2017 Commercial Program Heating, Ventilation & Air Conditioning Systems ( Member Information Page ) WrightHennepin Cooperative Electric Assn., P.O. Box 330, Rockford, MN 55373 Ph: 7634773000 Business Member Information Business name Billing address Phone Installation address (if different from above) Account number Contact name Email Vendor Information Vendor name Vendor address City, State, ZIP Vendor contact name Email City State ZIP Phone Phone The undersigned does hereby certify that 1) The undersigned, and not the cooperative, is solely responsible for the accuracy of the information contained in this application, 2) all rules of the relevant rebate program (RTU, Chiller, etc.) have been followed, and 3) the installation is complete. Further, the undersigned acknowledges that nothing contained in the application shall impose any liability on the cooperative for the work performed and information presented by the member s engineer, contractor or vendor. WrightHennepin Cooperative Electric Association will hereafter be referred to in this application as "WH" or as " the cooperative". Member signature Date How to Apply for all WH Commercial HVAC related Programs: 1. Complete the relevant rebate forms, including all pertinent information. (please note all warranty information, rules, and qualifications on the rules and information tabs per relevant forms) 2. Forward the applicable completed application forms, including copies of relevant project invoices (if available at time of submittal) to a WH commercial key account representative for review. 3. The cooperative's subsequent approval is required, to ensure payment of applicable rebate incentive. 4. The member must apply for applicable rebate incentive, no later than November 1st, 2017.
2017 Heating, Ventilation & Air Conditioning Systems Rules & Information: Rooftop Units, Split Systems, Air Source Heat Pumps, Economizers WrightHennepin Cooperative Electric Assn., P.O. Box 330, Rockford, MN 55373 Ph: 7634773000 Specific Rules and Qualifications 1. Documents establishing proofofpurchase (invoice) must be furnished with the original rebate application. 2. On the documents establishing proofofpurchase, circle the energysaving product(s) for which a rebate is requested and attach to the original application. If not indicated on the invoice, please add the number of units installed, manufacturer, model number and capacity (in tons). 3. Submit the manufacturer s data sheets with the rebate application. The sheets must show efficiency ratings in accordance with the most recent Air Conditioning and Refrigeration Institute (ARI) Standards and must contain efficiency information for the following: Rooftop units, split systems, air source heat pumps, condenser units economizers S,, i, HSPF IPLV (if applicable) 4. Only new and complete central air conditioning units and remote condensing unit retrofits qualify. Rebuilds do not qualify. 5. The new equipment must use a minimum ozone depleting refrigerant. 6. If the efficiency rating is in S where the application asks for, multiply S by.855 to calculate rating. 7. The cooperative retains the right to make adjustments to correct incentive calculations if necessary. Split Systems Rules 1. Both the condensing unit and the Acoil must be purchased to be eligible to receive a rebate. Economizer Rules 1. Enthalpy controls required for rebate. 2. CO2 controls are optional but recommended. Warranty Information qualifications do not imply any representation or warranty of such equipment, design or installation by the cooperative. The cooperative shall not be responsible or liable for any personal injury or property damage caused by this equipment. The cooperative does not guarantee that a specific level of energy or cost savings will result from the implementation of energy conservation measures or the use of products funded under this program. In no event shall the cooperative be liable for any incidental or consequential damages. Other Important Program Rules 1. Evaluation must be complete before funds will be issued for the rebate. 2. Members and vendors must submit itemized equipment invoices, along with rebate application and worksheet, to the cooperative. To ensure that the equipment installed meets the cooperative's performance standards, these invoices must itemize labor charges, quantity and price of the equipment installed, as well as information regarding the manufacturer and model numbers for all equipment included in the rebate. 3. The cooperative reserves the right to conduct random inspections of installations. 4. The member is responsible for checking with the cooperative to determine whether funding is available and to verify program parameters. 5. Project must comply with all program specific rules and qualifications. 6. The maximum rebate amount shall be the lesser of 50 percent of the project cost or as determined by the cooperative. 7. members must apply for rebates no later than November 1st, 2017..
