Multi-contact Compact Circular Connectors RM Series Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Rated current Rated voltage [RM5] 0 ( and 4 contacts) 5 (8, 0, and contacts) [RM, ] 5 [RM] C 600V, DC 840V ( contacts) C 500V, DC 700V ( and 4 contacts) C 50V, DC 40V (5, 6 and 7 contacts) [RM5] C 600V, DC 840V ( contacts) C 500V, DC 700V (4 and 8 contacts) C 50V, DC 40V (0 and contacts) [RM] C 500V, DC 700V (5 contacts) C 50V, DC 40V (0 contacts) Items Specifi cations Conditions. Contact. Insulation. Withstanding voltage [RM, ] 4mø max. [RM5] 4mø max. (8, 0, and contacts) [RM5] mø max. ( and 4 contacts),000mø min. No fl ashover or dielectric breakdown. Features. Wide variations The RM Series provides a wide selection of plug and receptacle types to satisfy various kinds of application requirements. vailable position counts :,, 4, 5, 6, 7, 8, 0,, 5, and 0. vailable lock mechanisms : threaded coupling type, bayonet sleeve type, and quick detachable type. Measured at DC Measured at DC 500V Operating temperature range Storage temperature range -5 to +85ç -0 to +60ç [RM] C,800V for one minute ( contacts) C,500V for one minute ( and 4 contacts) C,000V for one minute (5, 6 and 7 contacts) [RM5] C,800V for one minute ( contacts) C,500V for one minute (4 and 8 contacts) C,000V for one minute (0 and contacts) [RM] C,500V for one minute (5 contacts) C,000V for one minute (0 contacts) 4. Vibration No electrical discontinuity for 0µs. or greater 0 to 55 Hz/cycle, full amplitude : 0.75mm, axis directions, hours each 5. Shock No electrical discontinuity for 0µs. or greater 6. Mating cycles Contact : 8mø max.,000 times 7. Temperature cycle 8. Moisture Insulation : 00Mø min. Insulation : 00Mø min. (when dry) cceleration : 40m/s, duration : ms axis directions, times each -55 C : 0 minutes Normal temperature : 0 to 5 minutes 85 C : 0 minutes Normal temperature : 0 to 5 minutes, left for 5 cycles Temperature : 40 C, relative humidity : 0 to 5%, left for 6 hours 06.e
RM Series Multi-contact Compact Circular Connectors Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Plug RM 5 T P - S (0) q w e r t y u i qmodel name : RM Series (Round Miniature Series) Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. wshell size : The shell size refers to the outer shell diameter of the mating interface of the plug. elock mechanism T : Threaded coupling type B : Bayonet sleeve type Q : Quick detachable type rconnector type () P : Plug J : Jack P-C : Plug cap R-F : Square fl ange for receptacle () R : Receptacle R-C : Receptacle cap R-B : Cord bushing tform variation class : Indicates a variation or change within the series. ynumber of contacts ucontact form P : Male contact S : Female contact iother specifi cations : two-digit number is added to indicate other specifi cations. Materials / Finish Items Material Finish Remarks Plated shell Insulator Brass, zinc alloy luminum alloy Diallyl phthalate resin Polycarbonate resin Nickel plating Chromium plating ---------------------- ---------------------- UL4V-0 (Black) Contact Brass or copper alloy Silver plating ---------------------- Please note that materials will differ depending on the actual part number.
