IPS e.max Press lise / Version 2. I hot Sheet No Ivoclar Vivadent AG, Bendererstrasse 2, FL Schaan

Transcription

1 Material Safety Data Sheet IPS e.max Press lise / Version 2 I hot Sheet No $n $v**$*:r ". vfr'u#d#n*- Page I of5 Company Ivoclar Vivadent AG, Bendererstrasse 2, FL Schaan Principal ity of Liechtenstein I 1.1 Commercial product name and supplier Comrnercial product name / Designation IPS e.max PfeSS NFPA v 1.2 Application / Use 1.3 Producer 1.4 Supplier Hour Emergency Assistance General MSDS Assistance Press ceramic ingot Ivoclar Vivadent AG, Bendererstrasse 2,9494 Schaan Principality of Liechtenstein (FL) Ivoclar Vivadent, Inc. 175 Pineview Drive, Amherst NY 14228,tJlA 2785 Skymark Ave., Unit I Mississagua, ON L4W4y3, Canada MSDS prepared by Andejeet Gulati. Te[. No Emergency-Call USA- Infotrac: Emergency-Call Canada - Canutec: US: I Canada: I Composition 2.1 Chemical characterization 2.2 Hazardouscomponents Ceramic ingots made of:>57%o SiO2, Li2O, K2O,P2O5,ZrO2,ZnO, Al2O3, MgO, La2O3 and pigments 2.3 Furtherinformatron Hazards identification Grinding dust (see 8.3.1). 4 First aid measures 4.1 Eye contact 4.2 Skin contact 4.3 Insestion No specifi c recuirements.

2 '1 Material Safety Data Sheet Date of printi 4.4 Inhalation 4.5 Furtherinformation IPS e.max Press lise i Version 2 I hot Sheet No No specifi c requi rements..44*a lie }VffiEHT tftrleflfid#n ' Page 2 of5 5 Fire-fighting measures 5.1 Suitable extinguishing media 5.2 Extinguishing media to avoid 5.3 Flash point 5.4 lgnitiontemperature 5.5 Explosion limits 5.6 Furtherinformatron Not combustible. Lower: Upper: Test method: Accidental release measures Clean up mechanically. Dispose of according to local and national regulations Handling and storage Handling Only adequately trained personnel should handle this product. Keep out ofreach ofchildren. 7.2 Industrial hygiene 7.3 Storage Usual hygienic measures for dental practice. When using, do not eat, drink or smoke. Store in a dry place. 7.4 Place of storage 7.5 Fire-andexplosion-protection 8 Exposure controls / Personal 8.1 Technical measures 8.2 Control of threshold limits protection Provide adequate local ventilation. None established. 8.3 Personal protective equipment 8.3. I Respiratory protection Hand protection Avoid breathing dust. Respiratory Protection. Avoid inhalation of dust while grinding. In dusty atmospheres, use an approved dust respirator. Not required.

3 Material Safety Data Sheet Date of printin Eye protection Other IPS e.max Press lise / Version hot Sheet No Eye protection should not be necessary.."o t n o n *vfie n#r vrv#d#ffif' Page 3 of5 9 Physical and chemical properties 9.1 Appearance 9.2 Colour 9.3 Odour 9.4 Change of physical state 9.5 Density 9.6 Vapour pressure Ingot tooth shaded odourless not known Test method: 9.7 Viscosity 9.8 Solubility Solubility in water non soluble 9.9 ph 9. l0 Further information l0 Stability and reactivity l0.l Thermal decomposition lr0.2 Hazardous decomposition 10.3 Hazardousreactions 10.4 Further information products l1 Toxicologicalinformation I1.1 Acute toxicity This product is not hazardous according to EEC criteria.

4 Material Safety Data Sheet IPS e.max Press lise / Version 2 I hot Sheet No oo"tn* ir!v0e lfir v*v#dsn*- Page 4 of Subacute / Chronic toxicitv Further information No adverse effects anticipated by this route ofexposure incidental to proper industrial handling. t2 Ecological information No ecologicalproblems to be anticipated if properly handled and used. non soluble t3 Disposal considerations Take to an approved landfill or a waste incineration plant, under conditions approved by the local authority. l4 Transport information 14.1 Transport at land ADR RID 14.2 Transport at sea ADNR Kemler Number IMDG 14.3 Air transport Passenger airplane EMS ICAO / IATA-DGR Subsidiary Risk Labels Packing Instructions MFAG Cargo Airplane max. Packing Instructions 14.4 Further information max. Product is not classified as a dangerous good for transport. l5 Regulatoryinformation The product is a medical device according to the EC-directive 93l42 EEC. This product is classified as a medical device under US and Canadian regulations and has been reviewed by the US Food and Drug Administration and Health Canada. This product does not require classification as Dangerous Goods National regulations

5 Material Safety Data Sheet IPS e.max Press ** u * * * n Date of printi 15.2 NFPA Storage I Further information lise / Version 2 hot Sheet No iv*elgr." vtvfid*fti' e5of5 l6 Other information Version:2 Changes: 1.5 The above mentioned data correspond to our present state ofknowledge and experience. The safety data sheet serves qs description ofthe products in regard to necessaty safety measures. The indications do not have lhe meaning of guarantees on properties. This safety data sheet has been generated with the safety ASSiST Applied Software Solutions in Science and Technology AG, Weiheryeg i. CH-4104 Obemil. Switzerlild

