Place & Connect Pumping Stations

Similar documents
Available In Stainless Steel Epoxy Coated Steel Fiberglass

EVH-602. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)

The exterior skin of the enclosure shall be manufactured from thick H32 aluminum which has been powder coated with polyester powder.

Outdoor + Switchgear, Walk-in Equipment Buildings Low & Medium Voltage NEMA 3R

VAVH-5. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)

EHH-401. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)

EVH-501. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)

EVH6. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)

EVH-501. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)

AFA-801. Acoustical Louver Airfoil Blade. Application and Design. Standard Construction. Options (at additional cost)

Packaged Systems Building Specification

EHH-501. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)

Fiberglass Cooling Towers

EHV-901. Wind-Driven Rain Louver Dual Module. Application and Design. Standard Construction. Options (at additional cost)

AFJ-601. Acoustical Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)

This Shelter Works enclosure survived Hurricane Rita in Sulphur, LA. Call for a free needs assessment and quote today

LOG COLLEGE MIDDLE SCHOOL

13340 FIBERGLASS REINFORCED PLASTIC (FRP) ENCLOSURE

EHH-201. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)

DIVISION 13 SPECIAL CONSTRUCTION SECTION PRE-ASSEMBLED CONTROL BUILDING WITHOUT FLOOR

EHH-401. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)

FSJ-402. Fabricated Steel Stationary Louver J Blade. Application and Design

EVH-660D. Miami-Dade Qualified Wind-Driven Rain Louver. Application and Design. Standard Construction. Options (at additional cost)

DIVISION 13 SPECIAL CONSTRUCTION SECTION PRE-ASSEMBLED CONTROL BUILDING WITH FLOOR

ESU-130S. Thin-line Louver Frameless. Application and Design. Standard Construction. Options (at additional cost)

EVH-660D. Miami-Dade Qualified Wind-Driven Rain Louver. Application and Design. Standard Construction. Options (at additional cost)

ESF-145. Thin-line Louver Flat Blade. Application and Design. Standard Construction. Options (at additional cost)

NRM-7000 Guide Specifications

SECTION FIBERGLASS REINFORCED PLASTIC (FRP) ENCLOSURE

FSJ-602. Fabricated Steel Stationary Louver J Blade. Application and Design

FSJ-402. Fabricated Steel Stationary Louver J Blade. Application and Design

Pritchard Brown Sound Attenuating, Weatherproof Genset Enclosure Specification No 2130

EAH-690. Adjustable Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)

A. Provide and install a factory made, wood framed, storage building. B. Building Construction Type: IBC Type V-B Wood Frame.

ESJ-401. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)

ESU-154S. Thinline Louver Frameless. Application and Design. Standard Construction. Options (at additional cost)

VASJ-6. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)

CS-100 Guide Specifications

EDJ-401. Stationary Louver J Blade. Application and Design

SECTION METAL ROOF & WALL PANELS

GENERAL SPECIFICATION FOR FIRE RATED APPLICATIONS

ESU-150. Thin-line Louver Thin-line Blade. Application and Design. Standard Construction. Options (at additional cost)

Covering Design Regions

FAD-402. Fabricated Steel Adjustable Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)

ESJ-202. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)

EHH-601D. Miami-Dade Qualified Wind-Driven Rain Louver

ESU-130. Thin-line Louver Thin-line Blade. Application and Design. Standard Construction. Options (at additional cost)

EDJ-202. Stationary Louver J Blade. Application and Design

EAD-601. Adjustable Louver Drainable Blades. Application and Design. Standard Construction. Options (at additional cost)

SECTION METAL ROOF AND SOFFIT PANELS

ESID-430. Intake/Discharge Specialty Louver Stationary Blades. Application and Design

EDK-402. Stationary Louver K Blade. Application and Design. Standard Construction. Options (at additional cost)

EACC-601. Combination Louver/Damper Concealed Actuator. Application and Design. Standard Construction

Metl-Span Warranty Program

ESD-435. Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)

FDS-602. Fabricated Steel Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)

VAAD-6. Adjustable Louver Drainable Blades. Application and Design

TABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS

VP ROOF SYSTEMS SSR ROOF SYSTEM. WEATHERTIGHT PERFORMANCE FOR low-slope ROOF APPLICATIONS

EAC-401. Combination Louver/Damper Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)

Call for any further details including but not limited to material, temper, thickness, paint and design.

