Keynote Speaker and Chairman of Session 25 FUEL CELLS

Similar documents
Numerical Studies of PEM Fuel Cell with Serpentine Flow-Field for Sustainable Energy Use

CURRICURUM VITAE DAE HUN CHUNG, PH.D.

Curriculum Vitae. Professor Yoon-Seok Chang, Ph.D.

NO x gas response characteristics of thin film mixed oxide semiconductor

Hyeong-Min Jeon. Hyeong-Min Jeon, Dec Address Division of Ocean Systems Engineering, Eureka Hall,

Joint Workshop for e-government and Smart City Towards Sustainable Development

CURRICULUM VITAE. Moon Hyung Jang

Yong Gu Suh. Professor of Marketing. Biography. -Research Areas. -Undergraduate/MBA Teachings. -Publications. Sookmyung Women s University

The flow-field pattern Optimization of the Bipolar Plate for PEMFC Considering the Nonlinear Material

Lee, Byoung-Hoon, September 2014 ~ May 2015 CURRICULUM VITAE: LEE, BYOUNG-HOON. Personal data. Byoung-Hoon Lee

Ceramic Processing Research

We invite you to the Third International Workshop on EEWS, whose theme is "Creating New Industries with EEWS".

Joint Implementation & Collaboration for Clean Air in East Asian Cities

Background. Objectives / Expected Outcomes

Jordan Farina, PhD February 22, 2019

What are the positions of the government and companies toward the environment?

The Job Classification System and Certification. Lists of Construction Industry - Focused on Construction Technicians

FABSTRACT. Technical Overview of Fuel Cell Systems: How Computer Simulation is Used to Reduce Design Time

DEVELOPMENT OF BIM STANDARD DATABASE SYSTEM FOR THE REMODELING OF DETERIORATED APARTMENT

Park, Jin Seon EDUCATION RESEARCH INTEREST / PROFESSIONAL PROFILE

Fuel Cells 101. Hydrogen Fuel Cell Educational Outreach Workshop Presented by David Cooke October 21 st, 2013

CO₂emission of FC which is the most commercialized type of household fuel cell and gas fired boiler. Therefore, energy saving effect and carbon emissi

Curriculum Vitae. (last updated: ) Min-Soo Kim

VISUALIZATION STUDY OF CATHODE FLOODING WITH DIFFERENT OPERATING CONDITIONS IN A PEM UNIT FUEL CELL

Intensive Workshop for Sustainable Seawater Desalination in Hong Kong: Membrane-based Desalination Processes (Desal-Pro)

Advanced Analytical Chemistry Lecture 10. Chem 4631

Temperature Control of Industrial Water Cooler using Hot-gas Bypass

Introduction Fuel Cells

Smart Nanocarrier Based on PEGylated Hyaluronic Acid for Cancer Therapy

Jiman Hong Ph.D./Professor

Sustainable Energy Science and Engineering Center. Fuel Cell Systems and Hydrogen Production

Laboratory of Advanced Ceramics for Energy and Environment Introduction Prof. Younki Lee

Experimental study on evaporation characteristics of a hydrogen peroxide droplet at elevated temperature

Dynamic Modeling and Analysis of PEM Fuel Cells for Startup from Subfreezing Temperatures

RENEWABLE OPTIONS OF FUTURE MOBILITY: BEYOND OIL

Impacting Rapid Hydrogen Fuel Cell Electric Vehicle Commercialization

Mass Transport Analysis of a PEM Fuel Cell (High Temperature-PEMFC) Under Different Operating Conditions

Photoresist and Process Issues on 193nm Immersion Lithography

Petronilla Fragiacomo is an Associate Professor in Energy and Environment Systems at the University of Calabria.

Teaching About Hydrogen Fuel Cells

Designing and Building Fuel Cells

Projects endorsed by the South Korean Ministry of Science, ICT and Future Planning (MSIP)

Design of Prototype Supercritical CO2 Superheater Heat Exchanger

EFFECT ON PERFORMANCE OF ENGINE BY INJECTING HYDROGEN

Curriculum-Vitae. ZHCET, AMU Aligarh Mobile:

Research on Influence of Job Characteristics of Social Workers at Welfare Institution for the Disabled on their Emotional Labor

DYNAMIC SIMULATION OF A PROTON EXCHANGE MEMBRANE FUEL CELL SYSTEM FOR AUTOMOTIVE APPLICATIONS

Fuel Cell Performance Augmentation: Gas Flow Channel Design for Fuel Optimization

Jing Su and Chang-Won Park Dept. of Chemical Engineering, University of Florida, Gainesville, FL 32611

CURRICULUM VITA. Jaeheum Yeon, Ph.D.

