The accurate study of the proportions and modularity, led us to design a elementary module from the standard dimensions of around 2,5 x 5,5 x 3 meters. All modules are designed for minimal waste of space and with dimensions for optimal transport. This allows a wide possibility of aggregation and even to customize the final shape of the building. adaptable
+ transportable 2014 CONCEPT MODULAR PREFAB - MODULI ABITATIVI PREFABBRICATI
The concept which stand at the base of the elementary module is also environmentally friendly because involves the reuse of shipping containers. The use of a modular base, make possible infinite number of combinations and variations, allowing an infinite expansion. 20 module (shipping container) and proportional diagram demonstrating standard modular relationships.
DIMENSION Living 8 sq.m Kitchen 5 sq.m Bathroom 3,5 sq.m Master bedroom 13 sq.m modulable 1 Level 30 sq.m house
DIMENSION Living 13 sq.m Kitchen 5 sq.m Bathroom 3,5 sq.m Master bedroom 13 sq.m Bedroom 10 sq.m modulable 1 Level 50 sq.m house
DIMENSION Living 16 sq.m Kitchen 7 sq.m Bathroom 3,5 sq.m Master bedroom 13 sq.m Bedroom 12 sq.m modulable 4 Level 50 sq.m block apartments
DIMENSION Lv.0 Living 18 sq.m Kitchen 11 sq.m Bathroom 4 sq.m Master bedroom 17 sq.m modulable 2 Level 80 sq.m house DIMENSION Lv.1 Bedroom 11 sq.m Bedroom 14 sq.m Terrace 30 sq.m
modulable 2 Level 80 sq.m house 2014 CONCEPT MODULAR PREFAB - MODULI ABITATIVI PREFABBRICATI
The whole project has been designed to make energetically autonomous each installation. For this reason, the methods used in the design take into account different climatic conditions and adaptability of the modules. S u sustainable
The basic concept is that of an integrated energy system capable of "self-sustaining": the energy requirement is satisfied by the installation of the house. Integration into the home of a modern energy system, in which the motor is the clean and renewable energy. Integrated systems to increase energy efficiency and reduce water consumption to minimize waste. sustainable
We uses customized, tested and certified high cube ISO light steel structural modules for dwellings. SINGULAR MODULE MEASUREMENTS: 20 foot High Cube ISO LIGHT STEEL MODULE 20 (L) x 8 (W) x 9-6 (H) 6096 mm (l) x 2438 mm (w) x 2896 mm (h) ISO LIGHT STEEL SHIPPING MODULE BUILDING FOOTPRINT Dimensions: 16 x 20 / 4877 mm x 6096 mm Area: 320 ft2 / 30 m2 GROSS FLOOR AREA 320 ft2 / 30 m2 OUR STANDARD MEASUREMENTS: ROOF AREA 320 ft2 / 30 m2 BUILDING HEIGHT (EXCLUDES FOUNDATION HEIGHT) 9-6 / 2896 mm BUILDING CODE COMPLIANCE Our housing units are built in compliance with the following codes: IBC (international building code) 2010 International residential code International energy conservation code International fire code International electrical code International plumbing code International mechanical code technical detail
technical detail 2014 CONCEPT MODULAR PREFAB - MODULI ABITATIVI PREFABBRICATI CONTAINER HOUSE COST-EFFICIENT, EXPANDABLE, TRANSPORTABLE GENERAL The standard container for various purposes is suitable for international container transport. It is made of appropriate external dimensions and has connections for lifting and fixing or compounding. The container is designed as a light construction consisting of floor and roof frames and corner profiles. The construction enables compounding of individual containers in longitudinal and transverse directions without limits. DELIVERY: Containers can be delivered assembled or individually in kits 650 mm high. 4 kits can be bundled in packages 2591 mm high (ISO dimensions) DIMENSIONS and TARE (ISO Standard 1161) o External length 20 / (inner length) 20: 6.055m / (5.851m) o External width / (inner width): 2.435m / (2.231m) o External height / inner height: 2.790m / (2.510m) o Tare: 1950 Kgs STEEL FRAMEWORK o MATERIAL: cold formed steel profiles in a thickness of 3 to 4mm (bottom rails). o SURFACE WORKING: electric galvanization min 15 µm, zinc compatible epoxy ground coat in a thickness of 30µm, final zinc compatible vinyl acrylic coat in a thickness of 60-70µm. o FITTINGS : 8 comer fittings (dimensions according to ISO standard 1161), rainwater pipe in the roof framework, plate thickness of 10mm excluding top corner fittings of the top kit of each bundle (20mm thickness) o FORKLIFT OPENINGS: openings for fork-lift pockets in the floor framework, dim 88 250mm in a distance of 1200mm
