Stackable Drum Racks and Sumps $ 876.00 O Prevent spills by using containment sumps positioned beneath the drum rack. O Components allow you to organize a wide variety of combinations to suit your exact needs. By combining Stackable Drum Racks and Spill Sumps a variety of configurations are available Select the components you need to configure a layout suited to your specific needs Each Rack is easily lifted and relocated with a forklift Spill Containment Sumps are sized to comply with OSHA and EPA requirements These sumps catch drips and spills associated with dispensing, maintaining a neat, safe area All components are made of heavy gauge steel, galvanized to provide years of service with a rust-free appearance 2-Drum Rack and 3 16-gallon Drum Rack with Containment Sump, Dispensing shelf sold separately. K12-1110 O Note: Individual component prices listed below. Removable Metal Dispensing Shelf. K17-1909 $ 79.00 2 each double stacked 1-Drum Racks and Containment Sump. Dispensing shelf sold separately. K12-1117 2 each double stacked 2-Drum Racks and Containment Sump. Dispensing shelf sold separately. K12-1112 $ 700.00 $ 860.00 Appropriate Combinations Dimensions L x D x H Storage Capacity Stacking Capacity 1-Drum Sump 28 x 50 x 10 55 gallons 1-Drum Rack 33 x 25 x 33 1 x 55-gal Drum 2-High 2 / 3 Drum Sump 50 x 50 x 6 55 gallons 3 16-gal Drum Rack 56 x 25 x 36 3 x 16-gal Drum 2-High 2 - Drum Rack 56 x 25 x 36 2 x 55-gal Drum 2-High K12-1101 $ 234.00 K17-1904 $ 225.00 K12-1102 $ 374.00 K17-1906 $ 299.00 K17-1905 $ 300.00 110 www.denios-us.com E-Mail: info@denios-us.com
Stackable Drum Racks with Spill Pallets Sump of heavy gauge steel for extended life 66-gallon sump volumes meet EPA & UFC requirements Sump welds are 100% inspected with a low-viscous test to insure leaktightness Fully welded frame construction Complete with forklift pockets and stackable 2-high $ 216.00 $ 79.00 $ 1,228.00 Drum Rollers ease positioning of 55-gallon drum and allow drain to be rotated to the top to prevent dripping or leaks. Rollers only - cradles not included. K17-1915 Removable Metal Dispensing Shelf. K17-1909 4 Drum Spill Pallet with a Transport Rack for three 16-gallon drums and a Transport Rack for two 55-gallon drums. (Dispensing Shelf not included.) K17-3110 $ 1,691.00 8 Drum Spill Pallet with two Stackable Drum Racks for two 55-gallon drums. (Dispensing Shelf not included.) K17-3113 4 Drum Inline Spill Pallet with two Stackable Drum Racks for three 16-gallon drums. K17-3112 $ 1,346.00 Appropriate Combinations Appropriate Combinations Dimensions L x D x H Storage Capacity Stacking Capacity 2-Drum Pallet 54 x 34 x 14 2 x 55 gal. drums 1-Drum Rack 33 x 25 x 33 1 x 5 gal. drums 2-high 4-Drum Pallet 54 x 50 x 10 4 x 55 gal. drums 4-Drum Inline Pallet 107 x 34 x 10 4 x 55 gal. drums 8-Drum Pallet 107 x 50 x 10 8 x 55 gal. drums 2-Drum Rack 56 x 25 x 36 2 x 55 gal. drums 2-high 3 16-gal Drum Rack 56 x 25 x 36 3 x 16 gal. drums 2-high K17-3102 $ 598.00 K17-1904 $ 225.00 K17-3103 $ 726.00 K17-3104 $ 9.00 K17-3105 $ 1,205.00 K17-1905 $ 300.00 K17-1906 $ 299.00 Fax: 502-933-1560 ı 1 2013 www.denios-us.com 111
Drum Racks with Spill Sumps O Store and dispense 55-gallon drums in almost any combination. Combine vertical and horizontal positioning to optimize your liquid chemical warehousing. O Storage incorporates compliant spill containment sumps providing both security and improved housekeeping! $ 1,354.00 Store and dispense 4 drums over containment sump. Dispensing Shelf sold separately. K34-1101 Drum Roller Assembly Drum Cradle Dispensing Shelf Frame $ 1,998.00 Racking and Sumps promote multi-functional arrangements Beams are adjustable in 2 increments to suit your needs Shipped knock-down Assembly in minutes Racking components are selected for proper load capacities Sumps are galvanized to maintain a like-new appearance while resisting corrosion Rack components are powder coated enamel Horizontal/vertical drum configurations include galvanized grating for sump- purely horizontal configurations do not Store 3 drums horizontally with 3 vertically on grating above the spill sump. K34-1109 This exploded view highlights the components of the Knock-Down Containment Rack System. Corner Protectors Cross Members Spill Sump Containment Grating Rack Dimensions L x D x H Sump Dimensions L x D Sump Volume Load Capacity (per shelf, uniform) 4-Drum Horiz 66 x 36 x 96 60 x 50 66 2-Drum Horiz / 4 Vert 66 x 36 x 96 60 x 50 66 6-Drum Horiz 102 x 36 x 96 96 x 50 3-Drum Horiz / 6 Vert 102 x 36 x 96 96 x 50 K34-1101 $ 1,354.00 K34-1103 $ 1,466.00 K34-1107 $ 1,704.00 K34-1109 $ 1,998.00 112 www.denios-us.com E-Mail: info@denios-us.com