Original Publication: International Journal of High-Rise Buildings Volume 6 Number 3

A Development of the Multi-item Water Quality Monitoring System Using Markov Process

Jungshik Kang, Ph.D.

Simulation effect of operating temperature on performance of PEMFC based on serpentine flow field design

Chamber Temperature Measurement of Micro PCR Chip Using Thermocouple

Influence of discharge characteristics on methane decomposition in dielectric barrier discharge reactor

Curriculum Vita. Dong Hoo Kim, Ph.D.

CURRICULUM VITA. Jaeheum Yeon, Ph.D.

Monday, September 18, 2017 Presentation: From Muscles to Plants Nature-Inspired Multifunctional Metastructures 8:00 am - 9:20 am Ballroom 2&3

Journal of Mechanical Science and Technology 25 (8) (2011) 1961~ DOI /s

ANALYSIS OF EXCESSIVE HEATING ON THE THERMAL AND ELECTRICAL RESISTANCE OF A POLYMER ELECTROLYTE MEMBRANE FUEL CELL. W. A. N. W. Mohamed and R.

Towards the development of low cost non-platinum based catalysts for catalytic water splitting

Effect of Hydrogen Enriched Hydrocarbon Combustion on Emissions and Performance

Syracuse Science & Technology Law Reporter

PEM Fuel Cell Investigation at Chiang Mai University, Thailand

Experimental investigation of dynamic responses of a transparent PEM fuel cell to step changes in cell current density with operating temperature

Hyun Woo Chris Lee, Ph.D.

Your partner for sustainable hydrogen generation siemens.com/silyzer

Software qualification for digital safety system in KNICS project

Hybrid Electric Vehicle Technology Certificate To be offered as a Purdue Certificate at IUPUI

M.SE. in Aerospace Engineering, University of Michigan, Ann Arbor, MI 2011 GPA: 8.30/9.00 (A + =9.0, A=8.0)

Supporting Information

PEER-REVIEWED JOURNAL PUBLICATIONS

ctbuh.org/papers Optimal Combination between Concrete Strength and Sets of Forms in High-rise Building Title:

Author s response to reviews

A Study on the de-nox Activity of V2O5-Sb2O3/TiO2 SCR Catalyst at Low Temperature According to the Wash Coating Conditions

Fenton Oxidation Process Control Using Oxidation-reduction Potential Measurement for Pigment Wastewater Treatment

Journal of Power Sources

Accelerated Stress Tests in PEM Fuel Cells: What can we learn from it?

THE HOT GAS DESULFURIZATION IN A COMPACT TWO BEDS SYSTEM INTEGRATED WITH COAL GASIFICATION AND FISHER-TROPSCH SYSTEM

Experimental Measurement of Coefficient of Thermal Expansion for Graded Layers in Ni-Al 2 O 3 FGM Joints for Accurate Residual Stress Analysis

Innovative Technology for Using Bioethanol to Achieve a Low-carbon Society

Integrated Electrochemical Thermal Ammonia Production Process

Physical, Chemical and Electrical Analysis of Dust Generated from Cement Plants for Dust Removal with an Electrostatic Precipitator

Undergraduate Research Projects in MAE

DBBD17, 28. November 2017

A THEORETICAL SIMULATION OF A PEM FUEL CELL WITH 4-SERPENTINE FLOW CHANNEL

A High Temperature Gas Loop to Simulate VHTR and Nuclear Hydrogen Production System

Fuel Cells in Energy Technology (9) Werner Schindler Department of Physics Nonequilibrium Chemical Physics TU München summer term 2013

Teaching Chemistry with Hydrogen and Fuel Cells. Maia Willcox. SEPUP Lawrence Hall of Science UC Berkeley. WSST Madison Friday, March 9, 2012

Industrial Collective Research on Fuel Cells

Supporting Information

The East Asian Weed Science Congress in Commemoration of 30 th Anniversary of KSWS

