Product Brochures Fiber Crete Composite Castables

Similar documents
Product Brochures Fiber Crete Composite castables

Engineered Isostatic Ceramics. Specializing in products for the continuous casting of steel

Current Refractory Technology and Practices in the Steel Industry

REVISIONS F COLOR. F ITEM UNLESS OTHERWISE SPECIFIED: 1. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

PRODUCT LIST (REFRACTORIES)

Ted Dickson, TAK Industrial Mineral Consultancy. Global Refractory Markets as a market for bauxite and alumina

Refractory Alternatives to Combat Elephant's Foot Erosion and Top Cap Wear in Coreless Furnaces

REFRACTORY PRODUCTS. This product catalogue is compacted for electronical submission without references and illustrations for typical applications.

Recovery of spent refractories: how to do it and using them as secondary raw materials for refractory applications

Fire Clay Brick. Pyrophylite Brick. Pyrophylite -SiC-C brick. Pyrophylite -SiC brick. High Alumina Brick. Alumina-SiC-C Brick.

CATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES INSULATING REFRACTORY CASTABLES...

Refractories 1999 U S C E N S U S B U R E A U. Current Industrial Reports. Helping You Make Informed Decisions. (Formerly Series No.

VALUE ENHANCEMENT THROUGH ENGINEERED ALUMINA PRODUCTS FOR MONOLITHIC AND BRICK APPLICATIONS

THE REFRACTORIES INDUSTRY WORLDWIDE

D A N D E ACC BOX ASSEMBLY

SHARADAA PRECAST LANCES PRECAST SHAPES INSULATING BOARDS COATINGS SHARADAA CERAMICS PVT LTD

RECYCLING OF SPENT REFRACTORIES. Melvyn Bradley, Technical Director, LKAB Minerals

DALMIA SEVEN understands your specific requirements and serves them innovatively with the most advanced technology.

S t e e l Ladle. Steel cleanliness is safeguarded by high alumina-spinel products

AFS 500 Installation Manual. Telecom-Small Wind

Raw Material challenges in refractory application. Fraunhofer Institute for Laser Technology ILT - Germany

Low Cement Castables. SUGGESTED HEATING PROCEDURES for RESCO LOW, ULTRA-LOW, AND NO CEMENT CASTABLES

European Refractory Markets. IA. Dr. Jürgen Puhl

White Fused Alumina. Specifications: Best Coarse Coarse Normal part Mixed part 100%pass these mesh NO. Grain size. Fine part.

ADD PROTECTION RETAIN HEAT. Need ladle solutions to optimize refractory performance? We ve got you covered. alliedmineral.com

The generic requirements from blast furnace refractories are summarised below:

New Possibilities for Refractory Castable

REFRACTORIES FOR MOLTEN IRON & STEEL

CARBORUNDUM UNIVERSAL LIMITED

Tabular Alumina Market what are the prospects for growth by Martin.Z.Ma

Quick Dry Refractory Castables to Reduce the Downtime of Foundry Furnaces

Refractory Lining and Wear in the TORPEDO LADLE

1.6.3 Measurement of Linear Coefficients of Thermal Expansion Thermal Strains Thermal Shock

Chapter One INTRODUCTION

AGC Ceramics Co., Ltd. AGC Ceramics Co., Ltd.

SilplateTM Structural Insulating Board. The Revolutionary Lining System For Processing And Transportation Of Molten Metal

Table of Contents. Chapter 1 Designing refractory castables. Chapter 2 Fundamentals on particle dispersion. Foreword

R e h e at Furnace. DALMIA SEVEN understands your specific requirements and serves them innovatively with the most advanced technology.

Z E H N E G N Z G H Z O H U

Properties and corrosion of alumina-magnesia-carbon refractories

Magnesium Aluminate Spinels

Flair Group. For appropriate and simple solutions. Introduction. Industries Served. Supplied Refractories

HIGH PERFORMANCE REFRACTORIES.

Refractories for Pig iron ladle

MULLITE AND OTHER ALUMINO- SILICATE REFRACTORIES VIS-À-VIS ALUMINA - SILICA (AL2O3 - SIO2) BINARY PHASE DIAGRAM

Can Fluorspar be replaced in steelmaking? Eugene Pretorius Baker Refractories

Original papers. M. R. Pouyamehr, Z. A. Nemati*, M. A. Faghihi Sani*, R. Naghizadeh**

Global Innovation for your High Temp World

REFRACTORIES. Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks

Slide Gate Refractories

RECYCLING REFRACTORIES FROM AN ENDUSER S VIEWPOINT

Efficiency in Steel Melting: Ladle Development

Certified Reference Material Series for X-ray Fluorescence Analysis of Refractories JRRM (Series No.1 for Fireclay Refractories)

MSE 351 Engineering Ceramics I

Improvement of the binder system of Refractory Castables with advanced Calcium Aluminate Cements " Authors: Nikolaus Kreuels, Holger Schaffhauser

