Coriolis Mass Flow Meter
|
|
- Jeremy Cain
- 5 years ago
- Views:
Transcription
1 Coriolis Mass Flow Meter P Series High Precision Coriolis Mass Flow Meter Xi an Tosilon Automation Co., Ltd No.299, Daqing Rd, Lianhu District, Xi'an Shaanxi, China Tel: info@tosilon.com; Component Parts of P Series Coriolis Mass Flow Meter P Series Coriolis Mass Flow Meter is defined as P Series Mass Flow Meter with Flow Accuracy Rate of 0.1, consisting of "P Series Mass Flow Sensor" and "DPT Transmitter" Features and Benefits of P Series Coriolis Mass Flow Meter - Double U or Double C Measuring Tube Design - Gas Measurement Available - Easy Installation, no need rectifier, filter parts, no special requirements for installing direct pipe section. - High Stability, no need deploying frequent disassemble calibration - Allow Low-Range Run, reducing pressure loss and energy consumption & waste - Integrated Installation saving installation cost - High Stability, expert in "Custody Transfer / Fiscal Metering of Oil & Gas" Selection Principle - In the application of Coriolis Mass Flow Meter, the Max. Flow is decided by "Pressure Loss", while the Min. Flow by "Measurement Accuracy". - When selecting the instrumentation, please refer to this manual, and please provide data associated to the application such as accuracy requirement, flow range, pressure loss, density, viscosity, which ensures the correct selection and application.
2 Performance Index Liquid Flow Rate Performance Index Max. Mass Flow Rate Sensor Type Mass Flow (kg/h) Volumetric Flow [1] (l/h) P10 1,000 1,000 P15 3,000 3,000 P20 6,300 6,300 P25 17,000 17,000 P50 63,000 63,000 P80 160, ,000 P , ,000 P , ,000 P200 1,100,000 1,100,000 P250 1,800,000 1,800,000 Mass Flow Accuracy [2] 15:1, Within Measure Ratio [3] ±0.1% 15:1, Beyond Measure Ratio ± (Zero Stability / Instant Flow Rate) x 100% Volume Flow Accuracy [2] Whole Measure Range ±0.15± (Zero Stability / Instant Flow Rate) x 100% Repeatability 15:1, Within Measure Ratio ±0.05% 15:1, Beyond Measure Ratio ±1/2 (Zero Stability / Instant Flow Rate) x 100% Zero Stability Sensor Type kg/h P P P P P P P P P P [1]. The criterion of volume flow is as per density 1000kg/m 3. Regarding to the process liquid density isn't 1000kg/m 3, the value of volume flow is value of maximum mass flow divided by liquid density. [2]. Flow Accuracy includes repeatability, linearity and comprehensive effect of delay. [3]. Measure Ratio is defined as the value of maximum flow divided by minimum flow.
3 Typical Accuracy, Measure Ratio and Pressure Drop of P50 matched DPT100 Transmitter Performance Index Measure Ratio(from the maximum flow) 20:1 15:1 5:1 1.5:1 1:1 Accuracy ±% Pressure Drop MPa Remark: When the maximum flow rate exceeds the given flow rate range, the noise from the pipe will affect the accuracy. Gas Measurement Performance Mass Flow Accuracy Mass Flow Repeatability flow rate>zero stability/0.005 ± 0.5% flow rate<zero stability/0.005 ± (Zero Stability/Instant Flow Rate) 100% flow rate>zero stability/0.005 ± 0.25% flow rate<zero stability/0.005 ± 1/2(Zero Stability/Instant Flow Rate) 100% Standard Volume In most application areas, customers are used to use standard volume-determining the volume under pressure and temperature, standard volume also called as standard quality flow unit to the fixed component liquid. Applied to the density under standard condition (receiving from reference data), flow meter would be output under the configuration of standard volume unit, which means that could be calculated between measured liquid quality and entrained liquid standard density, but no need the compensation of pressure, temperature and density. Pressure Loss Loss of pressure is affected by the sensor geometric form, gas density and flow rate. While customers are suggested that the sensor loss of pressure couldn't surpass 0.127Mpa when design type selection. Flow Rate The flow rate of gas measure is much greater than the flow rate of liquid measure, the higher flow rate leads to the noise will affect the signal of flow meter. So the flow rate within sensor pipe should be lower 0.5 time than sounds rate when the loss of pressure of flow meter under 0.127Mpa.
4 Performance Index Accuracy and Loss of Pressure Data Samples of P50 Type Flow Meter Measure Different Medium Under Different Pressure Density Performance Index (only liquid) Accuracy [1] ± g/cc ± 1.0 kg/m 3 Repeatability ± g/cc ± 0.5 kg/m 3 Measuring Range g/cc kg/m 3 [1]: Flow Accuracy includes repeatability, linearity and comprehensive effect of delay, density accuracy index of ± 1 kg/m3 is calculated under the condition of 20 Deg. C and 1-2 bar water.