AC : DESIGN OF A LABORATORY EXPERIMENT TO MEASURE FUEL CELL STACK EFFICIENCY AND LOAD RESPONSE

1. Introduction. 2. Objectives

ENVIRONMENT-FRIENDLY HYDROGEN GAS AS FUEL IN FUEL CELL AND ITS CHALLENGES

Seismic Analysis, Design and Retrofit for Buildings and Infrastructures: From Theory to Practice

APAIB-UN Joint Conference, Tokyo, Japan

Effect of Mass Flow Rate and Temperature on the Performance of PEM Fuel Cell: An Experimental Study

Investigating Alternative Energy: Hydrogen and Fuel Cells. Maia Willcox. SEPUP Lawrence Hall of Science UC Berkeley. CSTA Conference October 21, 2011

Transcription:

Keynote Speaker and Chairman of Session 25 FUEL CELLS Including Education, Publications and Projects Hyung-Man Kim, Ph. D. Department of Mechanical and Automotive Engineering, Inje University Tel.: +82-55-320-3666, Mobile: +82-10-2038-7671 Email: mechkhm@inje.ac.kr < Contents > Fields of Study: Sustainable Energy, Hydrogen Fuel Cell and Electrolyzer, Renewable Energy, Smart Electrochemical Material, Energy Harvesting, Diesel Engine, Flexible-Fuel Utilization (Bioethanol and Biodiesel), Microgravity Combustion, Computational Fluid Dynamics & Structural FEA Simulation Professional Preparations: BA, Ma, Ph.D. degrees, Industry, Institute, University experiences Teaching Experiences: Lectures (in English), Student monitoring, Teaching-related awards Publications: Refereed fully reviewed archival journal publication and conference proceeding, Worldwide PCT and Korea patents, Research-related awards, Journal editing experiences Research Projects: List of research projects as principal investigator in the last 5 years, Media coverage of the research achievements < Professional Preparations > Bachelor degree, Feb. 26, 1987, Department of Mechanical Engineering, Seoul National University, Korea, Graduation thesis A study on sonic nozzle Master degree, Feb. 26, 1992, Department of Mechanical Engineering, Seoul National University, Korea, Master s thesis Numerical study on the structure of hydrogen/air premixed flames Ph.D. degree, Feb. 13, 1997, Department of Aeronautics & Astronautics, University of Tokyo, Japan, Doctoral dissertation A study on the hot surface ignition of methane-air mixtures using microgravity

< Professional Appointments > Mar. 1999 Present, Professor, Department of Mechanical and Automotive Engineering, Inje University. Jul. 2006 Jun. 2007, Visiting Professor, Department of Mechanical and Aeronautics Engineering, UC Davis Mar. 1998 Feb. 1999, Senior Researcher, Power Generation Laboratory, Korea Electric Power Research Institute Mar. 1997 Feb. 1998, Brain-Pool Researcher, Global Environment Research Center, Korea Institute of Science and Technology < Teaching experiences > Lectures (in English) Undergraduate courses: Power Engineering, Energy System Design, Engineering Mathematics Graduate courses: Advanced Energy Engineering, Advanced Fuel Cell System, Transport Phenomena, Environment Combustion Engineering Student Mentoring Director of ASFAR (A Society for Automotive Research) Club for Undergraduate Students, Participation in KSAE Baja (1999-2009) and Creative Electric Vehicle competition (2010-present). Director, Brain-Korea 21, Dec. 2002 Feb. 2006. Chairman, Department of Mechanical and Automotive Engineering, Dec. 2002 Feb. 2006. Careers Advisor for Undergraduate Students, Apr. 2007 Present. Director, Power System & Sustainable Energy Laboratory, 1999 Present. - Current Students: 1 Post-Doctor, 1 Doctor Candidate, 3 Master Candidates - Graduates: 1 Ph.D. (Korea Institute of Energy Research, Senior Researcher), 19 Masters Teaching-related Awards Ministry of Education and Science, Award for the student mentoring at Teacher s day, 2006.5.15. Inje University, Best Professor-Student Team of Inje English Campus Institute, 2005.6.16. Ministry of Education, Science and Technology, Grand prize of the regional Brain-Korea 21 teams, 2005.2.3. < Publications > a* = First author or corresponding author of refereed fully reviewed archival journal publication a = Coauthor of refereed fully reviewed archival journal publication