RM Series Multi-contact Compact Circular Connectors RMB connectors (bayonet sleeve type) Plug 4 Ø8 Ø. Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø8 Cable clamp range: 5mm min. to 8mm max. RMBPE-S(7) 0-04-0 7 RMBPE-S(7) 0-044- 7 RMBPE-4S(7) 0-045-5 7 4 RMBPE-5S(7) 0-046-8 7 5 RMBPE-7S(7) 0-048- 7 7 Receptacle (Jam nut to be fastened) 6 RMBPE-PH(7) 0-047-7 7 RMBPE-PH(7) 0-048-0 7 RMBPE-4PH(7) 0-04- 7 4 RMBPE-5PH(7) 0-040- 7 5 RMBPE-6PH(7) 0-04-4 7 6 RMBPE-7PH(7) 0-04-7 7 7 7(HEX) 6..5 7 Ø4. Ø7.6 M4 0.75 RMBRD-PH(7) 0-08-8 7 RMBRD-PH(7) 0-084-0 7 RMBRD-4PH(7) 0-085- 7 4 RMBRD-5PH(7) 0-086-6 7 5 0.5 RMBRD-6PH(7) 0-087- 7 6 RMBRD-7PH(7) 0-088- 7 7 Remarks : See page for details on recommended panel cut-out. RMBRD-S(7) 0-060-8 7 RMBRD-S(7) 0-060-7 7 RMBRD-4S(7) 0-06-0 7 4.6 RMBRD-5S(7) 0-06- 7 5 RMBRD-7S(7) 0-06- 7 7
RM Series Multi-contact Compact Circular Connectors Receptacle (Integral, square flange) 6 4 - Ø..5 4.5 Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. 6 Ø4. Ø4. RMBRB-S 0-0577- RMBRB-S 0-0578-6 RMBRB-4S 0-057- 4 RMBRB-5S 0-0580-8 5 RMBRB-7S 0-065-0 7.6 RMBRB-PH 0-087-5 RMBRB-PH 0-088-8 RMBRB-4PH 0-08-0 4 RMBRB-5PH 0-080-0 5 RMBRB-6PH 0-08- 6 RMBRB-7PH 0-08-5 7 6 Ø 4. Remarks :. See page for details on recommended panel cut-out.. Please note that the RMBRB differs in mounting dimensions from the RMBR-F. Jack 7 40 maximum of 0.6mm Ø8 0.5 Cable clamp range: 5mm min. to 8mm max. RMBJB-S(07) 0-068-6 07 RMBJB-S(07) 0-06- 07 RMBJB-4S(07) 0-0640-8 07 4 RMBJB-5S(07) 0-064-0 07 5 RMBJB-7S(07) 0-064-6 07 7 RMBJB-PH 0-08-4 RMBJB-PH 0-080- RMBJB-4PH 0-08-6 4 RMBJB-5PH 0-08- 5 RMBJB-6PH 0-08- 6 RMBJB-7PH 0-084-4 7 4
6.5 Ø Ø 5. Ø.5 Cable clamp range: 5mm min. to 8mm max. RM Series Multi-contact Compact Circular Connectors RM5Q connectors (quick detachable type) Plug Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. RM5QPS-S(7) 0-08-8 7 RM5QPS-8S(7) 0-085-6 7 8 RM5QPS-0S(7) 0-085- 7 0 RM5QPS-S(7) 0-08- 7 Receptacle (Jam nut to be fastened) 4. (HEX) 7.6 RM5QPS-P(7) 0-086- 7 RM5QPS-4P(7) 0-087-4 7 4 RM5QPS-8PH(7) 0-0850-0 7 8 RM5QPS-0PH(7) 0-085- 7 0 RM5QPS-PH(7) 0-080-6 7 6.5 M7 0.75.5 0.5 7 Ø7.4 Ø0 RM5QRD-P(7) 0-0880- 7 RM5QRD-4P(7) 0-088-4 7 4.0 RM5QRD-8PH(7) 0-0854- 7 8 RM5QRD-0PH(7) 0-0855-4 7 0 0.6 RM5QRD-PH(7) 0-08- 7 Remarks : See page for details on recommended panel cut-out. RM5QRD-S(7) 0-084-0 7.7 RM5QRD-8S(7) 0-0864-5 7 8 RM5QRD-0S(7) 0-077-8 7 0.6 RM5QRD-S(7) 0-08-4 7 5
ØC RM Series Multi-contact Compact Circular Connectors RM [ ] T connectors (threaded coupling type) Plug L ØD Ø Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. (Maximum cord diameter) B Ø B ØC ØD L RM5TP-S(7) 0-0845-0 7 RM5TP-P(7) 0-088-7 7 RM5TP-4P(7) 0-08-0 7 4 RM5TP-8S(7) 0-005- 7 5. M.5.5 4 8 RM5TP-8PH(7) 0-0856-7 7 RM5TP-0S(7) 0-0055-8 7 RM5TP-0PH(7) 0-0857-0 7 0 RMTP-5P(7) 0-0-5 7 5 RMTP-0P(7) 0-04-8 7 0 TM5 5 8 7 Remarks : TM5x represents 0 trapezoidal thread profi le. Receptacle (Jam nut to be fastened) 4. HEX 7.6 M7 0.75.5 6.5 7 M 0.5 Ø0 RM5TRH-P(7) 0-0886-8 7 RM5TRH-S(7) 0-0847-6 7.7 RM5TRH-4P(7) 0-0887-0 7 4 RM5TRH-8PH(7) 0-0858- 7 0.6 8 RM5TRH-8S(7) 0-0868-6 7.6 RM5TRH-0PH(7) 0-085-5 7 0.6 0 RM5TRH-0S(7) 0-086- 7.6 Remarks : See page for details on recommended panel cut-out. 6
