metal Spinnings Designed For The Future, Backed By Years Of Experience SInce 1908. Acme s metal spinning technology is targeted to
SURFACE TEMPERATURE SENSORS
SURFACE TEMPERATURE SENSORS These sensors are thermocouples and resistance thermometers for surface temperature measurement of objects. C400 R400 Magnet sensors measurement and monitoring of objects such
Fast Corrosion Screening Technique Saturation Low Frequency Eddy Current
Summary The inspection of ferromagnetic and non-ferromagnetic material components is an attractive and efficient method due to its fast screening of large areas with low surface preparations. Already qualified
No # Specifications Rate To Be Quoted. Unit Qty (in figures) (in words) Total Amount
Revised Schedule B as per corrigendum no. SASB/NIT/Works/818/2016/09 dated 28.01.2016. SCHEDULE B (FINANCIAL BID) B- a FABRICATION AND SUPPLY OF 200 EUROPEAN TYPE TOILETS (Rate to be quoted in Rupees both
Brinell Rockwell Vickers. Hardness Tester (Manual)
Brinell Rockwell Vickers Hardness Tester (Manual) Brinell Rockwell Vickers Hardness Tester (Electric) Brinell Hardness Tester (Electronic) Brinell Rockwell Vickers Hardness Tester MANUAL BRV-9000M Test
WHAT TO DO? ELECTROPLATING OR METAL SPRAYING?
WHAT TO DO? ELECTROPLATING OR METAL SPRAYING? S. de Vries, J.W. Rauhorst, B. Plasse & F. Kemeling The first step to improve and control the quality of a metal product starts at the desk of the designer.
QUALITY OPERATIONS STANDARD
QUALITY OPERATIONS STANDARD TITLE: SELLER REQUIREMENTS FOR TEMPER INSPECTION BY ELECTRICAL MEASUREMENT AND/OR HARDNESS MEASUREMENT Standard Number: QOS - 0021 Revision Letter: E Effective Date: 07/31/12
Hardness tester MH180
tester MH180 Compact plastic case,suitable for use under poor working conditions. at any angle, even upside down. Wide measuring range. It can measure the hardness of all metallic materials. Direct display
ASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
1 B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum 2 B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated
PORTABLE ULTRASONIC HARDNESS TESTER
PORTABLE ULTRASONIC HARDNESS TESTER MET-U1A MET-U1A ULTRASONIC HARDNESS TESTER, 15N TESTFORCE FEATURES The INNOVATEST MET-U1A differs completely from traditional hardness testers. Instead of measuring
2017 Award Nomination Title of Innovation: Nondestructively Measure TSA on Stainless Steel
2017 Award Nomination Title of Innovation: Nondestructively Measure TSA on Stainless Steel Nominee(s) Fischer Technology, Inc. Category: (select one below) Coatings and Linings Cathodic Protection Materials
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION Exova Canada Inc.
INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM
Electrochemical Considerations
17-1 CHAPTER 17 CORROSION AND DEGRADATION OF MATERIALS PROBLEM SOLUTIONS Electrochemical Considerations 17.1 (a) Oxidation is the process by which an atom gives up an electron (or electrons) to become
Electroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
SECTION FLAGPOLES. 1.1 SUMMARY A. Section Includes: 1. Fixed high dimensional, ground set, uniform conical taper, seamless tube flag pole.
