2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk S13 9DF Website: www.metalstechnology.co.uk Testing performed at the above address only PRODUCTS including: Manganese Steel, Tool Steel, Carbon Steel & Low Alloy DETAIL OF ACCREDITATION Chemical Analysis Elemental Analysis Si, Mn, P, Cr, Mo, Ni, Al, As, B, Ca, Co, Cu, Nb, Pb, Sn, Ti, V, W, Zr, Sb using Direct Reading Emission Spectroscopy and ICP-OES Stainless Steels Si, Mn, P, Cr, Ni, Mo, Sn, Ti, V, B, Ta, As, Cu, Nb, Al, Co, Pb, W, Zr Cast Iron Alloyed Iron Resulphurised Low Alloy Steel Resulphurised Stainless Steel Copper Base Alloys Si, Mn, P, Cr, Mo, Ni, Al, B, Co, Cu, Mg, Nb, Pb, Sn, Ti, V, As Si, Mn, P, Cr, Mo, Ni, Cu, Mg, Nb, V Fe, C, Si, Mn, P, S, Cr, Mo, Ni, Cu, Al, Pb Fe, C, Si, Mn, P, S, Cr, Mo, Ni, Cu, Nb, Ti, Al Cu, Sn, Zn, Fe, Ni, Al, Si, As, Mn, Bi, Sb, P, Pb, Co, Mg, S, Cr Copper Bronze Sn, Zn, Pb, P, Ni, Fe, Sb, As, Bi, S, Mn, Si, Al Copper-Nickel Alloys Brasses Ni, Cr, Fe, Mn, Si, Zr, Ti, Cu, Pb, Bi, Co, B, As, Zn Cu, Sn, Zn, Fe, Ni, Al, Si, As, Mn, Sb, Pb Cobalt Base Alloys Co, Fe, C, Si, Mn, Cr, Ni, Al, Nb, W, S, Mo, Cu Case manager: LL Page 1 of 5
including: (cont d) Aluminium Base Alloys Aluminium Bronze Nickel Base Alloys Nickel-Copper Base Alloys Titanium Base Alloys Iron Base Alloys (Including Carbon Steel, Low Alloy Steel, Manganese Steel, Tools Steel and Stainless steel) Nickel Base Alloys Aluminium Base Alloys Copper Base Alloys Cobalt Base Titanium Base Ferro Alloys Chemical Analysis (cont d) Elemental Analysis (cont d) Cu, Mg, Si, Fe, Mn, Ni, Zn, Pb, Sn, Ti, Cr, Sr, Zr, P, Be Cu, Sn, Zn, Pb, Ni, Fe, Al, Mn, Si, Co, Mg Ni, C, Si, Mn, P, S, Cu, Fe, Cr, Ti, Al, Co, Mo, Mg, W, Nb, V Ni, C, Si, Cu, Fe, Mn, Cr, Al, Ti, Co, P, S, Nb Mn, Cr, Mo, Ni, Al, Co, Cu, Sn, Ti, V, Zr, Fe, Si, Pb, Bi Al, Sb, As, Bi, B, Ca, Cr, Cu, Co, Fe, Pb, Mg, Mn, Mo, Ni, Nb, Si, Ta, Te, Sn, Ti, W, V, Zn, Zr Al, Sb, As, Bi, Cr, Cu, Co, Fe, Pb, Mg, Mn, Mo, Ni, Nb, P, Si, Sn, Ti, W, V, Zn, Zr Al, Sb, As, Bi, Be, Cr, Cu, Co, Fe, Pb, Mg, Mn, Ni, Nb, P, Si, Sn, Sr, Ti, V, Zn, Zr Al, Sb, As, Bi, Cr, Cu, Co, Fe, Pb, Mg, Mn, Mo, Ni, Nb, P, Si, Ag, Sn, Ti, W, V, Zn, Zr Al, Sb, As, B, Cr, Cu, Co, Fe, Pb, Mg, Mn, Mo, Ni, Nb, P, Si, Sn, Ti, W, V, Zn, Zr Al, Cr, Cu, Co, Fe, Pb, Mg, Mn, Mo, Ni, Nb, P, Si, Sn, Ti, V, Zn, Zr Al, Cr, Cu, Co, Pb, Mg, Mn, Mo, Ni, Nb, P, Si, Sn, Ti, W, V, Zr using Direct Reading Emission Spectroscopy and ICP-OES (cont d) using:- Atomic Absorption Spectro-photometry Case manager: LL Page 2 of 5
including: (cont d) Ferrous and Non-ferrous metals and alloys Hydrogen analysis Chemical Analysis (cont d) Elemental Analysis (cont d) Carbon and Sulphur content Oxygen content of Solid Nitrogen Content Steels (low alloy stainless) by hot extraction Titanium & titanium alloys by inert gas fusion Mechanical Tests Tensile (ambient temperature) (forces 5 kn to 500 kn) Tensile (temperatures up to 650 C) (forces 5 kn to 500 kn) Impact: Charpy V notch (-196 C and -130 C to ambient) Lateral expansion and % Shear using:- Atomic Absorption Spectro-photometry using Leco Oxygen fusion using Leco RH402 BS EN ISO 6892-1: 2016 ASTM E8/E8M-16a BS EN ISO 6892-2:2011 ASTM E21-09 BS EN ISO 148-1:2016 ASTM E23-16b Izod BS 131:Part 1:1961(2007) Hardness: Brinell HBW 10\3000 BS EN ISO 6506-1:2014 ASTM E10-17 Rockwell B and C BS EN ISO 6508-1:2016 ASTM E18-17e1 Vickers (HV10 & HV30) BS EN ISO 6507-1:2005 Bend BS EN ISO 7438:2016 Case manager: LL Page 3 of 5
Metallurgical Tests Decarburisation depth Documented In-House Method OP20 - Based on ASTM E1077-2014 Inclusion content ASTM E45-13 ISO 4967:2013 Grain size ASTM E112-13 BS EN ISO 643:2012 (withdrawn) ASTM E1181-02(15) ASTM E930-99(2015) Macro-etch examination Sulphur print Documented In-House Method OP9 Based on ASTM E381-17 ASTM A604/A604M-07(2017) API A 718 2 nd Edition Documented In-House Method OP8 ASTM E1180-08(2014) Volume fraction ASTM E562-11 Corrosion Tests Stainless Steels Pitting and crevice corrosion resistance Intercrystalline corrosion ASTM G48-11(2015) (Methods A & B) ASTM A262-15 Methods A, B, C and E BS EN ISO 3651-1:1998 Method A, B and C BS EN ISO 3651-2:1998 Nickel Alloys Intercrystalline corrosion BS EN ISO 9400:1996 Method A, B, C and D ASTM G28-02(15) Method A Case manager: LL Page 4 of 5
FERROUS and NON-FERROUS CASTINGS, FORGINGS, PLATE, WELDMENTS Mechanical and Metallurgical Tests Tests designated in specified welding codes as detailed below: Bend, Fracture, Hardness, Impact, Tensile, Macro-examination BS EN ISO 17637:2016 BS EN ISO 17639:2013 BS EN ISO 4136:2012 BS EN ISO 5173:2010 + A1(2011) BS EN ISO 5178:2011 BS EN ISO 9015-1:2011 BS EN ISO 9016:2012 BS 4872-1:1982 BS 4872-2:1976 BS EN ISO 9606-1:2013 BS EN ISO 15614-1:2017 BS EN ISO 15614-2:2005 ASME IX:2017 END Case manager: LL Page 5 of 5