Dynex separating & grinding discs. Extremely flexible. Unexpectedly fast.
|
|
- Harry Cecil Sutton
- 5 years ago
- Views:
Transcription
1 Dynex separating & grinding discs Extremely flexible. Unexpectedly fast.
2 Dynex separating & grinding discs 20 Ceramic Titanium Precious metal alloys Precious & non-precious metal alloys mm 0,2 0,25 0,3 2
3 Flexible, fast and reliable Flexibility for grinding dental materials such as ceramics, precious metal alloys and non-precious metal alloys, model casting alloys, acrylics and titanium alloys. Fast as a result of the excellent cutting and grinding performance, with maximum precision, minimal loss of material, and long service life. Reliable during grinding on account of the very low vibrations and the outstanding flexibility afforded by glass fiber reinforcement for dental materials. Non-precious & model casting alloys 0,4 0,5 0,7 1,0 3
4 Ceramic Extremely thin and flexible diamond grinding and separating discs with glass fiber reinforcement. Created for separating and trimming porcelain, zircon oxide and lithium disilicate. Dynex Brillant 20 x 0,2 mm Extremely thin and flexible for precise separation of interdental spaces and gentle trimming work. Quick and reliable separation of press sprues. Extreme combination of thin and flexible disc. Mike Dominguez Kymata Dental Arts Seattle USA Despruing IPS e.max with the Dynex wheel is super quick and produces little heat. I also use this dynamic wheel for incisal cut backs on IPS e.max CAD as well. Dynex Brillant 20 x 0,25 mm Extremely thin and flexible for precise separation of interdental spaces and grinding flat surfaces. Quick and reliable separation of press sprues. Ideal combination of flexibility and rigidity. Dynex Brillant 20 x 0,3 mm Flexible and at the same time robust for precise work. Quick and reliable separating of press sprues. Very good combination of flexibility and robustness. Titanium alloys Extremely flexible and robust glass fiber reinforced separating and grinding discs especially created for separating and grinding titanium and titanium alloys, implant super structures such as abutments, bars and frameworks. Dynex Titanium 22 x 0,3 mm Ideal for cutting and grinding thin areas and small parts of the restoration. Flexible and robust for quick and precise grinding of implant super structures. Dynex Titanium 26 x 0,3 mm Ideal for cutting and grinding solid areas and larger parts of the restoration. Flexible and robust for quick and precise grinding of implant super structures. Longer service life due to a larger diameter. 4
5 Precious & non-precious alloys Extremely thin and flexible glass fiber reinforced separating and grinding discs, especially made for cutting and grinding precious metal alloys. Dynex 22 x 0,2 mm Ideal for separating and grinding thin sprues (< 3 mm) and small areas of a restoration. The least material loss when separating and finishing precious metal alloys. Dynex 22 x 0,25 mm Ideal for separating and grinding medium sized sprues (< 3.5 mm) and small areas of a restoration. Low material loss when separating and finishing precious metal allos. Dynex 26 x 0,25 mm Ideal for separating and grinding medium sized sprues (< 3.5 mm) and larger areas of a restoration. Low material loss when separating and finishing precious metal alloy units. Longer service life due to a larger diameter. Very flexible and robust glass fiber reinforced separating and grinding discs, especially made for cutting and grinding precious and non-precious metal alloys, as well as acrylic. Christoph Zobler, Max Wörishofer, Harald Gritsch, INN-KERAMIK, Innsbruck, Austria The Renfert separating discs have made a great impression on us on account of the high level of flexibility, the wide range of possible applications, and the long service life. These separating discs are a great help to us in our routine laboratory work, since we are able to grind all types of materials such as titanium or lithium disilicate. We have been impressed by the degree of versatility, compared to the separating discs we previously used, and by the resulting economies. Dynex 22 x 0,3 mm Ideal for separating and grinding thick sprues (< 5 mm) and small areas of a restoration. Low material loss when separating and finishing precious metal alloy units. Dynex 26 x 0,3 mm Ideal for separating and grinding thick sprues (< 5 mm) and larger areas of a restoration. Low material loss when separating and finishing precious metal alloy units. Longer service life than the Dynex due to a larger diameter of 22 mm. 5