2017 Data Input Page: Rooftop Units, Split Systems, Air Source Heat Pumps, Economizers WrightHennepin Cooperative Electric Assn., P.O. Box 330, Rockford, MN 55373 Ph: 7634773000 Business Name: 0 Criteria Equipment Type Unit Tons, S or i /ton rebate, /ton per 0.1 /S above base Specific Rules Rooftop Units (RTU) 65,000 Btuh 65,000 < 135,000 135,000 < 240,000 240,000 < 760,000 760,000 Split Systems 65,000 65,000 < 135,000 135,000 250,000 Air Source Heat Pumps 65,000 65,000 < 135,000 135,000 250,000 Condensers > 65,000 < 135,000 135,000 RTU Economizers Energy Ratio (Btu/Watt) S Seasonal Energy Ratio (Btu/watt) C.O.P. Coefficient of Performance HSPF Heating Seasonal Performance Factor < 5.4 13.50 (S) 13.5 (i) 18.00 5.00 5.5 11.3 10.8 13.0 18.00 5.00 11.4 19.9 10.7 13.0 18.00 5.00 20.0 63.3 10.2 12.0 18.00 5.00 63.3 9.6 12.0 18.00 5.00 < 5.4 13.5 (S) 18.00 5.00 5.5 11.3 10.8 18.00 5.00 11.4 19.9 10.7 18.00 5.00 HSPF < 5.4 13.0 (S) 7.7 200.00 5.00 5.5 11.3 10.1 8.5 200.00 5.00 11.4 20 9.3 8.5 200.00 5.00 5.5 11.3 10.8 18.00 5.00 11.4 10.7 18.00 5.00 Enthalpy controlled and includes CO 2 controls 13 / RTU Ton IPLV Integrated Part Load Value FLV Full Load Value ( kw/ton) NPLV NonStandard Part Load Value (kw/ton) i Intergrated Energy Ratio ARI, 3.2 COP rated at 47 F ARI, 3.2 COP rated at 47 F ARI, 3.2 COP rated at 47 F Roof Top Units Air Source Heat Pumps Split System ACoil Model Number A B C D E F Eff. S, Tons/unit 5 X A X 10 Number of Units 18 X A or i X (C D) (see table) (B + E) X F Total = [ 18 x ] + [ 5 X X (S, or i minus Min. Eff) X 10] X Number of Units Project Cost s must comply with all program specific rules and qualifications. ACoil Model Number Condensing Units A B C D E F S Eff. Tons/unit or 5 X A X 10 Number of Units 200 X A X (C D) (see table) (B + E) X F Total = [ 200 x ] + [ 5 X X (S or minus Min. Eff) X 10] X Number of Units Project Cost s must comply with all program specific rules and qualifications. Economizers G RTU H Number of Units Enthalpy Controlled Y or N CO2 Controls Purchased Y or N 13 X G X H Total = 13 X RTU X Number of Units Project Cost s must comply with all program specific rules and qualifications. Tot. Project Cost Total
2017 Chillers, Cooling Towers, Air Handling VAVs Rules & Information Page WrightHennepin Cooperative Electric Assn., P.O. Box 330, Rockford, MN 55373 Ph: 7634773000 Specific Rules and Qualifications 1. Documents establishing proofofpurchase (invoice) must be furnished when the original rebate application is completed. 2. On the documents establishing proofofpurchase, circle the energysaving products for which a rebate is requested and attach to the original application. If not indicated on the invoice, please add the number of units installed, manufacturer, model number and capacity (in tons). 3. Submit the manufacturer s data sheets with the rebate application. The sheets must show efficiency ratings in accordance with the most recent (design conditions for chillers) and must contain efficiency information for the following: Chillers 4. Only new and complete central air conditioning units, water chillers, and remote condensing unit retrofits qualify. Rebuilds do not qualify. 5. The new equipment must use a minimum ozone depleting refrigerant. 6. s for aircooled equipment are limited to 150 tons per account. Larger total capacities must use the cooperative's Custom Energy Grant program. 7. If the efficiency rating is stated in S where the application asks for, multiply the S by 0.855 to calculate rating. 8. The maximum rebate amount shall be the lesser of 50 percent of the project cost, or as determined by the cooperative. Chiller Rules 1. No rebates will be provided for backup systems. Backup systems are defined as a separate chiller that is required only when a primary chiller fails. 2. The basis for the rebate efficiency level will be design conditions and chiller efficiency data as contained in the vendor's data. 3. Members can use either the standard rebate (i.e. based on fullload efficiency) or partload rebate formula for centrifugal chillers 150 tons. Heat Rejection Rules (oversized cooling towers) 1. is paid per nominal tower ton. 2. Only new towers for electric chillers are eligible. 3. For purposes of determining rebate eligibility, design condensing water flow rate must be 3.0 gallons per minute per ton. 4. Design condensing water temperature to chiller must be 84 F or less. 5. Cooling tower size must be larger than that which would be used to achieve a design condensing water temperature to the chiller of 85 F at wet bulb temperature of 78 F. 6. The brake horsepower per cell of tower fans must not increase as compared to the tower which would deliver 85 F design condensing water temperature. 7. The motors used in the cooling tower fans must meet the cooperative's NEMA Premium Efficient Motor program standards. See Premium Efficient Motor application. Air Handling Rules (variable air volume (VAV) conversion) 1. is paid per VAV box. One box serves each air handling unit zone. 2. The installation may be new or retrofit applications. line VAV model compares airhandling zone which is being converted from constant volume. 3. The zone must be air conditioned by electric cooling equipment. 4. Only new VAV boxes (without fans) for retrofit applications may qualify. 5. Supply and return fans (if return fans are used) serving the VAV zones must be equipped with Variable Frequency Drives (VFD). 6. Appropriate controls to reduce fan energy usage must be included. 7. The motors and/or VFDs for air handling fans must meet the cooperative's NEMA Premium Efficient Motor and VFD program standards. See Premium Efficient Motor and VFD applications.
