Technology Applications Group, Inc. Grand Forks, North Dakota. TAGNITE The Ultimate Coating for Magnesium Sand Castings
|
|
- Lee Collin Sullivan
- 5 years ago
- Views:
Transcription
1 Technology Applications Group, Inc. Grand Forks, North Dakota TAGNITE The Ultimate Coating for Magnesium Sand Castings
2 TAGNITE Briefing Overview Briefing Overview Review of Immersion TAGNITE Review of Brush TAGNITE Success Story AH/MH-6 Little Bird
3 Dow 17 Approximately 1942 The Dow Chemical Company invented Dow 17 in the Early 1940 s. The electrolyte has a ph of approximately 5 and should be operated at or above 160 o Fahrenheit. CHEMICAL Concentration g/l Ammonium BiFluroide 360 Sodium Dichromate (hazardous chemical) 100 Phosphoric Acid 97
4 HAE Patent Filed 1952 HAE, named after inventor Harry A. Evangelides. The very high alkaline solution has a ph of approximately 14 and should be operated between 70 and 86 o Fahrenheit. Recommended post treatment contains approximately 20 grams per liter of Sodium Dichromate CHEMICAL Concentration (g/l) Hydroxide (extremely caustic) 120 Fluoride 35 Potassium Permanganate (strong oxidizer) 20 Aluminum Hydroxide 34 Sodium Phosphate 35
5 TAGNITE Developed in the 1990 s with the Clean Air & Clean Water Act in mind, TAGNITE was designed as a replacement coating for Dow 17 and HAE. The electrolyte s ph range is and operates below room temperature (40-60 o F), CHEMICAL Concentration (g/l) Hydroxide 4-8 Fluoride 5-10 Silicate No Chromates or Heavy Metals
6 Chemical Composition as a Percentage of Water TAGNITE HAE Dow 17 5% * chemical concentration *Approximations 25%* chemical concentration 56% * chemical concentration HAE contains heavy metals; Dow 17 contains heavy metals and chromium
7 SUPERIOR Corrosion Resistance TAGNITE HAE DOW 17 TAGNITE, HAE & Dow 17 (Type I) on magnesium alloy ZE41 after 168 hours in salt spray Only Tagnite Provides Inherent Corrosion Resistance
8 Coating Morphology Dow 17 HAE All photos shown at 500x magnification. TAGNITE
9 SUPERIOR Galvanic Corrosion Resistance TAGNITE 8200 HAE DOW 17 AZ91E sand cast magnesium test plates assembled using cadmium plated steel bolt/washer & placed in salt spray (ASTM B117) for 1000 hours.
10 Galvanic Corrosion Improvement Benefit of Rockhard Resin Seal ZE41A Alloy AZ91E Alloy Each test plate was exposed to 1000 hours of salt spray. Galvanic contact is comprised of a cadmium plated steel hardware. Both plates were Tagnite coated and wet assembled; only the ZE41A plate was Rockhard resin sealed.
11 TAGNITE PROVIDES.... Improved Corrosion Resistance Excellent Paint Base Excellent Wear Resistance Superior Galvanic Protection A Process with NO CHROMATES Proven Technology for over 10 years Affordable Technology
12 Brush TAGNITE for Touchup Repair Selective Anodization of Magnesium Parts No Chromates Environmentally Friendly (EPA DfE)
13 Brush TAGNITE Unit Consists of... Rectifier Cables and Clamps Pre-treatment Kit Brush TAGNITE Electrolyte Blister Pack Post-treatment treatment Kit
14 Brush TAGNITE Performance... Corrosion Resistance Comparable to DOW 19 Paint Adhesion Comparable to DOW 19 Compatible with Ferrous Material No Chromates (EPA DfE Designation)
15 TAGNITE Protects the MD 500/600 and H-6 H 6 Little Bird Little Bird has Approximately 9 WE43 Castings Which After 9 Years in Service are Showing No Signs of Corrosion
16
17 This Label Signifies The Best Practice in Magnesium Finishing
18
19 H-6 6 Little Bird Tail Rotor Gearbox Coated with Tagnite in Approximately 1997
20 H-6 6 Little Bird Tail Rotor Gearbox Coated with Tagnite in Approximately 1997
21 TAGNITE Has been Protecting the Magnesium Castings on the Apache Helicopter for Foreign Military Operators Since U.S. Army Recently Decided to Transition From Dow 17 to TAGNITE and First Orders for U.S. Army Spares Have Been Placed.
