Film Alcudia Polyethylene Isplen Polypropylene
Repsol Repsol is one of the largest energy companies worldwide and one of the biggest private Oil & Gas companies. With top quality assets in production and high potential exploration areas. A global company concerned with people s well-being and looking to build a better future by developing smart energy. A global company that seeks the welfare of people and is a step ahead in building a better future through the development of smart energy.
Chemicals In its Chemical activity, Repsol manufactures a wide variety of products, ranging from base petrochemicals to derivatives. We market our products in more than 95 countries. Repsol s Chemicals Division, with a high degree of integration, focuses its strategy in the constant generation of value through differentiated products and services. The main objective is to obtain its customers trust, ensuring a measure of sound business growth in the medium and long term. Base petrochemicals produce ethylene, propylene, butadiene and benzene. Derivative chemical production includes: Pilot plant in Repsol Technology Centre / Intermediate products: propylene oxide (PO), styrene (SM), polyether polyols for rigid and flexible foams, CASE polyols and propylene glycols. / Polyolefins, embracing polypropylene (PP) and its compounds, both high and low-density polyethylene (HDPE and LDPE), as well as ethylene vinyl acetate (EVA) and ethylene butyl acrylate (EBA) copolymer. / Synthetic rubbers, comprising hydrogenated rubbers (SEBS), thermoplastics (SBS) and solution-based styrene-butadiene rubber (SSBR). The products from Repsol s Chemical Division are used to manufacture everyday articles which improve people s quality of life, well-being and safety.
Repsol is committed to our customers global strategy putting our entire organization at their disposal to achieve a common goal: to create long-term relationships which enable us to rise to the common challenges our business presents.
Now available to Repsol s customers is a comprehensive range of polyolefin grades for film: LDPE, HDPE, mlldpe, EVA, EBA and PP. Repsol s range is characterised by: / Excellent optical and mechanical properties. / Excellent transparency. / Good processability. / Additives designed to meet the specific needs of each application. / Custom solutions.
Blown film. Low density polyethylene Grade MFI Density Process Additives Application 190ºC; 2.16 kg ISO 1183 Kg/m 3 Thermal Stabiliser Antiblock Slip Antistatic 2202F 0.25 921 Tubular Shrink film, protection industrial film. 2303F 0.30 922 Tubular Shrink film, protection industrial film. 2203F 0.30 922 Autoclave Shrink film, protection industrial film. PE033 0.30 922 Autoclave Shrink film, protection industrial film. PE034/A 0.30 922 Autoclave Shrink film, protection industrial film. 2107F 0.70 921 Autoclave Packing film, shrink film, medium duty bags. 2107FG 0.70 921 Autoclave Packing film, shrink film, medium duty bags. 2308F 0.75 923 Tubular Packing film,lamination, food packaging, shrink film, medium duty bags. 2308FG 0.75 923 Tubular Packing film,lamination, food packaging, shrink film, medium duty bags. PE015 1.00 921 Autoclave Packing film, shrink film, medium duty bags. 2212FA 1.20 922 Autoclave Packing film, shrink film, medium duty bags. 2212FG 1.20 922 Autoclave Packing film, shrink film, medium duty bags. PE003 2.00 920 Autoclave Packing and packing, hot melt adhesive, shrink film, bubble film. 2221F 2.10 922 Autoclave Packing and packaging, internal layer in coextrusion, shrink film. PE046/A 2.00 920 Autoclave Packing and packaging, shrink film. 2221FG 2.10 922 Autoclave Packing and packaging, external layer in coextrusion, shrink film, bubble film. 2321FS 2.10 922 Autoclave High brightness film, coextrusion, antiestatic film. PE063/A 4.00 920 Autoclave Thin film bags, automatic packaging, textile film. 2335FG 3.50 923 Autoclave Thin film bags, automatic packaging, textile film. Our developments of grades for high performance shrink film succeed in combining excellent optical properties with increased rigidity and high processability. The information contained herein is based on REPSOL QUIMICA s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