FreezeFree TM Automated Anti-Icing System GENERAL SPECIFICATIONS

Addendum #4 NEW LOW HEAD OXYGEN SYSTEM Contractor EXHIBIT T SPECIAL PROVISIONS SECTION METAL SHADE STRUCTURE

EAD-635. Adjustable Louver Drainable Blades. Application and Design. Standard Construction. Options (at additional cost)

MoffittVent. Large Natural Ventilator. MoffittCorp.com (800) th Ave S. Suite 130 Jacksonville Beach, FL 32250

VACC-4. Combination Louver/Damper Drainable Blade. Application and Design

EAD-401. Adjustable Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)

ESJ-401RM. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)

6. ENGINEERING SYSTEMS REQUIREMENTS B30 ROOFING B30 GENERAL SYSTEM DESCRIPTION

6. ENGINEERING SYSTEMS REQUIREMENTS B30 ROOFING B30 GENERAL SYSTEM DESCRIPTION

ESD-635. Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)

a division of NCI Standing Seam Roof Systems

CONTINUOUS VENTILATORS

SECTION PRE-ENGINEERED WOOD POST FRAME BUILDING SYSTEM. B. Products Supplied But Not Installed Under This Section:

City of High Point Airport Overlay District Noise Level Reduction Design Standards

EACA-601. Combination Louver/Damper Airfoil Blade. Application and Design. Standard Construction

EAC-601. Combination Louver/Damper Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)

Section X - Miscellaneous

ESU-153. Thinline Louver Thinline Blade. Application and Design. Standard Construction. Options (at additional cost)

ESU-154. Thinline Louver Thinline Blade. Application and Design. Standard Construction. Options (at additional cost)

603 Summit Avenue, Suite 102 Greensboro, N.C Voice/FAX (336)

EHM-601. Hidden Mullion Louver Dual Drainable Blade. Application and Design

Section 32 - Miscellaneous

Specifications for RM Products Ltd. Pre-Assembled & Unassembled Fiberglass Buildings

B. Provide equipment complying with this specification and manufactured by one of the following:

SAM HOUSTON STATE UNIVERSITY DIVISION 07 THERMAL & MOISTURE PROTECTION SECTION ROOFING SYSTEMS DESIGN AND CONSTRUCTION STANDARDS February 2016

Section BUILDINGS, SHELTERS, ENCLOSURES

WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947

PRE-ENGINEERED METAL BUILDING SYSTEM

PAINT BOOTHS LARGE EQUIPMENT

ESU-154. Thinline Louver Thinline Blade. Application and Design. Standard Construction. Options (at additional cost)

Update In Progress. Division 7 Thermal and Moisture Protection Page Section ROOFING AND WATERPROOFING

SECTION ROOF ACCESSORIES

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.

EACA-601D. Miami-Dade Qualified Combination Louver

C. Jointing of Exterior Vertical Surfaces. Section D. The Secretary of the US Department of the Interior s Standards for Rehabilitation.

