5 DRUM MOTOR UNIT HANDLING Product description The drum motor 16LS is able to provide high torques and withstand high radial loads. Characteristics Salt water resistant aluminum bearing housing Induction motor three phases alternating current Dual power supply Integral motor protection Steel- hardened helical spur gear Low noise operation Maintenance free Lifetime lubrication Reversible operation Applications Conveyors for heavy and frequent use Logistics applications Airport and postal conveyors Warehouse loading conveyors Telescopic conveyors Agricultural plants Manufacturing of food processes Modular belts, steel or plastic applications Dry, damp and frequent wash applications TECHNICAL DATA Motor Data Type of Motor Asynchronous squirrel-cage, IEC 4 (VDE 050) Insulation class of motor windings Class F, IEC 4 (VDE 050) Derated windings (0% power reduction) On request for applications without belt Voltage 0/400 V ± 5% (IEC 4/8) Special voltage on request Frequency 50/60 Hz Internal shaft sealing system Double-lipped FPM or nitrile rubber, NBR Protection rate IP66 Thermal protection Bimetallic Contact Ambient temperature, -phase motor -5 to +40 C General technical data Max. Roller length (RL) 1800 mm All data and values declared in the catalogue refer to operation with a frequency of 50 Hz.
16LS SERIES 5 LIGHT INDUSTRIAL Materials The following drum motor components are available in different versions, as shown in the below chart, with further options for the material type as indicated. Components Version Shell End housing Shaft Electrical connection Material Aluminium Steel Stainless Steel Brass /Nickel Polymer Crowned Std TS8N Cylindrical Std TS8N Cylindrical + key (for sprockets) Std TS8N Special crowns and grooves Std TS8N Standard Std TS8N With V-grooves Std TS8N With O-grooves Std TS8N With chain sprockets Std TS8N Standard Std TS8N Cross-drilled and threaded, M10 Std TS8N Straight connector TS8N Std Elbow connector TS8N Std Terminal box Std TS8N INDUSTRIAL OPTIONS Please contact Rulmeca for further versions. TS8N Version - End Caps in stainless steel with PTFE lip seals. Options Rubber Lagging for standard belts Profi led lagging for plastic modular belts Profi led lagging for thermoplastic belts Sprockets for plastic modular belts Backstop / Anti run-back bearings Electromagnetic brake Rectifi ers Encoder Food-grade Oil (EU, FDA and USDA) Non-horizontal mounting (more than ± 5 ) Dual speed motor Version TS7N - as TS8N but with re-greasable labyrinth seals Note The combination of encoder and electromagnetic brake is not possible. Accessories Mounting brackets Idler Pulleys Rollers for conveyors Frequency Converters ACCESSORIES PLANNING SECTION
54 DRUM MOTOR UNIT HANDLING TECHNICAL DATA - PHASE - 50HZ - STANDARD P N [kw] (rpm) I f [A] gs i V A V N n A [min -1 ] M N [Nm] F T TE RL 75.0 0.07 0.07 6 1 1475 0.11 0.7 0.75 1.10 1 (470) 6 (90) 4 (175) 6 (945) 4 (1405) 4 (140) (80) 1.7/0.98.5/1.5 1.9/1.1 61.56 0.09 0.09 8 100 110 49.75 0.11 0.11 9 81 978 7.9 0.14 0.14 1 61 746 4.65/.7.5/.0 4.7/.7 4.1/.5 75.0 0.14 0.14 1 09 55 61.56 0.17 0.16 15 171 080 49.75 0.1 0.0 18 18 1681 61.56 0.5 0.5 115 191 49.75 0.1 0. 