Blown film. High density polyethylene Grade MFI Density Process Additives Application 190ºC; 21.6 kg ISO 1183 Kg/m 3 Thermal Stabiliser Antiblock Slip Antistatic TR156G 9.00 956 Slurry Strong film of very low thickness, carrier bags, industrial liners, paper lamination film. TR135 12.00 938 Loop Carrier bags, rubbish bags, waterproof sheets. High gloss film. Low density polyethylene Grade MFI Density Process Gloss Haze Additives Application 190ºC; 2.16 kg ISO 1183 Kg/m 3 60º ISO 2813 % ASTM D-1003 Thermal Stabiliser Antiblock Slip 2805F 0.55 928 Autoclave 92 6.50 General purpose,shrink film/groups, packaging. 2810F 1.00 928 Autoclave 102 6.30 General purpose, shrink film/groups, packaging, lamination. 2810FG 1.00 928 Autoclave 97 9.00 General purpose, shrink film/groups, packaging, lamination. 3235FGA 3.50 932 Autoclave 75 7.50 Toilet tissue and kitchen paper easy-tear overwrap, high gloss coextrusion. For the hygiene segment, there is an easy-tear grade, with different additives. The information contained herein is based on REPSOL QUIMICA s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
Blown film. Repsol PE UltraClean Grade MFI Density Process Additives Application 190ºC; 2.16 kg ISO 1183 Kg/m 3 Antiblock Slip 008 0.75 923 Tubular Film with very low gel level, surface protection film, lamination film. 020 2.00 920 Autoclave Film with very low gel level, surface protection film, lamination film. 021 2.00 920 Autoclave Film with very low gel level, surface protection film, lamination film. differentiated grades Our linear metallocene catalysed polyethylene film combines excellent processability with outstanding optical properties, transparency and gloss, and mechanical properties such as stretchability, weldability and puncture resistance. High performance film. Metallocene polyethylene Grade MFI Density Process Gloss Haze Additives Application 190ºC; 2.16 kg ISO 1183 Kg/m 3 60º ASTM D-2457 % ASTM D-1003 Antiblock Slip MF1810 1.00 918 Loop 130 5.00 Excellent mechanical and optical properties, seal layer in coextrusions, heavy duty packaging, stretch hood. MF1810AC 1.00 918 Loop 103 9.00 Excellent mechanical and optical properties, seal layer in coextrusions, heavy duty packaging, stretch hood. The information contained herein is based on REPSOL QUIMICA s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
Extrusion coating high MFI. Low density polyethylene Grade MFI Density Process Application 190ºC; 2.16 kg ISO 1183 Kg/m 3 PE041 4.00 920 Autoclave Extrusion coating, coextruded thin film, cast film. PE071 8,00 919 Autoclave Extrusion coating. 1970C 7,50 920 Autoclave Extrusion coating. PE019 20.00 919 Autoclave Masterbatches, extrusion coating. 2322M 22.00 923 Autoclave Masterbatches, extrusion coating. PE022 70.00 915 Autoclave Masterbatches, hot sealing adhesive, caps and closures, wax blends. 17070M 70.00 917 Autoclave Masterbatches, hot sealing adhesive, caps and closures, wax blends. 17150M 150.00 916 Autoclave Masterbatches, hot sealing adhesive, caps and closures, wax blends. PE023 150.00 916 Autoclave Masterbatches, hot sealing adhesive, caps and closures, wax blends. We also have grades optimised for the most modern extrusion coating systems. The information contained herein is based on REPSOL QUIMICA s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
Extrusion. EVA/EBA Copolymer Grade MFI Comonomer* Process Application 190ºC; 2.16 kg % PA537 0.70 18 AV Autoclave Stretch agricultural and industrial film, stretch hood. PA539 2.00 18 AV Autoclave Stretch agricultural and industrial film, stretch hood, coextrusion, thermofusible bags. PA430C 3.00 24 AV Autoclave Extrusion coating, coextrusion, thermo adhesive film, thermofusible bags. PA439C 3.50 27 AV Autoclave Extrusion coating, coextrusion, thermo adhesive film, thermofusible bags. PA303 0.30 3 AB Autoclave Stretch hood, agricultural film. PA803C 0.30 8 AB Autoclave Stretch hood, agricultural film. PA1303 0.30 13 AB Autoclave Stretch hood, agricultural film. PA1704 0.40 17 AB Autoclave Stretch agricultural and industrial film, stretch hood. PA1715 1.50 17 AB Autoclave Stretch agricultural and industrial film, stretch hood. PA1770 7,00 17 AB Autoclave Extrusion coating, coextrusion. PA420L 20.00 20 AV Autoclave Extrusion coating, coextrusion. * AV: Vinyl acetate, AB: Butyl acrylate Repsol offers a wide range of EVA/EBA copolymers indicated for producing film and stretch sleeves, agricultural film and extrusion coating. The information contained herein is based on REPSOL QUIMICA s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