Chillers, Cooling Towers, Air Handling VAVs Data Input Page WrightHennepin Cooperative Electric Assn., P.O. Box 330, Rockford, MN 55373 Ph: 7634773000 Business Name: 0 Criteria Equipment Type Unit Tons, rebate /ton per /ton 0.01 kw/ton Specific Rules S/ 0.1 Air Cooled Chillers FLV IPLV S Chiller rebates are based on design conditions 9.70 13.00 10.00 2.00 FLV IPLV Water Cooled Chillers Chiller rebates are based on design conditions < 150 Tons (centrifugal) 20.00 2.00 Must improve on ASHRAE 90.1 150 Tons (centrifugal) 20.00 2.00 2010 baseline by 0.016 kw/ton < 150 Tons (screw/scroll) 0.74 0.60 18.00 2.00 0.74 FLV kw/ton, 0.60 IPLV kw/ton 150 Tons (screw/scroll) 0.66 0.56 18.00 2.00 0.66 FLV kw/ton, 0.56 IPLV kw/ton Cooling Towers Oversized only 3/nominal tower ton Air Handling Systems (VAV) FLV Full Load Value ( kw/ton) IPLV Integrated Part Load Value (kw/ton) 170/VAV Box Must be controlled and operated with VFD and premium motor Air Cooled Chillers / S Eff. Example of Total = [ 10 x ] + [ 2 X (Min. /S from table equip /S from vendor)/.1 x Tons] X Number of Units Project Cost Chillers < 150 tons (Centrifugal) must comply with all program specific rules and qualifications. Eff. Example of Total = [ 20 x ] + [ 2 X (Min. from table equip from vendor)/.01 x Tons] X Number of Units Project Cost Chillers 150 tons (Centrifugal) must comply with all program specific rules and qualifications. Eff. Example of Total = [ 20 x ] + [ 2 X (Min. from table equip from vendor)/.01 x Tons] X Number of Units Project Cost Chillers < 150 tons (screw/scroll) must comply with all program specific rules and qualifications. Eff. Example of Total = [ 18 x ] + [ 2 X (Min. from table equip from vendor)/.01 x Tons] X Number of Units Project Cost Chillers 150 tons (screw/scroll) must comply with all program specific rules and qualifications. Eff. Example of Total = [ 18 x ] + [ 2 X (Min. from table equip from vendor)/.01 x Tons] X Number of Units Project Cost must comply with all program specific rules and qualifications. Cooling Towers Number of Units Number of Tons = 3 X # Tons X # Units Project Cost must comply with all program specific rules and qualifications. Air Handling Systems (VAV's) Number of Units CFM = 170 X # Units Project Cost must comply with all program specific rules and qualifications.