5 Performance Index Temperature Performance Index Accuracy All Types ± 0.5 Deg. C Repeatability All Types ± 0.2 Deg. C Temperature Limits [2] All Types match all Devices Electronics Options [2]. Temperature Limits maybe need explosion Protection for further limit because installation in hazardous area, reference page9. The Temperature must be heated to the local ambient temperature between -40 to 55 Deg. C (such as using steam tracing way) when the temperature below -40 Deg. C. Temperature Range Measured (Deg. C) Liquid Temperature Measured (Deg. C) Ambient Temperature (Deg. C) (PT100) Integrated Installation Divided Installation Storage Application Power Supply & Power Consumption Match DPT100 Maximum 10W For sensor P100 P150 P200 P250, the power amplifiers should be provided with extra power supply. 220VAC (or 24VDC) power supply Maximum 30W (20W) Note: The DC Starting Current of Flow Meter is Less Than 1A (Without Power Amplifier).
6 Environmental Influence Process Temperature Influence Process Temperature Influence (Process Temperature Influence is defined as below) Regarding to Mass Flow Measurement, Process Temperature Influence is the maximum zero variation which is caused by the Process temperature depar tures zero coordinate temperature. Regarding to Density Measurement, Process Temperature Influence is the maximum measure variation which is caused by the Process temperature departures density calibrated temperature. Process Temperature Influence Sensor Type %Maximum Flow Rate Value/ o C Density Accuracy/ o C (kg/m) P10 ± ± P15 ± ± P20 ± ± Maximum Accuracy P25 ± ± P50 ± ± P80 ± ± P100 ± ± P150 ± ± P200 ± ± P250 ± ± Pressure Influence Pressure Influence Pressure Influence is defined as The variation of sensor flow and density is caused by process liquid departures calibrated pressure. Pressure Influence can be modified. Sensor Type Flow Accuracy Influenced by Pressure [1] Density Accuracy Influenced by Pressure [1] %Flow Value / MPa kg/m 3 / MPa P P P P P P P P P P The Data is achieved from pressure influence of flow rate, the specific value is as per the value of sensor nameplate. The maximum calibrated pressure we apply in our factory is 0.4MPa.
7 Usage Limits Pressure Rating Flow Tube Pressure Rating Sensor Type Standard Pressure-Proof MPa Max. Pressure-Proof MPa P P P P P P P P P P The pressure (the unlisted temperature can be calculated by the linear insert method) should be lowered down as per the follow terms if operating temperature surpass 148 Deg. C: 316L Sensor Measuring Tube 304 Sensor Less than 148 No need No need To 204 o C Lower down 7.2% Lower down 5.4% To 260 o C Lower down 13.8% Lower down 11.4% To 316 o C Lower down 19.2% Lower down 16.2% To 343 o C Lower down 21.0% Lower down 18.0% To 371 o C Lower down 22.8% Lower down 19.2% Vibration Limits In accordance with GB/T to bear 50 periods at the condition of a=1g (g=9.8m 2 /s), (20-500) Hz Frequency-scanned. Suggested to apply divided installation if the application area vibration surpass a=0.5g Safety & Protection Tested and issued certification by National Explosive-proof Electrical Products Quality Supervising and Testing Center Explosion-proof Mark: P10 ~ P80 Ex ib IIC T3-T6 P100~P250 Ex d ib IIC T6 Gb Explosion-proof Certification No.: P10~P80 CNEx P100~P250 CNEx Protection Class: IP67 (Sensor)
8 Usage Limits T group refers to the maximum surface temperature of the sensor at the working temperature of 55 Deg. C Explosion-proof performance is accordance with GB , GB , GB Applications: T1~T6 group explosive dangerous location 1 zone and 2 zone, device class llc, downward compatibility lla, IIB The ex-proof performance will not be affected by the installation of sensor and transmitter(separated or integrated).
9 Structure Material Wetted Part Measuring Tube 00Cr17Ni14Mo2 (316L) Separated Liquid Flange Cover Sensor 0Cr18Ni9 (304) Transmitter Junction Box 0Cr18Ni9 (304) or 00Cr17Ni14Mo2 (316L) 0Cr18Ni9 (304) or 00Cr17Ni14Mo2 (316L) Casted aluminum alloy(coated polyester epoxy) Casted aluminum alloy(coated polyester epoxy) Structure Parameter Weight Weight Supplied: GB / T The weight of Steel pipe welding neck flanges with male and female face flow meter for PN 40. counts. All weights as per (kg) for Sensor Type Integrated Installation (kg) Divided Installation (kg) P P P P P P P P P P
10 Dimension P10 Integrated Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B L C H E M I D F Flange (ASME B16.5) A B L C H E M I D F
11 P10 Divided Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face. Flange (HG/T ) A B L C H E M I D Flange (ASME B16.5) A B L C H E M I D
12 P15 Integrated Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B L C H E M I D F Flange (ASME B16.5) A B L C H E M I D F
13 P15 Divided Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face. Flange (HG/T ) A B L C H E M I D Flange (ASME B16.5) A B L C H E M I D
14 P20 Integrated Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B L C H E M I D F Flange (ASME B16.5) A B L C H E M I D F
15 P20 Divided Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face. Flange (HG/T ) A B L C H E M I D Flange (ASME B16.5) A B L C H E M I D
16 P25 Integrated Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B L C H E M I D F Flange (ASME B16.5) A B L C H E M I D F
17 P25 Divided Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face. Flange (HG/T ) A B L C H E M I D Flange (ASME B16.5) A B L C H E M I D
18 P50 Integrated Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B L C H E M I D F 50 (Standard) (Option) Flange (ASME B16.5) A B L C H E M I D F 50 (Standard) (Option)
19 P50 Divided Installation Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B L C H E M I D 50 (Standard) (Option) Flange (ASME B16.5) A B L C H E M I D 50 (Standard) (Option)
20 P80 Mass Flow Sensor Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B C D E F H I M 80 (Standard) (Option) Flange (ASME B16.5) A B C D E F H I M 80 (Standard) (Option)
21 P100 Mass Flow Sensor Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B C D E H I M n 100 (Standard) (Option) Flange (ASME B16.5) A B C D E H I M n 100 (Standard) (Option)
22 P150 Mass Flow Sensor Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B C D E H I M n 150 (Standard) (Option) Flange (ASME B16.5) A B C D E H I M n 150 (Standard) (Option)
23 P200 Mass Flow Sensor Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B C E F H M I D n 200 (Standard) (Option) Flange (ASME B16.5) A B C E F H M I D n 200 (Standard) (Option)
24 P250 Mass Flow Sensor Note: listed flanges in the above form are steel pipe welding neck flanges with male and female face Flange (HG/T ) A B C E F H M I D n 250 (Standard) (Option) Flange (ASME B16.5) A B C E F H M I D n 250 (Standard) (Option)
25 Note: For P100, P150, P200, P250, the ambient temperature of the power amplifiers is -20 ~ 55 (Deg. C), it is not allowed to cover or wrap, nor apply heat tracing to the power amplifiers in the process of heat tracing, otherwise the interior components will be damaged.
26 Order Guide Item Code Description Instrumentation Series P Precise Coriolis Mass Flow Meter 10 1,000 kg/h 15 3,000 kg/h 20 6,300 kg/h 25 17,000 kg/h Sensor Type Transmitter Type Sensor Type Power Supply Process Connection Type Process Connection Dimension 50 63,000 kg/h ,000 kg/h ,000 kg/h ,000 kg/h 200 1,100,000 kg/h 250 1,800,000 kg/h W000 None D100 DPT100 [Accuracy 0.1,Chinese interface,ip65,exde[ib]iict6,divided installation] D101 DPT100 [Accuracy 0.1,Chinese interface,ip65,exde[ib]iict6,integrated installation] D102 DPT100 [Accuracy 0.1,English interface,ip65,exde[ib]iict6,divided installation] D103 DPT100 [Accuracy 0.1,English interface,ip65,exde[ib]iict6,integrated installation] D104 DPT100 [Accuracy 0.1,Russian interface,ip65,exde[ib]iict6,divided installation] D105 DPT100 [Accuracy 0.1,Russian interface,ip65,exde[ib]iict6,integrated installation] B 316L & 304 Stainless Steel, Temperature-Resistance 250 o C C 316L Stainless Steel, Temperature-Resistance 350 o C R 316L Stainless Steel, Steam Heat Tracking Type D 316L & 304 Stainless Steel, Electric Heating Tracing L 316L Stainless Steel H Hastelloy C22 T Special Requirement 0 None 1 18 VDC 36 VDC 2 85 VAC 265 VAC 3 Smart Power 4 Sensor 220 VAC; Transmitter 24 VDC A GB/T RF; Welding Neck Flange 4 MPa RF C GB/T RF; Welding Neck Flange 6.3 MPa RF E HG/T RF; Welding Neck Flange Class300 WN-RF F ASME B RF; Welding Neck Flange Class150 WN-RF G ASME B RF; Welding Neck Flange Class300 WN-RF I HG/T RF; Welding Neck Flange 4 MPa WN-RF T Special Request B DN 15 D DN 25 F DN 40 G DN 50 H DN 65 I DN 80 J DN 100
27 Accessory Electrical Connection Communication & Data Collection Methods Measurement Mode L DN 150 M DN 200 N DN 250 O DN 300 T As Requests 0 None 1 10m Cable 2 Carbon steel flange, bolt and nut, Metal gasket, 10m Cable 3 Stainless steel flange, bolt and nut, Metal gasket, 10m Cable 4 Carbon steel flange, bolt and nut, Metal gasket 5 Stainless steel flange, bolt and nut, Metal gasket 9 As requests W None M M20 N 1/2 NPT P 3/4 NPT G G 1/2 E G 3/4 T As request 0 None 1 Active circulation (4~20mA), Active frequency (0~10KHz), RS Active circulation (4~20mA), RS Active frequency (0~10KHz), RS Passive frequency (0~10KHz), RS Active circulation (4~20mA), Active frequency (0~10KHz), Passive HART 6 Active circulation (4~20mA), Active frequency (0~10KHz), Active HART 7 Passive frequency (0~10KHz), Active HART 9 As request G Custody Transfer / Fiscal Metering Type B Standard Measurement Type D Gas Measurement Type (Accuracy 0.35) Z Undefined
TRICOR. TRICOR Series. Technical Datasheet. Mass Flow Meters MISURATORE MASSICO - CORIOLIS MASS FLOW METER CORIOLIS TECHNOLOGY
Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass flow, volume flow, temperature and density and consequently can replace different
More informationTEK-B AR 3800E. Multivariable Pressure Transmitter. PRESSURE. Technology Solutions
Technology Solutions TEK-B AR 3800E Multivariable Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Bar 3800E is an
More informationMicro Motion LNG Series Meters
Product Data Sheet PS-002079, Rev B February 2018 Micro Motion LNG Series Meters Global industry standard for liquefied natural gas metering A complete, dedicated Coriolis meter solution for LNG dispensing
More informationVLM10 In-line Vortex Mass Flow Meter
VLM10 In-line Vortex Mass Flow Meter Description The VLM10 in-line vortex flowmeter measures process fluid flow by detecting the frequency at which vortices are shed from an obstruction in the process
More informationVersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 May 2009 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
More informationPressure transducers DMU 02 Vario (flush)
Process engineering (flush) Ideal for hygienic processes Connection technology with numerous versions Extremely resistant to shock, pulsation and vibration Best dynamic pressure resistance at high load
More informationTEK-B AR 3120B. Smart Gauge Pressure Transmitter. PRESSURE. Technology Solutions
Technology Solutions TEK-B AR 3120B Smart Gauge Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Bar 3120B Smart Gauge
More informationAPT3200 SMART PRESSURE TRANSMITTER. Range and Sensor Limits Refer to Table 1. Isolation Input/output isolated to 500Vrms (707 Vdc)
Range and Sensor Limits Refer to Table 1 Zero and Span Adjustment Limits Zero and span values can be set anywhere within the range limits stated in Table 1. Span must be greater than or equal to the minimum
More informationVersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
More informationCertified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters
www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass
More informationRHM80. High Flow Coriolis Mass Flow Meter. Features. Applications. Benefits
RHM80 High Flow Coriolis Mass Flow Meter Features Standard pressure ratings up to 341 bar (4946 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down to 0.15% Density uncertainty
More informationVersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
More informationTechnical Specifications and General Guidelines for Mass Flow Meters at Petroleum Oil Installations. Note:
Technical Specifications and General Guidelines for Mass Flow Meters at Petroleum Oil Installations Note: These are general specifications and guidelines for Mass Flow Meters for Petroleum Oil Installations.
More informationRHM60. Coriolis Mass Flow Meter with Uncompromising Performance. Features. Applications. Benefits
RHM60 Coriolis Mass Flow Meter with Uncompromising Performance Features Standard pressure ratings up to 490 bar (7107 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
More informationThermometer in stainless steel with vertical stem in stainless steel
Ed.18.01 Design Thermometer in stainless steel with in stainless steel 1.4571 Design EN 13190 Case diameter Dim 63, 100 eller 160 mm Accuracy Class 1,0% acc.to DIN EN 13190 Type Case Glass 5500 = case
More information602VFM MULTIVARIABLE VORTEX MASS FLOWMETER
MEASURE TODAY. ENSURE TOMORROW 602VFM MULTIVARIABLE VORTEX MASS FLOWMETER APPLICATIONS Steam, compressed air and gas for building facilities, hospitals, steam plants, power plants, steel plants, chemical
More informationOPTIMASS 7400 Technical Datasheet
OPTIMASS 7400 Technical Datasheet Sensor for mass flow The optimum meter for demanding applications A single straight measuring tube Choice of 4 tube materials The documentation is only complete when used
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
More information602VFM MULTIVARIABLE VORTEX MASS FLOWMETER
MEASURE TODAY. ENSURE TOMORROW 602VFM MULTIVARIABLE VORTEX MASS FLOWMETER APPLICATIONS Steam, compressed air and gas for building facilities, hospitals, steam plants, power plants, steel plants, chemical
More informationVersaFlow Coriolis 200 Sensor for Mass Flow Specifications
VersaFlow Coriolis 200 Sensor for Mass Flow Specifications 34-VF-03-12 June 2011 The Solution for Bulk Mass Flow Measurement The VersaFlow Coriolis 200 has been developed to meet the demanding transfer
More informationRUNYI GROUP. Main Features. STLU Vortex Flow Meter
STLU Vortex Flow Meter Main Features STLU Intelligent Vortex Flow Transducer is piezocrystal built in bluff body to avoid fluid turbulence caused by external type, no zero drift, and high reliability.
More informationElectromagnetic Flange Type BTU METERS. eflow 800H SERIES. Size DN10 to DN1200 DESCRIPTION APPLICATION FEATURES
DESCRIPTION eflow 800H series is flange type Electromagnetic Heat or BTU meter that can be used for measuring energy consumption in heating or cooling application for HVAC and other energy measurement
More informationCoriolis Mass Flow Measurement System promass 63
Technical Information TI 030D/06/en No 50068989 Coriolis Mass Flow Measurement System promass 63 Simultaneous measurement of mass, density and temperature for a broad range of applications For liquids
More informationData Sheet. Measuring System trikon Vortex Flow Meter EDZ 420 in Microprocessor Technology. Vortex meter trikon EDZ 420.
Data Sheet Measuring System trikon Vortex Flow Meter EDZ 420 in Microprocessor Technology Application Metering and recording of volume or mass flow of gases, liquids and steam. Vortex meter trikon EDZ
More informationPanaFlow MV82. Insertion Multivariable Flowmeter for Mass, Temperature, and Pressure. GE Sensing. Applications. Key Benefits
Key Benefits Multivariable vortex flowmeter for measuring volumetric flow, temperature, pressure, density, and mass flow using a single meter Advanced design and digital signal processing for vibration
More informationPlastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases
Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or
More informationMicro Motion TA-Series Flow and Density Meters
Product Data Sheet PS-002121, Rev B April 2018 Micro Motion TA-Series Flow and Density Meters Best fit for application Remote transmitters available to match installation mounting requirements All wetted
More informationMSP300 Pressure Transducer
SPECIFICATIONS Analog Output or 14-Bit Digital Pressure with 11-Bit Temperature Output One Piece Stainless Steel Construction Low Cost 17-4PH or 316L Stainless Steel Customizable FEATURES One Piece Stainless
More informationx act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationSTANDARD RANGES (ALL INTERMEDIATE RANGES ARE STANDARD) Range (psi) Range (Bar) Gage/Compound 0 to to to to to to t
SPECIFICATIONS Analog Output or 14-Bit Digital Pressure with 11-Bit Temperature Output One Piece Stainless Steel Construction Low Cost 17-4PH or 316L Stainless Steel Customizable FEATURES One Piece Stainless
More informationThe perfect fit for tight spaces
The perfect fit for tight spaces SITRANS FC410 - Performance that fits usa.siemens.com/coriolis Scan to be taken directly to our Coriolis web page. Answers for industry. High accuracy. Small wonder. Scan
More informationRosemount 1152 Alphaline Nuclear Pressure Transmitter
Product Data Sheet 00813-0100-4235 Rev BA Rosemount 1152 Rosemount 1152 Alphaline Nuclear Pressure Transmitter INDUSTRY LEADING PERFORMANCE Qualified per IEEE Std 323-1971 and IEEE Std 344-1975 Mild environment
More informationThermometer in stainless steel with capillary for mounting in thermowell or for direct mounting
Ed.17.02 Design Type Case diameter in stainless steel for mounting in thermowell or for direct mounting F73 Dim 100 mm or 160 mm Accuracy Class 1,0% DIN EN 13190 Case Glass Stainless steel with bayonet
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationF-2200 Series Steam Meter
F-2200 Series Steam Meter Vortex Mass Flow Meter for Saturated Steam Accurate cost effective mass flow measurement for saturated steam in a single instrument DESCRIPTION The F-2200 Series Steam Meter is
More informationx act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationPro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More informationTurbine Meter. P e
Turbine Meter P 402.003e Turbine Flow Meters Table of Contents Applications of the Turbine Meter RQ Series Page 3 Type RQ for Liquids Page 4 RQ Turbine Meter with UST Universal Transmitter Page 7 RQ Turbine
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up to 0... 0 bar Output signals
More informationPro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More informationPressure Transmitter STK136,STK136Q
SENSE Instruments CO., LTD. Production address: # 55 Chuanqiao RD.Jinqiao Export processing Industrial Zone Pudong New Area 20206 Shanghai China Telefon: +86(2) 585 0878 Telefax: +86(2) 5899 396 E-mail:
More informationThermometer in stainless steel with adjustable stem in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell
type stainless steel Ed.17.01 Design Thermometer in stainless steel in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell Type Design EN 13190 Case diameter Dim
More informationSentinel LNG. Panametrics Ultrasonic Flowmeter for Cryogenic Liquids. GE Sensing & Inspection Technologies. Benefits. Applications
GE Sensing & Inspection Technologies Sentinel LNG Panametrics Ultrasonic Flowmeter for Cryogenic Liquids Benefits Improved performance, reduced maintenance and dynamic flow measurement is now available
More informationSECTION Inline ULTRASONIC FLOW METERS
SECTION 40 71 66 Inline ULTRASONIC FLOW METERS PART 1- GENERAL 1.01 SUMMARY A. Ultrasonic flow meters for permanent in line installations. The meters shall utilize a transit time ultrasonic principle of
More informationD5100 Industrial Differential Pressure Transducer
316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections DESCRIPTION The
More informationD5100 Industrial Differential Pressure Transducer
316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections DESCRIPTION The
More informationTHE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES
THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES The manufacturer guarantees only English text. Available on our web site:
More information8.27/210 * 7.28/ / / /108. n x d. b f ML00343b. Dimensions are in inches/millimeters *8.86/225 for Pg 13.5 with adapter 2.
SITRANS P DSIII Pressure Transmitters All versions of the SITRANS P transmitter, DS III series, are smart two-wire transmitters The output signal is a load-independent direct current of 4 to 20 ma proportional
More informationD5100 Industrial Differential Pressure Transducer
316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) DESCRIPTION The D5100 series from Measurement Specialties sets the price
More informationSentinel LNG. Panametrics Ultrasonic Flowmeter for Cryogenic Liquids. GE Sensing & Inspection Technologies. Benefits. Applications
GE Sensing & Inspection Technologies Sentinel LNG Panametrics Ultrasonic Flowmeter for Cryogenic Liquids Benefits Improved performance, reduced maintenance and dynamic flow measurement is now available
More informationPOLYPROPYLENE SENSOR LIGHT WEIGHT SENSOR COMPLETELY IN POLYPROPYLENE
POLYPROPYLENE SENSOR LIGHT WEIGHT SENSOR COMPLETELY IN POLYPROPYLENE The manufacturer guarantees only English text. Available on our web site: www.isomag.eu INDEX TECHNICAL DATA... 3 OVERALL FEATURES...
More informationCoriolis Mass Flowmeter serving thousands of worldwide applications
RHM 08 - A standard Coriolis Mass Flowmeter serving thousands of worldwide applications The RHM 08 can measure flow rates up to 50 kg/min (110 lb/min) with temperatures in excess of 400 C and pressures
More informationD5100 Heavy Industrial Differential Pressure Transducer
316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) DESCRIPTION The D5100 series from Measurement Specialties sets the price
More informationLMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 40 cmh O up to 0... 00 mh O Output signals -wire: 4... 0 ma -wire: 0 0 V others on request
More informationMSP300 Pressure Transducer
OEM and End User One Piece Pressure Port Construction No O-Rings No Silicon Oil No Welds DESCRIPTION The MSP300 pressure transducer from the Microfused line of MEAS sets a new price performance standard
More informationCombiTemp TCR6 Standard RTD temperature sensor
CombiTemp TCR6 Main features Sensor and connection in stainless steel, ISI 316 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating
More informationOPTIMASS 7400 Technical Datasheet
OPTIMASS 7400 Technical Datasheet Sensor for mass flow The optimum meter for demanding applications A single straight measuring tube Choice of 4 tube materials The documentation is only complete when used
More informationBM SERIES COMPACT GUIDE WAVE GUIDED WAVE RADAR LEVEL INSTRUMENTS
GUIDED WAVE RADAR LEVEL INSTRUMENTS DESCRIPTION The microwaves impulses at high frequency travel through a stainless steel guide and they are reflected on the surface of the fluid to analyze. The period
More informationVersaFlow Coriolis 1000 Mass Flow Sensor Technical Datasheet. Specification. The superior solution. Highlights. Applications.
VersaFlow Coriolis 1000 Mass Flow Sensor Technical Datasheet 34-VF-03-03 29 th May, 2009 Specification The superior solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight
More informationFISHERMETER. Swirl flowmeter FVST4. liquid gas steam
Swirl flowmeter FVST4 liquid gas steam Contents 1 Characteristics 2 2 Measurement principle 2 3 Technical parameter 3 4 Installation 4 5 Dimensions 10 6 Meter size and flow range 11 7 Flowmeter selection
More informationSITRANS F X SITRANS F. Answers for industry. Vortex flowmeter The optimum measurement device for steam, gases and liquids
SITRANS F X Vortex flowmeter The optimum measurement device for steam, gases and liquids SITRANS F Answers for industry. Totally integrated solutions from a single supplier Industry segments: Chemical
More informationLiquid level switch BW 17
KROHNE 09/2001 7.02369.21.00 GR/PRINTO Liquid level switch Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level
More informationSERIES OVAL GEAR FLOWMETER MOGF
SERIES OVAL GEAR FLOWMETER MOGF Fluidex series MOGF is a Positive Displacement Flow Meter with medium capacity. The meters have two rotating gears in oval-shape. A fixed amount of the liquid passes between
More informationIntrinsically Safe Industrial Measuring Probes for Humidity, Temperature, and Derived Variables
Data Sheet 907025 Page 1/12 Intrinsically Safe Industrial Measuring Probes for Humidity, Temperature, and Derived Variables The hygrothermal transducers measure the relative air humidity and temperature
More informationTSK S 3. Flap Flowmeter for liquids. Range: m 3 /h. Accuracy: ± 2.0 of reading. : PN 40, t max: C. p max
Flap Flowmeter for liquids measuring monitoring analysing TSK Range: 0.5-3.5 200-1500 m 3 /h Accuracy: ± 2.0 of reading p max : PN 40, t max: -40 +300 C Connection: wafer flange DN 25 500 Material: stainless
More informationMicro Motion Technical Overview and Specification Summary
Product Data Sheet PS-00232, Rev. K April 2011 Micro Motion Technical Overview and Specification Summary Emerson s world-leading Micro Motion Coriolis flow and density measurement devices have set the
More informationSPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE C20 C21 C26-2 C26-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration
More informationf=sr.v/d Thereinto f----fre quency of Karman Vortex shedding Sr----Strouhal number v----velocity d----width of column object
STLU Vortex Flowmeter 1. Working Principle 1 When a column body placed in flowing fluids in pipe, a series of vortices will be generated alternately on each side of the object as shown as below, these
More informationLIQUID METER TYPE FMO
LIQUID METER TYPE FMO INNOVATORS IN FLOW TECHNOLOGY FLUX LIQUID METER TYPE FMO OVAL ROTOR DESIGN FLUX liquid meters type FMO are positive displacement flowmeters according to the oval rotor design. They
More informationILMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
ILMK 8 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 40 cmh O up to 0... 00 mh O Output signals -wire: 4... 0 ma
More informationMicro Motion H-Series Hygienic Mass, Density, and Volume Meter
Product Data Sheet PS-00599, Rev. C April 2006 Micro Motion H-Series Hygienic Mass, Density, and Volume Meter With MVD Technology Mass flow accuracy to ±0.10%, volume flow accuracy to ±0.15%, and density
More informationVersaFlow Coriolis 200 Sensor for Mass Flow Technical Datasheet. Specification. The solution for bulk mass flow measurement. Features.
VersaFlow Coriolis 200 Sensor for Mass Flow Technical Datasheet 34-VF-03-12 October 2009 Specification The solution for bulk mass flow measurement The VersaFlow Coriolis 200 has been developed to meet
More informationFN04. Liquid level sensor with continuous detection. Level Measurement and Monitoring
Level Measurement and Monitoring FN04 Liquid level sensor with continuous detection Level measurement unaffected by foam formation, conductivity, pressure or temperature Remote indication over very long
More informationDML-Series. Pelton wheel flow meter
DML-Series Pelton wheel flow meter Flow meter manufacture As a specialist in flow measurement technology, TrigasDM supplies high-quality measuring instruments, electronics and calibrators for liquids and
More informationTSK. Flap Flow Meter for Liquids. Range: m 3 /h Accuracy: ± 2.0 of reading p max
Flap Flow Meter for Liquids measuring monitoring analysing TSK Range: 0.5-3.5 200-1500 m 3 /h Accuracy: ± 2.0 of reading p max : PN 40, t max: -40 +300 C Connection: wafer flange DN 25 500 Material: stainless
More informationFlowmeters. Positive Displacement meter. Coriolis mass flowmeter. Turbine flowmeter. Ultrasonic flowmeter
The Satam range is used for the custody transfer measurement of liquid hydrocarbons, liquid gas and liquid chemicals. Consisting of four distinct families, the range is able to meet the needs of most industrial
More informationSI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application:
SI-02 Electromagnetic Flowmeter for General Applications Description: Features / Universally applicable / Separate or compact measuring transmitter / Variety of lining material / DN15 to DN2000 / DIN-