6 Non-precious & model casting alloys Very flexible and robust glass fiber reinforced separating and grinding discs, especially made for cutting and grinding non-precious metal alloys. Dynex 22 x 0,4 mm Ideal for separating thick sprues (< 5 mm) and grinding small areas such as shap correction. Flexible and robust, even when under extreme strain such as during lateral pressure. Dynex 22 x 0,5 mm Ideal for separating thick sprues (< 5 mm) and grinding small areas such as shape correction. Robust, even when under extreme strain such as lateral pressure. Dynex 26 x 0,4 mm Ideal for separating thick sprues (< 5 mm) and grinding larger areas on a restoration. Flexible and robust, even when under extreme strain such as lateral pressure. Longer service life due to a larger diameter. Dynex 26 x 0,5 mm Ideal for separating thick sprues (< 5 mm) and grinding larger areas on a restoration. Robust, even when under extreme strain such as lateral pressure. Longer service life due to a larger diameter. Noelia Heras, Esthetic Lab Zaragoza Spain We use the separating disk with less than 20,000 rpm and experience very good durability and stability. It is wear-resistant and generates little heat. Very robust, glass fiber reinforced separating and grinding discs, especially made for separating, cutting and grinding non-precious metal and model casting alloys. Dynex 22 x 0,7 mm Ideal for separating and grinding small areas such as shape correction. Very robust, even when under extreme strain such as lateral pressure and high rpm. Dynex 22 x 1,0 mm Ideal for separating and grinding small areas such as shape correction. Extremely robust, even when under extreme strain such as lateral pressure and high rpm. Dynex 26 x 0,7 mm Ideal for separating and grinding larger areas on a restoration. Very robust, even when under extreme strain such as lateral pressure. Longer service life due to a larger diameter. Dynex 26 x 1,0 mm Ideal for separating and grinding larger areas on a restoration. Extremely robust, even when under extreme strain such as lateral pressure. Longer service life due to a larger diameter. 6
7 Ihssan Hamadeh Laboratory owner Damascus Syria Renfert stands for quality, which is part of my life and of my success. The Dynex separating disk makes my work much easier. Thanks to the high quality, the long service life and flexibility, I am able to reach my goals easily and reliably. Extremely robust glass fiber reinforced separating and grinding discs, especially made for model casting alloys, non-precious metal alloys and for cutting through press ceramic investment rings. Dynex 40 x 0,4 mm Ideal for separating solid sprues and grinding larger areas on a restoration. Thin, flexible and at the same time robust, even under extreme strain such as cutting through very thick sprues. Dynex 40 x 0,5 mm Ideal for separating solid sprues and grinding larger areas on a restoration. Robust, even when under extreme strain such as cutting through thick sprues. Low-vibration cutting of press ceramic investment rings. Dynex 40 x 0,7 mm Ideal for separating solid sprues, processing model casting alloys and grinding larger areas on a restoration. Very robust, even when under extreme strain such as cutting through thick sprues. Only gentle pressure required. Low-vibration cutting of press ceramic investment rings. Dynex 40 x 1,0 mm Extremely long service life due to the very large diameter and the 1mm thickness of the separating disc. Only gentle pressure required during processing. Low-vibration cutting of press ceramic investment rings. Luigi de Stefano Luigi de Stefano & C. S.N.C Scafati Italy This separating disc has facilitated and optimized our everyday work. The materials are ground gently, and this stable and durable separating disc can be guided with good control. 7
8 Technical details and ordering information Application Art. No. Description Diameter Thickness Pieces Recommended rpm Max. rpm Min. Ø mandrel Ceramic Dynex Brillant 20 mm 0.20 mm 10 15,000 1/min. 50,000 1/min. 5 mm Ceramic Dynex Brillant 20 mm 0.25 mm 10 15,000 1/min. 50,000 1/min. 5 mm Ceramic Dynex Brillant 20 mm 0.30 mm 10 15,000 1/min. 50,000 1/min. 5 mm Titanium Dynex Titanium 22 mm 0.30 mm 20 15,000 1/min. 50,000 1/min. 5 mm Titanium Dynex Titanium 26 mm 0.30 mm 20 15,000 1/min. 50,000 1/min. 5 mm Precious metal Dynex 22 mm 0.20 mm 20 15,000 1/min. 50,000 1/min. 5 mm Precious metal Dynex 22 mm 0.25 mm 20 15,000 1/min. 50,000 1/min. 5 mm Precious metal Dynex 26 mm 0.25 mm 20 20,000 1/min. 50,000 1/min. 5 mm Precious + non-precious metal Dynex 22 mm 0.30 mm 20 20,000 1/min. 50,000 1/min. 5 mm Precious + non-precious metal Dynex 26 mm 0.30 mm 20 15,000 1/min. 50,000 1/min. 5 mm Non-precious metal Dynex 22 mm 0.40 mm 20 15,000 1/min. 50,000 1/min. 5 mm Non-precious metal Dynex 22 mm 0.50 mm 20 20,000 1/min. 50,000 1/min. 5 mm Non-precious metal Dynex 26 mm 0.40 mm 20 15,000 1/min. 50,000 1/min. 5 mm Non-precious metal Dynex 26 mm 0.50 mm 20 15,000 1/min. 50,000 1/min. 5 mm Non-precious metal + model casting Dynex 22 mm 0.70 mm 20 15,000 1/min. 50,000 1/min. 5 mm Non-precious metal + model casting Dynex 22 mm 1.00 mm 25 20,000 1/min. 50,000 1/min. 5 mm Non-precious metal + model casting Dynex 26 mm 0.70 mm 20 15,000 1/min. 50,000 1/min. 5 mm Non-precious metal + model casting Dynex 26 mm 1.00 mm 20 15,000 1/min. 50,000 1/min. 5 mm Non-precious metal + model casting Dynex 40 mm 0.40 mm 20 15,000 1/min. 38,000 1/min. 8 mm Non-precious metal + model casting Dynex 40 mm 0.50 mm 20 15,000 1/min. 38,000 1/min. 8 mm Non-precious metal + model casting Dynex 40 mm 0.70 mm 20 15,000 1/min. 38,000 1/min. 8 mm Non-precious metal + model casting Dynex 40 mm 1.00 mm 20 15,000 1/min. 38,000 1/min. 8 mm You will find detailed information at our web site. Follow us on Facebook, Twitter and YouTube. Our blog contains interesting topics on dental technology A