Extrusion. Polypropylene Grade Type MFI Flexural modulus of elasticity ISO 178 MPa Tensile strength at yield ISO 527 MPa Izod impact strength notched Additives Application 230ºC; 2.16 kg Antiblock Slip Antistatic PP034W3F PPH 2.20 1 300 35 5,00 Bioriented or metallised film. PP044W3F PPH 3.00 1300 36 4.50 Bioriented or metallised film. PP064S1F PPH 9.00 1500 35 3.00 Cast film. PP064W1F PPH 9.00 1500 35 3.00 General purpose, cast film, metallised film. PB120G1F PPC 0.95 1100 21 40.00 Tapes, blown film, lamination and co-extrusion. PB130G1F PPC 1.30 1100 27 30.00 General purpose, cast or blown film with low temperatures requirement. PB150G1F PPC 7.00 1150 27 9.00 General purpose, cast film with low temperatures requirement. PB154M1F PPC 7.00 1 100 27 15.00 Food packaging film with excellent impact resistance at low temperaute, retortable, sterilisable. PB170G1F PPC 11.00 1150 27 9.00 General purpose, cast film with low temperatures requirement. PR255W1F PPR 8.00 700 9.00 Cast film of high transparency, multilayer film and stretch film. PR264G1F PPR 9.00 950 25 8.00 Cast film, foamed. PR264M1F PPR 9.00 950 25 8.00 Cast film. PR264S1F PPR 9.00 950 25 8.00 Cast film. PX452AF PPR 5.00 Matt film: excellent film quality, transparency, low level of gloss and high haze. PX262CF PPR 9.50 500 Peel film, food packaging film, lamination film and coextrusion. PPH: Homopolymers, PPC: Heterophasic copolymers, PPR: Random copolymers Wide range of PP for cast film and BOPP to comply with the requirements for each application: rigidity, cold impact resistance, stretchability and low sealing temperature. Peelable grades, matt grades for coextrusion and ultraclean grades The information contained herein is based on REPSOL QUIMICA s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
Technical service and development Repsol s capacity for innovation and appropriate resources, including its Technology Centre, are at its clients disposal in the interests of continued improvement and development of its products. We optimise products and their performance at our clients sites, in accordance with current standards and the requirements of the application, thus offering solutions, supporting development. These are competitive advantages for both parties. Quality, safety and environment All petrochemical plants and part-owned subsidiaries run by Repsol Química are compliant with the current ISO 9001:2008 standards, for the quality of processes from manufacture to distribution, transport management and end product warehousing. Petrochemical complexes, packaging facilities and logistics centres all have OHSAS 18001.2009 (Occupational Health and Safety Assessment Series) certification for their rigorous safety measures. They also have ISO 14001 certification for their environmental management and the reduction of the impact of their facilities; and ISO 14064 for the annual verification of greenhouse gas emissions. A comprehensive range of LDPE, HDPE, EVA, EBA, mlldpe and PP characterized by their excellent mechanical and optical properties. November 2015 The information contained herein is based on REPSOL QUIMICA s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
Offices & Customer Care SPAIN Customer Care Tel.: + 34 900 10 32 39 Tel.: + 34 91 753 18 01 sacrq@repsol.com GERMANY Customer Care Tel.: + 800 60 504 444 Tel.: +34 91 753 18 00 sac.deutschland@repsol.com PORTUGAL Customer Care Tel.: + 800 60 501 111 Tel.: +34 91 753 18 05 sacrq@repsol.com UNITED KINGDOM Customer Care Tel.: + 800 60 502 222 Tel.: +34 91 753 18 03 sac.uk@repsol.com FRANCE Customer Care Tel.: + 800 60 503 333 Tel.: +34 91 753 18 02 sac.france@repsol.com ITALY Caldera Business Park Palazzo D- Ala 1-3º Piano Via Caldera 21 20153 Milano Customer Care Tel.: + 800 60 509 999 Tel.: +34 91 753 18 04 sac.italia@repsol.com REST OF THE WORLD English Customer Care Tel.: +34 91 753 18 06 French Customer Care Tel.: +34 91 753 18 07 exportchemicals@repsol.com
Corporate Headquarters Méndez Álvaro, 44 28045 Madrid (Spain) Tel.: +34 91 753 81 00 www.chemicals.repsol.com Technical Service & Development Repsol Technology Centre Ctra. de Extremadura A5, km 18 28931 Móstoles. Madrid (Spain) Tel.: +34 91 753 86 00 atd_poliolefinas@repsol.com