RESUME. : NIT, Rourkela. REC, Rourkela. BEC, Bagalkot.
|
|
- Dortha Sherman
- 5 years ago
- Views:
Transcription
1 RESUME Name : SURESH TOTAPPA DUNDUR Date of birth :21 st May 1962 Birth Place Address Gadag : B-3, Staff Quarters, Basaveshwar Engineering College, BAGALKOT , Karnataka State : sureshdundur@gmail.com Qualifications: Ph.D. M.Sc. (Engg.) B.E. Specialization Institute University Metal Machining, Slipline Field Theory M/c.Design and Analysis Mechanical Engineering NIT, Rourkela REC, Rourkela BEC, Bagalkot. NIT, Rourkela Deemed University Sambalpu University, Orrissa Karnataka University, Dharwad Year of award Areas in Interest/ Research : Title of Ph.D thesis Title of M.Tech thesis Areas of interest : Slipline field analysis of deformation in metal machining with worn tool with adhesion friction in contact regions. : The study of creepage and tangential traction in railroad rail-wheel contact system : M/c. Design, Metal Machining, Slipline field theory Professional Membership: Type of Membership Name of society Membership year 01 Life Member ISTAM Life Member (MISTE) ISTE Fellow Member(FIE) IE 2004
2 Administrative Responsibilities : Nature of work (chairman, coordinator, member etc.) 1. Professor and Head, Department of Industrial and Production Engineering, 2. Coordinator Industry Institute Partnership Cell (BEC-IIPC) 3. Coordinator for promoting Industry Institute Interaction under TEQIP Worked for (University, college, etc.) Basaveshwar Engineering College, Bagalkot. -do do Principal Hiresugar Institute of Technology, Nidasosi 5. Principal Biluru Gurubasava Mahaswamiji Institute of Technology, Mudhol Year / Year of work Since & List of publications Books published : Title of the Book Publisher National or 1 Metal Cutting Principles and Analysis: Deformation studies in machining with a tool with flank wear VDM Verlag Journal papers published : 1 Slipline solutions for metal machining Proc. IMechE, Vol. 219 Part with adhesion friction and elastic effects at the tool contact region- N.S.Das and S.T. B, Journal of Engineering Manufacture, pp , A slipline filed analysis of free-chip orthogonal machining with adhesion friction at rake face- N.S.Das and S.T. IJ Machining Sc.&Tech, 10: , Slipline filed modeling of orthogonal machining for a worn tool with elastic effects and adhesion friction at the contact regions- S.T. and N.S.Das Journal of Material Processing Technology, Volume 209, Issue 1, pp , 2009
3 4 Slipline field analysis of free-chip Int. J. for Manufac.Sc. and machining with a tool with flank wear- S.T. and N.S.Das Tech., Vol. 8, 2, pp. 60, Analysis of adhesion friction in contact regions of metal machining - S.T. and N.S.Das National Conference on "Recent Advances in Industrial Tribology and Maintenance" held during 20-21st Jan 2006 National 6 Study and Analysis of Effect of Cutting Parameters on Cutting Forces and Surface Roughness 7 Finite Element Simulation to study the effect of flank wear land inclination on Cutting forces and temperature distribution in orthogonal machining 8 Influence of flank wear land inclination on attributes of orthogonal machining using slip line field 9 Study the influence of machining parameters on the inclination of flank wear land with cutting direction 10 An Investigation of Flank Wear Land Inclination in Orthogonal Machining 11 Stream line plotting in deformation zones of a slip line field for worn tool, Advanced Engineering and Applied Sciences: An Journal Vol. 5(3) page year 2015 Journal of Engineering and Fundamentals, Vol. 1(1), page , December, 2014 Journal Mechanical Engineering and Technology, Vol 5(4) page ,Apr2014 Journal of Information, Knowledge and Research in Mechanical Engineering, Volume 2 issue 2, page ,Nov 2013 Journal for Manufacturing Science and Production, Volume 13, Issue 1-2, Page April 2013 Conference on Advanced Materials, Manufacturing, Management & Thermal Sciences (AMMMT-2013), SIT, TUMKUR, May 03-04, 2013,AM81 Conference