The right milling option High precision and productivity. all ceramic all options. The innovative milling system. approved for
all ceramic all options The innovative milling system Zenostar Telio CAD for Zenotec IPS e.matrix with IPS e.max CAD for Zenotec The right milling option High precision and productivity approved for Customized
More informationall digital all options The compact milling system Your entrance into the digital world
all digital all options The compact milling system Your entrance into the digital world Customized digital solutions for every laboratory Preparing Scanners and Software Material Selection Milling Finishing
More informationall digital all options The innovative milling system The right milling option High precision and productivity
all digital all options The innovative milling system The right milling option High precision and productivity Customized digital solutions for every laboratory Preparation Scanners and Software Material
More informationSpecialist for zirconia preparation
jota Specialist for zirconia preparation Special products for processing zirconia Many years of experience in the field of rotary instruments A one-stop supplier - complete assortment including special
More informationProduct Mineral Type Features Metal Type Perform. Grinding Light Grinding Blending Deburring. All Metals Premium. Stainless Steel and Aluminum.
provide a fast, efficient method for grinding, blending, leveling and finishing on all types of metal. They lock securely in place with just a half twist another half twist and they re off. Each disc is
More informationALL-CERAMIC MATERIALS
ALL-CERAMIC MATERIALS The Comprehensive Guide R-Dent Dental Laboratory 7490 Bartlett Corporate Cove West, Bartlett, TN 38133 901-372-8020 INDEX Page 3 The Importance of a Well-Informed Clinician Page 4
More informationPrograMill. Well equipped for the digital future
Equipment CAM PrograMill Well equipped for the digital future Digitization is changing dental technical working methods and procedures in the laboratory. New production processes and materials require
More informationZENOSTAR CAD/CAM MANUAL.
ZENOSTAR CAD/CAM MANUAL 0123 Status September 2014 www.zenostar.com Table of Contents 1 NOTES ON PREPARATION... p. 4 2 DESIGN PARAMETERS... p. 6 2.1 Minimum wall thicknesses... p. 6 2.2 Connector cross-sections...
More informationProduct ID Mineral Features Metal Type 361F. General purpose grinding, light grinding, blending, and deburring on all metals 461F
3M Roloc Cloth Disc Selection Guide Good Better Best Product ID Mineral Features Metal Type 361F Aluminum Oxide General purpose grinding, light grinding, blending, and deburring on all metals 461F Silicon
More informationIPS e.max ZirCAD INNOVATIVE AND VERSATILE ZIRCONIUM OXIDE
Dental technicians IPS e.max ZirCAD INNOVATIVE AND VERSATILE ZIRCONIUM OXIDE all ceramic all you need Groundbreaking innovations. Impressive reliability and esthetics. the most used all-ceramic system
More informationall ceramic all options Overview of the Zenotec materials
all ceramic all options Overview of the Zenotec materials Table of contents Quality from a single supplier...p. 3 The materials...p. 4 Zenotec Zr Bridge...p. 5 Zenotec Color Zr...p. 6 Telio CAD for Zenotec...p.
More informationDiamond abrasives offering customized and tailored solutions for demanding applications. TOOLMAKER SOLUTIONS MBG Diamond
Diamond abrasives offering customized and tailored solutions for demanding applications TOOLMAKER SOLUTIONS MBG Diamond MBG DIAMOND FOR DEMANDING GRINDING APPLICATIONS Hyperion s MBG diamond offers a solution
More informationLithium Disilicate Press on Zirconia
All Ceramic Materials for All-Ceramic Restorations Lithium Disilicate Press on Zirconia User's Manual User's Manual Table of Contents Introduction 3 1 Prep Guide 4 2 Seleting the ingots 5 3 Zirconia Framework
More informationNew! 3M Silver Depressed Center Grinding Wheel
New! 3M Silver Depressed Center Grinding Wheel 3M Abrasives for Right-Angle Systems Cut, grind, finish and more with a When simple world-class job is bigger abrasive than expected, system save that your
More information52 NORTON THE MUSCLE BEHIND THE MACHINE
52 NORTON THE MUSCLE BEHIND THE MACHINE www.nortonabrasives.com 53 Category definition Flap discs are versatile grinding and finishing tools, consisting of three main components: a backing plate, adhesive,
More informationTOGETHER WE ENTER THE DIGITAL WORLD
TOGETHER WE ENTER THE DIGITAL WORLD SCANNING PRINTING MILLING Discover your full Novux solution www.zahndental.com/novux Exclusively Available from ZAHN DENTAL Exclusively Available from ZAHN DENTAL SCAN
More informationGRIND AND FINISH IN ONE STEP Get the most demanding grinding and finishing jobs done right and done fast / weilercorp.