technical detail 2014 CONCEPT MODULAR PREFAB - MODULI ABITATIVI PREFABBRICATI FLOOR o COMPOSITION: EXTERNAL WAINSCOT: flat galvanized steel sheet metal in a thickness of 0.5mm. INSULATION FILLING: non combustible mineral wool in a thickness of 100 mm among steel transverse supports. MINERAL WOOL DENSITY: 60 Kg/m3 STEAM BLOCKADE: PE foil in a thickness of 80µm PLYWOOD PANEL in a thickness of 18mm. o PERMITTED LOADING : 2.50 KN/m2 o COEFFICIENT OF THERMAL CONDUCTIVITY: l=0.039 W/mK o THERMAL RESISTANCE: 2.56 m2k/w o INSULATION OPTION: It is possible to choose an alternative insulation filling; extruded polystyrene (XPS) in a thickness of 80 mm XPS DENSITY: 35 kgs/cubic meter COEFFICIENT OF THERMAL CONDUCTIVITY: l=0.029 W/ mk THERMAL RESISTANCE: 2.76 m2k/w CEILING o COMPOSITION: external wainscot: flat galvanized and painted steel sheet metal in a thickness of 0.5mm. insulation filling: noncombustible mineral wool in a thickness of 100mm among plywood purlins. Mineral wool density: 60 Kg/m3 steam blockade: PE foil in a thickness of 80µm inner wainscot: chip wood panel in a thickness of 9 mm with a foil in white color; joining of chip wood panels with PVC profiles o METEOR WATER OUTLET: 4 each of PVC rainwater pipes, diameter 50mm in corner pillars o PERMITTED LOADING: 1.50 KN/m² o COEFFICIENT OF THERMAL CONDUCTIVITY: l=0.039 W/mK o THERMAL RESISTANCE : 2.56 m2k/w
FACADE WALLS SIDE PANELS WIDTH: 1145mm; total panel thickness: 70mm. Five panels fit into the long side and two panels fit into the short side of container and they are fully interchangeable. o COMPOSITION: o EXTERNAL WAINSCOT: galvanized and painted steel sheet metal in a thickness of 0.5mm. o INSULATION FILLING: non-combustible mineral wool in a thickness of 50mm in the wood framework. Mineral wool density: 60 Kg/m3 o INNER WAINSCOT: chip wood panel in a thickness of 9 mm with a foil in wood pattern (bright oak or white). o Joining of panels with PVC profiles. Final elements in the interior are made of chip wood panel in a thickness 8mm with a foil in wood pattern. o PERMITTED LOADING: 1.00 KN/m² o COEFFICIENT OF THERMAL CONDUCTIVITY: l=0.039 W/mK o THERMAL RESISTANCE :1.28 m2k/w o 100 MM INSULATION OPTION: The framework can be modified so that mineral wool insulation reaches a thickness of 100mm. In this case the thermal resistance goes up to: 2.56 m2k/w. Note: 100 mm thick wall panels are not fully interchangeable like standard 50 mm ones DOORS Standard external door, single fold, 40mm thick, made of: o a frame in pre-painted aluminum o hot galvanized and pre-painted steel sheets (inside and outside) o insulated with PL (polystyrene) o opening dimensions of 808 2030mm. o net opening dimensions: 754 x 1985 mm. o 845 x 2000 mm net opening is available technical detail
WINDOWS technical detail o Option 1: made of PVC, white color, dimensions 800 1100mm, glazed with double layer glass in a thickness of 4/15/4mm, with sliding mechanism (one side fixed and one sliding) o Option 2: made of PVC, white color, with dimensions 800 1100mm, glazed with double layer glass in a thickness of 4/15/4mm, with tilt and swing mechanism o Option 3: made of PVC, white color, with dimensions 800 1200mm, glazed with double layer glass in a thickness of 4/15/4mm, with tilt and swing mechanism ROLLING SHUTTERS o Option 1: external PVC rolling shutters in PVC guides. o Option 2: external Aluminum rolling shutters without insulation in Aluminum guides. o Option 3: external Aluminum rolling shutters with insulation in Aluminum guides. ELECTRICAL INSTALLATIONS o Standard: CE regulations o Voltage: 220 V, 60 Hz single phase o Network connections: CEE-connection plus/socket, 3-pole 32 A, 220V, o Inner distribution system: BVVB cables of suitable dimensions (6, 2.5, 1.5 mm),ce marked, flush-mounted. All cables (located on the ceiling and inside wall panels) run into CE certified plastic conduits. Roof cables and panel cables are connected with CE compliant jacks. All jack connections are protected inside CE marked and IP44 rated distribution boxes. o Protection: protective current switch (40/2E-0,03A), automatic fuses (B-characteristics) of suitable power (10A, 16A) o Earthing: galvanized connector with a steel plate of dimensions 30x80mm welded on the bottom frame.
PREFAB FLAT-PACK OFFICE/LIVING ROOM / CONTAINER HOUSE o o o o EASY INSTALLATION ENVIRONMENTAL HIGH QUALITY TIME & COST SAVING MAIN STRUCTURE Steel chassis and frame/sandwiched color steel plate DIMENSION internal: L 5.620 X W 2.120 X H 2.280 mm FRAME Steel structure FLOOR Steel structure; leather floor WALL Double side sandwich ROOF Galvanized steel plate; insulation layer; mineral wool DOOR Aluminum alloy WINDOW Plastic; Steel; aluminum alloy with shutter; push-pull / sliding ELECTRICITY One 12 way distribution box; lamps; one switch; 2 plugs; customer standards OPTIONAL Plumping; kitchen cabinet; bathrooms accessories; furniture; etc technical detail technical detail
technical detai
+39 / 011 19 32 39 70 +39 / 331 38 44 047 info@dp-group.org maurizio.devito enrico.damasio D&P Group SRL office: Headquarters: Legal head office: Largo Vittorio Emanuele II nr 82-10121 Torino - Italy Corso Re Umberto 5 bis 10121 Torino - Italy amministrazione@dp-group.org P.I.10906000012 Cap.Soc.10.000,00 R.E.A 1171243 Registro Imprese 35606800