2017 * Packaged Terminal Air Conditioner / Heat Pump (PTAC/HP) * MiniSplit & WaterSource Heat Pumps Program Rules & Information WrightHennepin Cooperative Electric Assn., P.O. Box 330, Rockford, MN 55373 Ph: 7634773000 Specific Rules and Qualifications 1. Documents establishing proofofpurchase (invoice) must be furnished when the original rebate application is completed. 2. On the documents establishing proofofpurchase, circle the energysaving product(s) for which a rebate is requested and attach to the original application. If not indicated on the invoice, please add the number of units installed, manufacturer, model number and capacity (in tons). 3. Customers should use a separate form for each size category of equipment to facilitate calculations. 4. Submit the manufacturer s data sheets with the rebate application. The sheets must show efficiency ratings in accordance with the most recent AirConditioning, Heating, and Refrigeration Institute (AHRI) Standards and must contain efficiency information for the following: PTAC & PTASHP Minisplit AC & ASHP Water Source HP S or 5. Only new and complete units qualify. 6. The new equipment must use a minimum ozone depleting refrigerant. Warranty Information qualifications do not imply any representation or warranty of such equipment, design or installation by the cooperative. The cooperative shall not be responsible or liable for any personal injury or property damage caused by this equipment. The cooperative does not guarantee that a specific level of energy or cost savings will result from the implementation of energy conservation measures or the use of products funded under this program. In no event shall the cooperative be liable for any incidental or consequential damages. Other Important Program Rules 1. Installation must be complete before funds will be issued for the rebate. 2. Members and vendors must submit itemized equipment invoices, along with rebate application and worksheet, to the cooperative. To ensure that the equipment installed meets the cooperative's performance standards, these invoices must itemize labor charges, quantity and price of the equipment installed, as well as information regarding the manufacturer and model numbers for all equipment included in the rebate. 3. The cooperative reserves the right to conduct random inspections of installations. 4. The member is responsible for checking with the cooperative to determine whether funding is available and to verify program parameters. 5. Project must comply with all program specific rules and qualifications. 6. The maximum rebate amount shall be the lesser of 50 percent of the project cost or as determined by the cooperative. 7. members must apply for rebates no later than November 18, 2017.
* Packaged Terminal Air Conditioner / Heat Pump (PTAC/HP) * MiniSplit & WaterSource Heat Pumps Data Input Page WrightHennepin Cooperative Electric Assn., P.O. Box 330, Rockford, MN 55373 Ph: 7634773000 Business Name Criteria Packaged Terminal Air Conditioners (PTAC's) / C.O.P.*, /ton rebate, /ton per 0.1 above base Specific Rules With electric resistance heating With heat pump heating* MiniSplit AC & ASHP 12.00 12 / 2.5 10.00 10.00 1.75 3.50 With electric resistance heating With heat pump heating* WaterSource Heat Pumps with C.O.P. 4.1 13.00 13/2.5 12.00 200.00 300.00 13.00 0.00 0.00 1.30 minisplit ASHP rebate at 200 / unit minisplit ASHP rebate at 300 / unit based on Energy Ratio (Btu/Watt) S Seasonal Energy Ratio (Btu/watt) C.O.P. Coefficient of Performance Packaged Terminal Air Conditioner (PTAC) PTAC & Model Number A B C D E # of Units Total Units w/ Resistance Htg Units w/ Resistance Htg calculations (Resistance Heating) = [ (A X B X 10) + Inc. Eff. (A X B x 1.75 x (C 10)/0.1)) ] calculations (Heat Pump Heating) = [ (A X B X 10) + Inc. Eff. (A X B X 3.50 x (C 10)/0.1)) ] Project Cost must comply with all program specific rules and qualifications. Packaged Terminal Air Source Heat Pump (PTASHP) A B # C D E & Model # of PTASHP C.O.P. Number Units Units w/ Heat Pump Htg Units w/ Heat Pump Htg calculations (Resistance Heating) = [ (A X B X 10) + Inc. Eff. (A X B x 1.75 x (C 10)/0.1)) ] calculations (Heat Pump Heating) = [ (A X B X 10) + Inc. Eff. (A X B X 3.50 x (C 10)/0.1)) ] Total Project Cost must comply with all program specific rules and qualifications. MiniSplit Air Conditioning System A B C D MiniSplit Air & Model # of Total Conditioning System Number Units Units w/ Resistance Htg Units w/ Resistance Htg Project Cost must comply with all program specific rules and qualifications. MiniSplit Air Source Heat Pump A B # C D MiniSplit Air Source & Model # of Total C.O.P. Heat Pump Number Units Units w/ Heat Pump Htg Units w/ Heat Pump Htg Project Cost must comply with all program specific rules and qualifications. WaterSource Heat Pump A B C D E # of Units calculations (Resistance Heating) = [ (A X B X 13) + Inc. Eff. (A X B x 1.30 x (C 12)/0.1)) ] Total Project Cost must comply with all program specific rules and qualifications. Total