6 EU Safety Data Sheet hot IPS e.max Ceram Sheet No tvsf vrv{tdan{" 'f,r Page 1 of5 Company Ivoclar Vivadent AG, Bendererstrasse 2, FL Schaan Principal ity of Liechtenstein I Commercial product name and supplier 1.1 Commercial product name I IPS e.max Cefam Designation 1.2 Application / Use Ceramic I.3 Producer 1.4 Supplier Veneering materials: Dentin, Deep Dentin, Occlusal Dentin, Margin, Incisal Edge, Transpa Incisal, Special Incisal, Transpa, Cervical Transpa, Opal Effecto Mamelon Add on materials: Dentin, lncisal, Margin ZirLiner lvoclar Vivadent AG, Bendererstrasse 2, FL Schaan Fiirstentum Liechten stein 1.5 TOX emergency number Emergency-C all: +423 I or Ivoclar Vivadent AG, FL-9494 Schaan. Liechtenstein 2 Composition 2.1 Chemical characterization Ceramic powder made of > 50yo SiO2, CaO, Al2O3, CeO2, Na2O, K2O, B.2C3, ZnO, F,Li2O, ZrO2, P2O5, SrO, TiO2 and pigments 2.2 Hazardous components 2.3 Further information 3 Hazards identification Dust generation. Avoid breathing dust. Grinding dust (see 8.3.1). 4 First aid measures 4.1 Eye contact 4.2 Skin contact 4.3 Ingestion 4.4 Inhalation 4.5 Furtherinlormation Flush eyes with plenty of water; mechanical effects only. Take into fiesh air.

7 EU Safety Data Sheet hot IPS e.max Ceram Sheet No hs iv*elsr ". vru{tdsfrl- Page 2 of5 5 Fire-fighting measures 5.1 Suitable extinguishing media not combustible 5.2 Extinguishing media to avoid 5.3 Further information 6 Accidental release measures Clean up mechanically. Dispose of according to local and national regulations. 7 Handling and storage 7.1 Handling Only adequately trained personnel should handle this product. Keep out ofreach ofchildren. 7.2 Industrial hygiene Usual hygienic measures for dental practice. When using, do not eat, drink or smoke. 7.3 Storage Store in a dry place. 7.4 Place of storage 1.5 Fire- and explosion-protection Not required. 8 Exposure controls / Personal protection 8.1 Technical measures Provide adequate local ventilation. 8.2 Control of threshold limits Grinding dust: Producer Industry recommends an exposure limit of 1.5 mg/m Personal protective equipment Respiratory protection In dusty atmospheres, use an approved dust respirator. Avoid dust build-up Hand protection Not required Eye protection Safety goggles Other 9 Physical and chemical properties 9.1 Appearance 9.2 Colour 9.3 Odour 9.4 Change of physicalstate powder diflerent odourless Test method:

8 EU Safety Data Sheet 9.5 Density IPS e.max Ceram hot Sheet No Page 3 of5 not known 9.6 Vapour pressure 9.7 Viscosity 9.8 Solubility Solubility in non soluble 9.9 ph 9.10 Flash point 9. ll lgnition temperature 9.12 Explosion limits 9. I 3 Further information l0 Stability and reactivity l0.l Thermal decomposition Lower: Upper: 10.2 Hazardous decomposition products 10.3 Hazardous reactions 10.4 Further information I I Toxicological information I I.l Acute toxicity This product is not hazardous according to EEC criteria. 11'2 Subacute / Chronic toxicity No adverse effects anticipated by this route of exposure incidental to proper industrial handl in g. I 1.3 Further information l2 Ecological information No ecological problems to be anticipated if properly handled and used. non soluble

9 EU Safety Data Sheet hot IPS e.max Ceram Sheet No. 1608,* o o o * iv*clcr ", vru{ld#nl' Page 4 of5 l3 Disposal considerations Take to an approved landfill or a waste incineration plant, under conditions approved by the local authority. 13.I EU waste key l4 Transportinformation 14.1 Transport at land ADR RID 14.2 Transport at sea ADNR Kemler Number IMDG 14.3 Air transport Passenger airplane EMS ICAO / IATA-DGR Subsidiary Risk Labels Packing Instructions MFAG Cargo Airplane max. Packing Instructions 14.4 Further information max. Product is not classified for any mode of transportation. l5 Regulatory information l5.l UN number 15.2 National regulations The product is a medical device according to the EC-directive 93l42 EEC. -l5.3 EU number 15.4 Hazard syrnbols 15.5 Hazarddesignation

10 EU Safety Data Sheet 15.6 Risk phrases 15.7 Safety phrases 15.8 MAK value 15.9 BVD classification (CH) vbf (D) l5.l I Further information IPS e.max Ceram hot Sheet No ** o o '. tvoctflr vtv$d#n{' Page 5 of5 16 Other information Version: I The above mentioned data correspond lo our present state ofknowledge and experience. The sdee data sheet serves as description ofthe products in regard to necessary safety measures. The indications do not have the me aning of guarant e es on pr op ert i es. This safety data sheet has been generated with the safety database'chemmanager,. O ASSiST Applied Software Solutions in Scienre and Technoiogy AG, Weihemeg 3, CH-4104 Obemil. Switzerland