FLA DISCS GRIND AND FINISH IN ONE STE Get the most demanding grinding and finishing jobs done right and done fast. 800.835.9999 / weilercorp.com SELECTING THE RIGHT FLA DISC Weiler s abrasive flap discs
More informationEN-US DNA GENERATION. THE INHOUSE MOVEMENT
EN-US DNA GENERATION. THE INHOUSE MOVEMENT DNA GENERATION. POWER + DENTAL INTELLIGENCE = PERFORMANCE Our milling machines are created fully in-house and exclusively at Amann Girrbach headquarters in Koblach,
More informationPrecision Mounted Points
Precision Mounted Points Solutions for Industry www.master-abrasives.co.uk Introduction Master Abrasives The MASTER brand is known internationally as a high-quality brand of abrasives, tools and consumables
More informationContents. Technical Information Flap Discs Flap Wheels Mounted Points. Ordering Information
JOSCO ABRASIVES Contents Technical Information Flap Discs Flap Wheels Mounted Points 1.0 2.0 3.0 Ordering Information Technical Information Flap Disc Backing Plastic Backed The benefit of a plastic backing
More informationStrong & Beautiful. Aesthetic high performance ceramics. cubic zirconia system. Flexural strength > 750 MPa Translucency 49% CLOSE TO YOU JAHRE
Strong & Beautiful Aesthetic high performance ceramics DDcube cubic zirconia system Flexural strength > 750 MPa Translucency 49% 20 20 CLOSE TO YOU JAHRE 1 49% Translucency* *measured by means of a spectrophotometer
More informationProgramat CS4. Fast and easy. for flawless IPS e.max ZirCAD and IPS e.max CAD restorations. The combination furnace for the dental practice
Programat CS4 The combination furnace for the dental practice Fast and easy for flawless IPS e.max ZirCAD and IPS e.max CAD restorations New combination furnace - for a universal range Full-contour IPS
More information52 NORTON- R TE JAR A T.C OM
TEJARAT TOOLS 52 NORTON- WWW.ABZA R TE JAR A T.C OM 66736774-66736726 category DEfiNitiON flap discs are versatile grinding and finishing tools, consisting of three main components: a backing plate, adhesive,
More informationAbrasive mop discs for
KLINGSPOR Abrasive mop discs for maximum demands Even surface finish over tool s full service life High stock removal efficiency per unit of time Low noise level Low set-up time Cool grinding Smooth running
More informationSHAFT-MOUNTED FLAP WHEELS
FLAP WHEELS 49 SHAFT-MOUNTED FLAP WHEELS Description: The abrasive flaps are radially arranged from the tool axis. RG shaft-mounted flap wheels are coupled to the electrical or pneumatic tool spindle by
More informationDATRON D5. Compact Milling/Grinding Machine for the economic manufacturing of high quality, aesthetic dental restorations
DATRON D5_200810_D_V10 DATRON D5 Compact Milling/Grinding Machine for the economic manufacturing of high quality, aesthetic dental restorations 2010 DATRON AG The information in this brochure includes
More informationon the spot Shaping and finalising of sintered metals Jota Kit 1926 & 1927 by DT Knut Miller
on the spot Jota Kit 1926 & 1927 Shaping and finalising of sintered metals Characterize of sintered metals in the green state and final polishing of the sintered restoration. Safe removal of the restoration
More informationFIBRE DISCS. Introduction. Aluminium oxide. Aluminium oxide with grinding aid 290. Zirconium oxide. Ceramic with grinding aid 293.
