S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent service in areas where boxes are subject to rough usage. Serve as pull boxes for conductors. Permit access to conductors for maintenance. Provide openings for making splices. llow connections for branch conduit runs. lank bodies for special conduit entrance arrangements. eatures orrosion-resistant ideal for indoor and outdoor installations. Weatherproof, raintight and dust-tight when used with cast gasketed covers. S and boxes take standard flush wiring devices. boxes take devices exceeding 1-5/8 in depth under fastening ears. Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock. oth malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit. ccurately tapped, tapered threads for tight, rigid joints, ground continuity. omplete selection of covers, receptacles, plugs, gaskets and accessories. overs have captive stainless steel screws to speed installation, prevent "freezing" of screws. Ground screw at top of box for easy access. ast Hub oxes vailable in single, two, three and four gang and tandem. Smooth, rounded integral bushing in each hub protects conductor insulation. lank odies for razed Hubs or rill and Tapped ntries vailable in single, two, three and four gang boxes. rill and tapped entries. razed threaded hubs for threaded conduit from thru 1- and brazed union hubs from thru 1-1/4. Smooth, rounded integral bushing in each hub protects conductor insulation. Ground screw at top of box for easy access. Standard Materials ast hub device boxes and boxes for drilling and tapping: malleable iron or copperfree (4/10 of 1% max.) aluminum razed hubs: malleable iron overs: malleable iron, steel, or copperfree (4/10 of 1% max.) aluminum Standard inishes Malleable iron boxes and covers: triple-coat (1) zinc electroplate, (2) chromate, and (3) aluminum polymer enamel luminum boxes and covers: epoxy powder coat Steel covers: zinc electroplate Screws: stainless steel Options nclosures drilled for 347 Volt devices. dd suffix -347. Gasket is designed so that it wraps around ridge top of ppleton aluminum or malleable iron device box. Result is a positive seal against moisture. ertifications and ompliances S Standard: 22.2 No. 18.1 S ertified: 001472 Reference ata When ordering drilled and tapped openings or brazed hubs for blank bodies, refer to S and ast evice oxes rilling and Tapping Information pages. commercial and industrial fittings: cst VI OXS 133
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. Malleable Iron luminum Size Weight kg (lb) atalog Number Weight kg (lb) atalog Number 0.88 (1.94) S-1 0.29 (0.64) S-1 3/4 1.02 (2.25) S-2 0.34 (0.75) S-2 1 0.88 (1.94) S-3 0.29 (0.64) S-3 1.22 (2.70) -1 0.41 (0.90) -1 3/4 eep 1.18 (2.60) -2 eep 0.42 (0.92) -2 1 1.27 (2.80) -3 0.43 (0.94) -3 0.77 (1.70) S-1 0.26 (0.57) S-1 3/4 0.73 (1.60) S-2 0.26 (0.58) S-2 commercial and industrial fittings: cst VI OXS 0.95 (2.10) -1 0.32 (0.70) -1 eep eep 3/4 0.91 (2.00) -2 0.30 (0.67) -2 0.95 (2.10) S-1 0.32 (0.70) S-1 3/4 1.09 (2.40) S-2 0.36 (0.80) S-2 1 0.93 (2.06) S-3 0.32 (0.70) S-3 1.27 (2.80) -1 0.43 (0.94) -1 3/4 eep 1.27 (2.80) -2 eep 0.43 (0.94) -2 1 1.36 (3.00) -3 0.45 (1.00) -3 0.77 (1.70) S-1 0.26 (0.57) S-1 3/4 0.99 (2.20) S-21 0.34 (0.74) S-21 1.13 (2.50) ST-1 0.38 (0.84) ST-1 3/4 1.13 (2.50) ST-2 0.38 (0.84) ST-2 1 1.02 (2.25) ST-3 0.34 (0.75) ST-3 1.36 (3.00) T-1 0.45 (1.00) T-1 3/4 eep 1.27 (2.80) T-2 eep 0.43 (0.94) T-2 1 1.41 (3.10) T-3 0.47 (1.03) T-3 0.99 (2.20) -1 0.34 (0.74) -1 eep eep 3/4 1.04 (2.30) -2 0.35 (0.77) -2 3/4 1.06 (2.34) SL-2 0.35 (0.78) SL-2 Use Unilets for wiring devices exceeding 1-5/8 in depth under fastening ears. 134