b* = First author or corresponding author of refereed fully reviewed publication in conference proceeding b = Coauthor of refereed fully reviewed publication in conference proceeding 1. Kiwon Park, Bonghwan Lee, Hyung-Man Kim a*, Gunyong Hwang, Kap-Seung Choi, Discrete regenerative fuel cell reduces hysteresis for sustainable cycling of water, Scientific Reports, 2013 (SCI, IF 2.927, under review). 2. Kiwon Park, Hyung-Man Kim a*, Kap-Seung Choi, Numerical and experimental verification of the polymer electrolyte fuel cell performances enhanced by under-rib convection, Fuel Cells Vol. 13, pp. 927-934, 2013. 10 (SCI, IF 3.149). 3. Kiwon Park, Bonghwan Lee, Hyung-Man Kim a*, Kap-Seung Choi, Gunyong Hwang, Gi-Sig Byun, Hyung-Ki Lee, IPMC Based Biosensor for the Detection of Biceps Brachii Muscle Movements, International Journal of Electrochemical Science Vol. 8, pp. 4098-4109, 2013. 3 (SCI, IF 3.729). 4. Bonghwan Lee, Kiwon Park, Hyung-Man Kim a*, Numerical Optimization of Flow Field Pattern by Mass Transfer and Electrochemical Reaction Characteristics in Proton Exchange Membrane Fuel Cells, International Journal of Electrochemical Science Vol. 8, pp. 219-234, 2013. 1 (SCI, IF 3.729). 5. Bonghwan Lee, Kiwon Park, Hyung-Man Kim a*, Dynamic Simulation of PEM Water Electrolysis and Comparison with Experiments, International Journal of Electrochemical Science Vol. 8, pp. 235-248, 2013. 1 (SCI, IF 3.729). 6. Kap-Seung Choi, Hyung-Man Kim a*, Current advances in polymer electrolyte fuel cells based on the promotional role of under-rib convection, Fuel Cells, Vol. 12(6), pp. 908-938, 2012. 12 (SCI, IF 3.149), Review article commissioned by the editor. 7. Kap-Seung Choi, Beom-Gi Kim, Kiwon Park, Hyung-Man Kim a*, Flow control of under-rib convection enhancing the performance of proton exchange membrane fuel cell, Computers & Fluids Vol. 69, pp. 81-92, 2012. 9 (SCI, IF 1.810, 1 citation). 8. Sang-Hoon Jang, Se-Joon Hwang, SangKi Park, Kap-Seung Choi, Hyung-Man Kim a*, Effects of PM fouling on the heat exchange effectiveness of wave fin type EGR cooler for diesel engine use, Heat and Mass Transfer Vol. 48, pp. 1081-1087, 2012. 6 (SCI, IF 0.896). 9. Kap-Seung Choi, Hyung-Man Kim a*, Sung-Mo Moon, An experimental study on the enhancement of the water balance, electrochemical reaction and power density in a polymer electrolyte fuel cell by under-rib convection, Electrochemistry Communications Vol. 13, pp. 1387-1390, 2011. 11 (SCI, IF 4.859, 3 citations), Excellent research achievement recognized by the Ministry of Education and Science and National Research Foundation. 10. Hyung-Man Kim a*, South Korean energy plan is unrealistic, Nature 477, 280, 2011. 9. 15 (SCI, IF 36.280), Excellent Research Award for the first publication in INJE University.

