REIMAGINE METAL COLOR THAT TRANSFORMS
TRANSFORM Your Design. Color is perception, but performance is reality. At CENTRIA, our color-matching technology has been refined for more than a century, giving your metal walls dramatic hues and textures that last. With the ability to withstand even the most demanding environmental conditions, our full line of color coatings combine both art and science. Reimagine metal with the coatings and colors of CENTRIA.
PRISMATIC SOLID COLOR SERIES S Fluorofinish Coating System is a durable, solid-color finish for architectural applications. The graffiti-resistant, PVDF coating contains 70% Kynar 500 /Hylar 5000 resins. Versacor ELITE Coating Systems are premium, high-build, multi-layer metal coating systems that provide the highest levels of protection in the harshest climatic or environmental conditions. Versacor ELITE PF features a solid color PVDF top coat. Versacor Elite MX has a PVDF pearlescent effect top coat. Both coatings are excellent for corrosive architectural applications and abrasion resistance. PRISMATIC SERIES COLORS Available in a wide range of colors and Fluorofinish, Duragard and Versacor Elite Coating Systems. 79 Regal White 996 Crushed Ice 99 Off-White 995 Cambridge White 0 Bone White 99 Colonial White 50 Marble 99 Lee Ivory Sandstone 760 Limestone. 0.8 mil [0 micron] nominal PVDF Color Coat*. 0. mil [5. micron] nominal Primer. Metal Substrate Surrey Beige 990 Light Seawolf 99 Pebble 997 Prism Yellow 5 Aged Copper Duragard Coating Systems offer a high-build architectural finish that provides reliable performance in color retention and fade resistance. Added protection is obtained with our Duragard Plus coating that includes an additional 0.8 mil PVDF clear top coat.. 0.8 mil [0 micron] nominal PVDF Top Coat..0 mil [50.8 micron] nominal Versacor Elite Barrier Coat Primer. Metal Substrate G-90 galvanized steel, aluminum 977 Moss 99 Cypress Olive 978 Hunter Green 8 Evergreen 99 Hartford Green Versacor ELITE AM combines the superior corrosion resistance of the Versacor Elite barrier coat with a PVDF metallic color coat and the extra protection of another clear coat. 77 Slate Blue 996 Arabian Blue 97 Teal Blue 998 Cherokee Blue 00 Deep Blue Sea 990 Night Horizon 99 Granite 97 Chromium Gray 997 Light Gray 998 Dove Gray Duragard Plus. 0.8 mil [0 micron] nominal PVDF Clear Coat*. 0.8 mil [0 micron] nominal PVDF Color Coat*. 0.8 mil [0 micron] nominal Primer. Metal Substrate Duragard 0.8 mil [0 micron] nominal PVDF Color Coat* 0.8 mil [0 micron] nominal Primer. 0.5 mil [.7 micron] nominal Clear Coat. 0.8 mil [0 micron] nominal PVDF Metallic Effect Color Coat..0 mil [50.8micron] nominal Versacor Elite Barrier Coat. Metal Substrate G-90 galvanized steel, aluminum 999 Fashion Gray 8 Slate Gray 99 Steel Gray 99 Charcoal Gray 99 Midnight Bronze 5 Dark Bronze 996 Rich Black 99 Sage Brown Mocha 997 Mauve Please note all finish thicknesses shown are nominal. *Polyvinylidene Fluoride (PVDF) coat contains 70% Kynar 500 or Hylar 5000 resin Kynar 500 is a registered trademark of Arkema Inc. Hylar 5000 is a registered trademark of Solvay Solvents, Inc. What is Reverse Side Coating Protection? As an added layer of protection for exterior walls, -mil-thick [50.8 micron] Versacor barrier coat with a 0.5 mil [.7 micron] polyester topcoat (59 Arctic Ice) is applied to the interior liner of the metal substrate to protect against corrosion. 56 Colonial Red 999 Aspen Gold
SUNDANCE MICA AND METALLIC SERIES S Sundance Mica is a -coat system that provides a pearlescent appearance. Sundance Mica is a high performance PVDF finish that is an excellent, cost effective alternative to metallic finish systems requiring clear coats. SUNDANCE SERIES COLORS Sundance Series Colors are scintillating micas and bright metallics that create truly dynamic aesthetics for your building. The appearance of Sundance Series colors can change as the sun moves across the sky, making color an active facet of your design. SUNDANCE MICA -COAT 996 Silversmith 997 Gray Velvet 998 Champagne Bronze 999 Copper 9987 Bronze II. 0.8 mil [0 micron] nominal PVDF Color Coat*. 