282 Introduction 284 Aluminium oxide 288 Aluminium oxide with grinding aid 290 Zirconium oxide 291 Ceramic with grinding aid 293 Silicon carbide 294 Overview back-up pads 295 283 = available from stock
More informationTYROLIT. Perfect solutions for every application. A Company of the SWAROVSKI Group
TYROLIT flap disc range Perfect solutions for every application A Company of the SWAROVSKI Group www.tyrolit.com Contents 2 Contents Pictograms Premium Longlife for steel 4-5 Premium Cerabond flap disc
More informationDigital Dentistry. Digital Dentistry
rainbow is a complete dental diagnostic system ranging from CAD/CAM equipment to Lab products. Dentium is committed to developing, manufacturing and offering a full series of products related to prosthetics
More informationFLAP DISC PROGRAMME NEW
FLAP DISC PROGRAE NEW AVAILABLE FROM JUNE 2018 CUTTING. START WITH ROUGHING. DRONCO. GRINDING. POLISHING. FINISH WITH DRILLING. OSBORN. EFFICIENT SOLUTIONS FOR METAL PROCESSING Dear customers, Growing
More informationAnglon Tools Tools for ANGL ROTARY HANDPC Soft rubber pads available in 4 different diameters (ø 0 mm, ø mm, ø 30 mm, ø mm) are available. Pressure se
inimo One Anglon Tools inimo Anglon System -- Versatility & Performance inimo Anglon angle grinders, with angles of 90 and degrees, are suitable for polishing flat, curved and end surfaces. Great for areas
More informationElectroplated diamond tools Economical processing of grey and nodular cast iron
Economical processing of grey and nodular cast iron TRUST BLUE Sustainable process optimization when fettling Maximum efficiency due to excellent tool life and stock removal rate Comfortable working with
More informationVariable-speed 1400 watt angle grinder, 125 mm L 3406 VRG
Variable-speed 400 watt angle grinder, 25 mm L 3406 VRG Order number 406.503 Max. disc diameter 25 mm Max. polishing pad diameter 60 mm No load speed 200-7500 rpm Power input 400 watt Power output 880
More informationDouble-Disc Grinding
Double-Disc Grinding Paired with an extensive knowledge of the up- and downstream processes, Supfina Grieshaber has long experience in the field of superfinishing machines with both stones and tapes. Supfina
More informationFLAP DISCS CERAMIC ALUMINA - PLATINUM APPLICATION GRIT SELECTION. Abrasives COARSER (GRINDING) FINER (FINISHING)
FLAP DISCS CERAMIC ALUMINA - PLATINUM Made with the latest generation German ceramic alumina material Exceptional performance on stainless steel, titanium and super alloys Faster cutting with reduced heat
More informationMasterflex Polishing Products
Masterflex Polishing Products How to Order Masterflex Polishing Products When ordering it is important to give as much information about the operation as possible so that the correct grading is supplied.
More informationHarder. Faster. Yellow. The new Kronenflex cutting-off wheels
Harder. Faster. Yellow. The new Kronenflex cutting-off wheels Nothing can beat good, solid tools For us, as the inventor of high-speed cutting-off wheels, it goes without saying that we are interested
More informationTrusted. Brand. Lava Plus. Now in Disc Format. High Translucency Zirconia
Trusted Brand. Now in Disc Format. High Translucency LAVA PLUS HIGH TRANSLUCENCY ZIRCONIA NOW AVAILABLE IN DISC FORMAT Lava is widely acknowledged as the trusted brand that built the market for zirconia
More informationCUTTING & GRINDING WHEELS E TREMECUT
CUTTING & GRINDING WHEELS E TREMECUT REFERENCE & APPLICATION GUIDE CUT-OFF WHEELS CUTTING AND GRINDING WHEELS GRINDING WHEELS Notes CUTTING & GRINDING WHEELS EXTREME ABRASIVES is proud to represent MABTOOLS
More informationAPPLICATIONS. (229mm) (254mm) (305mm) (355mm) PRODUCT NUMBERS PRODUCT DETAILS
The first step in metallographic sample preparation consists in sectioning a sample from a larger given piece to obtain a representative crosssection. Sectioning a material without causing structural changes
More informationPOWER AT YOUR FINGER TIPS THE WORLD IN THE PALM OF YOUR HAND
POWER AT YOUR FINGER TIPS THE WORLD IN THE PALM OF YOUR HAND Put the world right in the palm of your hand with our 2" and 3" Norton Mini Angle Sanders. Small, compact enough in getting to those hard-to-reach
More informationALWAYS A WINNING HAND
ALWAYS A WINNING HAND NORTON ABRASIVES AND TOOLS An operator s and production foreman s perfect tool: our new Norton pneumatic die grinder quickly and comfortably accomplishes many portable applications
More informationPOWER AT YOUR FINGER TIPS THE WORLD IN THE PALM OF YOUR HAND
POWER AT YOUR FINGER TIPS THE WORLD IN THE PALM OF YOUR HAND Put the world right in the palm of your hand with our 2" Norton Mini Angle Sander. Small, compact enough in getting to those hard-to-reach areas,
More informationPatented! A46N - Aluminum (Non-Ferrous Metals) Aluminum oxide grain Thin.045 width Soft bond for aggressive cutting without loading GRINDING CUTTING
60S - General Purpose So unique it has a patent Special aluminum oxide grain Hard bond for extremely long life Fast, burr-free cutting Patented! Ferrous and/or non-ferrous metals See pages 30-31 for Type
More informationOptimized workflow, greater productivity
Digital Material Solutions Optimized workflow, greater productivity Optimized workflow, greater productivity Lab consolidation has created an intensely competitive environment, making it more critical
More informationPolishing-, Ceramic Stones & Accessories
Polishing-, Ceramic Stones & Accessories 5 a company A COMPANY Content Polishing-, Ceramic Stones & Accessories 5 Polishing-, Ceramic Stones & Accessories Polishing Stones...2 Ceramic Stones...16 Super
More informationModels available: Markforged Onyx One Markforged X3 Many FDM models from numerous OEM s worldwide
Markforged Onyx One Markforged X3 Many FDM models from numerous OEM s worldwide FFF uses a string of solid material (filament), pushing it through a heated nozzle and melting it in the process. The printer
More informationJUMA ABRASIVE CO., LTD.