11. Sang-Hoon Jang, GiSoo Shin, Hana Hwang, Kap-Seung Choi, Hyung-Man Kim b*, Numerical Studies of PEM Fuel Cell with Serpentine Flow-Field for Sustainable Energy Use, World Renewable Energy Congress 2011, FC-0623, 2011. 5. 12. 12. Sang-Hoon Jang, SangKi Park, Kap-Seung Choi, Hyung-Man Kim a*, Experimental investigation of the influences of shape and surface area on the EGR cooler efficiency, Heat and Mass Transfer Vol. 47, pp. 621-628, 2011. 5 (SCI, IF 0.896). 13. Injae Choi, Gisoo Shin, Kap-Seung Choi, Hyung-Man Kim a*, Performance Evaluation of Micro PEM Fuel Cell through the Numerical Analysis and Fabrication of Micro-Cannel, World Electric Vehicle Journal Vol. 3 - ISSN 2032-6653, 2011. 2. 14. Kap-Seung Choi, Hyung-Man Kim a*, Sung-Mo Moon, Numerical studies on the geometrical characterization of serpentine flow-field for efficient PEMFC, International Journal of Hydrogen Energy Vol. 36, pp. 1613-1627, 2011. 1 (SCI, IF 4.054, 13 citations). 15. SangKi Park, Kap-Seung Choi, Hyung-Man Kim a*, Kihyung Lee, Influence of PM fouling on effectiveness of heat exchanges in a diesel engine with fin-type EGR coolers of different sizes, Heat and Mass Transfer Vol. 46, pp. 1221-1227, 2010. 11 (SCI, IF 0.896, 2 citations). 16. Kap-Seung Choi, Sang-Hoon Jang, Gisoo Shin, Hyung-Man Kim a*, Hyung-Chul Yoon, Mattew E. Forrest, Paul A. Erickson, Effects of stack array orientation on fuel cell efficiency for auxiliary power unit applications, International Journal of Automotive Technology Vol. 11, pp. 429-434, 2010. 6 (SCIE, IF 0.606, 1 citation). 17. Gisoo Shin, Sang-Hoon Jang, Kap-Seung Choi, Hyung-Man Kim b*, Numerical Studies of Newlydesigned Fin & Serpentine Channel in PEMFC, 5 th International Ege Energy Symposium and Exhibition, 2010. 6. 27-30. 18. Kap-Seung Choi, In-Jae Choi, Se-Joon Hwang, Hyung-Man Kim a*, J. Lars Dorr, Paul A. Erickson, An experimental study of methanol autothermal reformation as a method of producing hydrogen for transportation applications, International Journal of Hydrogen Energy Vol. 35, pp. 6210-6217, 2010. 6 (SCI, IF 4.054, 2 citations). 19. Kap-Seung Choi, Hyung-Man Kim a*, J. Lars Dorr, Hyung Chul Yoon, Paul A. Erickson, Equilibrium model validation through the experiments of methanol autothermal reformation, International Journal of Hydrogen Energy Vol. 33, pp. 7039-7047, 2008. 12 (SCI, IF 4.054, 4 citations). 20. Hyung Chul Yoon, Paul A. Erickson, Hyung-Man Kim a, Lowering the O2/CH3OH ratio in autothermal reforming of methanol by using a reduced copper-based catalyst, International Journal of Hydrogen Energy Vol. 33, pp. 6619-6626, 2008. 11 (SCI, IF 4.054, 7 citations). 21. Kap-Seung Choi, Hyung-Man Kim a*, Hyung Chul Yoon, Mattew E. Forrest, Paul A. Erickson, Effects of ambient temperature and relative humidity on the performance of Nexa fuel cell, Energy Conversion

