1. Identification Product identifier Other means of identification Product code YSI 608000, (6080) Recommended use Recommended restrictions Emergency phone number 2. Hazard(s) identification Physical hazards Health hazards OSHA hazard(s) SAFETY DATA SHEET AMCO CLEAR TURBIDITY STANDARD, 0.0 NTU Reagent for determination of turbidity of liquids. ne known. Manufacturer/Importer/Supplier/Distributor information DISTRIBUTOR: YSI, INC Company name GFS Chemicals, Inc. ADDRESS 1700/1725 BRANNUM LANE Address P.O. Box 245 YELLOW SPRINGS, OHIO 45387 Powell TELEPHONE (937) 767-7241 OH E-MAIL MSDSINFO@XYLEMINC.COM 43065 US Telephone Phone 740-881-5501 Toll Free 800-858-9682 Fax 740-881-5989 Website www.gfschemicals.com E-mail service@gfschemicals.com Emergency Assistance Chemtrec 800-424-9300 t classified. t classified. t classified. hazards resulting from the material as supplied. Label elements Hazard symbol Signal word Hazard statement Precautionary statement Prevention Response Storage Disposal Hazard(s) not otherwise classified (HNOC) symbol. t classified. 3. Composition/information on ingredients Mixtures n-hazardous components Chemical name WATER CAS number % 7732-18-5 >99.9 Other components below reportable levels 0.01082 *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Inhalation Skin contact Eye contact Ingestion Move to fresh air. Call a physician if symptoms develop or persist. Dry skin with paper towel or similar. Rinse with water. Get medical attention if irritation develops and persists. Get medical attention if symptoms occur. 1 / 6
Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed 5. Fire-fighting measures Treat symptomatically. Suitable extinguishing media Use extinguishing agent suitable for type of surrounding fire. Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Environmental precautions 7. Handling and storage t applicable. Wear suitable protective equipment. special precautions. Containment of this material should not be necessary. This product is miscible in water. Flush with water. Never return spills in original containers for re-use. For waste disposal, see section 13 of the MSDS. special environmental precautions required. Precautions for safe handling special precautions required. Conditions for safe storage, including any incompatibilities Do not allow material to freeze. 8. Exposure controls/personal protection Occupational exposure limits exposure limits noted for ingredient(s). Biological limit values Appropriate engineering controls biological exposure limits noted for the ingredient(s). Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Individual protection measures, such as personal protective equipment Eye/face protection Skin protection Hand protection Other Respiratory protection Thermal hazards General hygiene considerations t normally needed. t normally needed. rmal work clothing (long sleeved shirts and long pants) is recommended. personal respiratory protective equipment normally required. 9. Physical and chemical properties Appearance Odor Physical state Form Color Odor threshold Handle in accordance with good industrial hygiene and safety practice. Clear. ph 6.7 Liquid. Liquid. Colorless. Odorless. Melting point/freezing point 32 F (0 C) estimated 2 / 6
Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) 212 F (100 C) Approximately t applicable. Upper/lower flammability or explosive limits Flammability limit - lower (%) Flammability limit - upper (%) Explosive limit - lower (%) Explosive limit - upper (%) Vapor pressure Vapor density Relative density Solubility(ies) Partition coefficient (n-octanol/water) Auto-ignition temperature 0.000011 hpa estimated Completely miscible. Decomposition temperature Viscosity Other information Density Percent volatile 100 % Specific gravity 10. Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products 11. Toxicological information 1.00 g/cm3 estimated 1.00 estimated Material is stable under normal conditions. Hazardous polymerization does not occur. Do not freeze. ne known. Information on likely routes of exposure Ingestion Inhalation Skin contact Eye contact Symptoms related to the physical, chemical and toxicological characteristics Information on toxicological effects Acute toxicity Product hazardous decomposition products are known. Based on available data, the classification criteria are not met. Species AMCO CLEAR TURBIDITY STANDARD, 0.0 NTU (CAS Mixture) Acute Dermal LD50 Oral LD50 Rabbit Bird Test Results 3 / 6
Product Species Mouse Rat Test Results TD Rat TDL0 Rat * Estimates for product may be based on additional component data not shown. Skin corrosion/irritation Serious eye damage/eye irritation Respiratory sensitization Skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity - single exposure Specific target organ toxicity - repeated exposure Aspiration hazard Chronic effects Further information 12. Ecological information Ecotoxicity Product This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. Prolonged inhalation may be harmful. This product has no known adverse effect on human health. Contains a substance which causes risk of hazardous effects to the environment. t applicable. Species AMCO CLEAR TURBIDITY STANDARD, 0.0 NTU (CAS Mixture) Crustacea Fish EC50 LC50 Daphnia * Estimates for product may be based on additional component data not shown. Persistence and degradability data is available on the degradability of this product. Bioaccumulative potential Mobility in soil Other adverse effects 13. Disposal considerations Disposal instructions Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging 14. Transport information Fish Test Results 34905.6602 mg/l, 48 hours, estimated 21604.9727 mg/l, 96 hours, estimated Wash to drains with lots of water. Dispose in accordance with all applicable regulations. DOT t regulated as a hazardous material by DOT. IATA t regulated as a dangerous good. IMDG t regulated as a dangerous good. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Empty containers should be taken to an approved waste handling site for recycling or disposal. information available. 4 / 6
15. Regulatory information US federal regulations All components are on the U.S. EPA TSCA Inventory List. TSCA Section 12(b) Export tification (40 CFR 707, Subpt. D) US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) t on regulatory list. CERCLA Hazardous Substance List (40 CFR 302.4) t listed. Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories SARA 302 Extremely hazardous substance SARA 311/312 Hazardous chemical Other federal regulations Immediate Hazard - Delayed Hazard - Fire Hazard - Pressure Hazard - Reactivity Hazard - Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Safe Drinking Water Act (SDWA) Drug Enforcement Administration (DEA). List 2, Essential Chemicals (21 CFR 1310.02(b) and 1310.04(f)(2) and Chemical Code Number t listed. Drug Enforcement Administration (DEA). List 1 & 2 Exempt Chemical Mixtures (21 CFR 1310.12(c)) DEA Exempt Chemical Mixtures Code Number Food and Drug Administration (FDA) US state regulations US. Massachusetts RTK - Substance List California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. US. New Jersey Worker and Community Right-to-Know Act US. Pennsylvania RTK - Hazardous Substances US. Rhode Island RTK US. California Proposition 65 US - California Proposition 65 - Carcinogens & Reproductive Toxicity (CRT): Listed substance t listed. International Inventories Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Canada China Europe Europe Japan Domestic Substances List (DSL) n-domestic Substances List (NDSL) Inventory of Existing Chemical Substances in China (IECSC) European Inventory of Existing Commercial Chemical Substances (EINECS) European List of tified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) 5 / 6
Country(s) or region Inventory name On inventory (yes/no)* Korea New Zealand Philippines United States & Puerto Rico Existing Chemicals List (ECL) New Zealand Inventory Philippine Inventory of Chemicals and Chemical Substances (PICCS) Toxic Substances Control Act (TSCA) Inventory *A "" indicates this product complies with the inventory requirements administered by the governing country(s) 16. Other information, including date of preparation or last revision Issue date Version # 01 Further information Disclaimer Revision Information August-12-2013 The information in the sheet was written based on the best knowledge and experience currently available. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Product and Company Identification: Synonyms Composition / Information on Ingredients: Ingredients Physical & Chemical Properties: Multiple Properties 6 / 6