SECTION 10 75 00 FLAGPOLES SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fixed high dimensional,
S E N S O R D A T A S H E E T. Extreme Environment. For high pressure, low temperature, and high temperature applications
For high pressure, low temperature, and high temperature applications F E A T U R E S > For applications requiring high accuracy, high reliability, and structural integrity. > Operating temperatures from
DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ELECTRICAL CONDUCTIVITY TEST FOR VERIFICATION OF HEAT TREATMENT OF ALUMINUM ALLOYS EDDY CURRENT METHOD
INCH-POUND 25 June 2002 SUPERSEDING MIL-STD-1537B 19 July 1988 DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ELECTRICAL CONDUCTIVITY TEST FOR VERIFICATION OF HEAT TREATMENT OF ALUMINUM ALLOYS EDDY CURRENT
2016 New Revision HIGH PERFORMANCE TAPS
2016 New Revision HIGH PERFORMANCE TAPS Greenfield Industries is excited to announce the addition of high performance taps to the Cleveland brand. All taps in the Cleveland line are designed to machine
Smart Portable Wireless Leeb Hardness Solution
Solutions since 1954 Smart Portable Wireless Leeb Hardness Solution From the inventor of Leeb Interactive Equotip Leeb D Complete Portfolio Equotip Live Wireless Real-time Data Sharing Cloud Backup Equotip
Prevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
Builders Hardware Manufacturers Association (BHMA)
Builders Hardware Manufacturers ssociation (BHM) Code Finish Description Base Nearest Category Material US Equiv. 600 Primed for painting USP 601 Bright Japanned US1B 602 Cadmium plated US2C 603 Zinc plated
Pulsed Eddy Current Testing (PECT) Inspection Technique
Introduction Pulsed Eddy Current Testing (PECT) is an inspection technique used for corrosion under insulation (CUI) screening on carbon steel structures as pipes, vessels, tanks and spherical tank legs
Cast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
Boeing Specifications
Page 1 of 6 = updated = Performed by GKN BAC 5000 AH General Sealing PSD 6-211, 6-220, 6-222, 6-224, 6-225, 6-227, 6-228 BAC 5004 L Installation of Permanent Fasteners PSD 6-121, 6-122, 6-125 BAC 5004-1
PULSED EDDY CURRENT (PEC) Lyft - Pulsed eddy current reinvented
PULSED EDDY CURRENT (PEC) Lyft - Pulsed eddy current reinvented 1 PRESENTATION CONTENT Applications and basics of the technology Compensated wall thickness feature (CWT), Dynamic mode feature, SmartPulse
SURFACE VEHICLE INFORMATION REPORT
400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE INFORMATION REPORT Submitted for recognition as an American National Standard J474 Issued 1930-01 Reaffirmed 1985-02 Superseding J474 JUN72
Technical Guide. Adhesive Tapes
Technical Guide Adhesive Tapes TECHNICAL GUIDE ADHESIVE TAPES Thank you for choosing our products Note: Technical information contained in this catalog may be changed or updated by the manufacturer without
DEFENSE & CIVILIAN SPECIFICATIONS
DEFENSE & CIVILIAN SPECIFICATIONS* The following listing has been compiled from the latest available edition of the Department of Defense Index of Specifications and Standards (DODISS), which includes
3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products Selection Guide Revision E 3 Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant
3 Scotch-Weld TM Flexible Epoxy Adhesive LSB90
3 Flexible Preliminary Technical Data Sheet February 2012 Product Description 3M TM is a high performance, two-part, flexible epoxy adhesive offering high shear and peel adhesion and very high levels of
Product Guide Specification
ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com
Sample Questions for Welding Engineering Examinations
Sample Questions for Welding Engineering Examinations AWS Welding Engineer Revision 2 August 2003 Part 1 Basic Fundamentals of Science Examination Mathematics 1. Determine the acute angle _ when tan 63
Jiangyin Donghao Stainless Steel Pipe Co., Ltd
Jiangyin Donghao Stainless Steel Pipe Co., Ltd March 12 th, 2018 Edition ISO 9001-2008, PED97/23/EC and ASME Boiler and Pressure Vessel Code Certificate certified. Built in 2005, Cover area over 30,000
ETIPD Hardness Tester USER S MANUAL. Please Carefully Read This First. LIPPOLIS optical video technology
ETIPD Hardness Tester USER S MANUAL Please Carefully Read This First LIPPOLIS optical video technology www.lippolis.com e-mail: lippolis@lippolis.com Contents Caution. 1 Applicable Standards... 2 1. Summarize....3
ASTM and the Metals Industry Long-Term Partners for Success
ASTM INTERNATIONAL Helping our world work better ASTM and the Metals Industry Long-Term Partners for Success www.astm.org ASTM International has been the standards development partner of the metals producing
SUPERSTEAM USG LINE UNFIRED STEAM GENERATOR. Humidification. Sterilization. Pharmaceutical
SUPERSTEAM USG LINE UNFIRED STEAM GENERATOR. Humidification. Sterilization. Pharmaceutical Basic USG Package Includes: ASME Code Constructed and National Board Registered Vessel Fiberglass Insulation 20
Roll Bonding or Roll Welding
1 2 3 4 Roll Bonding or Roll Welding The pressure required for welding is applied through a pair of rolls Can be performed hot (Hot Roll Bonding) Surface preparation is important for interfacial bonding