RM Series Multi-contact Compact Circular Connectors Receptacle (Jam nut to be fastened) D 6.5 6.5 B C Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø B C D RMTR-5P(7) 0-05-0 7 5 RMTR-0P(7) 0-06- 7 0 7 TM5 M 0.75.5 Remarks :. TM5x represents 0 trapezoidal thread profi le.. See page for details on recommended panel cut-out. 7
TM0 50 0 Ø Ø5 Ø.8 Ø 4 TM0 TM0 4. 6 0 HEX Ø.8 RM Series Multi-contact Compact Circular Connectors RM5T (type D) connectors Plug (solder type) Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. RM5TPD-0P(7) 0-060-6 7 RM5TPD-0S(7) 0-0686- 7 0 RM5TPD-P(7) 0-0660-5 7 RM5TPD-S(7) 0-066-8 7 Jack (solder type) RM5TJD-0P(7) 0-0706-4 7 RM5TJD-0S(7) 0-060- 7 0 RM5TJD-P(7) 0-075-5 7 RM5TJD-S(7) 0-0665- 7 Receptacle (solder type) 7.6 M7 0.75 RM5TRD-0P(7) 0-0687- 7 0.5 0 RM5TRD-0S(7) 0-060- 7. RM5TRD-P(7) 0-066-0 7 0.5 RM5TRD-S(7) 0-066- 7. Remarks : See page for details on recommended panel cut-out. 8
RM Series Multi-contact Compact Circular Connectors Plug (crimp type) TM0 B Ø Ø5 ØC Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. B ØC RM5TPD-0PC(7) 0-0677-8 7 50 0.8 0 RM5TPN-0PC(7) 0-07-7 7 40 5 8 Receptacle (crimp type) RM5TRD-0SC(7) 0-0676-5 7 0 Remarks : See page for details on recommended panel cut-out. Receptacle (dip type).5 6 M7 0.75 TM0 HEX.5 6 TM0 HEX Mating guide B Dip post diameter Ø0.8 B RM5TRD-0SB(7) 0-070- 7 0. 8. Remarks : See page for details on recommended panel cut-out. M7 0.75 Dip post arrangement dimensions when viewed from the mating end 4 4.5.5 4 4 Mating guide position
RM Series Multi-contact Compact Circular Connectors RM Series accessories Cap Plug cap 00 Ø6. Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Part No. HRS No. Ø B C D RM5TP-C(7) 0-007-6 7.5 MX 6.5 RMTP-C(7) 0-05-6 7 8 TM5X 7.5 Receptacle cap Ø6 Ø. Part No. HRS No. Ø B C D RM5TR-C(7) 0-0080-5 7.5 MX.5 RMTR-C(7) 0-054- 7 8 TM5X 8.5 Square flange Ø 00 Part No. HRS No. Ø B C D RMBR-F(7) 0-054-0 7 4. 6 8 6 RM5TR-F(7) 0-0-8 7 7. 7.6 0.6 8 Ø Ø Cord bushing Ø0.7 Ø6.4 Ø8 Part No. HRS No. Remarks RMBPG-B(7) 0-0776-0 7 ----------- 0
RM Series Multi-contact Compact Circular Connectors Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved..4 Contact Male contact 6.7 Female contact Type Part No. HRS No. B C pplicable wire size Loose piece RM-PC- 0-0668-7 00.6.0 0 to 4 WG contacts RM-PC- 0-067-4 00.45.5 4 to 8 WG Reel RM-PC- 0-0670- 00.6.0 0 to 4 WG contacts RM-PC- 0-0674-0 00.45.5 4 to 8 WG - Type Part No. HRS No. B C pplicable wire size Loose piece RM-SC- 0-066-0 00.6.0 0 to 4 WG contacts RM-SC- 0-067-7 00.45.5 4 to 8 WG 7 Reel RM-SC- 0-067- 00.6.0 0 to 4 WG contacts RM-SC- 0-0675- 00.45.5 4 to 8 WG Note : Loose piece contacts are available in 00 pcs/pack. Reel contacts are available in 8,000 pcs/reel..4 pplicable tools - Type Items Part No. HRS No. pplicable contact pplicable wire size RM-PC- HT80/RM- 50-040-6 00 0 to 4 WG Manual crimping RM-SC- Manual tool RM-PC- HT80/RM- 50-040- 00 4 to 8 WG RM-SC- utomatic crimping CM-05C 0-000-0 00 ---------------------- ---------------------- press RM-PC- utomatic P-05-RM- 0-07-4 00 0 to 4 WG