An Intensive 5 Day Training Course Advanced Well Integrity Management 22-26 Oct 2017, Dubai 20-JUN-17 This course is Designed, Developed, and will be Delivered under Iso Quality standards
Advanced Well Integrity Management Why Chse this Training Course? The Well Integrity Forum (WIF) was established in 2007 and one of the main issues that were initially brought up for review was well-integrity training. WIF members acknowledge a need for well-integrity training of key personnel working with well integrity offshore and onshore. This 5-day training course is designed to provide the participants with knowledge to deeply investigate the faultier and risk of well integrity. The participants have an excellent chance to share ideas and to correct the concept of well integrity management. This advanced training course will discuss the proper approach to decisionmaking to provide certainty within the organization. The knowledge and skills to make critical decision throughout well life cycle is vital, not only for WIM purpose but as well as for economic value. This PetroKnowledge course will focus on the Well Integrity management systems and interfaces with other teams in the organization. Integrity barriers are defined, Well Failure model and how to establish one is discussed, as well how to create an efficient well integrity organization. The training course will deepen your knowledge of well integrity management, and develop the skills for designing, operating, and maintaining well equipment with the ultimate objective of ensuring a permanent, safe containment of all wellbore fluids. This training course will feature: The concept of Well Integrity Awareness of regional Standards and Regulations Different stages of well operations from Design and Construction, to Production Impact Well Integrity Risks associated with different types of well integrity issues Different techniques to reduce / mitigate risks Procedures, roles and responsibilities of personnel involved in the well lifecycle towards Well Integrity The focus on key areas of well integrity assurance The Production supervisor s duties with regard to well integrity Who is this Training Course for? This PetroKnowledge course is suitable to a wide range of professionals but will greatly benefit: Affiliate Technical Directors Asset Manager Petroleum Engineers Production Technologists Production Personnel (Production Operators, Maintenance Supervisors) Drilling and Well Servicing Personnel (Drilling Manager, Drilling/Well Engineers, Completion and Well Service Engineers, Drilling Supervisors, Rig Manager, Tlpusher, Drillers) How will this Training Course be Presented? This training course will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative. www.petroknowledge.com
Daily Agenda What are the Goals? This training course aims to: Improve the delegates appreciation of the well design and annulus construction; i.e. the well as a pressure vessel Provide knowledge & understanding of the guidelines and standards that when observed and implemented effectively will ensure well integrity Establish an increased awareness of well integrity issues and how they are controlled / managed and by whom Provide knowledge of how to maintain equipment for safe and effective operation By the end of this training course, participants will be able to: Identify well problems from available well data Understand guidelines, procedures and standards Appreciate design intent of completion equipment and their impact on well integrity Be conversant in the care and operation of surface intervention equipment Day One: Fundamentals of Well Integrity and Detection of Problems Definition of the various components of the well and showing the integrity barriers Designing Integrity in Wells-Completion Design-Life expectancy Influences on Well Integrity and why it needs managing Preventive maintenance reduces operating cost and optimizes production Maintenance Processes and Differences External well integrity maintenance Internal well integrity maintenance Ways of losing well integrity Technology & tls for internal well integrity diagnostic & monitoring PLT Logging Techniques Securing internal integrity, reservoir reconciliation, leak detection etc. Establishes tubing base line wall thickness and corrosion over life cycle of the well Non-intervention less investigations like Pressure testing Detects leaks Production profile Advanced Well Integrity Management
Membership No.: 125094 Day Four: Well Integrity & Barrier Philosophy and How Testing is Done Day Two: How to Prevent Catastrophic Failure of a Well caused by External and Internal Corrosion Risk to the completion string from internal sources Barrier understanding Show different types of wells Monitor for and understand mechanical integrity problems preventing potential production rates Sand removal Impact of Paraffin s and Asphltien on well integrity How to treat these problems in a proper ways? How to execute scale removal Cement squeeze for water and gas shut off Day Three: Consequences of Loss of Integrity of One Well to its Surrounding Wells and Potential Financial Exposure Group Exercise: Evaluating Well Integrity, Annular pressure management Increasing amount of Underground blowouts Abandonment: Temporary and permanent QuAlIty CertIfICAtIon Member of Clear Concepts. Clean Environment. Well Failure Model - How to arrive at the document Group Exercise Referring to the barriers discussed above, make a plan to test and verify the barriers Leak rate determination calculations Risk Based Well Integrity Management and Testing The management of Barrier testing Discuss testing methods of the barriers in the well Failure Mode and Effects Analyses Diagram (real case document) Show barriers, function and its severity in case of failure Discuss testing and managing the data Provide systems and procedures, which ensure that the integrity of the well is assured Ensure that