22
23
24
25
26 Your Source for Quality Magnesium Finishing Technology Applications Group th Street South Grand Forks, North Dakota TAGNITE (phone) (fax)
Environmental Projects for Aerospace Applications
Environment, Energy Security & Sustainability (E 2 S 2 ) Symposium Environmental Projects for Aerospace Applications This information product has been reviewed and approved for public release. Reference
More informationBoeing Specifications
Page 1 of 6 = updated = Performed by GKN BAC 5000 AH General Sealing PSD 6-211, 6-220, 6-222, 6-224, 6-225, 6-227, 6-228 BAC 5004 L Installation of Permanent Fasteners PSD 6-121, 6-122, 6-125 BAC 5004-1
More informationSpecifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AP General Sealing 6-277, 6-281,6-286,6-287,6-288,6-291, 6-295, 6-296 PSD for 787 Only: PSD for 777 Only: BAC 5004 M Installation of Permanent Fasteners 6-121, 6-122, 6-133
More informationHexavalent Chromium Free Coatings Projects for Aerospace Applications
Hexavalent Chromium Free Coatings Projects for Aerospace Applications August 2012 Chris Gieseking Digital Fusion/Aviation and Missile RDEC Weapons Development and Integration Directorate 256-313-6768 Report
More informationRivet nut fully installed
Environment Rules Joint Design, by Adam Pratt Over seven decades ago rivet nuts were invented for airplane wing attachment points. Since then, the need for reliable threads in thin materials has dramatically
More informationTHE INFLUENCE OF ANODISING PARAMETERS ON THE CORROSION PERFORMANCE OF ANODISED COATINGS ON MAGNESIUM ALLOY AZ91D
THE INFLUENCE OF ANODISING PARAMETERS ON THE CORROSION PERFORMANCE OF ANODISED COATINGS ON MAGNESIUM ALLOY AZ91D Zhiming Shi, Guangling Song, and Andrej Atrens (CRC for Cast Metals Manufacturing (CAST),
More informationTechnical Process Bulletin
Technical Process Bulletin Technical Process Bulletin No. 232971 This Revision: 19-03-2002 NOVACOAT 1100 Conversion Coating Process for Aluminum 1. Introduction: NOVACOAT 1100 is a concentrated acidic
More informationTechnical Process Bulletin
ALODINE 1600 Technical Process Bulletin Technical Process Bulletin No. This Revision: 02/12/2007 1. Introduction: ALODINE 1600 is a concentrated two-package liquid chemical used to produce a hexavalent
More informationPROBLEM CAUSE SOLUTION
Technical Data Sheet HAVASHINE AZ PROCESS Trouble Shooting Guide HCD burning Low HAVASHINE Add 1% HAVASHINE AZ AZ CARRIER CARRIER. Low ammonium chloride Keep the ammonium chloride level at 4 6 opg (30
More informationHAVACOAT MG 15 CHROMATE PROCESS FOR MAGNESIUM
CHROMATE PROCESS FOR MAGNESIUM is a simple room temperature, short dip, chemical process for producing a corrosion protective coating on magnesium and magnesium alloys. can be applied by dip or brush and
More informationRECOMMENDED APPLICATION PROCEDURE FOR SOLID FILM LUBRICANTS & COATINGS
Process Bulletin 3000-A s & Engineered Coatings Everlube Products Surface Technologies Division of Curtiss-Wright 100 Cooper Circle I Peachtree City, GA 30269 T: 770.261.4800 I F: 770.261.4805 I 800-428-7802
More informationAMCOM Hexavalent Chrome Free Initiatives
AMCOM Hexavalent Chrome Free Initiatives 1 December 2010 SERDP-ESTCP Symposium Washington DC Mark Feathers AMCOM G-4 Environmental Division Technology Integration Branch Tel: 256-842-7355 Report Documentation
More informationTechnical Process Bulletin
ALODINE T 5900 Technical Process Bulletin This Revision: 07/11/2011 1. Introduction: Alodine T 5900 treatment develops a complex trivalent chromium conversion coating on aluminium and its alloys, metals
More informationDTIC / 94 5 IS 118. AD-DO Serial No , ELECTE AT, Filing Date 27 September Vinod S.
AD-DO16 224 Serial No. 126.869 Filing Date 27 September 1993 Inventor Fred Pearlstein Vinod S. Aarwala NOTICE The above identified patent application is available for licensing. Requests for information
More informationSection # 2. Assembly Fasteners. ICCA Assembly Fasteners - Section # 2 #
ICCA Assembly Fasteners - Section # 2 Section # 2 Assembly Fasteners There were many suppliers of assembly fasteners to Chrysler through the years. In general there were specific fastener manufacturers
More informationDevelopment of Environmentally Friendly Silica-Based Conversion Coatings for Zn-Ni Alloys
Development of Environmentally Friendly Silica-Based Conversion Coatings for Zn-Ni Alloys James F. O Keefe Vanderbilt University Advisor: Dr. Branko N. Popov, Dr. Prabhu Ganesan July 26 th, 2007 Corrosion
More informationLecture 16: Surface Processing
MSE 440/540: Processing of Metallic Materials Instructors: Yuntian Zhu Office: 308 RBII Ph: 513-0559 ytzhu@ncsu.edu Lecture 16: Surface Processing Department of Materials Science and Engineering 1 Surface
More informationCOMPANY LOCATION APPROVED PROCESS SPECIFICATION
COMPANY LOCATION APPROVED PROCESS SPECIFICATION LOCKHEED MARTIN ORLANDO, FL ALUMINUM CHEMICAL FILM CLASS 1A AMS/MIL-C-5541E ALUMINUM CHEMICAL FILM CLASS 3 AMS/MIL-C-5541E APPLICATION OF PRIMER AND TOPCOAT
More informationFriction and Wear Properties on AZ91D Magnesium Alloy Treated by Anodizing from Phosphate Electrolytic Solution* 1
Materials Transactions, Vol. 52, No. 9 (2011) pp. 1752 to 1758 #2011 The Japan Institute of Light Metals Friction and Wear Properties on AZ91D Magnesium Alloy Treated by Anodizing from Phosphate Electrolytic
More informationCOMMERCIAL ITEM DESCRIPTION ELECTROCOATING PRIMER
[INCH-POUND] March 1, 2010 SUPERSEDING A-A-52474A December 4, 1996 COMMERCIAL ITEM DESCRIPTION ELECTROCOATING PRIMER The General Services Administration has authorized the use of this commercial item description
More informationS80 Intelligent Sensors
S80 Intelligent Sensors The ECD Six Point Advantage ELECTRO-CHEMICAL DEVICES What are the S80 Sensors? Intelligent Sensor Design that includes: Digital Communication Stored Calibration Data Temperature
More informationZYCI CNC Machining and 3D Printing AS9100 Rev D ISO ITAR Registered
CNC Machining and 3D Printing AS9100 Rev D ISO9001 2015 ITAR Registered 2030 Will Ross Court Chamblee, Georgia 30341 T: 404-334-7064 www.zyci.com quotes@zyci.com ANODIZE, CHROMIC...2 ANODIZE, HARD...3
More informationSurface Treatments and Coatings (Lightweight Materials)
Surface Treatments and Coatings (Lightweight Materials) Surender Maddela Ph.D., Lightweight Materials Processing, GM Research and Development Center, Warren, MI- USA Materials Research Center, Missouri
More informationBuilders Hardware Manufacturers Association (BHMA)
Builders Hardware Manufacturers ssociation (BHM) Code Finish Description Base Nearest Category Material US Equiv. 600 Primed for painting USP 601 Bright Japanned US1B 602 Cadmium plated US2C 603 Zinc plated
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 27831-2 First edition 2008-10-15 Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 2: Non-ferrous metals and alloys Revêtements métalliques
More informationTeam Metal Finishing Inc.
Team Metal Finishing Inc. Available Processes: Anodizing Hard Coating Electroless Nickel Sulfamate Nickel Bright and Matte Nickel Silver Plating Gold Plating Tin Plating Chromate Conversion Coatings Immersion
More informationNEW AIRCRAFT PRETREATMENT & WASH PRIMER SYSTEM. Angel Green Cortec Corporation 4119 White Bear Parkway White Bear Lake, MN
Paper No. 0 20 NEW AIRCRAFT PRETREATMENT & WASH PRIMER SYSTEM Angel Green Cortec Corporation 4119 White Bear Parkway White Bear Lake, MN 551 agreen@cortecvci.com ABSTRACT Today s Department of Defense
More informationElectroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
More informationElectroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
More information- RUSTKLEEN. Characteristics Test Method Unit RUSTKLEEN
- RUSTKLEEN Multipurpose Rust Cleaner Excellent rust removing properties Penetrates well in hard to reach area Releases jammed bolts and nuts Effective cleans rusted parts by dissolving rust Very good
More informationMechanism of Corrosion Protection of Anodized Magnesium Alloys
Materials Transactions, Vol. 49, No. 5 (2008) pp. 1057 to 1064 Special Issue on Platform Science and Technology for Advanced Magnesium Alloys, IV #2008 The Japan Institute of Metals Mechanism of Corrosion
More informationPerformance Validation of Thin-Film Sulfuric Acid Anodization (TFSAA) on Aluminum Alloys
Performance Validation of Thin-Film Sulfuric Acid Anodization (TFSAA) on Aluminum Alloys Erin Beck, U.S. Naval Air Systems Command (NAVAIR) Inorganic Coatings, Patuxent River, MD Chromic acid Anodization
More informationRDF. Runway Deicing Fluid SPRAYAWAY RFD ICE MELTER. Technical Data Sheet. ...the best RDF on the market. the best RDF on the market.
ICE MELTER SPRAYAWAY RFD Runway Deicing Fluid...the best RDF on the market. Technical Data Sheet the best RDF on the market. Tech Sheet DESCRIPTION- SPRAYAWAY RDF SPRAYAWAY RDF represents a significant
More informationHAVALLOY Z-C ACID CHLORIDE ZINC / COBALT PROCESS
ACID CHLORIDE ZINC / COBALT PROCESS provides a bright, ductile electro-deposited zinc-cobalt alloy containing from 0.1% to 0.5% cobalt that is evenly distributed at low, mid and high current densities.
More informationSurface Finishing Solutions Using. High-Purity Aluminum
Surface Finishing Solutions Using 888 258 High-Purity 6475 Aluminum Electroplating with High Purity Aluminum Why coat with high purity aluminum? Purity means protection. Imagine being able to combine the
More informationMid Temperature Black Oxide Finish for Steel Premium Grade Deep Rich Black Oxide Smut Free No Boiling Caustic Fumes
Mid Temperature Black Oxide Finish for Steel Premium Grade Deep Rich Black Oxide Smut Free No Boiling Caustic Fumes What is KOOL-BLAK 225? KOOL-BLAK 225 is a chemical solution which converts the surface
More informationGreening DoD Surface Finishing Operations
http://www.asetsdefense.org/ Teaming website: www.materialoptions.com Greening DoD Surface Finishing Operations Keith Legg Rowan Technology Group Libertyville, IL 4/2008 Washington Forum Keith Legg 847-680-9420
More informationTREATMENTS OF METAL SURFACES TO IMPROVE BAL SEAL PERFORMANCE IN DYNAMIC APPLICATIONS
TREATMENTS OF METAL SURFACES TO IMPROVE BAL SEAL PERFORMANCE IN DYNAMIC APPLICATIONS Technical Report TR-1 () (100-64-1) 19650 Pauling Foothill Ranch, CA 92610-2610 Tel (949) 460-2100 Fax (949) 460-2300
More informationTechnical Process Bulletin
Type of Bulletin: Technical Process Bulletin Product Title: ALMECO 730 Product View: ALMECO 730 Description: Anodizing Additive Status: complete ALMECO 730 Anodizing Additive Technical Process Bulletin
More informationThe below identified patent application is available for licensing. Requests for information should be addressed to:
DEPARTMENT OF THE NAVY OFFICE OF COUNSEL NAVAL UNDERSEA WARFARE CENTER DIVISION 1176 HOWELL STREET NEWPORT Rl 02841-1708 IN REPLY REFER TO Attorney Docket No. 300181 24 April 2018 The below identified
More informationPreferred. Steel, Epoxy Powder Coated. Satisfactory. Limited
Corrosion Resistance We manufactures enclosures from a wide range of materials, offering varying degrees of resistance against chemical corrosion. All materials are affected by corrosion in some manner.
More informationBeechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform
Brazing Note: Part Number-specific approval is required for Suppliers who do not hold Nadcap Welding/Brazing certification. Silver brazing requires Part Number-specific approval in all cases. Contact:
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationPRODUCT GUIDE: ZINC-RICH COATINGS. Version:
PRODUCT GUIDE: ZINC-RICH COATINGS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy,
More informationRoom Temperature Metal Blackening & Antiquing Processes. Hot & Mid Temp Oxide Finishes Metal Cleaning & Surface Preps
Specialty Chemical Manufacturer for the Plating and Metal Finishing Industries Where Finishing Excellence Begins Plating Processes Room Temperature Metal Blackening & Antiquing Processes Hot & Mid Temp
More informationISO INTERNATIONAL STANDARD. Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 1: Ferrous metals and alloys
INTERNATIONAL STANDARD ISO 27831-1 First edition 2008-10-15 Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 1: Ferrous metals and alloys Revêtements métalliques et
More informationCHEMICAL SPECIFICATIONS OF ZINC AND ZINC ALUMINUM ALLOYS: TABLE 1 TABLE 1
TECHNICAL BULLETIN CORROSION RESISTANCE OF ZINC And Zinc Alloys CHEMICAL SPECIFICATIONS OF ZINC AND ZINC ALUMINUM ALLOYS: TABLE 1 PROPERTIES OF ZINC ALLOYS The Mechanical and physical properties of the
More informationThe Best Solution to Paint Finish Defects
The Best Solution to Paint Finish Defects ASSEMBLY PLANTS HAVE LIVED WITH THE NAGGING PROBLEM of paint defects caused by weld balls and other ferrous metal. To date, the most effective method of dealing
More informationSECTION SHOP-APPLIED METAL FINISHES
SECTION 05 0513 SHOP-APPLIED METAL FINISHES This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can
More informationOptimization of Zinc Phosphating Process using Statistical Tool
Optimization of Zinc Phosphating Process using Statistical Tool E.Gurunathan 1*, A.Senthilkumar 2 1* Department of CAD/CAM Engineering, Sethu Institute of Technology, India 2 Department of Mechanical Engineering,
More informationHexavalent Chromium and Sustainability of Surface Treatment Processes at the Corpus Christi Army Depot. An AMCOM Force 2025 Transition Plan Initiative
Hexavalent Chromium and Sustainability of Surface Treatment Processes at the Corpus Christi Army Depot An AMCOM Force 2025 Transition Plan Initiative ASETS Defense Workshop December 6, 2016 Mark Feathers
More informationPRETREATMENT TECHNICAL DATA SHEET A REGENERABLE ACID PICKLE PRODUCT DESCRIPTION
INDUSTRIAL COATINGS COR888 A REGENERABLE ACID PICKLE PRODUCT DESCRIPTION is an acidic product used to remove metal oxides from ferrous substrates. is ideally suited for processes that utilize regeneration
More informationDEPARTMENT OF DEFENSE STANDARD PRACTICE
METRIC MIL-STD-871C (USAF) 30 June 2015 SUPERSEDING MIL-STD-871B 01 March 2007 DEPARTMENT OF DEFENSE STANDARD PRACTICE ELECTRO-CHEMICAL STRIPPING OF INORGANIC FINISHES Reactivated 30 June 2015 and may
More informationEnvironmentally Friendly Corrosion Protection in Cleaning Systems for United States Coast Guard Aircraft
Environmentally Friendly Corrosion Protection in Cleaning Systems for United States Coast Guard Aircraft By: Cliff Cracauer Cortec Corporation Presented by: Anna Vignetti Outline Introduction Experimental
More informationElectroless nickel has been shown to replace some hard chrome applications with less machining after plating with similar hardness after baking.
Replacements Electroless nickel has been shown to replace some hard chrome applications with less machining after plating with similar hardness after baking. Some other type deposits have also proven successful
More informationCorrosion Resistance of Aluminum
All Aluminum Technical Traits of Great Passion Corrosion Resistance of Aluminum An All Aluminum Technical Journal January 2008 Physical properties are defined by ASTM testing standards, The Aluminum Association
More informationCorrosion Protection for Fisher Valves
Corrosion Protection Product Bulletin Corrosion Protection for Fisher Valves Control valves operate in some of the most severely corrosive conditions imaginable. Valves used near or on the sea are constantly
More informationDETAIL SPECIFICATION CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
NOT MEASUREMENT SENSITIVE MIL-DTL-5541F 11 July 2006 SUPERSEDING MIL-C-5541E 30 November 1990 DETAIL SPECIFICATION CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS This specification is approved
More informationMILITARY SPECIFICATIONS
ANODIZE TO AEROSPACE MATERIAL SPECIFICATIONS (AMS) AMS anodizing specifications are similar to MIL-A8625. The major differences are in the testing requirements. All AMS specs do not allow production parts
More informationTechnical Process Bulletin
Type of Bulletin: Technical Process Bulletin Product Title: ANOSEAL 9000 Product View: ANOSEAL 9000 Description: Mid Temperature Seal for Anodized Aluminum (low foam) Status: complete Technical Process
More informationHar-Conn Chrome Co. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Har-Conn Chrome Co 603 New Park Ave 06110 United States This certificate demonstrates conformance and recognition
More informationFor high performance anodized aluminum identification plates including bar code labels and UID plates. Because durability really matters
For high performance anodized aluminum identification plates including bar code labels and UID plates. Because durability really matters Identification Plates introduction Virtually every new product and
More informationUseful Specs. file:///volumes/macintosh%20hd/users/mprezner/documents/work... B.H.M.A (Builders Hardware Manufacturers Assocation) Useful Specs
Information B.H.M. (Builders Hardware Manufacturers ssocation) This standard establishes finish test methods and code numbers for finishes on various base materials. It includes criteria for viewing comparative
More informationStroncoat The new generation of zinc-magnesium coatings
Stroncoat The new generation of zinc-magnesium coatings General Properties of Stroncoat Stroncoat - Coating A newly developed hot-dip coating for steel products, provides ultimate corrosion protection
More informationSurTec 650 chromital TCP
Protection upgraded SurTec 650 chromital TCP Properties hexavalent chromium-free passivation for aluminium suitable as post-treatment of anodic coatings 1) suitable as conversion coating of magnesium 1)
More informationElectroplating. Copyright 2016 Industrial Metallurgists, LLC
Electroplating Northbrook, IL 847.528.3467 www.imetllc.com Copyright 2016 Industrial Metallurgists, LLC Course content 1. Process Steps (75 minutes) 2. Properties, Defects, and Evaluation (60 minutes)
More informationMETHODS OF COATING FABRICATION
METHODS OF COATING FABRICATION Zbigniew Grzesik http://home.agh.edu.pl/~grzesik Department of Physical Chemistry and Modelling DEFINITION The coating is the thin outer layer of the object, which physiochemical
More informationEvaluation of Dipsol IZ-C17 LHE Zinc-Nickel Plating
Evaluation of Dipsol IZ-C17 LHE Zinc-Nickel Plating By: Stephen Gaydos Boeing St. Louis for HCAT/JCAT Meeting January 24, 2007 1 Report Documentation Page Form Approved OMB No. 0704-0188 Public reporting
More informationThermal Diffusion Galvanizing
Engineering Test Report M-571 Thermal Diffusion Galvanizing For Pole Line Hardware Revision D 11.17.2017 Added further Corrosion Test results and Abrasion Test results Prepared by 1. Introduction to Thermal
More informationIsrael Institute of Metals E-MRS Fall 2017
Israel Institute of Metals Technion Israel Institute of Technology Founded in 1912 18 faculties, ~60 research centers, 15K students 3 Noble prizes (Shechtman, Hershko and Ciechanover) 5 teaching campuses:
More informationNOTE: BONDERITE C-AK 4338C AERO should not be used on reactive alloys such as aluminum.
INTRODUCTION: (known as Turco 4338-C) is an alkaline permanganate formulation developed specifically for jet engine cleaning. It is used to modify high temperature heat scale by chemically changing the
More informationDETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
INCH-POUND MS51524C 15 November 2017 SUPERSEDING MS51524B 17 March 2016 DETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED Reactivated after 15 November 2017 and may be
More informationEnhanced Corrosion Protection for the H-60 Helicopter
Enhanced Corrosion Protection for the H-60 Helicopter R. Guillemette R. Luchenta Sikorsky Aircraft Materials and Process Engineering Report Documentation Page Form Approved OMB No. 0704-0188 Public reporting
More informationSurface treatment technologies. Ing. Petr Drašnar, Ph.D.
Surface treatment technologies Ing. Petr Drašnar, Ph.D. Zn coatings Mechanism elektrochemical protection barrier protection Methods electroplating hot dip galvanizing thermal spray organic coatings /high
More informationOVERVIEW OF CORROSION PROTECTION ALLOY MP-ACQ FASTENER COATING SYSTEM FOR USE IN ACQ-PRESSURE TREATED LUMBER
OVERVIEW OF CORROSION PROTECTION ALLOY MP-ACQ FASTENER COATING SYSTEM FOR USE IN ACQ-PRESSURE TREATED LUMBER Arnold Satow, President Satow Global Technologies, LLC Corrosion is the electrochemical reaction
More informationP R A C T I C E I O N S Q U I Z - 1
P R A C T I C E I O N S Q U I Z - 1 Hypobromite Hydrogen Dichromate Iodate Thiocyanate Nitrate Permanganate Perbromate Bromate Sodium Nitrite Bicarbonate, Ammonium Hypoiodite Chromate Bisulfate Nickel
More information******* PSDS GENERATED *******
This process is covered by U. S. Patent No. 4,894,127 (Method for Anodizing Aluminum) and U. S. Patent No. 4,504,325 (Methods for Sealing on Aluminum Oxide Film). Patent licenses are available. For information,
More informationAIRCRAFT COLD SPRAY REPAIR COLD SPRAY REPAIR SERVICES
AIRCRAFT COLD SPRAY REPAIR COLD SPRAY REPAIR SERVICES Moog Inc. is best known as a worldwide designer, manufacturer, and integrator of precision motion control products and systems. While very proud of
More informationUltrex CAA Product Code: Revised Date: 10/09/2006. Ultrex CAA Heavy Duty Alkaline Product Derusting - Descaling - Activation
Ultrex CAA Heavy Duty Alkaline Product Derusting - Descaling - Activation Ultrex CAA is a powdered, highly alkaline product, blended with selected sequestrants and alkaline agents. It's unique formulation
More informationPERMABOND HL126 High Strength, Low Viscosity Anaerobic Threadlocker Ref #: PBHL126
PERMABOND HL126 High Strength, Low Viscosity Anaerobic Threadlocker Ref #: 022908PBHL126 TYPICAL APPLICATIONS General Maintenance and Assembly Locks and Seals Fine Threaded Nuts and Bolts Post Application
More informationMetal Framing Channels Overview
New Trivalent Galv-Krom Finish Is RoHS Compliant Thomas & Betts is proud to introduce the new and improved Trivalent Galv-Krom finish. Galv-Krom finish is a combination of.5 mils electro-plated Zinc and
More informationProduct Guide Specification DIVISION SPECIALTIES MANUFACTURERS OF PROTECTIVE COVERS
Product Guide Specification DIVISION 107300 SPECIALTIES MANUFACTURERS OF PROTECTIVE COVERS PART 1 - GENERAL [reference CSI 2004 MasterFormat Division 10 (Specialties Manufacturers) category 7300 (Protective
More informationNACORR Rust & Corrosion Inhibitors
King Industries provide formulators the means to impart corrosion resistance to aqueous and non-aqueous systems. NACORR can be used as the primary corrosion inhibitor or in combination with environmentally
More informationGLOBAL SHIELD COATING TECHNOLOGY A DRAMATICALLY DIFFERENT APPROACH TO RESISTING CORROSION
GLOBAL SHIELD COATING TECHNOLOGY A DRAMATICALLY DIFFERENT APPROACH TO RESISTING CORROSION THE NEW STANDARD FOR CORROSION-RESISTANT PERFORMANCE Global concerns about hazardous materials have given rise
More informationJERRY REGULA PRODUCT ENGINEER MAY 17, 2016
May 17, 2016 JERRY REGULA PRODUCT ENGINEER MAY 17, 2016 Alabama / Mississippi AWWA WHAT MAKES A CORROSION CELL? Anode Cathode Electrolyte path of conductivity Soil type minerals / ph Moisture resistivity
More informationCONCRETE STEPS, HANDRAILS, AND SAFETY RAIL
CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL PART 1 - GENERAL 1.01 SECTION INCLUDES A. Concrete Steps B. Handrails C. Safety Rail 1.02 DESCRIPTION OF WORK A. Construction of concrete steps. B. Furnishing
