LATICRETE Family of Adhesives PRODUCT CATEGORY USE MIX WITH SUBSTRATE APPLICATION LATICRETE 4237 Latex Thin-Set Latex Thin-Set Additive 211 (118.4) Concrete Interior Mortar Additive Slurry Bond Coat* 272 (118.4) Cement Backer Board Exterior (D.S # 230.1) 317 (118.4) Swimming Pool Steam Room Facade LATICRETE 3701 Mortar Admix Latex Thin-Set Additive 272 (118.4) Concrete Interior (D.S. 231.0) 317 (118.4) Cement Backer Board Exterior 220 (118.4) Swimming Pool Steam Room Facade Mortar Bed* 226 or Wall Render 209 * bonded mud bed requires a slurry bond coat of LATICRETE 4237 Latex Thin-Set Mortar Additive and LATICRETE 211 Crete Filler Powder or LATICRETE 254 Platinum Multipurpose Thin-Set Mortar unbonded mud bed requires a cleavage membrane, wire-reinforcing, and minimum 2" thickness 1 of 10
LATICRETE Family of Adhesives LATICRETE 333 Super Flexible Additive Latex Thin-Set Additive 272 (118.4 & 118.11) Concrete Interior (D.S. 266.0) 317 (118.4 & 118.11) Cement Backer Board Exteriorª 220 (118.4 & 118.11) Facade LATICRETE 101 Rapid-Set Latex Admix Latex Thin-Set Additive 272 (118.4 & 118.11) Concrete Interior (D.S. 264.0) 317 (118.4 & 118.11) Cement Backer Board Exterior 220 (118.4 & 118.11) Swimming Pool Steam Room Facade Mortar Bed* 226 209 * bonded mud bed requires a slurry bond coat of 4237/211 or 254 Platinum unbonded mud bed requires a cleavage membrane, wire-reinforcing, and minimum 2" thickness ª no standing water ˆ properly prepared - well bonded, clean and free of wax, oil, grease, dirt, dust, 2 or of any 10 other contaminant that can act as a bond breaker ˆˆ fully adhered, non-cushioned and properly prepared
LATICRETE Family of Adhesives LATICRETE 8510 Bonding Admix Acrylic Thin-Set Additive 272 (118.4) Concrete Interior (D.S. 249.4) 317 (118.4) Exterior 220 (118.4) Cement Backer Board Swimming Pool Facades Cement Terrrazzo Mortar Bed* 226 or Wall Render 209 LATICRETE 40 Multi-Use Acrylic Acrylic Thin-Set Additive 272 (118.4 & 118.11) Concrete Interior (D.S. 294.0) 317 (118.4 & 118.11) Cement Backer Board Exterior 220 (118.4 & 118.11) Facades Mortar Bed* 226 209 * bonded mud beds require a slurry bond coat of 4237/211 or 254 Platinum unbonded mud beds require a cleavage membrane, wire-reinforcing and minimum 2" of thickness mix 1 part 8510 with 2 parts clean water 3 of 10
LATICRETE Family of Adhesives LATICRETE 38 Acrylic Admix Acrylic Thin-Set Additive 272 (118.4) Concrete Interior (D.S. 283.0) 317 (118.4) Cement Backer Board Exterior 220 (118.4) Mortar Bed* 226 209 LATICRETE 73 Crete Admix Latex Thin-Set Additive 211 (118.4) Concrete Interior (D.S. 266.6) 272 (118.4) Cement Backer Board Exterior 317 (118.4) Swimming Pool Steam Room Facade * bonded mud beds require a slurry bond coat of 4237/211 or 254 Platinum unbonded mud beds require a cleavage membrane, wire-reinforcing and minimum 2" of thickness 4 of 10
LATICRETE 254 Platinum Multipurpose Multipurpose LATICRETE Thin-Set Family of Adhesives Water (only) Concrete Interior Thin-Set Mortar Thin-Set (118.4 & 118.11) Cement Backer Board Exterior (D.S. 677.0) Swimming Pool Steam Room Facade Gypsum Plaster LATICRETE 253 Gold Multipurpose Multipurpose Thin-Set Water (only) Concrete Interior Thin-Set Mortar Thin-Set (118.4 & 118.11) Cement Backer Board Exterior (D.S. 296.0) Facade ˆ properly prepared - well bonded, clean and free of wax, oil, grease, dirt, dust, or any other contaminant that can act as a bond breaker ˆˆ fully adhered, non-cushioned and properly prepared 5 of 10
LATICRETE 253 Gold Rapid Multipurpose LATICRETE Thin-Set Family of Adhesives Water (only) Concrete Interior Multipurpose Thin-Set Mortar Thin-Set (118.4 & 118.11) Cement Backer Board Exterior (D.S. 296.1) Facade LATICRETE 252 Silver Multipurpose Multipurpose Thin-Set Water (only) Concrete Interior Thin-Set Mortar Thin-Set (118.4 & 118.11) Cement Backer Board Exterior (D.S. 676.0) Facade ˆ properly prepared - well bonded, clean and free of wax, oil, grease, dirt, dust, or any other contaminant that can act as a bond breaker ˆˆ fully adhered, non-cushioned and properly prepared 6 of 10