Ceramic Processing Research

Team Work - Failure Case Studies

Stopper nose. VISO Tundish Stopper. Geometry. RippleTM Stopper. A stopper with a nose geometry that features:

N McEwan, Verref. Chromite A critical raw material for the Refractory Manufacturer

Chapter 2.5: Insulation & Refractories

Bollard Chain Eye 3/8" (Powder Coated) Quick Link Connector 5/16" (Powder Coated) Optional Accessories:

High Value added Refractories for high Quality Steelmaking

Coda Collection. Landscape Furniture Coda Collection. Landscape Furniture Coda Collection Landscape Furniture

Refractories: 2001 Issued October 2002

TECHNOLOGICAL PROCESS OF BOMEX REFRACTORY PEHCEVO

IRON&STEEL THE PERFECT CASTING

IMPROVING THERMO-MECHANICAL PROPERTIES OF TABULAR ALUMINA CASTABLES VIA USING NANO STRUCTURED COLLOIDAL SILICA


TAK Industrial Mineral Consultancy. The Outlook for Refractories as Markets for Bauxite and Alumina

ABOUT ALLIED. Global Refractory Solutions

Alternatives for Zircon Stucco and Flour

REDUCING REFRACTORY COST USING NEW ASCC BRICKS FOR HOT IRON TRANSPORT

CHAPTER 3 MATERIALS AND MIX PROPORTIONING

Castament. Review. BASF Construction Polymers GmbH * Dr. J. v. Seyerl * March 2008 * 1 [Pfad.ppt]

Global Innovation for your High Temp World

GLASS INDUSTRY REFRACTORY & LINING PRODUCTS FOR HIGH TEMPERATURE APPLICATIONS

4900 ASSEMBLY 5/03/2016 KK

Magnesia-carbon refractories for the lining of gasification chambers: technical capabilities and limitations

Lecture 26 Degassing Practice

Karsten Agersted

Silica Fume Concrete

NEW COARSE TABULAR AGGREGATES FOR IMPROVED CASTABLES

Technical Paper. C. Wöhrmeyer* 1 ; J.M. Auvray 1 ; B. Li 1 ; H. Fryda 1 ; M. Szepizdyn 1 ; D. Pörzgen 2 ; N. Li 3 ; W. Yan 3.

FangYuan Group LTD. The World s Leader in Refractory Materials. Blast Furnace Lining Products

ADVANTAGES OF DENSE CALCIUM HEXALUMINATE AGGREGATE FOR BACK LINING IN STEEL LADLES

specialist refractory solutions

Effect of Silicon Carbide on Reactions between Molten Steel and Fused Magnesia Silicon Carbide Composite Refractory

Dense Refractories Product Data

Refractor y Systems Direct Reduction Plants

LINING SYSTEMS HIGH PERFORMANCE LINING TECHNOLOGY FOR ALUMINIUM FOUNDRIES. + + Excellent refractoriness. + + Consistent performance

INTRODUCTION TO CERAMICS, DR KASSIM AL-JOUBORY UNIVERSITY OF TECHNOLOGY BAGHDAD -IRAQ

Our products have been developed for the special operating. Our services. Our solutions

COMPANY PRESENTATION 1 REFRACTORY GRADES 4 FURNACE BOTTOM PAVING 5 EXTRA LARGE AND SPECIAL SHAPES 6-7 COMPLETE FOREHEARTH PRE-ASSEMBLY 8

Naigai CERABEADS 60 for Any Kind of Metal

GRANULATION OF FERROALLOYS RESULTS FROM INDUSTRIAL OPERATIONS AND COMPARATIVE STUDY ON FINES GENERATION

Minerals Processing Industry Cement & Lime

by Dimitris E. Tsakonitis (Refractory Business Unit Manager, GRECIAN MAGNESITE S.A Polygyros, GREECE)

COPPER SMELTER PROJECTS & SERVICES

WATER BASED COATINGS ALCOHOL BASED COATINGS DILUENT AGENTS. Efficient coating must provide the following features:

WPE - Go4Cement Wear protection systems

Transcription:

Product rochures Fiber rete omposite astables P.O. OX 264334 TL: +27 (016) 422 9955 THR RIVRS. RS. 1935. FX: +27 (016) 422 9991 9 TLFOR STT LL: +27(0) 82 774 3632 UNNVILL -MIL: info@deltaref.com VRNIGING. RS. 1930 Website: www.deltaref.com