0. mil [5. micron] nominal Primer. Metal Substrate 995 Champagne Pearl 9989 Platinum 9988 Brick II 995 Jade 9955 Blue SUNDANCE AM ALUMINUM METALLIC -COAT Sundance AM is a polyvinylidene fluoride (PVDF) -coat system that incorporates metal flakes in the color coat. A clear top coat protects the metal flakes and results in an outstanding metallic effect. 9956 XL Rosalind Rose 9957 XL Silver 9958 XL Champagne Gold 9959 XL Light Bronze 9960 XL Medium Gray 996 XL Silver Gray 996 XL Copper 996 XL Medium Metallic Bronze 9965 XL Dark Bronze 9967 XL Pewter. 0.5 mil [.7 micron] nominal PVDF Clear Coat*. 0.8 mil [0 micron] nominal PVDF Color Coat*. 0. mil [5. micron] nominal Primer. Metal Substrate KOLORSHIFT IRIDESCENT SERIES KOLORSHIFT SERIES COLORS Kolorshift Series is an iridescent polyvinylidene (PVDF) architectural coating that offers a whole new world of design possibilities. The color of the metal surface will change depending on the viewing angle or direction of sunlight. The result is a continuous iridescent color gradient. Cost of CENTRIA coatings may vary depending on specific color and finish selection. Colors shown in this brochure are for preliminary selection only. Printed colors can vary from actual painted metal samples before final selection. CENTRIA panel finishes are applied using the coil coating process. Metallic and mica finishes may exhibit some directionality in the coating color. When specifying micas and metallic colors directionality of the coating must be considered during estimating, fabricating, and installation. 7 Hemlock 7 Dusty Rose 7 Green Shimmer 7 Purple Rain 75 Lightning Storm. 0.8 mil [0 micron] nominal PVDF Top Coat*. 0.5 mil [.7 micron] nominal Base Coat. 0. mil [5. micron] nominal Primer. Metal Substrate
CUSTOM COLOR ALLURA EARTH TONE SERIES Custom Color coatings are durable PVDF based finishes available in -coat and -coat systems. These color coatings offer a bright, vibrant color to any architectural application. If your color choice is not found among our standard colors, contact CENTRIA for a custom color match. Allura is a premium PVDF coating that provides a matte, low-gloss finish, combined with a subtle aggregate texture.. 0.8 mil [0 micron] Color Coat. 0. mil [5. micron] nominal PVDF Primer. Metal Substrate ALLURA SERIES COLORS. 0.5 mil [.7 micron] nominal PVDF Clear Coat* (where required). 0.8 mil [0 micron] nominal PVDF Color Coat* 78 Adobe 78 Lava Rock 78 Sienna 78 Clay 785 Sedona. 0. mil [5. micron] nominal Primer. Metal Substrate ALLUSION FAUX FINISH SERIES Allusion is a pre-finished coating that simulates expensive natural finishes accurately and cost-effectively. ALLUSION SERIES COLORS 76 Light Oak 76 Dark Oak 76 Rust 76 Slate 765 Antique Bronze 766 Blue Zinc 767 Red Zinc 768 Crystal Zinc 769 Green Zinc. 5 mil [.5 micron] nominal PVDF Clear Top Coat. 0.05 mil [.7 micron] nominal PVDF printed ink finish Stock color Non-stock colors may be subject to a minimum quantity requirement or small order charges. Please consult CENTRIA. STANDARD BACKER COLOR. 65 mil [6.6 micron] nominal Color Base Coat (also acts as Primer). Metal Substrate 59 Polyester Arctic Ice Interior Use Only Unless specified otherwise, CENTRIA will provide a standard backer coat on the reverse side of single skin panels. Color may vary. Polyester Arctic Ice is the standard finish offering for the interior surfaces of foam panels. Other finishes available upon request.
The art and science of color. Reimagined by CENTRIA. Color has the power to instantly inspire, to transform a design. Color can energize, it can make a statement, it can create a feeling. It connects us with our world. CENTRIA and Valspar join forces to provide a wide selection of colors and high-performance coating systems.
CENTRIAPerformance.com.800.759.77 005 Beaver Grade Road Moon Township, PA 508-9 Phone:.99.8000 Fax:.99.87 Descriptions and specifications contained herein were in effect at the time this publication was approved for printing. In a continuing effort to refine and improve products, CENTRIA reserves the right to discontinue products at any time or change specifications and/or designs without incurring obligation. To ensure you have the latest information available, please inquire or visit our website at CENTRIAperformance.com. Valspar is a registered trademark of The Valspar Corporation. Reference CAS-0/7 0M PG/GCS. Copyright 07 CENTRIA, an NCI Building Systems company Printed in the U.S.A.