and Management Vol. 49, pp. 3505-3511, 2008. 9 (SCI, IF 2.216, 8 citations). 22. H.-M. Kim a*, S.-K. Park, K.-S. Choi, H.-M. Wang, D.-H. Lee, Y.-S. Cha, J.-S.-Lee, J. Lee, Investigation on the flow and heat transfer characteristics of diesel engine for coolers, International Journal of Automotive Technology Vol. 9, No. 2, pp. 149-153, 2008. 5 (SCIE, IF 0.606, 5 citations). 23. Hyung-Man Kim a*, Kap-Seung Choi, Hyung Chul Yoon, J. Lars Dorr, Paul A. Erickson, An investigation of reaction progression through the catalyst bed in methanol autothermal reformation, Journal of Mechanical Science and Technology Vol. 22, No. 2, pp. 367-373, 2008. 2 (SCIE, IF 0.448, 2 citations). 24. Hyung-Man Kim a*, Dae-Hee Lee, Sang-Ki Park, Kap-Seung Choi, Hak-Min Wang, An experimental study on heat exchange effectiveness in the diesel engine EGR coolers, Journal of Mechanical Science and Technology Vol. 22, No. 2, pp. 361-366, 2008. 2 (SCIE, IF 0.448, 6 citations). 25. Hak-Min Wang, Kap-Seung Choi, Il-Whan Kang, Hyung-Man Kim a*, Paul A. Erickson, Theoretical Analyses of Autothermal Reforming Methanol for Use in Fuel Cell, Journal of Mechanical Science and Technology Vol. 20, No. 6, pp. 864-873, 2006. 6 (SCIE, IF 0.448, 5 citations). 26. Hyung-Man Kim b*, Hae-Il Jung, Hak-Min Wang, and Hyeok-Jun Tae, Numerical Analysis of Pressure Control Characteristics in a Solenoid Valve, 13 th International Pacific Conference on Automotive Engineering (IPC-13), 2005. 8. 22. 27. Hyung-Man Kim a*, Chang-Ho Kim and Dong-Je Lee, Development of Surface Welding Method for Surface Temperature Measurement of an IC Engine's Combustion Chamber, Key Engineering Materials, Vol. 297, pp. 1171-1176, 2005. 7 (SCI, IF 0.224). 28. Hyung-Man Kim a*, Chang-Ho Kim and Dong-Je Lee, In situ Measurement of Average Surface Temperature of a Diesel Engine's Combustion Chamber, Key Engineering Materials, Vol. 270, pp. 984-989, 2004. 7 (SCI, IF 0.224, 1 citation). 29. Heyokjun Tae, Chang-Ho Kim, Hyung-Man Kim b*, "Dynamic Analysis of Pressure Control Characteristics in a Pulse Width Modulation Solenoid Valve," Korean Society of Automotive Engineers Conference, 2003. 5. 2. 30. Sanghyun Cha, Jaehun Hong, Hyung-Man Kim b*, "An Experimental Study on the Development of Thermistor Anemometer," Korean Society of Automotive Engineers Conference, 2002. 10. 18. 31. Jaehun Hong, Sanghyun Cha, Hyung-Man Kim b*, "A Study on the Development of a Telemetry Temperature Measurement System," Korean Society of Automotive Engineers Conference, 2002. 10. 18. 32. Heyokjun Tae, Dong-Je Lee, Hyung-Man Kim a*, "Numerical Analysis on the Control Characteristics of a Variable Pressure Solenoid Valve," Journal of KASBIR Vol. 2 No. 2, 2002. 7. 33. Heyokjun Tae, Hyung-Man Kim b*, Hyunwoo Lee, "Numerical Analysis of Pressure Control Characteristics in a Variable Pressure Solenoid Valve," Korean Society of Automotive Engineers

Conference, 2002. 6. 30. 34. Hyung-Man Kim b*, Young Choi, Yong-Wie Seo, Dong-Je Lee and Joo-Won Choi, "Numerical Analysis of the Judder Caused on Brake Disk," Korean Society of Mechanical Engineers Conference, 2002. 5. 23. 35. Young Choi, Hyung-Man Kim b*, Dong-Je Lee, "Thermal Deformation Analysis of Brake Disk by FEM," Proceedings of the Automotive Parts Technology Innovation Center Workshop, 2002. 5. 18. 36. Hyung-Man Kim a*, Myung-whan Bae and Jae Yoon Park, "The Experimental Investigations of Recirculated Exhaust Gas on Exhaust Emissions in a Diesel Engine," KSME International Journal, 2001. 11 (SCIE, IF 0.448, 3 citations). 37. Young-Mog Son, Dong-Je Lee, Hyung-Man Kim b*, "An Experimental Study on the Development of Mini- Bomb Combustion Calorimeter," Journal of KASBIR Vol. 1 No. 2, 2001. 11. 38. Hyung-Man Kim b*, Ho-Sig Jeun, Seok-Yong Jang, "Numerical Study on the Application of High Temperature Catalytic Combustion to a Gas Turbine," Korean Society of Mechnical Engineers Conference, 2001. 6. 28. 39. Hyung-Man Kim b*, Young-Mog Son, Dong-Je Lee, "An Experimental Study on the Development of Bomb Calorimeter," Korean Society of Mechnical Engineers Conference, 2001. 6. 28. 40. Hyung-Man Kim b*, Myung-whan Bae and Jae Yoon Park, "Numerical Simulation of EGR System in a Diesel Engine," Korean Society of Automotive Engineers Conference, 2001. 3. 23. 41. Hyung-Man Kim b*, Myung-whan Bae, "Combustion Control Technology in a Gasoline Direct Engine," Journal of KSAE, 2000. 12. 42. M. W. Bae, Hyung-Man Kim b, "Exhaust Emissions Characteristics of Rice Brain Oil as a Fuel in Agricultural Diesel Engines," Korean Society of Automotive Engineers Conference, 2000. 3. 21. 43. Young-Mog Son, Hyung-Man Kim b*, Moo-Geun Kim, "Experimental Study on the Combustion Characteristics of the Solid Fuels Blended," 20 th Korean Society of Combustion Symposium, 2000. 5. 26. 44. Hyung-Man Kim b*, S. H. Yang and S. C. Kim, "Study on the Blended Coal Combustion Characteristics," 2 nd Korea-China Joint Workshop on Coal Utilization Technology, pp. 79-96, 1998. 11. 3. 45. Hyung-Man Kim b*, Seung Han Yang and Sung Chul Kim, "Experimental Study on the Combustion Characteristics of Blended Coals," The 4 th JSME-KSME Conference, B111, 2000. 10. 46. Hyung-Man Kim a*, Jong-Soo Jurng and Jurgen Vehlow, "Modern Strategies in Waste Incineration," Journal of Korea Solid Wastes Engineering Society Vol. 14 No. 8, 1997. 10. 47. Hyung-Man Kim a*, "Simple, Reliable and Inexpensive Technical Strategies in Waste Incineration," Journal of Inje University Vol. 14 No. 3, 1999. 2.