Fiber rete omposite castables Introduction to Fiber rete omposite castables ackground We at elta Refractories have developed the Fiber rete range of castables for a very specific reason: our clients we needed a very strong castable with extreme thermal shock resistance properties. These castables find application in the industries where normal castables and bricks are failing due to a lack of sufficient thermal shock resistance properties and not enough mechanical strength at low, intermediate and high temperatures. Product Information The Fiber rete range of products are all composites of stainless steel and a ceramic matrix. The stainless steel needles provide the thermal shock resistance and the ceramic matrix acts as the binder system. The composition of the ceramic binder system and the grade and percentage stainless steel needles are parameters, which form part of product design in order to meet the specific needs of the end user. When we design the ceramic matrix, we may incorporate minerals and materials such as spinel, tabular alumina, corundum, fused alumina, andalusite, Si, zircon, zirconia, green chrome oxide, magnesia and others. The selection is of raw materials is influenced by the chemical and physical properties we aim to engineer into the final product. The same selection criteria are applied when selecting the grade and percentage stainless steel needles. Please contact our technical department for more information regarding the products and their properties as well as prices. These products are only supplied and sold as precast shapes. In order to make the precast, we require end user supplied drawings. Our ngineers will make drawings and after client approval, we can make moulds for the precast shapes. elow we list a few products we have designed and sold during the past few years. rand name elta Fiber rete 200 elta Fiber rete 201 elta Fiber rete 202 elta Fiber rete 203 elta Fiber rete 204 elta Fiber rete 206 elta Fiber rete 207 elta Fiber rete 208 elta Fiber rete 209 elta Fiber rete 210 escription Tabular alumina based ndalusite based luminium metal resistant Spinel based lkali resistant Tabular alumina and zirconia based Tabular alumina and zircon based Tabular alumina and magnesia based Tabular alumina and zirconia based Tabular alumina and green chrome oxide based Revised: 2013/07/17 Page 2 of 10

Fiber rete omposite castables Transfer ladle pouring Revised: 2013/07/17 Page 3 of 10

Fiber rete omposite castables asting ladle lip ring blocks 1 2 3 4 5 6 THIR NGL PROJTION 2546 2340 100 312 R 2000 R 1688 R 1758 70 82 160 R 1840 80 80 135 60 100 70 TIL OF LIFTING RINGS 75 O 30MM I 20MM 270 100 100 T: 10/07/2013 RWN Y: L. GRFF RVISION No: 4 LINT: RLORMITTL N LINT RF NO: RWING No: N 07240/13 VOLUM: MTRIL: NSITY: 0.09938 m^3 LT FIR RT 200 RVISIONS: 1 2 3 4 5 6 MSS: 3200 kg/m^3 318.016 kg N TITL: NOT PPROV FOR MNUFTUR UNLSS SIGN T TIL OF SOKT FOR OLTS SIGNTUR TRNSFR LL LIP RING - SON TRIL Revised: 2013/07/17 Page 4 of 10

Fiber rete omposite castables Tundish corner pieces 1 2 3 4 5 6 O NOT SL THIR NGL PROJTION IF IN OUT SK 150 02 1090 150 5 01 60 788 70 150 60 270 200 180 300 ate: Material: 30/11/2011 rcelormittal - Vanderbijlpark elta Fibre rete 200 rawn y: lient Ref No: L. Greeff N 217.274 kg Scale: 1:10 rawing No: 044/1/11 lient: Revision No: 1 Revision: 01 - imension 02 - imension 1 2 3 4 5 6 Title: Volume: Mass: ensity: 0.06790 m^3 3200.000 kg/m^3 Fiber rete 5 egree Insert for V1 & V2, Tundish orners Revised: 2013/07/17 Page 5 of 10

Fiber rete omposite castables Torpedo slag stopper 1 2 3 4 5 6 O NOT SL PROJTION IF IN OUT SK 700 400 700 Item Number 3 elta Fibre rete 200 4 elta ast 415 Material Quantity Volume Mass (Item) Mass (Quantity) ensity 1 0.06643 m^3 212.573 kg 212.573 kg 3200.000 kg/m^3 2 0.01947 m^3 51.601 kg 103.201 kg 2650.000 kg/m^3 76,1 02 O 203 4 3 203 42,16 42,16 01 1057 O 203 760 900 ate: lient: Revision No: 1 rawn y: Scale: 18/10/2011 L. Greeff 1:25 rcelormittal Vanderbijlpark lient Ref No: V0014-0020-0509.001 032/1/11 rawing No: Title: Rev: 01 iameter 02 Material Torpedo Slag Retainer 1 2 3 4 5 6 Revised: 2013/07/17 Page 6 of 10

F Lauders Fiber rete omposite castables Revised: 2013/07/17 Page 7 of 10

Fiber rete omposite castables opper launder bend Revised: 2013/07/17 Page 8 of 10

Fiber rete omposite castables Slag scrapers 1 2 3 4 5 6 THIR NGL PROJTION 185 O 30 70 300 700 300 160 130 770 770 270 270 700 70 T: 25/06/2013 RLORMITTL VNRIJL RWN Y: L. GRFF RVISION No: 7 LINT: LINT RF NO: RWING No: N 114/7/13 VOLUM: MTRIL: LT FIR RT 200 NSITY: 0.02922 m^3 RVISIONS: 1 2 3 4 5 6 MSS: 3200 kg/m^3 93.518 kg N TITL: NOT PPROV FOR MNUFTUR UNLSS SIGN T SLGGING L - LT ONPT SIGNTUR Revised: 2013/07/17 Page 9 of 10