8 9 115 7.9 0.41 0.40 6 71 857 0.05 0.5 0.50 46 56 679.76 0.65 0.6 58 44 57 19.0 0.81 0.80 7 6 44 14.64 1.06 1.10 94 7 1 11.60 1.4 1.5 119 6 60.6 0.18 0.18 16 404 46. 0. 0.0 0 54 08 61.56 0.6 0.5 7 760 49.75 0. 0. 8 184 1 7.9 0.4 0.40 7 140 1701 0.05 0.5 0.50 47 111 147.76 0.67 0.6 59 88 1065 19.0 0.8 0.80 7 71 861 14.64 1.09 1.10 96 54 656 11.60 1.7 1.5 11 4 50 61.56 0.6 0.5 0 4006 46. 0.5 0. 1 48 008 7.9 0.4 0.40 7 0 468 61.56 0.5 0.50 46 166 010 49.75 0.64 0.6 57 14 164 7.9 0.84 0.80 75 10 18 0.05 1.07 1.10 94 81 981.76 1.5 1.5 119 64 776 19.0 1.67 1.60 147 5 67 14.64.19.00 19 9 478 11.60.76.50 44 1 79 9.4.9.15 00 5 08 19000 max 000 19000 max 000 min 500 max 000 max 000 max 000 max 000
16LS SERIES 55 LIGHT INDUSTRIAL TECHNICAL DATA - PHASE - 50HZ - STANDARD P N [kw] 1.50.0 (rpm) (850) (860) I f [A] 5.8/.5 8.15/4.7 gs i V A V N n A [min -1 ] M N [Nm] F T 75.0 0.4 0.40 8 7 17 61.56 0.5 0.50 46 4 7 46. 0.70 0.6 6 168 044 7.9 0.85 0.80 75 18 1677 0.05 1.07 1.10 95 109 19.76 1.6 1.5 10 87 1050 19.0 1.68 1.60 148 70 849 14.64.0.00 195 5 647 11.60.78.50 46 4 51 9.4.4.15 0 4 417 7.80 4.1 4.00 65 8 45 46. 0.70 0.6 6 46 987 7.9 0.85 0.80 75 0 451 0.05 1.08 1.00 95 160 194 4.4 1. 1.5 117 10 1579 0.1 1.60 1.60 14 108 106 14.64.1.00 195 78 946 11.60.79.50 47 6 750 9.4.4.15 0 50 609 7.80 4.15 4.00 67 4 504 TE 7100 INDUSTRIAL OPTIONS ACCESSORIES PLANNING SECTION 7100 RL max 000 min 40 max 000 P N rpm I f gs i V A V N n A Nominal mechanical power Number of poles Actual rotor rpm at full load Amperage (0/400V) at full load Gear stages Gear ratio Theoretical actual belt (tangential) speed at full load* Nominal belt (tangential) speed Revolutions of shell at full load* M N Nominal Torque at full load F T Belt pull (tangential force) on shell at full load* TE Maximum allowable belt tension (radial load) RL Reference length Valid for unlagged shells / values can deviate at partly or no load conditions
56 DRUM MOTOR UNIT HANDLING Standard weight data drum motors & idlers 16LS P Standard weight [kg] for standard RL N [kw] 50 400 450 500 550 600 650 700 750 800 850 900 950 1000 0.11 1 --- 8.5 41.5 44.5 47.5 50.5 5.5 56.5 59.5 6.5 65.5 68.5 71.5 74.5 0.7 0.75 6 --- 9.5 4.5 45.5 48.5 51.5 54.5 57.5 60.5 6.5 66.5 69.5 7.5 75.5 4 4.5 7.5 40.5 4.5 46.5 49.5 5.5 55.5 58.5 61.5 64.5 67.5 70.5 7.5 6 --- 4.5 45.5 48.5 51.5 54.5 57.5 60.5 6.5 66.5 69.5 7.5 75.5 78.5 4 --- 40.5 4.5 46.5 49.5 5.5 55.5 58.5 61.5 64.5 67.5 70.5 7.5 76.5 1.10 4 --- 4.5 46.5 49.5 5.5 55.5 58.5 61.5 64.5 67.5 70.5 7.5 76.5 79.5 --- 4.5 45.5 48.5 51.5 54.5 57.5 60.5 6.5 66.5 69.5 7.5 75.5 78.5 1.50 --- 4.5 46.5 49.5 5.5 55.5 58.5 61.5 64.5 67.5 70.5 7.5 76.5 79.5.0 --- 46.5 49.5 5.5 55.5 58.5 61.5 64.5 67.5 70.5 7.5 76.5 79.5 8.5 idler - 1.5 14 15.5 17 18.5 0 1.5 4.5 6 7.5 9 0.5
16LS SERIES 57 LIGHT INDUSTRIAL Standard shaft INDUSTRIAL Drum motor with terminal box in aluminium Drum shell shape ØA ØB Crowned 16.0 14.5 Cylindrical 16.0 16.0 Shaft dimension Width across flats H K C Ø40mm 0 0 45 45 PLANNING SECTION OPTIONS ACCESSORIES Straight connector in brass or stainless steel Elbow connector in stainless steel Elbow connector in aluminium Cable connector 90 with threaded shaft Cross-drilled and threaded shaft Terminal box in stainless steel