Everything is possible Training courses Large domestic boilers Light commercial boilers New energy solutions
Training at Keston Heating Here at Keston we understand that having the confidence to be able to specify and install a wide range of products is an essential part of your day-to-day job. With this in mind, we have created a wide range of comprehensive training courses, utilising both classroom and hands-on learning techniques to enable you to become a more efficient, skilled heating engineer. All of our training courses have been designed to ensure that you get the most out of the time spent off the road and can be easily adapted to suit the desired knowledge level. So, if you re looking to refresh your existing knowledge, or to learn how to install something completely new, Keston Heating has a course for you. Everything is possible with Keston. 2
Training locations Everything is possible Training courses are available at the following locations: Hull High efficiency boiler training 1 day per range Commercial boiler training 1 day per range Renewables appreciation training 1 day BPEC Solar Thermal 3 days BPEC Solar Photovoltaics 3 days BPEC Air Source & Ground Source heat pumps 2 days Reading High efficiency boiler training 1 day per range Commercial boiler training 1 day per range Renewables appreciation training 1 day BPEC Solar Thermal 3 days BPEC Solar Photovoltaics 3 days BPEC Air Source & Ground Source heat pumps 2 days 3
Domestic boilers High Efficiency Boiler Training Courses 1 day Courses are available on the following products: C range of boilers 30C, C36 & C45 Q range of boilers Q28s, Q28h & Q37H These comprehensive one day courses can be mixed and matched for individual installation and servicing companies. The course uses a simple step-by-step approach with hands-on training to ensure all aspects of commissioning, servicing, and fault finding can be dealt with quickly and efficiently. Each course covers the following: Product range overview Product specification Application and installation of products Electronic circuits and components Flue and accessory options Component overview, change and repair User controls Sequence of operation Fault finding Commissioning The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion. Price 50.00 (incl VAT) per person 4
Everything is possible 5
Light commercial boilers Light Commercial Boiler Training Courses 1 day Courses are available on the following products: C55, C90 & C110 & modular rigs These comprehensive one-day courses can be mixed and matched for individual installation and servicing companies. The course uses a simple step-by-step approach with hands-on training to ensure all aspects of commissioning, servicing, and fault finding can be dealt with quickly and efficiently. Each course covers the following: Product range overview Product specification Application and installation of products Electronic circuits and components Flue and accessory options Component overview, change and repair User controls Sequence of operation Fault finding Commissioning The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion. Price 50.00 (incl VAT) per person 6
Everything is possible 7
New energy solutions New Energy Appreciation Courses 1 day One day basic courses on Solar Thermal, Solar Photovoltaics, Air Source and Ground Source heat pump systems; perfect if you re interested in moving into new energy solutions, but don t know where to start. These introductory courses provide a brief overview of the technologies and a chance to ask all of those burning questions. Courses are available on the following: Solar Thermal systems Solar Photovoltaics Air Source heat pumps Ground Source heat pumps Each course covers the following: Introduction to new energy solutions Different installation designs Practical session (for solar, this takes place on a purpose-built roof) Setting up and installing different controls Identifying parts These courses involve one-to-one discussions with tutors, demonstrations and practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion. Price 100.00 (incl VAT) per person 8
Everything is possible BPEC Solar Thermal Training Course 3 day An in-depth three day solar BPEC training course, leading to full solar accreditation upon completion. This course is recognised by all Microgeneration Certification Schemes (MCS). The course utilises a mixture of classroom and hands-on based learning, with a proportion of the course spent working on a low level, purpose-built roof. The course is concluded with an examination at the end of day three. Successful completion of the training and assessment will provide training evidence for individuals to include within their applications for MCS accreditation. The course covers the following: Introduction to solar thermal systems System sizing Installing solar Installing and setting up solar controllers Commissioning service Maintenance and servicing Concluding examination Lunch and refreshments are provided during the course. Price 495.00* (incl VAT) per person BPEC Solar Photovoltaics Training Course 3 day This practical and in-depth three day Solar Photovoltaics BPEC training course is designed for heating engineers and electricians alike. Utilising both classroom and hands-on based learning through the use of a purpose-built low-level roof, this course is an essential for all modern installers interested in new energy solutions. Upon completion of the course, full accreditation will be awarded. This course is recognised by all Microgeneration Certification Schemes (MCS). Successful completion of the training and assessment will provide training evidence for individuals to include within their applications for MCS accreditation. The course covers the following: Introduction to Solar Photovoltaics System sizing Installing Solar Photovoltaics Setting up Solar Photovoltaics controllers Commissioning Maintenance and servicing Concluding examination Lunch and refreshments are provided during the course. Price 495.00* (incl VAT) per person *Price includes 65.00 BPEC registration fee. 9
BPEC Air Source & Ground Source Heat Pump Training Course 2 day An in-depth two day BPEC Air Source and Ground Source heat pump training course designed for the practical new energy engineer. Upon completion of the course, full accreditation will be awarded. This course is recognised by all Microgeneration Certification Schemes (MCS). The course utilises a mixture of classroom and hands-on based learning, with a proportion of the course being spent working on live products. Successful completion of the training and assessment will provide training evidence for individuals to include within their applications for MCS accreditation. The course covers the following: Introduction to heat pump systems System sizing Installing heat pumps Installing and setting up heat pump controllers Commissioning Maintenance and servicing Concluding examination Lunch and refreshments are provided during the course. Price 495.00* (incl VAT) per person *Price includes 65.00 BPEC registration fee. Booking a course Once you have decided which training course is right for you, simply complete the following registration form and post back to the Ideal heating training department. We will then contact you to discuss suitable dates and payment for the course you wish to attend. Alternatively, you can book online by visiting www.keston.co.uk/training or call 01482 498 432 10
Application form Everything is possible Company details Please print your details as you wish for them to appear on your certificate of attendance. Name: Company: Address: Postcode: Telephone: Mobile: Email: Course venue (please tick one box) Hull Ideal Heating Group Head Office, National Avenue, Kingston Upon Hull HU5 4JN Reading Ideal Heating Group Centre of Excellence, Unit 630, Wharfedale Road, Winnersh, Wokingham RG41 5TP Delegate information 1. Name: 2. Name: 3. Name: 4. Name: 5. Name: 6. Name: Training courses (please tick the course you wish to attend) Domestic boilers 1 day product appreciation courses C range of boilers 30C, C36 & C45 50.00 (inc VAT) per person Q range of boilers Q28s, Q28h & Q37H 50.00 (inc VAT) per person Light commercial boilers 1 day product appreciation courses C55, C90 & C110 & modular rigs 50.00 (inc VAT) per person New energy solutions 1 day appreciation courses Solar Thermal systems 100.00 (inc VAT) per person Solar Photovoltaics 100.00 (inc VAT) per person Air Source heat pumps 100.00 (inc VAT) per person Ground Source heat pumps 100.00 (inc VAT) per person BPEC courses 3 day BPEC Solar Thermal training course 495.00 (inc VAT) per person 3 day BPEC Solar Photovoltaics training course 495.00 (inc VAT) per person 2 day BPEC Air Source & Ground Source heat pump training course 495.00 (inc VAT) per person Please post your completed application form to: Training Department Keston Heating PO Box 103 National Avenue Kingston Upon Hull HU5 4JN
Keston Heating PO Box 103 National Avenue Kingston Upon Hull HU5 4JN Tel 01482 443 005 Fax 01482 467 133 www.keston.co.uk In accordance with our policy of constant improvement we reserve the right to alter the design and specification of products without prior notice. Keston business reg : no 03544589 052011 -V1