4 12 Optimization of dry turning parameters The Journal of Engineering on surface roughness and hardness of Austenitic Stainless steel (AISI316) by Taguchi Technique Rajendrakumar V. Kadi and Suresh T. and Fundamentals, Volume 2 Issue 2 December Effect of Cutting Parameters on Surface Quality of AISI 316 Austenitic Stainless Steel in CNC Turning Prajwalkumar M. Patil, Rajendrakumar V. Kadi, Suresh T. and Anil S. Pol Research Journal of Engineering and Technology (IRJET) Volume: 02 Issue: 04 July Studies on Mechanical and Machinability Properties of B4Cp reinforced 6061 Aluminum MMC produced via melt stirring. Vijaykumar Hiremath, S. T., Bharath Raj L, Rajesh G. L and V. Auradi 15 Experimental Investigation of Cutting Forces, Surface Roughness in the Turning of B4Cp reinforced 6061 Aluminium Metal Matrix Composites. Vijaykumar Hiremath, S. T., Bharath Raj L. and V. Auradi 16 Machining of metal matrix composites: Influence of B4C ceramic particulate addition on Cutting forces and Surface roughness of 6061Al Alloy. Vijaykumar Hiremath, V. Auradi and S. T. 17 Influence of particle size on Cutting Forces and Surface Roughness in Machining of B4Cp Aluminium Matrix Composites. Vijaykumar Hiremath, Pradeep Badiger, V Auradi, S T and S A Kori 18 Experimental Investigations on Effect of Ceramic B4C particulate addition on Cutting Forces and Surface Roughness during Turning of 6061Al Alloy. Vijaykumar Hiremath, V. Auradi and S. T. Applied Mechanics and Materials (Vols (2014) pp ), Transtech Publications, Switzerland Journal of Applied Engineering Research, Vol (2015, Research India Publications Journal of Machining and Machinability of Materials, Inderscience Publishers Int. J. Vol. 18, 4, 2016 IOP Conf. Series: Materials Science and Engineering 114 (2016) doi: / x/114/1/ Transactions of Indian Ceramic Society, Taylor and Francis Publishers, UK
5 19 Comparative Analysis of effect of Turning Parameters on Surface Roughness and Hardness of Austenitic Stainless Steel under dry and conventional cooling conditions Rajendrakumar V. Kadi, Dr. Suresh T. Journal of Advanced Production and Industrial Engineering (IJAPIE) (ISSN: ) Accepted for publication
id(s): Courses taught:
Name: Designation: Professor Dr. H. Suresh Hebbar Atawale Qualification: Ph.D., (IIT Delhi, 1999), Tribology of Composite Materials M.E. (Indian Institute of Science, Bangalore, 1987 ), Machine Design
More informationBIODATA. Month & year of passing
BIODATA NAME & ADDRESS:Basavaraj M. Angadi Department of Mechanical Engineering BLDEA s Vachana Pitamaha Dr.P.G.Halakatti College of Engg & Tech Vijayapur-586103, Institute mail id: mech.angadi@bldeacet.ac.in
More informationInfluence of particle size on Cutting Forces and Surface Roughness in Machining of B 4. C p Aluminium Matrix Composites
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Influence of particle size on Cutting Forces and Surface Roughness in Machining of B 4 C p - 6061 Aluminium Matrix Composites
More informationMALOUT INSTITUTE OF MANAGEMENT & INFORMATION TECHNOLOGY
MALOUT INSTITUTE OF MANAGEMENT & INFORMATION TECHNOLOGY Name: Dr. Rajesh Choudhary FACULTY PROFILE Designation : Assistant Professor, Incharge Mechanical Engg. Deptt. Qualification: Ph.D (Mechanical Engg.)
More informationInvestigation On Mechanical Properties Of Red Mud And Fly Ash Particulate Reinforced Al6061 Metal Matrix Composite
Investigation On Mechanical Properties Of Red Mud And Fly Ash Particulate Reinforced Al6061 Metal Matrix Composite Sachin Kumar Advance Material Science and Technology, National Institute of Technology
More informationThe National Institute of Engineering, Mysore FACULTY PROFILE
01. Name of the Faculty [in Block Letters] The National Institute of Engineering, Mysore FACULTY PROFILE DR. Y S VARADARAJAN 02. Date of Birth DD MM YYYY 03. Sex Male Female 04. Designation 05. Department
More informationA novel method in the production and Optimization of Process Parameters in turning LM6 Aluminium alloy with Borosilicate Reinforcement
International Journal of ChemTech Research CODEN (USA): IJCRGG, ISSN: 0974-4290, ISSN(Online):2455-9555 Vol.10 No.14, pp 110-116, 2017 A novel method in the production and Optimization of Process Parameters
More informationThe effect of ceramic reinforcement on the Microstructure, Mechanical properties and Dry sliding wear behavior of hypo-eutectic Al-Si-Mg alloy
The effect of ceramic reinforcement on the Microstructure, Mechanical properties and Dry sliding wear behavior of hypo-eutectic Al-Si-Mg alloy Avinash L 1, M.H. Annaiah 2, Davis P skariah 3, Swetha S 4,
More informationInvestigation on Surface Quality in Machining of Hybrid Metal Matrix Composite (Al-SiC B4C)
International Conference on Thermal, Material and Mechanical Engineering (ICTMME'0) July 5-6, 0 Singapore Investigation on Surface Quality in Machining of Hybrid Metal Matrix Composite (Al-SiC B4C) Vignesh.
More informationPrediction model for torque on drilling of metal matrix composites
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Prediction model for torque on drilling of metal matrix composites To cite this article: S Senthilbabu et al 2018 IOP Conf. Ser.:
More informationWear Characteristics of AA5050/TiC Metal Matrix Composites
Wear Characteristics of AA5050/TiC Metal Matrix Composites A. Chennakesava Reddy Associate Professor, Department of Mechanical Engineering, JNTU College of Engineering, Hyderabad, India dr_acreddy@yahoo.com
More informationPh.D. BIET / VTU Composite Materials. UBDTCE / Kuvempu University. B.E. Industrial Production Engineering
Updated on: (Mention the date on which you edit this document). Name: Dr. RAJANEESH N. MARIGOUDAR. Designation: Professor & Head of the Department. Department: Mechanical Engineering 4. Academic Background:
More informationDry sliding wear behavior of heat treated A2014 reinforced with Graphite
Dry sliding wear behavior of heat treated A2014 reinforced with Graphite Karthik Raj K.V 1, M.H. Annaiah 2, Manjunatha B 3, Davis P Skariah 4, Harendra Kumar H.V 4 P G student, Department of Mechanical
More informationOptimizing Machining Parameters Using Carbide Insert for Rough Mild Steel Surfaces
International Journal of Theoretical and Applied Mechanics. ISSN 0973-6085 Volume 12, Number 1 (2017) pp. 93-101 Research India Publications http://www.ripublication.com Optimizing Machining Parameters
More informationEvaluation of Mechanical Properties of Boron Carbide and Short E-Glass Fiber Reinforced with Aluminium 2014 for Aircraft Application
Evaluation of Mechanical Properties of Boron Carbide and Short E-Glass Fiber Reinforced with Aluminium 2014 for Aircraft Application Hannan Pasha 1, Dr N.G.S Udupa 2, Dr Shantharaja.M 3 1,2 Department
More informationOPTIMIZATION OF EDM PROCESS PARAMETERS ON HYBRID COMPOSITE WITH ONE FACTOR APPROACH
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 5, May 2017, pp. 567 576, Article ID: IJMET_08_05_062 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=5
More informationBIO-DATA Prof. Vinod Kumar
BIO-DATA Prof. Vinod Kumar 1. Name :Dr. Vinod Kumar 2. Designation : Professor 3. Department : Mechanical Engineering 4. Date of Birth : 21.09.1970 5. Address for Correspondence : Department of Mechanical
More informationInvestigation of Dry Sliding Wear Behavior of Aluminium 6061 with Ferro-Titanium Metal Matrix Composite
07 IJRTI Volume, Issue 5 ISSN: 456-5 Investigation of Dry Sliding Wear Behavior of Aluminium 606 with Ferro-Titanium Metal Matrix Composite Pradeep Kumar Ilay, Dr. GirishaL, Jagadeesh Sannagoudra, 4 Lava
More informationFINITE ELEMENTSIMULATION IN ORTHOGONAL MACHINING OF INCONEL 718 ALLOY
FINITE ELEMENTSIMULATION IN ORTHOGONAL MACHINING OF INCONEL 718 ALLOY P.DEEPAGANESH. ME CAD/CAM, Shanmuganathan Engineering College, Pudukottai. ABSTRACT Knowing the stringent operating conditions to which
More informationVELAMMAL ENGINEERING COLLEGE, CHENNAI
VELAMMAL ENGINEERING COLLEGE, CHENNAI DEPARTMENT OF MECHANICAL ENGINEERING Name : Dr. S.Satish kumar Designation : Professor & Head Qualification : B.E.(Mech.), M.E., Ph.D Specialization : Manufacturing
More informationInternational Research Journal of Engineering and Technology (IRJET) e-issn: Volume: 03 Issue: 07 July p-issn:
Effect of cooling rate and other factors on size and pattern of distribution of TiB2 particles formed during solidification of the Al- TiB2 melt for various pouring temperatures P.Senthil Kumar 1, P.R.Lakshminarayanan
More informationEffects of Carbon Black Nanoparticles on Wear Resistance of AA6063/CB Metal Matrix Composites
International Journal of Materials Science ISSN 0973-4589 Volume 12, Number 1 (2017), pp. 87-95 Research India Publications http://www.ripublication.com Effects of Carbon Black Nanoparticles on Wear Resistance
More informationWear Behaviour of Al6063-Zircon Sand Metal Matrix Composite
IOSR Journal of Engineering (IOSRJEN) e-issn: 2250-3021, p-issn: 2278-8719 Vol. 3, Issue 2 (Feb. 2013), V3 PP 24-28 Wear Behaviour of Al6063-Zircon Sand Metal Matrix Composite K.S.Sucitharan 1, P.SenthilKumar
More informationApplication of Taguchi Method for Optimization of Process Parameters for Wear loss of LM25/Flyash Composite
Application of Taguchi Method for Optimization of Process Parameters for Wear loss of LM25/Flyash Composite Bharat Admile PG Student, SKNSCOE, Pandharpur G.Kulkarni Professor, SKNSCOE, Pandharpur S.A.
More informationOptimal Machining Conditions For Turning Of AlSiC Metal Matrix Composites Using ANOVA
Optimal Machining Conditions For Turning Of AlSiC Metal Matrix Composites Using ANOVA J. Satheesh 1, Tajamul Pasha 2, Harish 3, T. Madhusudhan 4 Professor, Department of Mechanical Engineering, SJB Institute
More informationSynthesis and Characterization of SiC Reinforced HE-30 Al Alloy Particulate MMCs
Synthesis and Characterization of SiC Reinforced HE-30 Al Alloy Particulate MMCs Pradyumna Phutane *1, VijayKumar S. Jatti **2, Ravi Sekhar **3, T.P.Singh #4 * Research Scholar, Symbiosis Institute of
More informationDevelopment of a Mathematical Model to study the fluidity in Thixoforming using Fuzzy Logic Approach
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 13, Issue 6 Ver. VI (Nov. - Dec. 2016), PP 09-16 www.iosrjournals.org Development of a Mathematical
More informationThe Effect of Heat Treatment on Mechanical properties and Dry sliding wear behavior of A2014 reinforced with Alumina
The Effect of Heat Treatment on Mechanical properties and Dry sliding wear behavior of A2014 reinforced with Alumina T.G. Rajiv 1, Sangeeth.P.T 2, M.H. Annaiah 3, C.G. Ranjani 4, Harendra Kumar H.V 5 Asst
More informationMechanical properties and Dry sliding wear behavior of A2014 reinforced with Alumina
Mechanical properties and Dry sliding wear behavior of A2014 reinforced with Alumina Sangeeth.P.T 1, T.G. Rajiv 2, M.H. Annaiah 3, R. Seetharamaiah 4, G.S. Narasimha Murthy 5 P G student, Department of
More informationOn the Wear of AA4015 Fused Silica Metal Matrix Composites. A. Chennakesava Reddy
On the Wear of AA4015 Fused Silica Metal Matrix Composites A. Chennakesava Reddy Associate Professor, Department of Mechanical Engineering, Vasavi College of Engineering, Hyderabad, India dr_acreddy@yahoo.com
More informationFACULTY PROFILE. Class /CGPA I class % I class 70.05% I class with Distinction Ph.D Date of joining :
Staff Official Address with E-mail Id FACULTY PROFILE : S.R.Sundara Bharathi Mobile Number : 96880464. Personal Details Age : 35 Date of Birth : 0.07.98 Sex & Marital Status Citizenship Qualification :
More informationMicrostructure, Mechanical properties and Damping behaviour of hybrid composite of A356.0
Microstructure, Mechanical properties and Damping behaviour of hybrid composite of A356. Vinayak Janiwarad, Shadakshari R, M.H. Annaiah 3,Dr.Mahesha K 4,Harendra kumar H.V 5 P G student, Department of
More informationEvaluation of Optimal Parameters for Machining of SS 430 with Wire Cut EDM Manish Garg 1 Gurmeet Singh 2
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 06, 2015 ISSN (online): 2321-0613 Evaluation of Optimal Parameters for Machining of SS 430 with Wire Cut EDM Manish Garg
More informationThe Effect of Heat treatment on Microstructure, Mechanical properties and Damping behaviour of hybrid composite of A356.0
The Effect of Heat treatment on Microstructure, Mechanical properties and Damping behaviour of hybrid composite of A356. Vinayak Janiwarad 1, Shadakshari R 2, M.H. Annaiah 3, Dr.Mahesha K 4,Harendra kumar
More informationAPPLICATIONS OF ANOVA IN VALIDATING HYBRID MMC MACHINABILITY DATA
APPLICATIONS OF ANOVA IN VALIDATING HYBRID MMC MACHINABILITY DATA M. Kathirvel 1, S. Purushothaman 2 and R. Subhash Chandra Bose 3 1 Department of Mechanical Engineering, Sun College of Engineering and
More informationWEIGHT LOSS FUNCTIONS FOR TOLERABLE WEAR RATE OF AA1100/BN METAL MATRIX COMPOSITES
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 5, September October 2016, pp.09 17, Article ID: IJMET_07_05_002 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=5
More informationMachinability Studies of Turning Al/SiC/B 4 C Hybrid Metal Matrix Composites using ANOVA Analysis
International Conference on Thermal, Material and Mechanical Engineering (ICTMME'0) July 5-6, 0 Singapore Machinability Studies of Turning Al/SiC/B 4 C Hybrid Metal Matrix Composites using ANOVA Analysis
More informationPROFILE OF Dr TILAK RAJ. Officiating Registrar of YMCA University of Science and Technology.
PROFILE OF Dr TILAK RAJ Officiating Registrar of YMCA University of Science and Technology NAME IN FULL : Tilak Raj DATE OF BIRTH : 09-09-1964 E-MAIL : tilakraj64@rediffmail.com, tilakraj64@gmail.com,
More informationEffect of Soft Material Hardness and Hard Material Surface Morphology on Friction and Transfer Layer Formation; Dry Condition
International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-2, Issue-4, September 213 Effect of Soft Material Hardness and Hard Material Surface Morphology on Friction and
More informationmetal matrix composites using Taguchi design of experiments
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Wear performance optimization of stir cast Al-TiB 2 metal matrix composites using Taguchi design of experiments To cite this article:
More informationEffect of Cutting Parameters on Tool Life
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2016 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Sandip
More informationExperimental Investigation of Thermal behaviour on Rice Husk Ash-Alumina Reinforced with Al6063 Alloy Matrix
Experimental Investigation of Thermal behaviour on Rice Husk Ash-Alumina Reinforced with Al6063 Alloy Matrix Mruthyunjayagouda 1, G.Manavendra 2 P.G. Student, Department of Mechanical Engineering, BIET
More informationHeat Treatment Effect on the Hardness of Aluminium LM13 MgO Particulate Composite
International Journal of Engineering Research and Advanced Technology (IJERAT) E-ISSN : 2454-6135 DOI: http://dx.doi.org/10.7324/ijerat.2018.3180 Volume.4, Issue 1 January-2018 Heat Treatment Effect on
More informationInternational Research Journal of Engineering and Technology (IRJET) e-issn: Volume: 05 Issue: 12 Dec p-issn:
Experimental Investigation and Optimization of Wear Characteristics of Aluminium Metal Matrix Composite Reinforced with Sillimanite (Al2SiO5) by using Taguchi Technique Ashwini R. Jogdand 1, Dr. S. B.
More informationMACHINING STUDY OF AL-SICP METAL MATRIX NANO COMPOSITE DEVELOPED BY ULTRASONIC ASSISTED CASTING PROCESS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 10, October 2018, pp. 1484 1492, Article ID: IJMET_09_10_154 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=10
More informationDepartment of Mechanical Engineering
Velammal College Department of Mechanical Name & Photo : Dr. A. PRADEEP Designation: Qualification : ASSISTANT PROFESSOR III M.E., Ph.D. Area of Specialization : Teaching Experience : Welding, Manufacturing
More informationMorteza Abedini. Research Interests
Morteza Abedini Address: Department of Metallurgy and Materials Engineering, Faculty of Engineering, University of Kashan, Kashan, Iran Scientific Position: Assistant Professor Phone: 0098-3155913402 E-mail:
More informationManufacturing Processes 1 (MDP 114)
Manufacturing Processes 1 (MDP 114) First Year, Mechanical Engineering Dept., Faculty of Engineering, Fayoum University Dr. Ahmed Salah Abou Taleb 1 Cutting-Tool Materials and Cutting Fluids 2 Fracture
More informationCOMPARATIVE STUDIES ON MECHANICAL CHARACTERISTICS OF GRANULATED BLAST FURNACE SLAG AND FLY ASH REINFORCED ALUMINIUM COMPOSITES
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 11, November 2017, pp. 277 284, Article ID: IJMET_08_11_030 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=11
More informationInvestigation of Electro Chemical Micro Machining process parameters on Al- SiCp - Gr Composites using Taguchi Methodology
International Journal of ChemTech Research CODEN (USA): IJCRGG ISSN: 0974-4290 Vol.8, No.8, pp 278-285, 2015 Investigation of Electro Chemical Micro Machining process parameters on Al- SiCp - Gr Composites
More informationA study of microstructure and wear behaviour of TiB 2 /Al metal matrix composites
8(2011) 1 8 A study of microstructure and wear behaviour of TiB 2 /Al metal matrix composites Abstract The present paper deals with the study of microstructure and wear characteristics of TiB 2 reinforced
More informationINVESTIGATION OF WEAR BEHAVIOUR OF Al 6061 ALLOY REINFORCED WITH SiC, AlR2ROR3R AND E GLASS FIBER
Assistant International Journal of Scientific Engineering and Applied Science (IJSEAS) - Volume-, Issue-5, August 05 INVESTIGATION OF WEAR BEHAVIOUR OF Al 606 ALLOY REINFORCED WITH SiC, AlRRORR AND E GLASS
More informationSTUDY ON DESIGN AND STATIC ANALYSIS OF PISTON HEAD
STUDY ON DESIGN AND STATIC ANALYSIS OF PISTON HEAD Amitanand B Suralikerimath 1, Yallanagouda I Ninganagoudar 2, C.M Veerendrakumar 3 1 Student, Department of Mechanical Engineering, Basaveshwar Engineering
More informationA Study on Dry Sliding Wear Behaviour of Al Redmud Composite
A Study on Dry Sliding Wear Behaviour of Al- 6061 Redmud Composite Ravi C Naikar 1, Dr.G B. Rudrakshi 2, Dr. S M. Jigajinni 3 P.G. Student, Department of Mechanical Engineering, Basaveshwar Engineering
More informationInvestigations for Mechanical Properties of Metal Matrix Composite Prepared by Combining FDM, Vacuum Moulding and Stir Casting
th International & 6 th All India Manufacturing Technology, Design and Research Conference (AIMTDR ) December th th,, Investigations for Mechanical Properties of Metal Matrix Composite Prepared by Combining
More informationFluid Structural Thermal Analysis of Cylindrical Journal Bearing
Fluid Structural Thermal Analysis of Cylindrical Journal Bearing K Aparna Assistant Professor Department of Thermal Engineering Ellenki College of Engineering and Technology Telangana, India. ABSTRACT
More informationDry sliding wear of heat treated hybrid metal matrix composites
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Dry sliding wear of heat treated hybrid metal matrix composites To cite this article: Mohammed Naveed and A R Anwar Khan 2016
More informationDetermination of Optimal Cutting Conditions in Orthogonal Metal Cutting Using LS-DYNA with Design of Experiments Approach.
8 th International LS-DYNA Users Conference Metal Forming (1) Determination of Optimal Cutting Conditions in Orthogonal Metal Cutting Using LS-DYNA with Design of Experiments Approach. David P. Masillamani
More informationWear Testing of Stir Casted Al -Al 2 O 3 MMC Vijayesh Rathi 1 Jasvinder Kumar 2 Gaurav Kochar 3
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 07, 2015 ISSN (online): 2321-0613 Wear Testing of Stir Casted Al -Al 2 O 3 MMC Vijayesh Rathi 1 Jasvinder Kumar 2 Gaurav
More information2017 WJTA-IMCA Conference and Expo October 25-27, 2017 New Orleans, Louisiana Paper
2017 WJTA-IMCA Conference and Expo October 25-27, 2017 New Orleans, Louisiana Paper AN ANALYSIS OF THE ABRASİVE WATER JET MACHINING OF POLYETHYLENE USING L9 ORTHOGONAL ARRAY F. Kartal The University of
More informationOptimization of WEDM Parameters using Taguchi Technique in Machining of Metal Matrix Composite Material
Optimization of WEDM Parameters using Taguchi Technique in Machining of Metal Matrix Composite Material [1] Gurupavan H R, [2] Devegowda T M, [3] H V Ravindra [1] Research Scholar, [2] Assistant Professor,
More information[ICAMS: March 2017] ISSN: IMPACT FACTOR
EFFECTS OF PROCESS PARAMETERS ON SURFACE ROUGHNESS OF AL6061- SIC METAL MATRIX COMPOSITE THROUGH WIRE CUT ELECTRO DISCHARGE MACHINING USING TAGUCHI METHOD Veeresha R B *1, Prashantha S 2 & S M Shashidhara
More informationOptimization of Machining Parameters for Turning Mild Steel Using Design of Experiment
International Conference of Advance Research and Innovation (-2015) Optimization of Machining Parameters for Turning Mild Steel Using Design of Experiment Parshvam Jain *, Ranganath M S, Vipin, R. S. Mishra,
More informationA review on Tensile strength and Hardness using Aluminium as Matrix Material and E-glass, Rice Husk Ash, and Fly ash as Reinforcement
A review on Tensile strength and Hardness using Aluminium as Matrix Material and E-glass, Rice Husk Ash, and Fly ash as Reinforcement Vishal¹, Dr. J Satheesh² ¹M.Tech student, Machine Design, Mechanical
More informationTool Wear Detection of Cutting Tool Using Matlab Software
International Journal of Engineering and Technical Research (IJETR) Tool Wear Detection of Cutting Tool Using Matlab Software S.P. Patil, D. M. Tilekar Abstract Tool wear in machining processes is directly
More informationMechanical Properties and Microstructure of Al-7075-BA Hybrid Composites
Mechanical Properties and Microstructure of Al-7075-BA Hybrid Composites Mohammed Imran 1, Dr. A.R Anwar Khan 2 1Research scholar, Department of Mechanical Engineering, Ghousia College of Enginnering-Ramanagaram-
More informationInfluence of Cutting Parameters in Machining of Titanium Alloy
Indian Journal of Science and Technology, Vol 8(S8), 556 562, April 2015 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 DOI: 10.17485/ijst/2015/v8iS8/71291 Influence of Cutting Parameters in Machining
More informationA Study on Mechanical Properties of Fly Ash and Alumina Reinforced Aluminium Alloy (LM25) Composites.
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 7, Issue 6 (Jul. - Aug. 2013), PP 41-46 A Study on Mechanical Properties of Fly Ash and Alumina
More informationSTUDIES ON MECHANICAL BEHAVIOR OF AA7030-B4C METAL MATRIX COMPOSITES WITH HEAT TREATMENT
STUDIES ON MECHANICAL BEHAVIOR OF AA7030-B4C METAL MATRIX COMPOSITES WITH HEAT TREATMENT Purushothama N 1, Sudindra S 2, Madeva Nagaral 3 1Postgraduate Student, Dept. of Mechanical Engineering, AMC Engineering
More informationExperimental Study on Tool Parameters of Al2O3 in High Speed Machining
International Journal of Current Engineering and Technology E-ISSN 2277 416, P-ISSN 2347 5161 215INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Study on
More informationSliding wear studies of microwave clad versus unclad surface of stainless steel 304
Sliding wear studies of microwave clad versus unclad surface of stainless steel 304 Akshata M. K. 1*, Ajit M. Hebbale 1, and Srinath M. S. 1 1 Department of Mechanical Engineering, NMAM Institute of Technology,
More informationEVALUATON OF MECHANICAL PROPERTIES ON AS CAST AND HEAT TREATED AL7075 ALLOY REINFORCED WITH ALBITE PARTICULATE COMPOSITES
EVALUATON OF MECHANICAL PROPERTIES ON AS CAST AND HEAT TREATED AL7075 ALLOY REINFORCED WITH ALBITE PARTICULATE COMPOSITES Batluri Tilak Chandra*, Sanjeevamurthy**, H. S. Shiva Shankar*** *Research scholar,
More informationComparative Investigation of Mechanical Properties of Aluminium Based Hybrid Metal Matrix Composites
(AET- 29th March 24) RESEARCH ARTICLE OPEN ACCESS Comparative Investigation of Mechanical Properties of Aluminium Based Hybrid Metal Matrix Composites Dinesh Kumar*, Jasmeet Singh** *(Research scholar,
More informationStudies on parametric optimization for abrasive water jet machining of Al7075-TiB 2. in-situ. Composite
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Studies on parametric optimization for abrasive water jet machining of Al7075-TiB 2 in-situ composite To cite this article: J
More informationOPTIMIZATION OF CASTING PARAMETERS ON Al/RHA COMPOSITE USING TAGUCHI METHOD
Advanced Materials Research Online: 2014-07-16 ISSN: 1662-8985, Vols. 984-985, pp 291-296 doi:10.4028/www.scientific.net/amr.984-985.291 2014 Trans Tech Publications, Switzerland OPTIMIZATION OF CASTING
More informationMechanical Properties of Fly Ash Reinforced Aluminium 6061 Composite
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X PP. 55-59 www.iosrjournals.org Mechanical Properties of Fly Ash Reinforced Aluminium 6061 Composite Niranjan
More informationSLIDING WEAR OF AA6061/CARBON BLACK METAL MATRIX COMPOSITES
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 2, February 2017, pp. 203 209 Article ID: IJMET_08_02_025 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=2
More informationDESIGN AND STUDY OF THE EFFECT OF MULTIPLE MACHINING PARAMETERS IN TURNING OF AL6063T6 USING TAGUCHI METHOD
International Journal of Design and Manufacturing Technology (IJDMT) Volume 7, Issue 3, Sep Dec 216, pp. 12 18, Article ID: IJDMT_7_3_2 Available online at http://iaeme.com/ijdmt/issues.asp?jtype=ijdmt&vtype=7&itype=3
More informationComparative Performance Analysis of Cryogenic Treated Carbide Tools
2017 IJSRST Volume 3 Issue 7 Print ISSN: 2395-6011 Online ISSN: 2395-602X Themed Section: Science and Technology Comparative Performance Analysis of Cryogenic Treated Carbide Tools Sameem Ahmed 1, P S
More informationWear Behavior of Al 2 O 3 and Graphite Particulates Reinforced Al6061 Alloy Hybrid Composites
American Journal of Materials Science 2015, 5(3C): 25-29 DOI: 10.5923/c.materials.201502.05 Wear Behavior of Al 2 O 3 and Graphite Particulates Reinforced Al6061 Alloy Hybrid Composites Madeva Nagaral
More informationInternational Journal of Engineering Research and General Science Volume 4, Issue 2, March- April, 2016 ISSN
Mechanical Properties of Al6061 Based Metal Matrix Composites Reinforced with Ceramic Particulates and Effect of Age Hardening on its Tensile Characteristics G.Shaikshavali 1, Dr. E.Venugopal goud 2, M.Murali
More informationInvestigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
Proceedings of the World Congress on Engineering 8 Vol III WCE 8, July 2-4, 8, London, U.K. Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning SThamizhmanii* and S.Hasan
More informationMULTI-OBJECTIVE OPTIMIZATION OF TRIBOLOGICAL PARAMETERS OF HYBRID COMPOSITES USING GREY RELATIONAL ANALYSIS
Int. J. Chem. Sci.: 14(2), 2016, 1172-1182 ISSN 0972-768X www.sadgurupublications.com MULTI-OBJECTIVE OPTIMIZATION OF TRIBOLOGICAL PARAMETERS OF HYBRID COMPOSITES USING GREY RELATIONAL ANALYSIS S. PERUMAL
More informationOPTIMIZATION OF CASTING PARAMETERS FOR CASTING OF AL/RHA/RM HYBRID COMPOSITES USING TAGUCHI METHOD
OPTIMIZATION OF CASTING PARAMETERS FOR CASTING OF AL/RHA/RM HYBRID COMPOSITES USING TAGUCHI METHOD A. PAVAN KUMAR #1, B. JYOTHU NAIK *2, CH. VENKATA RAO #3, SADINENI RAMA RAO *4 1 M. Tech Student, Mechanical
More informationTool Life Performances on Turning Austenised and Quenched AISI Bearing Steel with Ceramics and CBN/TiC Cutting Tools
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Tool
More informationSTATUS OF FEM MODELING IN HIGH SPEED CUTTING - A Progress Report -
STATUS OF FEM MODELING IN HIGH SPEED CUTTING - A Progress Report - Dr. Taylan Altan, Professor and Director Partchapol (Jay) Sartkulvanich, Graduate Research Associate Ibrahim Al-Zkeri, Graduate Research
More informationEvaluation of Machining Parameters Influencing Thrust Force in Drilling of Al SiC Gr Metal Matrix Composites using RSM
Evaluation of Machining Parameters Influencing Thrust Force in Drilling of Al SiC Gr Metal Matrix Composites using RSM A. Munia raj Department of Mechanical Engineering, AMET University, Chennai Tamilnadu,
More informationInfluence of machining parameters on cutting tool life while machining aluminum alloy fly ash composite
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Influence of machining parameters on cutting tool life while machining aluminum alloy fly ash composite To cite this article:
More informationParametric Optimization for Friction Stir Welding of Al6061 Alloy using Taguchi Technique
Parametric Optimization for Friction Stir Welding of Al6061 Alloy using Taguchi Technique Lingam Satyavinod 1, R Harikishore 2 1 Student, Department of Mechanical Engineering, DNREng College, Bhimavaram,
More informationInterfacial Debonding of Boron Nitride Nanoparticle Reinforced 6061 Aluminum Alloy Matrix Composites
2nd National Conference on Materials and Manufacturing Processes Hyderabad, Andhra Pradesh, India Interfacial Debonding of Boron Nitride Nanoparticle Reinforced 6061 Aluminum Alloy Matrix Composites 1
More informationOptimization of Cutting Parameters for surface roughness and MRR in CNC Turning of 16MnCr5
Optimization of Cutting Parameters for surface roughness and MRR in CNC Turning of 16MnCr5 Jitendra Kumar Verma M. Tech Student, Department of Mechanical Engineering, Geeta Engineering College, Panipat,
More informationWear Optimization of Al/Sic/Gr Hybrid MMC Using Taguchi and ANOVA
Wear Optimization of Al/Sic/Gr Hybrid MMC Using Taguchi and ANOVA T. PratheepReddy 1, N. Amara Nageswara Rao 2 P.G. Student, Department of Mechanical Engineering, N.I.S.T, Vijayawada, A.P, India. Associate
More informationEffects of Applied Pressure on the Wear Behavior of Brake Lining Sliding Against Ferrous and Nonferrous Disc
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 4, Number 3 (2014), pp. 285-290 Research India Publications http://www.ripublication.com/ijame.htm Effects of Applied Pressure
More informationStudy of Hardness and Optimization of Wear Properties of AL 7075 Hybrid Composite
Study of Hardness and Optimization of Wear Properties of AL 7075 Hybrid Composite P. Sandeep Kumar Assistant Professor S.Pichi Reddy Professor G. Kartheek Assistant Professor Abstract Waste sugarcane Bagasse-ash
More informationEFFECT OF PERCENTAGE REINFORCEMENT OF B4C ON THE TENSILE PROPERTY OF ALUMINIUM MATRIX COMPOSITES
Int. J. Mech. Eng. & Rob. Res. 2012 Gopal Krishna U B et al., 2012 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 1, No. 3, October 2012 2012 IJMERR. All Rights Reserved EFFECT OF PERCENTAGE REINFORCEMENT
More informationProcessing of Low cost and Light Weight Al-SiC Metal Matrix Composites
Processing of Low cost and Light Weight Al-SiC Metal Matrix Composites T. Surya Prakash M.Tech Student, Department of Mechanical Engineering, Under the Guidance of Dr. A. Chennakesava Reddy, Associate
More informationOriginal Research Article
Taguchi loss function apply on influencing of different tools in machining process parameters to optimize. TAGUCHI LOSS FUNCTION APPLY ON INFLUENCING OF DIFFERENT TOOLS IN MACHINING PROCESS PARAMETERS
More informationFinite Element Analysis of Single Point Cutting Tool
International OPEN ACCESS Journal Of Modern Engineering Research (IJMER) Finite Element Analysis of Single Point Cutting Tool S. H. Rathod 1, Mohd. Razik 2 1Pursuing M.E. Mechanical Engineering, Department,
More informationCurriculum Vitae. Assistant Professor in Mechanical & Industrial Engineering, IIT Roorkee.
Dr. Manish Mishra Curriculum Vitae Designation - Date of Birth - 2-4-1970 Assistant Professor in Mechanical & Industrial Engineering, IIT Roorkee. Qualification - BE (Mechanical), ME (Energy Systems &
More informationInternational Journal on Mechanical Engineering and Robotics (IJMER)
A Review on Tribological And Mechanical Behaviors of Aluminium Metal Matrix Composites 1 V. Hariharan, 2 V.Mohankumar, 3 P.Gnaneswaran 1 Professor, 2 PG Scholar, Department of Mechanical Engineering, Kongu
More information