Outline CASTING PROCESS - 2. The Mold in Casting. Sand Casting Mold Terms. Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia
Outline CASTING PROCESS - 2 Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia Casting Molds Gating system pouring basin, sprue, runner, gate Riser Core Heating and melting Melting furnaces Pouring
Compact Electro Plating Machine - CEPM-2A USER MANUAL
1 Compact Electro Plating Machine - CEPM-2A USER MANUAL PRODUCT INTRODUCTION: This compact electroplating machine is a high performance compact plating unit that is especially designed for coating all
QSE MAG FLOW METER OM SERIES OVAL GEAR METER. Water Water-Based Liquid Solutions. Oils Molasses
Flowmeters QSE MAG FLOW METER Non-Intrusive (No moving parts) Electromagnetic Flow Meter Turf / Irrigation Agriculture Irrigation Turf Irrigation Systems Micro Irrigation Systems Institutional Chilled
Nondestructive Examination
Nondestructive Examination by Roger Cantrell Learning Objectives This course introduces the student to the basic concepts of six Nondestructive Examination (NDE) methods used in construction and periodic
2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING
2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING E3305.3: now reads The space equal to the width and depth of the panelboard and extending
OPERATION INSTRUCTION LEEB MULTIFUNCTIONAL HARDNESS TESTER
OPERATION INSTRUCTION OF LEEB MULTIFUNCTIONAL HARDNESS TESTER CONTENTS 1 GENERAL DESCRIPTION 3 2 TEST PRINCIPLE 3 3 FUNCTION AND APPLICATION 4 4 STRUCTURE DESCRIPTION 10 5 OPERATING METHOD AND NOTICES
Techniques for Detection of Surface Defects in Tubing and Pipe
FOERSTER INSTRUMENTS I N C O R P O R A T E D Techniques for Detection of Surface Defects in Tubing and Pipe By: Ronald B Peoples Foerster Instruments Inc. ASNT Level III Certificate # MM-1322 140 INDUSTRY
Application Specific Probes The key to successful coating measurement
Probes and Fixtures Application Specific Probes The key to successful coating measurement Probes are the most important component of systems used to measure coating thickness with either magnetic, magnetic
Effect Of Oxidation In Tin Coated Copper Bus Connections
Effect Of Oxidation In Tin Coated Copper Bus Connections Belden has brought out a line of cables that are all tinned copper. Tinned copper The Statue of Liberty is a famous example of copper oxidation.
Flygt 3057, 50Hz. Technical Specification
Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating and
Probes for coating thickness measurements
Probes for coating thickness measurements Coating Thickness Material Analysis Microhardness Material Testing High-Precision Probes The heart of any electromagnetic measurement system is the probe; the
Activated Black Magic Plus Product Code: Revised Date: 10/26/2016. Activated Black Magic Plus Black Oxide Finish for Steel
Activated Black Magic Plus Black Oxide Finish for Steel Activated Black Magic Plus produces the ultimate in black oxide finishes with its unique patented combination of activators, rectifiers, catalysts,
HYDROMATIC W/D/V-A1 SUBMERSIBLE SUMP/EFFLUENT
PERFORMANCE DATA Wholesale Products Page: 6570-1 RPM: 1550 Discharge: 1 ½ Solids: ½ V-A1 W-A1 D-A1 Head, meters 8 4 Head, feet 30 20 10.3 HP 0 0 Capacity, US GPM 0 10 20 30 40 50 60 liters/second 0.0 1.0
CERTIFIED REFERENCE MATERIALS (CRM)
CERTIFIED REFERENCE MATERIALS (CRM) Sufficiently Homogenized Indian Reference Materials certified by Round robin analysis for the use of validation of methods and calibration. CSIR-National Metallurgical
Handheld Transit-Time Ultrasonic Flowmeter
Handheld Transit-Time Ultrasonic Flowmeter TF1100-EH Handheld Ultrasonic Flow Meter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of
These elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
Stock and Custom Springs
Stock and Custom ISO 9001 Registered Call: 888-777-4647 (888-SPRINGS) Visit: leespring.com Email: sales@leespring.com Fax: 888-426-6655 Why Choose Lee Spring? Selection Lee Spring offers 25,000+ products
Ensuring reliability of measurement results of thickness of metal coatings with the Magneto-Inductive and Eddy-Current
Ensuring reliability of measurement results of thickness of metal coatings with the Magneto-Inductive and Eddy-Current methods in the conditions of the Machine Industry Vladimir A. Syasko, Irina V. Pilatova
SECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System
SECTION 13096 RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13096-1 RF WELDED SYSTEM PART 1 GENERAL 1.1 SECTION
Vickers Hardness Tester (Automatic Turret)
Vickers Hardness Tester (Automatic Turret) Micro-Vickers Hardness Tester (Automatic Turret) Micro-Vickers Hardness Tester (Automatic Turret) Vickers Hardness Tester (Automatic Turret) DIGITAL VHT-A9010ED
DSC differential scanning calorimeter (DSC)
THERMAL ANALYZERS DSC- 2200 differential scanning calorimeter (DSC) Product introduction: DSC is designed to determine the inner heat transition relating to temperature and heat flow, it is widely used
EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS
EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS TMX Saws A History of European Quality & Craftsmanship The history of TMX saws dates to 1921 Poland with manufacturing
SK75/100. Performance Data TOTAL HEAD IN FEET HEAD-METERS 6 SK100 SK Liters/Second Capacity-U.S. G.P.M.