48. H. Enomoto, Hyung-Man Kim a, M. KONO, T. Kadota, "The Effect of Relative Hydrogen Concentration on Catalytic Reaction over Platinum under Low Gravity Condition," Combustion Science and Technology Vol. 164, pp. 175-191, 2001. 9 (SCI, IF 0.857). 49. Hiroshi ENOMOTO, Hyung-Man Kim a, Michikata KONO and Toshikazu KADOTA, "The Effect of Ambient Pressure on Catalytic Reaction over Platinum," JSME Int. Journal Series B Vol. 43 No. 3, pp. 491-496, 2000. 8 (SCI, IF 0.199, 1 citation). 50. Hyung-Man Kim a*, H. Enomoto, H. Kato, M. Tsue and M. Kono, "The Effects of Catalytic Reaction on Hot Surface Ignition," JSME Int. Journal Series B Vol. 41 No. 4, pp. 945-950, 1998. 10 (SCI, IF 0.199). 51. Hyung-Man Kim a*, H. Enomoto, H. Kato, M. Tsue and M. Kono, "A Study of the Ignition Mechanism of Methane-Air Mixtures by Inert and Catalytic Hot Surfaces," Combustion Science and Technology Vol. 128, pp. 197-213, 1997. 12 (SCI, IF 0.857, 3 citations). 52. H. Enomoto, Hyung-Man Kim a, H. Kato, M. Tsue and M. Kono, Pressure Effects on Hydrogen- Oxygen Reaction over Pt Catalytic Surface, Journal of the Japan Ins. of Energy Vol. 75 No. 11, 1996. 11. 53. H. Enomoto, Hyung-Man Kim a, H. Kato, M. Tsue and M. Kono, A Study of Surface Reaction of H2- O2 with Platinum Catalyst," Journal of the Japan Ins. of Energy Vol. 74 No. 12, 1995. 12. 54. H. Nagata, Hyung-Man Kim a, J. Sato and M. Kono, "An Experimental and Numerical Investigation on the Hot Surface Ignition of Premixed Gases under Microgravity Conditions," The 25 th International Symposium on Combustion, pp. 1719-1725, 1994. 12 (SCI, IF 3.633, 4 citations). 55. Hyung-Man Kim b*, S. R. Lee and S. H. Chung, "Numerical Study on the Structure of Hydrogen Premixed Flames," Korean Soc. of Mechanical Engineers Conference, 1992. 4. 28. 56. Hyung-Man Kim b*, S. R. Lee and S. H. Chung, "Numerical Study on the Structure and Extinction of Stretched Lean H2/Air Premixed Flames," The 6 th International Symposium on Transport Phenomena in Thermal Engineering, 1992. 5. 9. Patents Korea Patent Registration, Proton Exchange Membrane Fuel Cell with Pin-type Flow Channel, No. 10-1074493, 2011. 10. 28. Korea Patent Registration, Fuel Cell Intake temperature and humidity controller and method, 2011. 10. 5, No. 10-1072486.