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. Size Malleable Iron luminum Weight kg (lb) atalog Number Weight kg (lb) atalog Number 0.82 (1.80) SS-1 0.27 (0.60) SS-1 3/4 0.82 (1.80) SS-2 0.27 (0.60) SS-2 1.12 (2.46) ST-1 0.37 (0.82) ST-1 3/4 1.06 (2.33) ST-2 0.35 (0.78) ST-2 1 eep 1.45 (3.20) T-3 eep 0.49 (1.07) T-3 1.25 (2.75) SX-1 0.41 (0.91) SX-1 3/4 1.06 (2.34) SX-2 0.35 (0.78) SX-2 imensions in Millimeters (Inches) 1.41 (3.10) X-1 0.47 (1.03) X-1 3/4 eep 1.36 (3.00) X-2 eep 0.48 (1.06) X-2 1 1.59 (3.50) X-3 0.53 (1.17) X-3 69.9 (2.75) 8 (3.28) 82.6 109.5 (3.25) (4.31) commercial and industrial fittings: cst VI OXS 47.8 (1.88) S and Single Gang evices Hub Size S 0.3 (0.75) 0.3 (0.63) 0.6 (1.38) 0.9 (2.00) 1.3 (2.75) 0.6 (1.38) 3/4 0.3 (0.75) 0.3 (0.75) 0.6 (1.38) 0.9 (2.00) 1.3 (2.75) 0.6 (1.38) 1 0.4 (0.88) 0.4 (0.88) 0.8 (1.25) 0.9 (2.00) 1.3 (2.75) 0.6 (1.38) 135
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. Single Gang overs escription Weight Per 100 kg (lb) atalog Number lank over, Steel Zinc lectroplate 5.44 (12.00) S-4 Round Receptacle over, Steel Zinc lectroplate Hole dia. 1-7/16" 5.44 (12.00) S-5 uplex Receptacle over, Steel Zinc lectroplate 4.54 (10.00) S-6 commercial and industrial fittings: cst VI OXS Round Receptacle over, Steel Zinc lectroplate Hole dia. 1-5/8" 5.44 (12.00) S-8 Tumbler Switch over, Steel Zinc lectroplate 5.44 (12.00) S-9 Tumbler Switch over, Steel Zinc lectroplate 9.98 (22.00) SK-ITS-G or pilot lamp Red Jewel mber Jewel Green Jewel Opal Jewel Single Gang Weatherproof overs 11.34 (25.00) SK-1J SK-1J SK-1JG SK-1JO lank over, Malleable Iron, Zinc lectroplate 25.40 (56.00) S-100G vailable in luminum: dd suffix - to atalog Number. lso for use with multiple gang Unilets with individual cover openings. 136
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. escription ast overs Only Weatherproof urnished with gasket and stainless steel screws atalog Number Malleable Iron Ridge Top luminum Ridge Top Receptacle cover with spring cover. Hole iameter 1-7/16 SK-1VRN Rocker type for square handle tumbler or toggle switches SK-1VN SK-1V-N or duplex flush receptacle with spring cover SK-1VR SK-1VR- Gasket Replacement or external operation of tumbler switches with square handles SK-1VTSN SK-1VTSN Operating type for square handle tumbler or toggle switches SK-1VSN SK-1VS-N Neoprene for use with cast S-GKR-1N S-GKR-1N ast overs Only urnished with stainless steel screws less gasket or standard 2 or 3 wire duplex receptacles SK-1R-N or round flush receptacles.hole dia. 1-7/16" SK-1R-ZN commercial and industrial fittings: cst VI OXS or square handle toggle switches SK-1TS-N or square handle toggle switches (with protecting guard) S-1TSG-N SK-1TSG-N 137
S and ast Hub evice oxes Weatherproof, Raintight and ust-tight overs for Ridge Top oxes. Receptacle Plug Pole/Wire Malleable Iron Ridge Top Receptacles atalog Number luminum Ridge Top Plug Receptacle cover has threaded aluminum cap. Plug has neoprene boot and aluminum fastening ring. urnished with receptacle, neoprene gasket, stainless steel screws. Non-Locking, U Shaped Grounding Type Receptacle takes U shaped or round grounding contact plugs 15 mp, 125V NM 5-15R NM 5-15P 2P, 3W SK5-15 SK5-15- SWP5-15 20 mp, 125V NM 5-20R NM 5-20P 2P, 3W SK5-20 SK5-20- SWP5-20 commercial and industrial fittings: cst VI OXS Locking Grounding Type 15 mp, 250V NM 6-15R NM 6-15P 2P, 3W SK6-15 SK6-15- SWP6-15 20 mp, 250V NM 6-20R NM 6-20P 2P, 3W SK6-20 SK6-20- SWP6-20 15 mp, 125V NM L5-15R NM L5-15P 2P, 3W SKL5-15 SWPL5-15 15 mp, 250V NM L6-15R NM L6-15P 2P, 3W SKL6-15 SWPL6-15 15 mp, 277V NM L7-15R NM L7-15P 2P, 3W SKL7-15 SWPL7-15 lso takes SWP5-15 Plugs. lso takes SWP6-15 Plugs. 138