一 Cutting Wheel 1: straight cutting wheel Item No. straight cut-off wheel Detail description: Cutting of sprues, stainless steel sheet, full-materials, tubes and profiles. Used for material: Tool steels,
More informationGrinding and Cut-Off Wheels
Grinding and Cut-Off Wheels 2005 Grinding and Cut-Off Wheels Colour Coding System, Table of Contents PFERD Colour Coding System PFERD grinding and cut-off wheels are marked with an easy-to-follow colour
More informationCATEGORY DEFINITION. SIZE RANGE: 3/4" 4" diameter GRIT RANGE:
CATEGORY DEFINITION Tool-free, twist-on and -off fastening systems make fast work of disc changes to maximize productivity by minimizing downtime. APPLICATIONS: Fiber and NorKut trimmable hard plastic
More informationA 30/36 V BF. coarse medium fi n e soft medium hard. A aluminium oxide M R U BA resin bond
Cutting and Grinding Discs echnical Information Durability Resin bonded grinding and cutting wheels for free-hand application must be used within three years of manufacture. Please see metal ring for the
More informationKNIVES. giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING
KNIVES giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING ATLAS has comprehensive in-house designing facility to design new products according to customer s specific requirements with complete satisfaction
More informationTAKE IT ON WITH TITANOX
YU-TP8 BEST VALUE IN THE WORLD OF CUTTING TOOLS FOR TITANIUM, STAINLESS STEEL AND ALLOY STEELS : TOUGH MATERIALS? TAKE IT ON WITH TITANOX INDUSTRY-LEADING SOLID CARBIDE END MILLS HIGH-PERFORMANCE MACHINING
More informationANGLE GRINDERS ACCESSORIES
ANGLE GRINDERS ACCESSORIES Boost THE GRINDER performance ADVANTA with For Highest Performance, Productivity and Safety: THE GRINDER ADVANTAGE Quick Toolless Wheel Change System Most Powerful LongLife Motor
More informationProviding Quality Forging Since 1931
Providing Quality Forging Since 1931 ISO Certified since 1993 Story Composite Forgings Ltd. is an ISO 9001:2008 Certified open die forging company which meets the provisions of PED 97/23/ EC 7/2, Annex
More informationTHE NEW DNA OF HIGH-STRENGTH GLASS CERAMICS.
THE NEW DNA OF HIGH-STRENGTH GLASS CERAMICS. The New DNA of High Strength Glass Ceramics Beauty. Strength. Speed. DENTSPLY presents a new class of high-strength glass ceramic materials with zirconia-reinforced
More informationInstructions for use. i-motion Zirkon. Issued April CE 1250 Audent AG, Tristelstrasse 36, Postfach 1152, FL Triesenberg
Instructions for use Issued April 2015 i-motion Zirkon - 1 - Instructions for use i-motion Zirkon layering ceramic Acc. VITA * classical shade guide colors *VITA is a registered trade mark of the VITA-
More informationRESIN FIBER DISCS NEW PRODUCT ANNOUNCEMENT INTRODUCTION DATE JULY 1, SABER TOOTH 15 Skus. TIGER (ZIRCONIA) 15 Skus.
CERAMIC ALUMINUM RESIN FIBER DISCS ZIRC ALUMINUM OXIDE INTRODUCTION DATE JULY 1, 2017 Weiler Abrasives Group announces the expansion of its resin fiber discs (RFDs) offering to include five new products
More informationCutting and Grinding Discs
Cutting and Grinding Discs 168 echnical Information 169 Structure and Components 170 Safety 171 Labelling 173 185 Grinding discs line marking he product lines are illustrated by star symbols at the top
More information3M Asia Pacific Bonded Abrasive Products Catalogue. Cutting Edge. Performance
3M Asia Pacific Bonded Abrasive Products Catalogue Cutting Edge Performance 3MTMBonded Abrasives & Cut-Off Wheel Tools 3M TM Rigid Grinding Discs The 3M TM rigid grinding discs are 6mm thick depressed
More informationNew Possibilities for Refractory Castable
New Possibilities for Refractory Castable This paper is not intended to provide a detailed report or demonstrate conclusions. It has been written to provide overall information on current M/Phil by Practice
More informationINDEX. page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9
INDEX Bonded Abrasives (cutting & grinding discs) page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9 Coated Abrasives (sanding
More informationTHE CoCr REVOLUTION. THE INHOUSE MOVEMENT
EN THE CoCr REVOLUTION. THE INHOUSE MOVEMENT 2 CoCr SINTER METAL FOR INHOUSE DRY PROCESSING 3 MIO UNITS CLINICALLY PROVEN With the dry-millable Ceramill Sintron sinter metal and the Ceramill Argotherm
More informationProgramat S faster and more efficient. restorations has just become. Now with. The exceptional sintering furnace
Programat S1 1600 The exceptional sintering furnace Now with Sintering IPS e.max ZirCAD Programat Dosto Tray restorations has just become faster and more efficient Programat S1 1600 Faster and more efficient
More informationBPR Swiss Laboratory Line: Performance and Reliability in Dental Laboratory.