More informationTRICOR Series TCM Coriolis Mass Flow Meters. Technical Datasheet
TRICOR Series Coriolis Mass Flow Meters Technical Datasheet TRICOR - Coriolis Mass Flow Meters Description The TRICOR Coriolis Mass Flow Meters from TASI Flow are absolutely reliable and robust sensors
More informationDiaphragm pressure gauge
Diaphragm pressure gauge with switch function, NS 00/60,Type series BE2 Features Diaphragm pressure gauge with switch function High quality case with bajonet ring NS 00/60 per EN 837-3 S, alternative safety
More informationSITRANS P measuring instruments for pressure
Overview Supplementary electronics for 4-wire connection Structural design Dimensions (W x H x D) in mm (inch) Electrical connection 80x10x60 (3.15x4.7x.36) Screw terminals (Pg 13.5 cable inlet) or Han
More informationCH88 In Situ Flue Gas Oxygen Transmitter
CH88 Combustion Flue Gas Oxygen Analyzer System CMB-PDS-CH88 Product Data Sheet September 2017 CH88 In Situ Flue Gas Oxygen Transmitter World-Class TM performance Outstanding accuracy ±1% full scale 1056
More informationTUFFy T3. side Mounting level controls. Worldwide level and flow solutions. compact and cost effective. FeATUres. ApplicATions 2014/68/EU
TUFFy T3 side Mounting level controls Tuffy liquid level switches are float actuated devices designed for horizontal mounting in a tank or vessel through threaded or flanged pipe connections. The compact
More informationGas Sample Probe Series SP
Embracing Challenge Gas Sample Probe Series SP Version SP3110V and SP3110 for sampling from zones with explosive gas with different options for calibration gas feeding, back purging and shut-off SP3110V/RS/HE4-135
More informationModel 140MX Flowmeter Functional Overview
A higher level of performance Model 14MX Flowmeter Functional Overview DESCRIPTION The Model 14MX Flowmeter (Figure 1) works on the fluid phenomenon of momentum exchange (see page 6 for details), providing
More informationPRODUCT INFORMATION. Model 140MX Flowmeter Functional Overview. PI 14-1 Rev: 1 March 2002
PRODUCT INFORMATION Model 14MX Flowmeter Functional Overview PI 14-1 Rev: 1 March 22 DESCRIPTION The Model 14MX Flowmeter (Figure 1) works on the fluid phenomenon of momentum exchange (see page 6 for details),
More informationU6 SERIE PRINCIPLE TECHNICAL FEATURES. Measuring range: 1 to 1600 m 3 /h [Water at 20 C] 180 to Nm 3 /h [normo m 3 /h of air] MATERIALS
ORIFICE PLATE FLOW INDICATOR U6 SERIE - Mounting in all positions - Construction: cast iron or stainless steel - For pipes from ND 40 up to ND 300 mm - Scale amplification from 2 to 10 - Accuracy: ± 2.5
More informationRHM 100. Coriolis Mass Flowmeter for High Flow Applications. Applications. Features. Advantages
RHM 100 Coriolis Mass Flowmeter for High Flow Applications The RHM 100 can measure up to 720 t/hr with the superior and patended Omega shape meter technology manufactured by rheonik, the mass flowmeter
More informationRosemount 405 Compact Primary Element
September 2014 Rosemount DP Flow Rosemount 405 Compact Primary Element Rosemount 405 Compact Primary Element utilizes an easy to install direct mount primary element assembly. Available with Conditioning
More informationGilflo flowmeters. for steam, liquids and gases
Gilflo flowmeters for steam, liquids and gases The Gilflo spring loaded variable area flowmeter... offers an unrivalled 1:1 turndown and can be used to meter most industrial fluids including steam and
More informationSmartScanTM. SolidScan You Can Measure the Solid Benefits. Ultrasonic Continuous Level Measurement of Liquids and Solids
SmartScanTM Ultrasonic Continuous Level Measurement of Liquids and Solids Automatic adaptation to virtually all environments Radar-like performance at an affordable price Superior reliability and accuracy
More informationContinuous Level Sensor CONDURIX 31.1
Continuous Level Sensor CONDURIX CONDURIX The Continuous Measurement of Filling Levels according to the Potentiometric Measuring Principle The CONDURIX Sensor supplies information on filling levels of
More informationMicro Motion H-Series Hygienic Coriolis Flow and Density Meters
Product Data Sheet PS-00599, Rev O January 2019 Micro Motion H-Series Hygienic Coriolis Flow and Density Meters High accuracy real world performance Best-in-class performance on liquid mass flow, volume
More informationTemperature Measurement
Technical description Design A resistance comprises the measuring resistor (metal; platinum, Pt or nickel, Ni) and the mounting and connection parts required in each case. In the standard version, the
More informationVERIS Accelabar. Superior Flow Measurement Accuracy
VERIS Superior Flow Measurement Accuracy Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit for up-to-date information. ...A New Idea in Flow
More informationCATALOG HHD ELECTROMAGNETIC FLOWMETER
HHD ELECTROMAGNETIC FLOWMETER DESCRIPTION OF PRODUCTS Electromagnetic flowmeter is a kind of inductional instrument designed by Faraday s law of electromagnetic induction to measure flow of conductive
More information