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. Gray Iron luminum Size Weight kg (lb) atalog Number Weight kg (lb) atalog Number 1.22 (2.70) S-12 0.41 (0.90) S-12 3/4 1.18 (2.60) S-22 0.39 (0.87) S-22 imensions in Millimeters (Inches) 1.22 (2.70) -12 0.41 (0.90) -12 3/4 eep 1.22 (2.70) -22 0.41 (0.90) -22 1 1.27 (2.80) -32 eep 0.42 (0.93) -32 1.36 (3.00) S-12 0.45 (1.00) S-12 3/4 1.36 (3.00) S-22 0.45 (1.00) S-22 1.32 (2.90) -12 0.44 (0.97) -12 3/4 eep 1.36 (3.00) -22 eep 0.48 (1.06) -22 1 1.41 (3.10) -32 0.47 (1.03) -32-3/4 1.22 (2.70) S-212 0.41 (0.90) S-212 117.6 (4.63) 95.3 (3.75) 8 (3.28) 109.5 82.6 (4.31) (3.25) commercial and industrial fittings: cst VI OXS 47.8 (1.81) S and Two-Gang evices imensions in Millimeters (Inches) Hub Size S 19.1 (0.75) 16.0 (0.63) 35.1 (1.38) 50.8 (2.00) 69.9 (2.75) 58.7 (2.31) 3/4 19.1 (0.75) 19.1 (0.75) 35.1 (1.38) 50.8 (2.00) 69.9 (2.75) 58.7 (2.31) 1 22.4 (0.88) 22.4 (0.88) 31.8 (1.25) 50.8 (2.00) 69.9 (2.75) 58.7 (2.31) Hubs at top of illustration are. 139
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. Two Gang overs escription Weight Per 100 kg (lb) atalog Number lank over, Steel Zinc lectroplate 9.07 (20.00) S-42 Round Receptacle over, Steel Zinc lectroplate Hole dia. 1-7/16" 8.16 (18.00) S-52 commercial and industrial fittings: cst VI OXS Weatherproof overs uplex Receptacle over, Steel-Zinc lectroplate 6.80 (15.00) S-62 Tumbler Switch over, Steel Zinc lectroplate 9.07 (20.00) S-92 ombination uplex Receptacle and Tumbler Switch over, Steel - Zinc lectroplate ombination uplex Receptacle and Single Receptacle, Steel - Zinc lectroplate 6.80 (15.00) S-69 6.80 (15.00) S-65 lank over, Gray Iron 25.40 (56.00) S-200G or external operation of tumbler switches with square handles 113.40 (250.00) SK-2VTS Gasket Replacement Neoprene - for use with 2-gang cast covers above S-GKR-2N vailable in luminum: dd suffix - to catalog number. 140
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. S Three Gang odies Size Gray Iron luminum Weight kg (lb) atalog Number Weight kg (lb) atalog Number 3/4 3.60 (1.63) S-23 0.54 (1.20) S-23 1 eep 4.00 (1.81) -33 eep 0.60 (1.33) -33 Three Gang overs escription Weight Per 100 kg (lb) atalog Number uplex Receptacle over, Steel Zinc lectroplate 10.43 (23.00) S-63 Weatherproof overs imensions in Millimeters (Inches) 165.1 (6.50) 143.0 (5.63) 8 (3.28) 82.6 (3.25) 109.5 (4.31) 47.8 (1.81) Tumbler Switch, Steel Zinc lectroplate 11.34 (25.00) S-93 lank over, Gray Iron 54.43 (120.00) S-300G or external operation of tumbler or toggle switches with square handles Hub Size 1 19.1 (0.75) 22.4 (0.88) 149.69 (330.00) SK-3VTS 16.0 (0.63) 22.4 (0.88) 35.1 (1.38) 31.8 (1.25) S 50.8 (2.00) 50.8 (2.00) 69.9 (2.75) 69.9 (2.75) 55.6 (2.19) 55.6 (2.19) commercial and industrial fittings: cst VI OXS Three Gang evices vailable in luminum: dd suffix - to catalog number. 141
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. eatures Thick wall on all four sides. rill and tap anywhere on sidewalls. Ground screw at top of box for easy access. Two exterior mounting lugs. its standard sheet metal device covers with four mounting holes. Weatherproof when used with gasketed cast weatherproof device covers. Standard Materials Malleable iron or copperfree (4/10 of 1% max.) aluminum Standard inishes Malleable iron: triple-coat (1) zinc electroplate, (2) chromate, and (3) aluminum polymer enamel luminum: epoxy powder coat Reference ata When ordering drilled and tapped openings or brazed hubs for blank bodies, refer to S and ast evice oxes rilling and Tapping Information page. atalog Number escription Gray Iron O Unilets with Lugs: depth 2-19/32" Maximum hub size 1-" threaded, and 1-1/4" no-thread or union. luminum commercial and industrial fittings: cst VI OXS Single-Gang O-1 O-1 Two-Gang O-2 O-2 Three-Gang O-3 O-3 our-gang O-4 O-4 Unilets with Lugs: depth 2.69" Takes single gang covers Single-Gang -1L Two-Gang -2L Three-Gang -3L our-gang -4L 142