BPR Swiss Laboratory Line: Performance and Reliability in Dental Laboratory. 2 LABORATORY TURBINES LABORATORY TURBINES 3 BPR Swiss Laboratory Turbines. Enjoy the Difference. The shadow-free LED light turbine
More informationSanding, Grinding, & Accessories
Sanding, Grinding, & Accessories Grinding wheels, cut-off wheels, flap discs, and other surface preparation abrasives for all your metalworking needs. Find topquality manufacturers such as Sait,, Camel,
More informationReinforced Grinding Wheels
5 Product Lines, Product Categories For the wide variety of abrasive grinding applications in industry and crafts PFERD now offers three new types of reinforced grinding wheels with their proven colour
More informationAdvanced solutions for the Healthcare sector
TECHNICAL CERAMICS Morgan Advanced Materials For all inquiries, please contact our specialist sales and marketing offices: Morgan Advanced Materials is a global engineering company offering world-leading
More informationphaser LASER QUALITY WELDING pulsed micro arc welding unit the primotec phaser welders based on pulsed micro arc
LASER QUALITY WELDING phaser pulsed micro arc welding unit the primotec phaser welders based on pulsed micro arc technology are optimized for easy, fast and reliable welding of all types of dental welding
More informationCoated, Bonded & Non-Woven Product Catalog & Reference Guide
Coated, Bonded & Non-Woven Product Catalog & Reference Guide 2 3 For More Information About this Guide For more information on our Standard Abrasives offering, visit www.standardabrasives.com Notes and
More informationStationary Cut-Off Wheels Stationary Cut-Off Wheels
Stationary Cut-Off Wheels I 1 Grinding and Cut-Off Wheels Stationary Cut-Off Wheels able of Contents, Cutting Processes Cut-off wheels for stationary machines are allocated to the PFERD performance line
More informationA 30/36 V BF. coarse medium fi n e soft medium hard. A aluminium oxide M R U BA resin bond
Cutting and Grinding Discs echnical Information Durability Resin bonded grinding and cutting wheels for free-hand application must be used within three years of manufacture. Please see metal ring for the
More information3 steps to excellent esthetics
Screen-optimized, 3M Lava Esthetic Fluorescent Full-Contour Zirconia 1 disc per pack Disc height 14 mm Disc height 18 mm Disc height 22 mm Shade Item No. Item No. Item No. Bleach 69319 69327 69335 A1 69320
More informationAdvanced CAD/ CAM technology for the perfect smile
Advanced CAD/ CAM technology for the perfect smile Delivering tangible improvements to every layer of dentistry Core3dcentres 140i The Chairside deluxe solution for practice laboratories The new Practice
More informationHand Finishing Systems
Hand Finishing Systems Choosing the right Hand Pad for your application, made easy with Scotch-Brite non-woven material. www.3m.com.au/scotch-britehandsanding Less aggressive finer finish Scotch-Brite
More informationTUBE AND SHEET DRILLS
TUBE AND SHEET DRILLS 03 Tube and sheet drills The flutes of the RUKO high performance tube and sheet drills are BN ground from the solid hardened form. Because BN (cubical boron nitride) is a much harder
More informationUNIT III BULK DEFORMATION PROCESS
Hot Working of Metals UNIT III BULK DEFORMATION PROCESS Hot working is defined as the process of altering the shape or size of a metal by plastic deformation with the temperature above the recrystallisation
More informationCoated, Bonded & Non-Woven Product Catalog & Reference Guide
Coated, Bonded & Non-Woven Product Catalog & Reference Guide 2 Standard Abrasives Over 50 Years of Success and Service Since 1959, the Standard Abrasives brand has been changing the way industry works
More informationFLEXIBLE AND SEMI-FLEXIBLE ABRASIVES
FLEXIBLE AND SEMI-FLEXIBLE ABRASIVES FLEXIBLE AND SEMI- FLEXIBLE ABRASIVES 119 Fibre discs for use on angle grinders Derusting, deburring, removal. DRONCO fibre discs are excellent for all abrasive
More informationOptiFlex 2. any powder any part any place. Your global partner for high quality powder coating. Manual powder coating
OptiFlex 2 any powder any part any place Manual powder coating The new OptiFlex 2 puts the world s most advanced manual powder coating technology in the palm of your hand. Spray all powders with ease,
More informationFactFile. Celtra Duo. Zirconia-Reinforced Lithium Silicate (ZLS) Block. Properties of zirconia-reinforced lithium silicate ceramic (ZLS)
Celtra Duo Zirconia-Reinforced Lithium Silicate (ZLS) Block FactFile The product name Celtra stands for a new generation of high-strength dental ceramic and defines a new class of material referred to
More informationPolycrystalline diamond blanks and cut shapes for inserts and round tools. TOOLMAKER SOLUTIONS Compax PCD Tool Blanks and Inserts
Polycrystalline diamond blanks and cut shapes for inserts and round tools TOOLMAKER SOLUTIONS Compax PCD Tool Blanks and Inserts COMPAX PCD PRODUCT OFFERING Hyperion offers a vast selection of superior
More informationTechnical Information
Diamondtools Technical Information The Diamond Diamonds are the hardest known material.they are selected depending on the field of application. For diamond blade manufacture synthetic diamonds are solely
More informationSTE portable hardness tester
STE portable hardness tester The proper solution for any hardness control issue STE - portable hardness tester STE Calibrated pin ERNST principle Resistant and reliable Works in narrow spaces, in all positions,
More informationcubic zirconia system
The (R)evolution cubic zirconia system Bending strength according to ISO 6872 > 720 MPa Fracture toughness according to ISO 6872 > 4,5 MPa m Translucency at a thickness of 0,6 mm 49 % 3420 Pharmacy Ave.