RM-SC- pplicator RM-PC- P-05-RM- 0-08-7 00 4 to 8 WG RM-SC- Extraction tool RM-TP 50-0008-7 00 ---------------------- ---------------------- Manual crimping tool Contact extraction tool utomatic crimping press (Type CM-05C) How to use the RM5Q connectors (quick detachable type). Insertion.Extraction For smooth mating, while holding the plug tube, match the guide of the receptacle with the key-way on the plug and push straight it in as shown in the above fi gure. To unmate, hold the locking sleeve and twist it approximately 0 degrees to the left, then pull it straight off as shown in the above figure.
Powered by TCPDF (www.tcpdf.org) RM Series Multi-contact Compact Circular Connectors Receptacle-recommended panel cut-out For jam nut type Recommended panel cut-out for shell sizes and 5 Recommended panel cut-out for shell sizes.6 For square flange type Ø Ø 4 Ø Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Remarks : Use a 0.5 ~ mm thickness panel for all shell sizes. Mounting method Nut tightening Square fl ange Sign 5 BRD QRD TRH TRD TR BRB Ø 4. 7.. 4.5 B 6. 7.6 ---------------------- ---------------------- C ---------------------- ---------------------- ----------------------.65 ---------------------- D ---------------------- ---------------------- ---------------------- ----------------------.6 ØE ---------------------- ---------------------- ---------------------- ----------------------. Remarks : The dimensional tolerance to be +0. / 0. Shell size Locking mechanism Contact Position rrangement and Specifications Shell size : Shell size : 5 Contact arrangement 4 5 4 Ø 6 5 7 4 No. of contacts 4 5 7 4 Withstanding voltage C,800V for one minute C,500V for one minute C,000V for one minute C,800V for C,500V for one minute one minute Rated current 5 0 Insulation,000Mø min.,000mø min. Contact 4mø max. mø max. Inner diameter of solder pot Ø.mm Ø.7mm Contact arrangement 8 7 6 0 5 4 Shell size : 5 Shell size : 0 5 8 4 4 7 6 5 0 7 8 8 6 7 0 5 4 6 4 5 0 5 8 4 4 7 6 5 0 7 8 8 6 7 0 5 4 6 4 5 No. of contacts 8 0 5 0 Withstanding voltage C,500V for one minute C,000V for one minute C,500V for C,000V for one minute one minute Rated current 5 5 Insulation,000Mø min.,000mø min. Contact 4mø max. 4mø max. Inner diameter of solder pot Ø.mm Ø.mm Remarks. The above figures show contact arrangements viewed from the mating end of the connectors with female contacts.. The " " marks shown in the above figures represent the position of the receptacle mating guide.. Withstanding voltages are shown as test voltages. Usage Recommendations. Be sure the power is off before mating/unmating a connector.. Be sure to use a connector with female contacts for the power side of the circuit.. Be sure to engage the lock mechanism on the connectors. 4. Regarding plugs and jacks : the forces from cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is suitable for use with these connectors before usage and production. 4-6-,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 4-8540,JPN TEL: +8-45-60-56 Fax: +8-45-5-76 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 0/06. Contents are subject to change without notice for the purpose of improvements.