Delivering Reliability A Designed to Protect and Improve Our Environment Environmental Products Sales & Service 888-9Oldcastle (888-965-3227)
A Environmentally Responsible COVER & FRAME Oldcastle Precast to the Rescue All of our products are produced in a controlled environment helping us maintain the high standards implemented by Oldcastle Precast. Many of our products are specifically designed to protect and improve the environment. We re always looking for new ways to minimize waste, increase recycling, improve energy management and use eco-friendly materials. FINISH:Hot Dip Galvanized after Fabrication. FRAME:Can be Fabricated for Cast-In Applications. LOADING:Designed for H20 loading for Non Roadway Applications. DOORS: Offered in Single, Double, or Triple Configurations, open 180 Degrees. EMBEDDED LIFTERS MATERIAL:Carbon Steel LOADING:Offered in 2, 4, 8, & 20 Ton 1 Ton Universal Lifters also available. Material and Design Loads The structural notes below are for standard models. We can design vaults to meet other specifications. 1. Concrete 5000psi (35 Mpa) @ 28 days. 2. Rebar ASTM A 615 grade 60 rebar. 3. Mesh Welded Wire Fabric ASTM A185 grade 65 4. Design Building Code Requirements for Reinforced Concrete (ACI 318-99) including all referenced standards and specifications. AASHTO Standard Specifications for Highway Bridges - 16th edition. 5. Loads Dead Load: Concrete - 150 PCF Earth Cover - 120 PCF Lateral Earth Pressure on walls: Equivalent Fluid pressure above water table + 39.6 PSF per foot of depth. Equivalent Fluid pressure below water table + 81.4 PSF per foot of depth. Surcharge on walls + 2 feet of earth cover Live Load: AASHTO HS20-44 32,000 lbs. rear axle loading GRADE RINGS / RISERS FINISH:Concrete with various Coatings/Textures. Designed to bring Covers up to Grade. Can be Rectangular or Round. Suitable for Off-Street Traffic. INLET PIPE Supplied by others SLUDGE WEIR Weight Varies by size FACET M-PAC Coalescing Media Shown with (3) rows We can provide drawings and calculations stamped by a Professional Engineer.
Environmental Vaults Sales & Service 888-965-3227 SINGLE GREASE INTERCEPT Can be Fabricated in a variety of Sizes. MANHOLE COVER & FRAME MATERIAL:Cast or Ductile Iron. DESIGNS:Custom Lettering & Design available. LOADING:Built to an H20 rating up to 150 KIP. SIZES: 24, 30, 32, 36 Round OIL WEIR Weight Varies by Size OUTLET PIPE Supplied by Others Size Varies by vault type OUTLET WEIR Weight Varies by size
Oil/Water Separator Vault Oil & Water Separator Vaults We offer a wide range of oil & water separator vaults to meet the specific application needs of our customers. From smaller capacity 35 GPM (gallon per minute) vaults, to larger capacity 800 GPM vaults and everything in between.
Sales & Service 888-965-3227 Grease Interceptor Vault Single Grease Interceptor Vault We offer grease interceptors that can be desinged and configured to meet a wide range of commercial applications as well as soecific performance criteria. LID SECTION ACCESS OPENING-Can be any size and location. INVERTED RING & COVER as well as STEEL or ALUMINUM HATCHES can also be cast in. DESIGNED FOR AASHTO HS-20 LOADING BASE SECTION SPECIAL ACCESSES, CASTOUTS, KNOCKOUTS, ETC. can be placed as specified. DESIGNED FOR AASHTO HS-20 LOADING DESIGNED ACCORDING TO ASTM C857-87 AND ASTM C858-83s. *Grease Interceptor vaults are available in a variety of standard and custom sizes to suit virtually any application.
Sand/Oil Interceptor Vault Sand & Oil interceptor Vault We offer a wide range of sand & oil interceptor vaults to meet the specific application needs of our customers. From smaller 320 gallon capacity vaults, to larger 11000 GPM capacity vaults and everything in between. LID SECTION ACCESS OPENING-Can be any size and location. INVERTED RING & COVER as well as STEEL or ALUMINUM HATCHES can also be cast in. DESIGNED FOR AASHTO HS-20 LOADING Retaining Baffle for Sand Interceptor BASE SECTION SPECIAL ACCESSES, CASTOUTS, KNOCKOUTS, ETC. can be placed as specified. DESIGNED FOR AASHTO HS-20 LOADING DESIGNED ACCORDING TO ASTM C857-87 AND ASTM C858-83s. *Sand & Oil vaults are available in a variety of standard and custom sizes to suit virtually any application.
Sales & Service 888-965-3227 Interceptor Vaults Standard Sizes for Interceptor Vaults We offer a wide range of standard sized interceptor vaults to meet the specific application needs of our customers. From smaller capacity 320 Gallon vaults, to larger capacity 11,000 Gallon vaults and everything in between. Elevation Plan STANDARD INTERCEPTOR VAULTS Gallon Capacity MODEL A B C D E F WEIGHT 320 463-SI 4-0 6-0 2-0 2-2 3-0 1-4 7,535 LBS 500 4113-SI 4-0 11-0 2-0 2-2 3-0 1-4 11,631 LBS 750 4114-SI 4-0 11-0 2-6 2-8 4-0 1-8 14,031 LBS 1000 41145-SI 4-0 11-0 3-3 3-5 4-6 2-2 16,231 LBS 1250 4115-SI 4-0 11-0 4-0 4-2 5-0 2-8 16,431 LBS 1500 4116-SI 4-0 11-0 5-0 5-2 6-0 3-4 18,831 LBS 1800 41165-SI 4-0 11-0 5-6 5-8 6-6 3-8 20,031 LBS 2000 4117-SI 4-0 11-0 6-0 6-2 7-0 4-0 21,231 LBS 2500 61266-SI 6-0 12-6 4-6 4-8 6-0 3-8 24,529 LBS 3000 61267-SI 6-0 12-6 5-6 5-8 7-0 2-6 27,454 LBS 3500 11125-SI 11-0 12-0 3-8 3-10 5-0 2-6 29,521 LBS 5000 11175-SI 11-0 17-0 3-8 3-10 5-0 2-8 37,702 LBS 5500 11176-SI 11-0 17-0 4-0 4-2 5-9 2-8 40,964 LBS 6000 11195-SI 11-0 19-0 4-0 4-2 5-9 2-8 44,462 LBS 7000 11225-SI 11-0 22-0 4-0 4-2 5-0 2-8 45,883 LBS 8000 11226-SI 11-0 22-0 4-6 4-8 5-9 3-0 49,708 LBS 9000 11276-SI 11-0 27-0 4-0 4-2 5-9 2-8 58,451 LBS 10000 11296-SI 11-0 29-0 4-6 4-8 5-9 3-0 61,949 LBS 11000 11348-SI 11-0 34-0 4-0 4-2 5-9 2-8 70,692 LBS
Environmental Delivering Reliability A Oldcastle Precast Oldcastle Precast is the leading manufacturer of precast concrete, polymer concrete, and plastic products in the United States. With a nationwide network of facilities, our products are always close at hand. Our employees are committed to upholding core values of reliability, quality, and service in revolutionary ways. Our attention to detail exceeds the expectations of customers from some of the largest companies in the U.S., across a spectrum of industries. Sales & Service 888-9 Oldcastle (888-965-3227) 2010 Oldcastle Precast, Inc. V1_121409