More informationFREQUENTLY ASKED QUESTIONS KATANA ZIRCONIA BLOCK
FREQUENTLY ASKED QUESTIONS KATANA ZIRCONIA BLOCK Use our new KATANA Multi-Layered Zirconia Block with Dentsply Sirona s CEREC System and fabricate full natural zirconia restorations in 45 Minutes.* Full
More informationCeltra Duo. Developed to make a difference. Brochure for the dental laboratory
Celtra Duo Developed to make a difference Brochure for the dental laboratory Introduction All-ceramics as a therapy concept In the past 10 years, zirconia (e.g. Cercon) and high-strength glass-ceramics
More informationget the quality stone advantage
get the quality stone advantage Save Money Installation cost savings up to 10X that of other stone options Installed with general carpentry skills = DYI Quality Design Quality Stone is THE most realistic
More informationKnot Wheel Brushes WHEEL BRUSHES
W HE E L B RU S H E S 4 5 Knot Wheel Brushes Knot Wheel Brushes Knot wheel brushes for grinders, angle grinders and stationary machines used in the preparation and reworking of bolt fillet and butt welds.
More informationNatural beauty restored. Lithium Disilicate Redefined
Natural beauty restored. Lithium Disilicate Redefined GC Initial LiSi Press The revolutionary pressable ceramic Imagine a pressable ceramic that outperforms all existing products. Imagine a pressable ceramic
More informationNORTON ALL THE MUSCLE YOU NEED
5 DIAMOND BLADES redefining versatility AS A CUT-ALL BLADE Contractors can keep moving from job to job without having to change blades when cutting asphalt, concrete, abrasive material, ductile, rebar,
More informationChemical Applications Division. ALUTIT Aluminum Titanate advanced ceramics for the nonferrous molten metal industry
Chemical Applications Division ALUTIT Aluminum Titanate advanced ceramics for the nonferrous molten metal industry T H E C E R A M I C E X P E R T S ALUTIT the ultimate in thermal resistance On the one
More informationTungsten Carbide Rotary Burrs
Tungsten Carbide Rotary Burrs Solutions for Industry www.master-abrasives.co.uk Introduction Master Abrasives The MASTER brand is known internationally as a high-quality brand of abrasives, tools and consumables
More informationKeysight Technologies Laser Heated Tip and High Temperature Stage for G200 Nano Indenter. Data Sheet
Keysight Technologies Laser Heated Tip and High Temperature Stage for G200 Nano Indenter Data Sheet Overview The Nano Indenter G200 from Keysight Technologies, Inc. is the world s most flexible, and user-friendly
More informationEquipment of machinery for contract manufacturing
Equipment of machinery for contract manufacturing Milling Technology: EDM Technology: Grinding and Lapping Technology: Laser Technology: CNC micro milling and micro drilling High-precision milling in μ-range
More informationDENTAL DIVISION. The easiest Dental CAM System OF TECHNOLOGY EXCELLENCE YEARS
DENTAL DIVISION YEARS OF TECHNOLOGY EXCELLENCE The easiest Dental CAM System The most intuitive and user friendly Dental CAM solution ever made An Interface specifically developed for immediate use, with
More informationTREMEQUALITY RESIN FIBRE DISCS
E TREMEQUALITY REFERENCE & APPLICATION GUIDE A CUT AloCUT AloCUT TS Z CUT ZirCUT C CUT TS CerCUT RED FURY FineCUT Notes Resin Fibre Discs (RFDs) are abrasive tools designed to be used where abrasives need
More informationEXTEC CORP. A LASTING COMMITMENT
A LASTING COMMITMENT Extec Corp., a manufacturer of supplies and sample preparation equipment, is proud to provide you with our catalog of EXTEC Premium Supplies and Equipment. Extec s focus is on the
More informationPress for perfection!
Press for perfection! Initial LiSi Press NEXT LEVEL STRENGTH & AESTHETICS from GC H D M Lithium Disilicate Glass Ceramics T E C H N O L O G Y the REVOLUTIONARY PRESSABLE CERAMIC Imagine a pressable ceramic
More information