Operable / Fixed Skylight Milgard Aluminum Window

Pioneer Forced Draft Cooling Tower Specifications

SED-501. Sightproof Louver Drainable Blade. Application and Design

RPR Insul-Mate Sheet and Roll Jacketing

Transcription:

Place & Connect Pumping Stations Flo-Pak Integrated Municipal Pumping Systems www.pattersonpumps.com

When Quality Matters Flo-Pak Municipal Packaged Pumping Systems Setting the Bar for Packaged Systems Everywhere. Our prepackaged municipal pumping systems are engineered to provide municipalities a powerhouse of efficiency in water applications involving booster stations, raw water intakes and the filling of elevated tanks. Benefits of Packaged Systems. Our prepackaged municipal pumping systems offer the following benefits over stick-built construction: Reduced project completion time. Reduced overall construction cost. Single source of responsibility. Increased level of quality control. More comprehensive operator training. Customer input on manufacturers used for various components. Triplex above ground pump station. Our pre-packaged pump stations offer our customers peace of mind because they have a single point of contact for service and warranty claims. Our stations can be furnished in various configurations including open skid or complete pumping station including a factory assembled building, to meet precise space requirements and can be supplied for above ground as well as below ground installations. Installation of below ground pump station. Our system designs accommodate flows from 100 GPM to over 14,000 GPM and pressures exceeding 300 PSI.

Above Grade Steel Enclosures. Available roof styles include gabled, hipped, and single slope. Roofing materials can be 18, 24, or 26- gauge ribbed steel or plywood with architectural shingles. Kynar 500 baked on polyester resin finish on roof, ceiling, exterior and interior wall panels guaranteed against fading or chalking for 30 years. Optional gutters and down spouts. Galvanized steel roof purlins. Solid web roof trusses. 3-1/2-iin. R14 high density insulation with 1-in. thermal break consisting of 1-in. blanket insulation. 22-gauge steel liner panel with concealed fasteners or FRP laminated, 7/16-in. OSB plywood. 4-in. Steel framework consisting of 12, 14 & 16 gauge galvanized steel. Building load requirements are met prior to the installation of the roof and exterior panels. Optional slip resistant steel deck plate. Optional open skid design to allow concrete fill by installing contractor. Optional bridge crane for equipment removal.

Above Grade Steel Enclosures. Options For Exterior Finish 26 Gauge Steel Dryvit Stucco Kynar 500 Baked On Finish 30 Year Warranty Against Fading 40 Year Warranty Against Rust Optional Rain Canopy Optional Gutters & Down Spouts Choose From 12 Colors Optional Rain Canopy Optional Gutters & Down Spouts Wide Choice of Color Thin Set Brick Fullerton Castwall Choice of Brick Finish & Color Optional Rain Canopy Optional Gutters & Down Spouts 8 X 8 Split Face Block Appearance Optional Rain Canopy Optional Gutters & Down Spouts Choose From 12 Colors

Above Grade Fiberglass Clam Shell Enclosures Features 5 Db Noise Reduction R20 Insulation Value Corrosion Resistant Hardware Color Options Available Optional Lift Assist Ventilation Fan & Damper Included Lift Assist

Above Grade Fiberglass Enclosures 40 PSF design live roof load. Removable roof design. 120 MPH design wind load. Weather protected air intake louver. Stainless steel hardware. R20 Insulation value in walls and ceiling. Doors available on all four sides. 15 Mil polyester gel coat with UV inhibitor. 6 Dba reduction in noise level.

Controls Features: UL 508A & ETL Listed Variable or Constant Speed Optional Motor Control Center Construction Optional Flow Switch or Flow Meter Input Optional Suction Pressure Transmitter Input Optional Serial Communication Capability Built-in Ethernet Communication Optional Dry Contacts For Scada Flow (Optional), Total Discharge Pressure, Suction Pressure (Optional), Elapsed Time, number of starts, kw, and amps Displayed on Operator Interface. Custom PLC Programming Easily Web Enabled With Secure Firewall Pressure or level control Standard 6" Color Touch Screen Operator Interface (10 Optional) Enhanced diagnostic capability Alarm conditions and trouble shooting instructions appear on operator interface, thus eliminating the need for pilot lights. Optional Cellular Remote Monitoring System Motor Control Center Construction 6 Color Touch Screen

Patterson Pump Company A Gorman-Rupp Company 2129 Ayersville Road Toccoa, Georgia 30577 (706) 886-2101 www.pattersonpumps.com