Korea Patent Registration, Vehicle Battery Saver System, 2011. 1. 12, No. 10-1009477. Worldwide PCT and Korea Patent Application, Bipolar Plate for Fuel Cell with Sub-channel, No. PCT/KR2010/005533 and No. 10-2010-0006602, 2010. 8. 20. Korea Patent Application, Ultrasonic Humidifier for Fuel Cell, No. 10-2011-0077036, 2011. 8. 2. Research-related Awards Inje University, The first publication in Nature, 2011. 10. 13. Korean Society of Electrochemistry, Academic award for the fuel cell research achievement, 2010. 12. 7. Registration as energy scientist in Marquis Who s Who in the World, 28 th Edition, 2010. 4. 7. Inje University, Academic year award certificate of excellent research achievement, 2004. 9. 15. Journal Editing Experiences Korean Society of Automotive Engineers, Editor Member 2000.1.11-present. Korean Combustion Society, Editor Member, 2004.1.11-2005.12. International Journal of Hydrogen Energy, Reviewer, 2006-present. Heat and Mass Transfer, Reviewer, 2010-present. International Journal of Thermal Science, Reviewer, 2011-present. Combustion Science and Technology, Reviewer, 2011-present. < Research Projects in the last 5 years > Research Projects as Principal Investigator 1 Korea Institute of Energy Technology Evaluation and Planning, New and Renewable Energy Research, Development of an IPMC Electric Energy Harvesting Device for Stand-alone Marine Plant, 2012.11-2015.10 (3 years), 1,600,000,000 KRW. 2 National Leading Research foundation of Korea, National Research Laboratory, Development of Regenerative PEM Fuel Cell and Integrated Control System, 2009.5-2014.2 (Success in 1 st step 3 years, in progress of 2 nd step), 1,375,340,000 KRW. 3 Ministry of Knowledge Economy, Leading Industry Development for Economic Region, Development of Inexpensive Fuel Processing System for FCEV, 2009.10-2012.4 (3 years), 90,000,000 KRW. 4 Ministry of Knowledge Economy, Leading Industry Development for Economic Region, Green Car Training Project, 2009.10-2012.4 (3 years), 240,000,000 KRW. 5 Next Generation Vehicle Technology, Hyundai Motor Company R&D, Development of PEMFC stack

analysis apply unit cell equivalence analysis model, 2009.12-2010.6 (6 months), 30,000,000 KRW. 6 Ministry of Knowledge Economy, DAEDEOK INNOPOLIS, Multi-functional Bicycle Suspension Fork, 2009.8-2010.8 (1 year), 47,600,000 KRW. 7 Gyeongnam Techno-park, Development project of Technology infrastructure, Design and Develop a test manufactures of High Efficiency Auxiliary heater, 2009.1-2009.6 (6 months), 50,000,000 KRW. 8 KORENS, New University for Regional Innovation - High-tech Machine, Engine Power System Test Research of EGR Cooler in a Diesel Engine, 2008.9-2009.4 (8 months), 14,000,000 KRW. 9 Small and Medium Business Administration, Technology development project of Communal arithmetic, Technology Development of Auxiliary heater using the engine remaining heat, 2008.7-2009.4 (10 months), 41,400,000 KRW. 10 Ministry of Knowledge Economy, Local expert Training Project, Technology Development of High Efficiency EGR Cooler in a Diesel Engine, 2006.5-2009.4 (3 years), 390,000,000 KRW. 11 KAIST, Support project of Korea science academy R&E program, Research of Hydrogen Production for PEM Fuel Cell system inverse operation, 2006.3-2009.2 (3 years), 66,000,000 KRW. 12 Ministry of Knowledge Economy, Technology development project of local industrial, Development of smart washing machine vibration control variable damper, 2007.5-2008.4 (1 year), 38,000,000 KRW. Media Coverage of the Research Achievements

Newspaper Reports for the Paper Publication in Nature 10 Newspaper Reports for Improving the Power of Fuel Cell by approximate 23% in National Leading Research Laboratory supported by National Research Foundation of Korea I clarify my hopes of energy research achievement and Novel prize in the monthly magazine of New and Renewable Energy