Performance SK75/100 RPM: 1750 Discharge: 2" Solids: 2" Wholesale Products Page: 6300-1 Section: Performance 12 40 9 30 HEAD-METERS 6 3 TOTAL HEAD IN FEET 20 10 SK75 SK100 0 0 Capacity-U.S. G.P.M. 20 40
Practical challenges during high temperature ultrasonic scanning
Practical challenges during high temperature ultrasonic scanning Mr. P. Sukumaran Reliability & Maintenance Department, Equate Petrochemical Company Ahmadi, Kuwait Email: sukumap@equate.com Background:
PORTABLE HARDNESS TESTERS
PORTABLE HARDNESS TESTERS PORTABLE HARDNESS TESTING INNOVATEST offers a wide range of portable hardness testing instruments. Most of the common testing methods are represented in this catalogue. Portable
WATER QUALITY TESTER. MIC water quality tester standard packing : More MIC water quality combo testers
WATER QUALITY TESTER 99702 99720 99701 99703 MIC water quality tester standard packing : 99601 ph : ph meter, two calibration solutions, one soaking solution,battery CR2032 and screw driver are installed
Metals / Wood. Table of contents
194-195 194 194 195 195 196 196 196 196 197 198-199 198 199 200 200 200 201 201 202-205 206 Metals / Wood Table of contents Hardness and micro-hardness Universal hardness tester Brinell Rockwell Vickers
STOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL
STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,
Masterflex Polishing Products
Masterflex Polishing Products How to Order Masterflex Polishing Products When ordering it is important to give as much information about the operation as possible so that the correct grading is supplied.
INSULATED JOINTS. Monolithic Joints for Electrically Isolating Pipelines
INSULATED JOINTS Monolithic Joints for Electrically Isolating Pipelines INSULATED JOINTS TUBE TURNS INSULATED JOINTS are a pre-fabricated, non-separable, union used to isolate specific sections of pipelines
ESU-150. Thin-line Louver Thin-line Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Thin-line Blade is a thin-line stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore Recap Eutectic phase diagram Eutectic phase diagram Eutectic isotherm Invariant point Eutectic Reaction Compositions of components
1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS: 1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION 1. METALS: Metals are chemical elements found in nature
Heat Curing Application Methods. Fastelek Temp. Optimal Heating Temp o F to 270 o F 3 ~ 10 seconds 6 ~ 8 seconds 20 ~ 30 seconds
Fastelek is a customizable heat activated electrically conductive adhesive available in a few performance fillers, thicknesses and phase-change (melt point) temperatures. Fastelek is designed to adhere
FOUNDRY EQUIPMENT FOR THE FERROUS AND NON FERROUS METALS INDUSTRY
Ateco Impianti F O U N D R Y E Q U I P M E N T S FOUNDRY EQUIPMENT FOR THE FERROUS AND NON FERROUS METALS INDUSTRY VERTICAL CONTINUOUS AND SEMI-CONTINUOUS CASTING PLANTS COMPANY PROFILE Ateco was established
Flygt 3057, 50Hz. Technical Specification
Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating