Molecular Weight. Solubility in Water misc ll 16 ul v sol 15 ºC
|
|
- Fay Hudson
- 5 years ago
- Views:
Transcription
1 Acids and Anhydrides, Organic: Physical & chemical properties, Guide to Chemicals, Encyclopaedia of Occupational Health and Safety, Jeanne Mager Stellman, Editor-in-Chief. International Labor Organization, Geneva Chemical Name CAS-Number ACETIC ACETIC ANHYDRIDE ACETYLSALICYLIC ACRYLIC ADIPIC L-ASCORBIC BENZOIC BUTYRIC BUTYRYL CHLORIDE n-caproic CHLORENDIC CHLOROACETIC o-chlorobenzoic Colour/Form rhombic crystals (<16.6 ºC melting point); colourless liquid (16.6 ºC melting point) colourless, very mobile, strongly refractive liquid monoclinic tablets or needle-like crystals Boiling Point (ºC) Melting Molecular Weight Solubility in Water Relative Density (water=1) Relative Vapour Density (air=1) Vapour Pressure/ (Kpa) Inflam. Limits misc ll 16 ul v sol 15 ºC ll 10.3 ul sl sol x 10-5 mm Hg colourless liquid misc ll 8 ul monoclinic prisms from sl sol ethyl acetate, water, or / ºC acetone and petroleum ether; fine white crystals or crystals (usually plates, sometimes needles, monoclinic system); white to slightly yellow crystals or monoclinic tablets, plates, leaflets; white scales or needle crystals v sol g/ ºC 15 ºC/4 ºC ºC 10 ll 15 mg/l ul oily liquid; colourless liquid misc mm Hg 2.0 ll 10.0 ul colourless liquid slowly with ºC/4 ºC oily liquid insol ll 9.3 ul crystalline monoclinic prisms; colourless or white crystals; colourless to light-brownish crystals monoclinic prisms from water 189 (alpha) 63 ; (beta) ; (gamma) v sol ºC sublimes sol x 10-4 mm Hg 8.0 ll? ul Flash 39 cc cc oc cc cc cc 443 < oc 380 Auto Ignition 126 >500
2 m-chlorobenzoic p-chlorobenzoic CHLOROPROPIONIC CITRIC CITRIC HYDRATE CROTONIC DICHLOROACETIC ,4- DICHLOROPHENOXY- ACETIC ,4- DICHLOROPHENOXY- PROPIONIC ETHANEDIOIC, DIHYDRATE ETHYLHEXANOIC FLUOROACETIC FORMIC FUMARIC crystals; prisms from water sublimes v sol /4 ºC triclinic prisms from alcohol and ether; nearly white coarse 8.475x 10-5 mm Hg insol 1.85x 10-3 mm Hg crystals misc crystals/monoclinic holohedra/crystallize from hot concentrated aq soln; colourless, translucent crystals or white, granular to fine crystalline / rhombic crystals from water with 1 mol of water of crystallization decomp v sol ll 2.29 ul crystals decomp 100 sol ll 2.29 ul 1010 monoclinic needles or v sol prisms (from water 15 ºC/4 ºC; petroleum ether); colourless 80 ºC/4 ºC crystals; white crystalline colourless liquid misc white to yellow crystalline ; yellow colour is phenolic impurities; colourless ; white colourless crystalline ; white to tan, crystalline 0.4 mm Hg insol ºC colourless crystals sublimes g/100 ml colourless liquid sol /4 ºC ll 6.0 ul needles; colourless crystals sol 36 ºC 1.9 mm Hg colourless liquid misc ll 34 ul needles, monoclinic 165 sublimes sl sol prisms or leaflets 1.7 mm Hg water; colourless crystals; white crystalline 88 oc 118 oc
3 GALLIC GLYCOLIC HEPTANOIC ISOBUTYRIC ISOPHTHALIC LACTIC LAURIC MALEIC MALEIC ANHYDRIDE MALONIC METHACRYLIC METHYL-4- CHLOROPHENOACETIC METHACRYLIC, 2- DIMETHYLAMINOETHYL NONANOIC OLEIC prisms from water; needles from absolute methanol or chloroform colourless crystals; rhombic needles from water; leaves from ethanol sl sol 6 ºC/4 ºC sol clear oily liquid sl sol 0.92 colourless liquid v sol mm 14.7 ºC needles sublimes sl sol colourless liquid or colourless crystals v sol >74 colourless ; white, insol mm Hg ºC monoclinic prisms from g/l water; white crystals from water, alcohol & benzene; colourless crystals orthorhombic needles from sol ll chloroform; 7.1 ul commercial grades in fused form, as briquettes; colourless needles or white lumps or pellets; needles from chloroform or ether white crystals decomp sol 1.63 liquid or colourless crystals; colourless liquid light brown ; plates from benzene or toluene; white crystalline (pure compd); colourless crystalline (pure) liquid sol /5 ºC colourless, oily liquid at ordinary temp; crystallizes when cooled; yellowish oil colourless or nearly colourless liquid (above 5-7 ºC); yellowish, oily liquid; water-white liquid sol sl sol Pa /15.5 º C insol mm Hg insol oc oc 363
4 OXALIC PALMITIC PHTHALIC PHTHALIC ANHYDRIDE PIVALIC PROPIONIC ANHYDRIDE PROPIONIC SALICYLIC STEARIC SUCCINIC SULPHANILIC TARTARIC TEREPHTHALIC p-tert BUTYLBENZOIC anhyd oxalic acid, crystallized from glacial acetic acid is orthorhombic, crystals being pyramidal or elongated octahedra; transparent, colourless crystals or white white crystalline scales; needles from alcohol sol 17 ºC /4 ºC 15 mm Hg insol 62 ºC/4 ºC 154 ºC crystals; plates from water decomp sl sol oc white, lustrous needles; colourless or pale yellow flakes; colourless needles; monoclinic or rhombic prisms; white needles from alcohol and benzene sl sol Pa 1.7 ll ul coloured crystals sl sol 50 ºC colourless liquid decomposes ll 9.5 ul colourless liquid; oily liquid misc ll 14.8 ul white, fine, needle-like sl sol ll crystals, or fluffy, white? ul crystalline ; needles in water; monoclinic prisms in alcohol monoclinic leaf from alcohol; white or slightly yellow, crystal masses or white minute monoclinic prisms; triclinic or monoclinic prisms rhombic plates or monoclinic crystals from water 15 mm Hg insol mm ºC sl sol /4 ºC sl sol /4 ºC needles; white crystals or insol 1.51 < needles from dilute alcohol insol 165.5
5 p-toluenesulphonic TRICHLOROACETIC ,4,5-TRICHLORO- PHENOXYACETIC TRIFLUOROACETIC TRIMELLITIC ANHYDRIDE VALERIC monoclinic leaflets or prisms; colourless crystals crystals; colourless; white v sol cc v sol 25 C/4 ºC 1 mm 51.0 ºC white ; light tan decomp insol 1.80 < 0.01 mpa colourless, fuming liquid sol crystals; colourless reacts 6.6 <0.01 colourless liquid sol oc ll 7 ul
technical information
CHEMICAL RESISTANCE TABLES Version: 19-08-10 ADD Resins and Chemicals (Pty) Ltd Distribute a comprehensive range of unsaturated polyester resins for chemical resistance applications. The resins recommended
More informationApplications / Compatibility Guide
Applications / Compatibility Guide Hunsworth Lane, Cleckheaton, West Yorkshire. BD19 3UJ Telephone: +44 1274 878787 Fax: +44 1274 862588 e.mail: smith@novussealing.com Website: www.novussealing.com If
More informationAssistant Lecturer. Sahar Mohammed Shakir Assistant Lecturer. Abdul Hafeedh Hameed Assistant Lecturer. Ali Basim
Assistant Lecturer Sahar Mohammed Shakir Assistant Lecturer Abdul Hafeedh Hameed Assistant Lecturer Ali Basim Solid organic cpd.s when isolated from organic reaction are impure; they are contaminated with
More informationDMR Srl Telefono:
Anti-Slip ANTI SLIP PRODUCT Product Specification SPECIFICATION Identification of the Product & the Company Product Name: Company Name: Anti-Slip Category - Glass Reinforced Plastic (GRP) safe access products
More informationChemical Resistance Table KPC Polypropylene
Scope and Field Application This document establishes a provisional classification of the chemical resistance of polypropylene with respect to about 180 fluids. It is intended to provide general guidelines
More informationImpact of Elemental Sulfur in Natural Gas
OIL & GAS Impact of Elemental Sulfur in Natural Gas Derek Robson, Martin J. Maple, Andrew P. Laughton 21 st July 2015 1 2015 SAFER, SMARTER, GREENER Elemental Sulfur What is it, Where is it Found? 1. Occurs
More informationProviding the highest quality products thus giving maximum satisfaction to all
CHEMICAL REAGENTS INTRODUCTION The laboratory reagents offered by Labscan, are characterized by the highest quality improved for over 60 years of the company existence. In order to provide high quality
More informationPossible Hazards for CHEM 105
Possible Hazards for CHEM 105 Marble chips 6M Hydrochloric acid 1M Hydrochloric acid Magnesium metal Manganese dioxide Hydrogen peroxide solution 6% Zinc metal Silver metal Copper metal Steel wool Magnesium
More informationADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES
1 ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES The main advantages and improvements in drainage networks that will be obtained by the use of PE MAGNUM pipes, in comparison to PVC pipes are: 1.
More informationPossible Hazards for CHEM 106
Possible Hazards for CHEM 106 Calcium nitrate Aqueous ammonia Sodium phosphate Cobalt nitrate Cobalt chloride Sodium hydroxide Ammonium chloride Acetic acid Ferric nitrate Nitric acid Lead chloride Copper
More informationChemical Resistance Table Polypropylene
Description: Polypropylene Chemical Resistance Table Polypropylene Introduction The table in this document summarises the data given in a number of polypropylene chemical resistance tables at present in
More informationCORROSION DATA GUIDE
CORROSION DATA GUIDE This guide was developed from general corrosion literature, standard references and field experiences. Recommendations for corrosive service are given to assist the user in making
More informationOcal. PVC-Coated Products. Products for corrosive environments
Ocal TM Products for corrosive environments Polymeric Fixtures for Class I, Zone 2, Groups IIC, IIB, IIA, Wet and Marine Locations Hazlux 1 HID, Mogul Base, 50-175W Enclosed and gasketed Polymeric (fiberglass-reinforced
More informationPreferred. Steel, Epoxy Powder Coated. Satisfactory. Limited
Corrosion Resistance We manufactures enclosures from a wide range of materials, offering varying degrees of resistance against chemical corrosion. All materials are affected by corrosion in some manner.
More informationMATERIAL SAFETY DATA SHEET STEARIC ACID MSDS
MATERIAL SAFETY DATA SHEET STEARIC ACID MSDS 1: Chemical Product and Company Identification Product Name: Stearic acid Catalogue Codes: SLS2320, SLS3742 CAS#: 57-11-4 RTECS: WI2800000 TSCA: TSCA 8(b) inventory:
More informationEXPERIMENT 3: Identification of a Substance by Physical Properties
EXPERIMENT 3: Identification of a Substance by Physical Properties Materials: Hot plate Digital balance Capillary tubes (3) Thermometer Beakers (250 ml) Watch glass Graduated Cylinder (10 ml) Mel-Temp
More informationIndustrial Fiberglass Specialties, Inc. 521 Kiser Street Dayton, OH Tel: Fax:
08-13-2003 Page #1 of 13 Temperature ( o F) for Acetaldehyde --- 100 100 Acetic Acid #10 150 150 Acetic Acid 10-100 CM CM Acetic Anhydride --- 100 120 Acetone --- 120 120 Acetonitrile --- 120 120 Acetophonone
More informationSPECIFICATIONS & TEST PROCEDURES ASPIRIN USP. Molecular Weight : Reference : USP 39
Page 1 of 18 Molecular Formula : C 9 H 8 O 4 CAS Registry No. : [50 78 2] Molecular Weight : 180.16 Reference : USP 39 Other Names : Benzoic acid, 2 - (acetyloxy) - Salicylic acid acetate, Acetyl salicylic
More information(12) Patent Application Publication (10) Pub. No.: US 2006/ A1
(19) United States US 20060289839A1 (12) Patent Application Publication (10) Pub. No.: US 2006/0289839 A1 Emmerson et al. (43) Pub. Date: (54) METAL SALTS OF ORGANIC ACIDS AS CONDUCTIVITY PROMOTERS (76)
More informationAtlas Minerals & Chemicals, Inc. FURATHANE MORTAR. 5-33PI ( ) Supersedes 5-33PI (7-02) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA A SHEET 5-33PI (6-03 2 ) Supersedes 5-33PI (7-02) FURATHANE MORTAR DESCRIPTION FURATHANE MORTAR is a 100% carbon filled, specially formulated furan mortar for chemical
More informationBioproducts as Early-Stage Technology Opportunities for Industry and Investors. Peter L Keeling Iowa State University
Bioproducts as Early-Stage Technology Opportunities for Industry and Investors Peter L Keeling Iowa State University NSF Engineering Research Center CBiRC Biomass Feedstock Biobased Chemicals Members -
More informationPE300 Rod Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
More informationChemical resistance of Saniclad PVC products
resistance of Saniclad PVC products The table that appears in the following pages lists the resistance of SAI CLAD PVC sheets to a number of commonly encountered chemicals and other corrosive media at
More informationRYTON (PPS) Chemical Compatibility & Chemical Resistance Chart
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart Explanation of Footnotes 1. Satisfactory to 72 F (22 C) 2. Satisfactory to 120 F (48 C) Ratings -- Chemical Effect A = Excellent. B = Good
More informationPPH Rod Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: Polypropylene Homopolymer PPH is light weight (SG 0.91) has improved chemicalresistance, stiffness, improved higher working temperature compared to PPC (0 C to
More informationTechnical data sheet
Technical data sheet 8 64 mm 1. Manufacturer Egli, Fischer & Co. Ltd. Gotthardstrasse 6 P.O. Box 8022 Zurich Switzerland 2. Product description One-piece, self locking plastic pipe clamp for the exterior
More informationPE300 Profiles Extruded
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
More informationValidation Guide. GBPES-series 0.2, 0.45, & 0.65 Micron Membrane Elements F517A_160901
Validation Guide GBPES-series 0.2, 0.45, & 0.65 Micron Membrane Elements F517A_160901 Table of Contents I. Technical Specifications... 3 1. Mechanism of Filtration... 3 2. Pore Size... 3 3. Materials of
More informationLDPE Sheet Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: Low Density Polyethylene LDPE is a lightweight material (SG 0.92) with low water absorption and good chemical resistance. LDPE is renowned for its low stiffness
More informationPlastic pipe clamp CLIC TOP 8 64
Plastic pipe clamp CLIC TOP 8 64 Technical data sheet 12/2014 1 1. Product description The most efficient mounting system for pipes, cables and many other applications. Diameter dimensions ranging from
More informationPolypropylene Chemical Resistance Table Polypropylene
ART 006 11.07.2001 Ed. 4 Introduction The table in this document summarises the data given in a number of polypropylene chemical resistance tables at present in use in various countries, derived from both
More informationSupporting Information. Crystalline Polymorph Selection and Discovery with Polymer Heteronuclei
Supporting Information Crystalline Polymorph Selection and Discovery with Polymer Heteronuclei Christopher P. Price, Adam L. Grzesiak and Adam J. Matzger* Department of Chemistry and the Macromolecular
More informationPE300 Sheet Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
More informationProduct Shelf Life/Expiration Date Policy
Acetic Acid 99.7% Glass and Polyethylene 24 Acetic Acid Dilutions Glass and Polyethylene 24 Acetone >99.5% Polyethylene 36 Acetone >99.5% Metal 12 Acetone 85% / IPA 15% Blend Polyethylene 18 Ammonium Chloride
More informationChapter 4: Recrystallization & Melting Point
Chapter 4: Recrystallization & Melting Point Recrystallization A purification technique for impure solid compounds A several-step process Can be on on a microscale or macroscale Melting Point Verifies
More informationChapter 6. Multiphase Systems. Dr. M. A. A. Shoukat Choudhury Website:
Chapter 6 Multiphase Systems Dr. M. A. A. Shoukat Choudhury Email: shoukat@buet.ac.bd Website: http://teacher.buet.ac.bd/shoukat/ Multiphase Systems Why Study? - Phase change operations such as freezing,
More informationTemperature Sensing Standard Thermowells for Industrial Applications. Velocity Ratings of Wells. View Product
Standard for Industrial Applications Well failures, in most cases, are not due to the effects of pressure and temperature. The calculations necessary to provide adequate strength under given conditions
More informationPPH Pressed and Planed Sheet
Product information Product full identity: Polypropylene Homopolymer PPH is light weight (SG 0.91) has improved chemicalresistance, stiffness, improved higher working temperature compared to PPC (0 C to
More informationTHIONYLDIACETIC ACID 1
THIONYLDIACETIC ACID 1 HAROLD G. ODDY AND VANCE H. DODSON, 2 Department of Chemistry, University of Toledo, Toledo, Ohio INTRODUCTION Thionyldiacetic (thionydiglycolic) acid can be classified as a sulfoxide,
More informationChemistry 2633 Techniques of Organic Chemistry James S Chickos Department of Chemistry and Biochemistry University of Missouri-St.
Chemistry 2633 Techniques of rganic Chemistry James S Chickos Department of Chemistry and Biochemistry University of Missouri-St. Louis Louis M 63121 E-mail: jsc@umsl.edu Teaching Assistants: Tues 12:30-5:00:
More informationChanges for Organic Chemistry 2521 Labs
Changes for Organic Chemistry 2521 Labs Chapter 3 Crystallization Part 1 (Starts on page 56) Test the solubility of three compounds with three solvents. There are four compounds to choose from: 1. Resorcinol
More informationGrilamid TR 55 LY EMS-GRIVORY a unit of EMS-CHEMIE AG
Product Texts Product designation according to ISO 1874: PA 12/MACMI + PA 12, GHLT, 14-020 Mechanical properties dry / cond Unit Test Standard Tensile Modulus - / 1900 MPa ISO 527-1/-2 Yield stress - /
More informationPE500 Sheet Pressed & Planed
Product information Product full identity: High Molecular Weight Polyethylene PE500 is a versatile, food compliant material available in a wide range of colours. It s unique properties include a low coefficient
More informationChapter No. 2 EXPERIMENTAL TECHNIQUES IN CHEMISTRY LONG QUESTIONS Analytical Chemistry: The science of chemical characterization is called analytical chemistry. OR The branch of chemistry which deals with
More informationPhysiologically Active Crystalline Esters of Vitamin A. (Institute of Physical and Chemical Research, Komagome, Tokyo.)
(1) F. W. Heyl: J. Amer, Chem. Soc., 41, 670 (1919). (2)"J. Amer. Pharm. Assoc., 12, 669 (1923). (3) R. J. Anderson & W. L. Kulp: J. Biol. Chem., 50, 433 (1922). (4) A. Kiesel Z. physiol. Chem., 120, 85
More informationAtlas Minerals & Chemicals, Inc. CHEMESTER MORTAR. 5-42PI ( ) Supersedes 5-42PI (2-02) & 5-44PI (2-02) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA A SHEET 5-42PI (6-03 2 ) Supersedes 5-42PI (2-02) & 5-44PI (2-02) CHEMESTER MORTAR DESCRIPTION CHEMESTER MORTAR is an epoxy novolac based vinyl ester resin mortar
More informationKTR is delivered in 25 kg multi-ply paper bag. One pallet contains 900 kgs 36 bags. One 20 ft. container contains 18 metric tons.
STRUCTURAL FORMULA CAS Number - 25054-06-2 Trade Names - KTR-80, KTR-100, KTR-118, KTR-123 Chemical Name - CYCLOHEXANONE-FORMALDEHYDE RESIN 1. GENERAL DESCRIPTION Ketonic Resins (KTR) dissolve readily
More informationINDIAN SCHOOL MUSCAT SENIOR SECTION DEPARTMENT OF CHEMISTRY CLASS X- PRACTICAL WORKSHEET
INDIAN SCHOOL MUSCAT SENIOR SECTION DEPARTMENT OF CHEMISTRY CLASS X- PRACTICAL WORKSHEET Different types of chemical reactions Experiment No: 1(a) Combination reaction Objectives: To study the Combination
More informationCrystallization & Filtration
Crystallization & Filtration Purification of Salicyclic Acid and Sodium Chloride Separation processes Liquid-liquid extraction Adsorption Filtration Solid-liquid extraction (leaching) Elution chromatography
More informationDATA SHEET. Atlas Minerals & Chemicals, Inc. REZKLAD SR MORTAR / REZKLAD SR-C MORTAR. 5-37PI ( ) Supersedes 5-37PI (9-95) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA SHEET 5-37PI (3-97 2 ) Supersedes 5-37PI (9-95) REZKLAD SR MORTAR / REZKLAD SR-C MORTAR DESCRIPTION solvent free, high performance, acid and solvent resistant mortars
More informationRECRYSTALLIZATION, FILTRATION AND MELTING POINT
RECRYSTALLIZATIN, FILTRATIN AND MELTING PINT Recrystallization is one of the main purification methods for solid compounds on virtually any scale, from mg to kg to tons. From the experimental point of
More informationDionex IonPac ICE-AS1 Analytical Column
User Manual Dionex IonPac ICE-AS1 Analytical Column 031181 Revision 07 March 2017 For Research Use Only. Not for use in diagnostic procedures. Product Manual for Dionex IonPac ICE-AS1 Analytical Column
More informationBenzaldehyde Thiosemicarbazones. Author(s) Sugii, Michiyasu; Okabayashi, Ichiz.
Studies on Antituberculous Compound TitleDisubstituted Benzoic Acids and 2, Benzaldehyde Thiosemicarbazones Author(s) Sugii, Michiyasu; Okabayashi, Ichiz Citation Bulletin of the Institute for Chemi University
More informationPRODUCT DATA SHEET PDS A133_E. Metric thread M 1.5 pitch CEI EN CEI EN Pg thread DIN Dimensions DIN
Metric thread M 1.5 pitch CEI EN 60423 CEI EN 50262 Ref. Hole min-max Spanner Spanner min-max Quantity Nickel Head Body Box/Bag Plated Brass 2003M1221N M12x1,5 12,5 4-6 13 14 5 13-16 500/100 2003M1621N
More information9. PHOSPHORUS 563. Formula weight Very gradually evolves free I a with KI.
9. PHOSPHORUS 563 A solution of 302.2 g. of KH 3 PO 4, 198 g. of KOH, 120 g. of KF and 0.355 g. of K 3 CrO 4 in one liter of water is prepared. A 215-ml. portion of this solution is electrolyzed in a large
More informationWE ARE A TRUE PARTNER FOR YOUR SUCCESS
WE ARE A TRUE PARTNER FOR YOUR SUCCESS DONIT Tesnit Sealing technologies As a leader in gaskets, gasket sheets, and advanced sealing technologies, DONIT Tesnit offers the optimum solution with a perfect
More informationChemical Resistance-VF 105
Chemical Resistance-VF 105 1= Suitable for constant immersion, constant flow, and/or areas with frequent spills and/or poor drainage. 2 = Suitable for at least 72 hours of containment and for intermittent
More informationTECHNICAL INFORMATION
Applicable Standards 900 Series AASHTO H-20 or HS-20 AASHTO M306-07 modified 9"x 9" load plate replaced with 18" long x 4" diameter steel rod ASTM A536 Class 65-45-12 CALTRANS Section 10-1.35, "Grated
More informationSULPHUR DYES AND SULPHURISED VAT DYES
SULPHUR DYES AND SULPHURISED VAT DYES Part II. Constitution of Cibanone Yellow R Part I BY K. H. SHAH, B. D. TILAK AND K. VENKATARAMAN, F.A.Sc. (Department of Chemical Technology, University of Bombay)
More informationGrilamid TR 55 EMS-GRIVORY a unit of EMS-CHEMIE AG
Product Texts Product designation according to ISO 1874: PA 12/MACMI, GT, 11-020 Mechanical properties dry / cond Unit Test Standard Tensile Modulus 2200 / 2200 MPa ISO 527-1/-2 Yield stress 75 / 75 MPa
More informationWE ARE A TRUE PARTNER FOR YOUR SUCCESS
WE ARE A TRUE PARTNER FOR YOUR SUCCESS DONIT Sealing technologies As a leader in gaskets, gasket sheets, and advanced sealing technologies, we offer the optimum solution with a perfect fit for your most
More information1. PURPOSE This exercise examines some of the different plastics readily made in a laboratory setting and properties of some commercial plastics.
CIP1 PLASTICS Last Revised: February 2014 1. PURPOSE This exercise examines some of the different plastics readily made in a laboratory setting and properties of some commercial plastics. 2. REAGENTS &
More informationSurface drainage systems introduction. Area (m2) Fig. 4 31,5 28,5 25,5 22,5 19,5 16,5 13,5 10,5 7,5 4,5 1,5
31,5 30 125 mm/hours 100 mm/hours 75 mm/hours 28,5 27 25,5 24 22,5 50 mm/hours 40 mm/hours 21 19,5 18 16,5 15 13,5 12 7. catch BaSinS covers GrillS 8. rainwater GullieS Area (m2) Total discharge qt (l/sec)
More informationProperties of standard Bal Spring canted coil spring materials
Custom components that drive tomorrow s technologies. Properties standard Bal Spring canted coil spring materials Technical Report TR-9 (Rev. Q; 10-19-17) (100-44) 19650 Pauling Foothill Ranch, CA USA
More informationNitration of Substituted Aromatic Rings and Rate Analysis
Nitration of Substituted Aromatic Rings and Rate Analysis Abstract Kayla Diemoz Dr. Valerie Burke September 13, 2010 This project studied the electrophilic aromatic nitration of many monosubstitued aromatic
More informationindicates possibility of environmental stress cracking
CHEMCAL RESSTANCE CHART This Resistance chart is to be used as a guide to assist you in determining the suitability of LLDPE Rotathene for storing the chemical indicated. Storage is a critical application
More informationPlastic Extruders Limited Russell Gardens, Wickford, Essex,SS11 8DN England. TEL: +44 (0) FAX: +44 (0)
Plastic Extruders Limited Russell Gardens, Wickford, Essex,SS11 8DN England. TEL: +44 (0)1268 571116 FAX: +44 (0)1268 560027 sales@plastex.co.uk THE CHEMICAL RESISTANCE OF P.V.C. November 2003 Introduction
More informationCH241 Experiment #1 (Weeks of September 11, 18, and 25, 2017)
CH241 Experiment #1 (Weeks of September 11, 18, and 25, 2017) SEPARATION AND RECOVERY OF ORGANIC COMPOUNDS, THIN LAYER CHROMATOGRAPHY, COLUMN CHROMATOGRAPHY, CRYSTALLIZATION, AND MELTING POINTS Overview
More informationBY K. J. BALAKRISHNA, P. BHASKARA RAMA MURTI AND T. R. SESHADRI (From the Department of Chemistry, Andhra University) Received ]uly 16, 1945
CHEMICAL COMPOSITION OF CALOTROPIS GIGANTEA Part IV. The Resinols of the Root Bark BY K. J. BALAKRISHNA, P. BHASKARA RAMA MURTI AND T. R. SESHADRI (From the Department of Chemistry, Andhra University)
More information(3) The compound boron nitride (BN) has a high melting point (2967 ºC), high density, and is very hard. What is the best classification of this solid?
Solids and Liquids Name: Period: (1) Identify the type of solid formed by each compound. (a) Ag (b) CO 2 (c) SiO 2 (d) wax (e) MgCl 2 (f) Fe (g) graphite (h) SO 2 (i) CaCO 3 (j) I 2 (k) rubber (l) SiC
More informationDiaphragm Liquid Pumps
Diaphragm Liquid Pumps Series 52 F F 12 FP 21 52 F F 12 FP 21 Product Features Self priming Dry running Oil-less, non lubricated Suitable for continuous operation (motor shaft should be horizontal) Chemical
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS SeamTek Type 4 Epoxy Quartz Flooring System (1/8 ) Section 09700 800-638-9874 www.lspinc.com Part 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract,
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 800-638-9874 www.lspinc.com Part 1 - GENERAL SeamTek Type 3 Healthcare Epoxy Quartz Flooring System (3/16 ) Section 09700 1.01 RELATED DOCUMENTS A. Drawings and general provisions
More informationTECHNICAL SPECIFICATIONS
Part 1 - GENERAL TECHNICAL SPECIFICATIONS SeamTek Type 3 Epoxy Quartz Flooring System (3/16 ) Section 09700 800-638-9874 www lspinc com 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract,
More informationMAHESH TUTORIALS I.C.S.E.
ICSE X MAES TUTORIALS I.C.S.E. Marks : 80 Exam No. : MT/ICSE/I SPA 033SUBJECT : CEMISTRY Time : 2 hrs. Topics : Sulphuric acid, Ammonia, Analytical Chemistry, Organic Chemistry Cl, Nitric acid, Metallurgy
More informationCHEMISTRY. SECTION I (40 Marks) Attempt all questions from this Section
CEMISTRY SCIENCE Paper 2 (One hour and a half) Answers to this Paper must be written on the paper provided separately. You will not be allowed to write during the first 15 minutes. This time is to be spent
More informationcolumns IonPac ICE-AS1 Ion-Exclusion Column Superior Chromatographic Performance Separates weakly ionized acids by differences in pk a
columns IonPac ICE-AS Ion-Exclusion Column The IonPac ICE-AS ion-exclusion column provides fast analysis of aliphatic organic acids and alcohols in complex- or high-ionic strength samples using a moderately
More informationDATA SHEET. Atlas Minerals & Chemicals, Inc. ATLASTACRETE E / ATLASTACRETE E LT. 8-21PI (5-14) Supersedes 8-21PI ( ) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA SHEET 8-21PI (5-14) Supersedes 8-21PI (12-02 3 ) ATLASTACRETE E / ATLASTACRETE E LT DESCRIPTION AND TYPICAL USES ATLASTACRETE E and ATLASTACRETE E LT are epoxy resin
More informationW A T L O W. Application. Over 704 C (1300 F) Carburizing hardening. Inconel 600, Type 446 SS. Hot blast main Inconel 600 Stove trunk Inconel 600
Inconel and Monel are registered trademarks of the Special Metals Corporation. Hexoloy is a registered trademark of Carborundum Company. Hastelloy C is a registered trademark of Haynes International. Heat
More informationEC Duro-Bond Rubber Sheet Linings
EC Duro-Bond Rubber Sheet Linings Description Both Soft Natural Rubber and Hard Natural Rubber Linings are offered by Electro Chemical. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180
More information3. What is the limiting reagent in the following base catalyzed reaction if you begin with 2.05 ml of butanal and 2.15 ml of benzaldehyde?
Version B 1. You carry out a reaction to synthesize 2,4-dinitrobenzaldehyde. It has a literature melting point value of 68-69 o C, and the melting point of the material you recover was found to be 65-68
More informationSurface Protective Systems
Surface Protective Systems Technical information TI 374 Expansion joint filler, especially suitable for the corrosion protection Base Polyurethane Material Group Mortars, Jointing Materials Description
More informationURBANA. LL'ffO'S STATE GEOLOGICAL SURVEY
t URBANA LL'ffO'S STATE GEOLOGICAL SURVEY 3 3051 00003 5240 Digitized by the Internet Archive in 2012 with funding from University of Illinois Urbana-Champaign http://archive.org/details/aromaticfluorine115fing
More informationPolystone G (HDPE) Polystone P (Polypropylene) Shaping the Future through Innovation.
Polystone G (HDPE) Polystone P (Polypropylene) Shaping the Future through Innovation. Innovation. 11/2011 Competence. Quality. Semi-Finished Thermoplastics Röchling A World Leader in Engineering Plastics
More informationFOR THE HIGHEST STANDARDS IN METAL REPLACEMENT
TEREZ GT3 GT3X FOR THE HIGHEST STANDARDS IN METAL REPLACEMENT www.terplastics.com www.tergroup.com TEREZ GT3 GT3X Unmatched in stiffness, strength and flowability The subject of metal replacement already
More informationDuPont Zytel 103FHS NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDiaphragm Liquid Pumps
Diaphragm Liquid Pumps MODELS 52 F F 12 FP 21 52 F F 12 FP 21 FEATURES Self priming Dry running Oil-less, non lubricated Suitable for continuous operation Chemical resistent pump materials for aggressive
More informationPerfection in Liquid Handling HIGHEST RELIABILITY IN DISPENSING
Perfection in Liquid Handling HIGHEST RELIABILITY IN DISPENSING 13 VITLAB Dispenser line: genius 2, simplex 2, and TA 2 VITLAB genius 2 and simplex 2 bottle-top dispensers are a family of instruments with
More informationCHEMISTRY FALL 2005 MSDS
CHEMISTRY FALL 2005 Aluminum 1.5 kg Aluminum chloride, anhydrous, 98.5% 0.2 kg Aluminum chloride 6H 2 O 0.5 kg Aluminum hydroxide 0.5 kg Aluminum nitrate 0.5 kg Aluminum sulfate 0.5 kg Ammonia, concentrated
More informationGRADE: 10 CHEMISTRY MCQ (TERM-1)
GRADE: 10 CHEMISTRY MCQ (TERM-1) 1 When ferrous sulphate crystals are heated, the colour of the residue formed is : (a) red (b) brown (c) orange (d) green. 2 A small amount of quick lime is taken in a
More informationExperiment 2. Recrystallization: The Purification of Crystalline Organic Compounds
Experiment 2 Recrystallization: The Purification of Crystalline Organic Compounds The method selected for purifying a given organic compound depends on a number of factors such as the physical state of
More informationAnnexure I LIST OF PRODUCTS TO BE MANUFACTURED
Sr. No. Annexure I LIST OF PRODUCTS TO BE MANUFACTURED Name Of Product Proposed Quantity (MT/Month) 01 Allyl iso thiocynate 5.0 02 Benzhydrol 5.0 03 4-methyl cyclohexanol 5.0 04 4- methyl cyclohexanone
More informationDuPont Zytel 73G30L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More information2005 Synthesis of the acetonide of meso-1,2-diphenyl-1,2- ethanediol (2,2-dimethyl-4,5-diphenyl-1,3-dioxolane)
2005 Synthesis of the acetonide of meso-1,2-diphenyl-1,2- ethanediol (2,2-dimethyl-4,5-diphenyl-1,3-dioxolane) Ph H H H H Ph + H 3 C CH 3 - H 2 FeCl 3 H Ph H Ph H 3 C CH 3 C 14 H 14 2 (214.3) C 3 H 6 (58.1)
More informationmaterial chemical Note ) This data is subject to change for update of specifications and availability of newer formation.
Note: The following tables are intended to serve only as your reference of s, and are not intended to using s, please exercise your own judgment based on the verification with your real machine. For s
More informationEnvironmental Health and Safety at Alfred University. Identifying A Hazardous Waste
Environmental Health and Safety at Alfred University Identifying A Hazardous Waste What is a Hazardous Waste? A waste is basically any discarded material. By law hazardous waste is defined as a waste,
More information2. Crystallization. A. Background
2. Crystallization A. Background Crystallization is one of several available techniques available to purify organic compounds. Unlike other techniques, however, crystallization is specific to the purification
More informationDuPont Zytel 70G35HSLRA4 BK267
DuPont Zytel 70G35HSLRA4 K267 Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance
More informationGrilon TSG-30/4 EMS-GRIVORY a unit of EMS-CHEMIE AG
Product Texts Product designation according to ISO 1874: PA 66+PA 6, MHR, 14-100 N, GF30 Mechanical properties dry / cond Unit Test Standard Tensile Modulus 9700 / 6000 MPa ISO 527-1/-2 Stress at break
More information