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. imensions in Millimeters (Inches) Spacing for Multi-Gang oxes 4.1 (0.16) 1.5 4.1 (0.06) (0.16) 73.2 (2.88) 61.2 (2.41) (0.13) R 7.1 (0.28) 22.6/ 0.89 (0.13) Ø 7.9 (0.31) 46.0 (1.81) 46.0 (1.81) 12.7 (0.50) #10-24 UN-2 1 Hole R 6.4 (0.25) R 6.4 (0.25) 122.2 (4.81) 109.5 (4.31) 96.8 (3.81) 8 (3.28) 73.2 (2.88) 82.6 (3.25) (0.13) #6-32 UN-2 Holes(0.13) O Unilets No. of Gangs 1 82.60 (3.25) 69.90 (2.75) 58.67 (2.31) 47.80 (1.88) 44.50 (1.75) 152.40 (6.00) 2 130.30 (5.13) 117.60 (4.63) 106.40 (4.19) 95.30 (3.75) 68.30 (2.69) 203.20 (8.00) 3 177.80 (7.00) 165.10 (6.50) 154.00 (6.06) 143.00 (5.63) 92.20 (3.63) 254.00 (10.00) 4 225.60 (8.88) 212.90 (8.38) 201.70 (7.94) 190.50 (7.50) 115.80 (4.56) 304.80 (12.00) 71.4 (2.81) 352.6 (13.88) 258.8 (10.19) 165.1 (6.50) 65.0 (2.56) (0.13) (0.13) (0.13) commercial and industrial fittings: cst VI OXS 82.6 (3.25) 115.8 (4.56) 22.4 (0.88) 160.3 (6.31) 141.2 (5.56) 101.6 (4.00) 8.6 (0.34) ia. 146.1 (5.75) 239.8 (9.44) 333.5 (13.13) 6 32 THR. Unilets with Lugs 143
S and ast Hub evice oxes Malleable Iron, luminum UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. Hub Information Listed below are the various types of brazed hubs which may be used with the Unilets and the O box. Threaded, no-thread and union hubs may be brazed at any desired location. It is possible to place more than five hubs on the top and bottom of three and four-gang Unilets. Look at the chart below for the maximum hub diameter and the minimum hub spacing distance. This chart, together with the Unilet dimensions will enable you to figure the maximum number of hubs which may be used. The hubs will be symmetrically placed about the axis of the Unilets unless exact dimensions are specified on the order. commercial and industrial fittings: cst VI OXS Maximum Hub Size Maximum Hub iameter Maximum istance etween onduit enters Size Threaded for Rigid onduit No Thread for Rigid onduit No Thread for lectrical Metallic Tubing S 1 3/4 3/4 3/4 Union 1-1-1/4 1-1/4 1-1/4 1-1/8 1-1-1/8 1-3/4 1-3/8 1-25/32 1-3/8 1-25/32 1 1-9/16 2-1/32 1-9/16 2-1/32 1-1/4 1-15/16 2-25/32 1-15/16 2-25/32 1-2-3/16 1-1/4 1-9/16 1-1/4 1-9/16 3/4 1-1-27/32 1-1-27/32 1 1-3/4 2-3/32 1-3/4 2-3/32 1-1/4 2-1/8 2-29/32 2-1/8 2-29/32 1-2-3/8 144
S and ast Hub evice oxes Malleable Iron, luminum UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. Ordering ata To determine the catalog numbers of Unilets with drilled and tapped entries or hubs, the following information should be shown: 1. Unilet catalog number. 2. Sketch number of entry arrangement selected from illustrations below. 3. ntry symbols taken from the table right. Start from the left on the top of the Unilet and continue in rotation clockwise around its body. Where no entry is required, the symbol X should be inserted. The three various divisions of the catalog number should be separated by dashes. Ordering xample: The Unilet selected is an O4 and the entry arrangement is sketch number 12. ntry, and are to be " drilled and tapped for rigid conduit; is to be a 1" hub and there is no entry at location. The catalog number will be as follows O4-12-111X. Single, Two, Three and our-gang ront view and oriented as mounted TOP OTTOM SIS 1 2 3 4 5 6 7 G G 8 9 10 11 12 13 14 Symbol Table Hub Size (Inches) razed Threaded Hub Symbol razed Union Hub Symbol lank X X 1 3/4 2 1 3 1-1/4 4 1-5 2 6 commercial and industrial fittings: cst VI OXS G H J H G 16 17 18 19 20 21 22 K J K L M M O N G H G J H G K J H G G L K J H G M L K J H 23 24 25 26 27 28 29 145