LATICRETE 255 MultiMax Thin-Set Multipurpose LATICRETE Thin-Set Family of Adhesives Water (only) Concrete Interior Mortar Thin-Set Medium Bed Mortar (118.4 & 118.11) Cement Backer Board Exterior (D.S. 255.0) Facade Ceramic Tile LATICRETE 272 Premium Floor N' Wall Powder Thin-Set Water (118.1) Concrete Interior Thin-Set Mortar (D.S. 259.0) Latex (118.4) refer to specific latex Interior Exterior Swimming Pool Steam Room Facade LATICRETE 317 Floor N' Wall Thin-Set Powder Thin-Set Water (118.1) Concrete Interior Mortar (D.S. 317.0) Latex (118.4) refer to specific latex Interior Exterior Swimming Pool Steam Room Facade LATICRETE 211 Crete Filler Powder Powder Thin-Set 4237 or 73 (118.4) refer to 4237 or 73 Interior (D.S. 239.0) Exterior Swimming Pool Steam Room Facade when mixed with LATICRETE 3701 Mortar Admix or LATICRETE 4237 Latex Thin-Set Mortar Additive only 7 of 10
LATICRETE Family of Adhesives LATICRETE 220 Marble and Granite Powder Thin-Set Water (118.4) Concrete Interior Mortar Medium Bed Mortar Cement Backer Board Exterior (D.S. 297.0) Facade Latex (118.4) ¹ ² LATAPOXY 300 Epoxy Adhesive Epoxy Adhesive Pre-Packaged Concrete Interior (D.S. 633.0) Epoxy Cement Backer Board Exterior~ Components (118.3) Swimming Pool Steam Room Facade~ Epoxy Terrazzo Steel ¹ mix with LATICRETE 333 Super Flexible Additive ² mix with LATICRETE 3701 Mortar Admix ˆ properly prepared - well bonded, clean and free of wax, oil, grease, dirt, dust, or any other contaminant that can act as a bond breaker ˆˆ fully adhered, non-cushioned and properly prepared ~ contact LATICRETE Technical Services at 1-800-243-4788 x235 before recommending these installations 8 of 10
LATAPOXY 210 Modified Epoxy Epoxy LATICRETE Adhesive Family of Adhesives Pre-Packaged Concrete Interior Adhesive Grout Epoxy Cement Backer Board Exterior~ (D.S. 630.0) Components (118.8) Swimming Pool Steam Room Facade~ Steel LATAPOXY 310 Stone Adhesive Epoxy Spot Bond Adhesive Epoxy Components Concrete Interior (D.S. 679.0) Exterior Facades Cement Backer Board LATAPOXY 310 Rapid Stone Adhesive Epoxy Spot Bond Adhesive Epoxy Components Concrete Interior (D.S. 679.3) Exterior Facades Cement Backer Board ˆ properly prepared - well bonded, clean and free of wax, oil, grease, dirt, dust, or any other contaminant that can act as a bond breaker ˆˆ fully adhered, non-cushioned and properly prepared ~ contact LATICRETE Technical Services at 1-800-243-4788 x235 before recommending these installations exterior concrete must be 28 days old, 3,500 psi (24 Mpa) minimum compressive strength, 6" thick, reinforced, and a minimum of 28 days old exterior concrete masonry installations must be over double wythe construction with a 2" air gap between walls interior only maximum height restriction of 30', stone can be no more than 15 lbs. per square foot and no more than 720 square inches in facial dimension - check with local building code for actual code compliance 9 of 10
LATICRETE 15 Premium Multi-Mastic Organic LATICRETE Adhesive Family of Adhesives Pre-Mixed (136.1) Concrete Interiorº Adhesive Adhesive (Dry Areas Only) (D.S. 286.0) Cement Backer Board LATICRETE 9 Ceramic Tile Adhesive Organic Adhesive Pre-Mixed (136.1) Concrete Interiorº (D.S. 284.0) Adhesive (Dry Areas Only) Cement Backer Board ˆ properly prepared - well bonded, clean and free of wax, oil, grease, dirt, dust, or any other contaminant that can act as a bond breaker º interior use only - size limitations of: no larger than 10" x 10" ceramic tile or stone on vertical installations; no larger than 6" x 6" ceramic tile or stone on horizontal installations; and no larger than 2" x 2" on any porcelain tile installation All concrete surfaces must be free of curing compounds or concrete sealers, clean, free of dirt, dust, oil, wax, grease, paint, taping compound and any other material that can act as a bond breaker Cement backer board must be installed per board manufacturer's written installation instructions - check with board manufacturer for use of board in an exterior environment Please refer to LATICRETE TDS 152 for installation of tile or stone over wood floors For more specific information on each product please refer to listed data sheet (D.S.) - Data sheets are available at www.laticrete.com Technical Data Sheets are subject to change without notice. For latest revision, check our website @ www.laticrete.com TDS 199.doc R 2/12/04 LATICRETE, LATAPOXY and the logo are Registered Trademarks of LATICRETE International, Inc. TDS 199.doc R 2 December 24 10 of 10