Drum Racks with Spill Sumps Galvanized Steel Grating provides secure platform for vertical drums Poly Sump Liners available for highly corrosive liquids Sump volumes meet or exceed EPA & UFC requirements Horizontal/vertical drum configurations include galvanized grating for sump- purely horizontal configurations do not Rack for 4 horizontal drums and 2 vertical drums with extra room for smaller containers. K34-1113 $ 1,875.00 $ 2,191.00 Store 9 drums horizontally above the spill sump. Dispensing Shelf sold separately. K34-1117 Accessories: $ 79.00 $ 216.00 Drum Roller Assembly eases positioning of 55-gallon drum and allows drain to be rotated to the top to prevent dripping or leaks. K17-1915 Metal Dispensing Shelf. K17-1909 Rack Dimensions L x D x H Sump Dimensions L x D Sump Volume Load Capacity (per shelf, uniform) 6-Drum Horiz 66 x 36 x 96 60 x 50 66 4-Drum Horiz / 4 Vert 66 x 36 x 96 60 x 50 66 9-Drum Horiz 102 x 36 x 96 96 x 50 6-Drum Horiz / 6 Vert 102 x 36 x 96 96 x 50 K34-1111 K34-1113 K34-1117 K34-1119 $ 1,763.00 $ 1,875.00 $ 2,191.00 $ 2,487.00 Fax: 502-933-1560 ı 1 2013 www.denios-us.com 113
Pallet Rack & Sump Combination Vertically For Storing Drums Vertically O Bring your chemical storage area into spill compliance while improving handling efficiency and safety. DENIOS combines its Spill Pallet expertise with sturdy pallet racking to create a versatile storage system for drums. $ 2,994.00 per Section $ 75.00 / Pair For additional safety, add Corner Protectors. K34-3901 / Pair Sections can be joined to accommodate the capacity and configuration best suited for each area. K34-4602 Components matched for required loads and volumes Sturdy galvanized grating provides secure, easy to load base for pallets on both levels Racks equipped with Pallet Stops and Galvanized Splash Guards Assembles in minutes with easy-to-follow instructions provided Each bay sized to accommodate 2 wooden pallets holding 4 Drums each Options include Corner Protectors and Galvanized Sump $ 2,994.00 Drums may be stored on pallets or directly on the sturdy, galvanized bar grating. K34-4602 Dimensions L x D x H Load Capacity - Upper Rack Load Capacity - Spill Sump Sump Volume 16 Drum Rack 126 x 54 x 120 7500 7500 159 1410 K34-4602 $ 2,994.00 114 www.denios-us.com E-Mail: info@denios-us.com
Pallet Rack & Sump Combination Horizontally For Storing Drums Horizontally Organize your storage with efficient 2-tier drum storage in any combination to suit your material demands. Combine with racks for vertical / palletized drums in any configuration you require. $ 2,836.00 K34-4608 O Provide a safe, compliant horizontal placement of drums with spill containment sumps extending forwards to catch drips and spills from dispensing. $ 79.00 Add optional Dispensing Shelf. K17-1909 Combo Racks available for IBC s. See page 69! Dimensions L x D x H Load Capacity - Upper Rack Load Capacity - Spill Sump Sump Capacity 8 Drum Rack 126 x 54 x 120 3000 3000 159 1050 K34-4608 $ 2,836.00 Fax: 502-933-1560 ı 1 2013 www.denios-us.com 115
Spill Containment Sumps for Pallet Racks DENIOS Sumps provide spill containment beneath your existing pallet racks. Simply raise the lower tier level to accommodate the sump height, slide the sumps into place. Containment volumes meet EPA code requirements Sumps are constructed of heavy gauge galvanized steel for extended durability Raised sumps allow for easy cleaning and forklift access for transport Standard sumps models accommodate all rack depths up to 48 inches $ 806.00 O Additional sump sizes available. O Call for quotation. $ 544.00 Floor sump for 54 wide rack. K34-3916 Sump positioned beneath a 108 pallet rack section provides compliant spill containment for up to 900 gallons of stored liquids = 16 drums. K34-3913 O EPA - 40CFR 264.175 (3) The containment systems must have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater. Add optional Corner Protectors for additional rack and sump security. K34-3901 $ 75.00 / Pair Rack Size W x D (max) Sump Dimensions W x D x H Sump Capacity (Ibs) 8 drum rack 54 x 48 53 x 50 x 10 68 183 16 drum rack 96 x 48 95 x 50 x 8 278 16 drum rack 108 x 48 107 x 50 x 8 90 300 K34-3916 $ 544.00 K34-3919 $ 780.00 K34-3913 $ 806.00 116 www.denios-us.com E-Mail: info@denios-us.com
Sump Inserts for Pre-Existing Pallet Racks O Quickly and easily bring existing pallet rack storage into compliance. Pallet Rack Sump inserts consist of a spill containment sump and easily removable galvanized steel grating Made to fit exact pallet rack specifications; Sump Inserts provide economical retrofits Sump of heavy duty, corrosion resistant galvanized steel Sump welds are 100% inspected with a low-viscous test to insure leaktightness Load Capacity - 250 psf Sump volumes meet EPA requirements For Custom Sizes Call For Consultation For custom applications please provide us your rack dimensions (A, B, and C as shown) and we will build to your specifications. A B C FOR RACK DIMENSIONS W X D Nominal Dimensions A x B x C Sump Volume Load Capacity (psf) 96 x 36 95 x 29 x 42 58 250 335 108 x 36 107 x 29 x 42 65 250 392 96 x 42 95 x 36 x 50 70 250 387 108 x 42 107 x 36 x 50 79 250 452 K38-1140 $ 835.00 K38-1150 $ 937.00 K38-1160 $ 971.00 K38-1170 $ 1,091.00 Fax: 502-933-1560 ı 1 2013 www.denios-us.com 117