More informationCorrosion and Thermal Insulation in Hot areas A New Approach
Corrosion and Thermal Insulation in Hot areas A New Approach Mike Mitchell International Protective Coatings Stoneygate Lane, Felling, Gateshead, Tyne & Wear, England Fax No: + 44 (0)191 438 1709 E-mail:
More informationCLEANING AND SURFACE TREATMENTS
CLEANING AND SURFACE TREATMENTS Chemical Cleaning Mechanical Cleaning and Surface Preparation Diffusion and Ion Implantation Overview of Industrial Cleaning Almost all workparts must be cleaned one or
More informationTriPlex - An Aluminum Oxide Thermal Variable Process
TriPlex - An Aluminum Oxide Thermal Variable Process Walt Ahland, Lights Camera Action, LLC, Gilbert, Arizona, USA ABSTRACT MIL-A-8625 is the anodizing model specified for military and aerospace products,
More informationTechnical Process Bulletin
Technical Process Bulletin Technical Process Bulletin No. 234087 This Revision: 02-06-1998 ALODINE 1500 Immersion or Spray Application 1. Introduction: ALODINE 1500 is a liquid chemical used to produce
More informationImprovement of anticorrosion and adhesion to magnesium alloy by phosphate coating formed at room temperature
Improvement of anticorrosion and adhesion to magnesium alloy by phosphate coating formed at room temperature NIU Li-yuan( ), LIN Ji-xing( ), LI Yong( ), SHI Zi-mu( ), XU Lin-chao( ) Advanced Material Research
More informationNovel Corrosion Control Coating Utilizing Carbon Nanotechnology
Novel Corrosion Control Coating Utilizing Carbon Nanotechnology Susan A. Drozdz U.S. Army Engineer Research and Development Center Todd Hawkins Tesla NanoCoatings Limited Report Documentation Page Form
More informationREACH Authorisation and Use of Cr(VI) in the EEA
REACH Authorisation and Use of Cr(VI) in the EEA 21 February 2018 Erin Yaeger Associate Director Pratt & Whitney Engineering REACH Program Compliance Reminder This webinar, including the Q&A session, must
More informationUltrex EDM Product Code: Revised Date: 07/26/2006. Ultrex EDM Heavy Duty Alkaline Product Derusting - Descaling - Activation
Ultrex EDM Heavy Duty Alkaline Product Derusting - Descaling - Activation Ultrex EDM is a powdered, highly alkaline product, blended with selected sequestrants and alkaline agents. It's unique formulation
More informationCorrosion Repair of Magnesium Rotorcraft Components
Corrosion Repair of Magnesium Rotorcraft Components Phillip F. Leyman US Army Research Laboratory Weapons & Materials Research Directorate Presented at Aging Aircraft Conference April 20 2007 - Program
More informationControl No. 17 Garson P. Shulman Alumitec Products Corp Del Am0 Blvd. Torrance, CA (3 10) FAX(3 10)
1. Control No. 17 Organic Acid Sealants for Anodized Aluminum, A.J. Bauman & Thomas D. Brown+, Torrance, CA, & +Douglas Aircraft Co., Long Beach, CA Following the 1963 discovery by Kramer (U.S. Patent
More informationCORROSION PROTECTION INDEX
CORROSION PROTECTION 71862 7 Table of Contents Page Specifications............................... 7-1 Special Tools............................ 7-1 Lubricants, Sealers, and Adhesives......... 7-1 Wiring
More informationEQUIPMENT REPAIR REPORT
EQUIPMENT REPAIR REPORT Date: January, 2011 Customer: Page 1 of 14 Our Reference: Sales order #5000005320 Subject: Gould s AC - SRL-C Slurry Pump 14x12-29 Discharge Bottom Left When viewed from drive end
More informationSPECIFICATIONS: Architectural Aluminum Railings
PART ONE: GENERAL 1.1 SUMMARY SPECIFICATIONS: Architectural Aluminum Railings A. Work in this section includes custom and standard Interior and Exterior aluminum railings and guardrails. 1.2 PERFORMANCE
More information