the well is maintained with reference to appropriate procedures and specifications Ensure that the risks of operating the well are as low as reasonably practicable Basis for the development of asset-specific well maintenance and integrity standards, policies, procedures and performance targets Day Five: Optimize Well Completion to Optimize Well Integrity during the Lifespan of the Wells, based on life time and possible Intervention Frequencies Assessments How to build an organization with sufficient Well Integrity competence and capability Understanding of lowest unit cost, as opposed to cheapest Competent staff Example of Well Head Maintenance Manual Real Life Documents used and handed-out during the course Well Failure Model Failure Modes and Effect Analyses Risk Based Well Maintenance Well Hand Over Form Well Head Check Sheet Case History Wrap-up of the class and evaluation The PMI Registered Education Provider logo is a registered mark of the Project Management Institute, Inc. Advanced Well Integrity Management
Advanced Well Integrity Management Course Dates, Venues and Fees 22-26 Oct 2017 Dubai $4,500 This fee is inclusive of Documentation, Lunch and Refreshments Please use BLOCK CAPITALS to fill in this form. It is important that you read carefully through all information before starting to complete the form. Registration Details Family Name: First Name (Mr./Ms.): Position: Company: Mailing Address: Telephone: Mobile: Fax: Email: Authorisation Authorisation By: Position: Company: Mailing Address: Telephone: Mobile: Fax: Email: In-house Training Maximize your training budget and have several members of your staff, who require specific training, to attend with the advantage of not incurring additional travel costs when attending a public training courses & seminars. Would you like a PetroKnowledge training course delivered at a time or location to suit you? Would you like PetroKnowledge to tailor a course from our comprehensive library of programmes? Or would you like us to create an entirely new, bespoke course to suit the exact needs of your organisation? Working in partnership with our clients, PetroKnowledge provides an enjoyable, creative learning experience that enables participants to develop their skills and knowledge. We can deliver not only generic, off-the-shelf courses from our extensive learning portfolio, but we can provide tailored as well as bespoke learning on any aspect of skill development or knowledge. Our in-house courses are conducted by the same expert trainers who conduct PetroKnowledge public courses so you can be assured they will fulfill the learning objective of any organisation
Bking Terms & Conditions Bking Bkings for courses can be made via our website (petroknowledge.com) or by contacting our Registration Desk on +971 2 5577389 or at reg@petroknowledge.com For on-line bkings, please select the course that you require and click on the Register Now button, following the instructions step by step Upon receipt of bking in order, enrollment on the respective training course will be confirmed by Registration Team with all necessary documentation Invoicing and Payment Our fees include course presentation, relevant materials, physical & digital documentation, lunch and refreshments served during entire training. Accommodation charges are not included in the course fees Course fees are payable upon bking unless a valid, authorized Purchase Order is provided and accepted Invoices will be sent via email/courier to the ID/name and address provided We prefer to have the fees payment in our account before the start of training course. However, if your company has a different payment policy, the same should inform us in advance The currency of fees is in US Dollars (USD). Payments can be made in USD or UAE local currency AED (Arab Emirates Dirhams) either by Bank Transfer or by Credit Card. Our Bank Account details will be provided on the Invoice Please note that we do accept payment by cash, in USD or AED, only for the last minute bkings Cancellation of Courses It may be necessary for PetroKnowledge to amend or cancel any course, course times, instructors, dates or published fees due to unforeseen circumstances and we reserve the right for such changes Any amendments will be advised before the course start date and any bkings already paid in full will not be subject to increased fees Cancellation by Client Once you have completed your bking, received your confirmation of enrollment and a dated payment Invoice, you are deemed to have a contract with PetroKnowledge. You reserve the right to cancel this contract given the below terms All cancellations must be received in writing at reg@petroknowledge.com and info@petroknowledge.com at least 14 days prior to the training After the cancellation period has expired, consideration may be given, on a case to case basis, if a registered delegate nominates a substitute on the same course, shifts to next session of the course or moves to a new course For a cancellation request made on or before the statutory 14 day cancellation period, a refund may be given or a credit note issued which can be used against future course fees A 25% administration fee (of the total course fee at the time of bking) will be charged for any cancellations made outside of the statutory cancellation period Attendance Certificate The daily course schedule should be accurately followed to ensure undeterred implementation of our training All delegates, who participated in their course throughout, will receive the Certificate of Completion on the last day Please report any foreseeable absences to a PetroKnowledge representative or to your sponsors directly An absence of three (3) or more sessions of the course will invalidate your eligibility for the Certificate of Completion T: +971 2 5577 389 F: +971 2 5577 128 E: info@petroknowledge.com P.O. Box: 135120, Abu Dhabi, U.A.E. www.petroknowledge.com