Modular Systems in Shipbuilding

Transcription

1 Modular Systems in Shipbuilding

2 The Innovative NEPTUNE PANEL Systems Through extensive research CARETTA INTERIOR SYSTEMS has developed NEPTUNE PANEL Series as an effective response to the new standards of shipbuilding. As weight has become of great importance in shipbuilding, controlling major factors such as interior outfitting panels in accomodation is a must. NEPTUNE PANELS are standard size, or madeto-order in accordance to clients specifications. They come in a wide variety of finishes or rough finished to fit your own decorative finishes. The Panels combine ergonomics with beautiful finishes as they are made of non-combustible materials; they are certified by DNV and have full compliance with IMO & SOLAS standards.

3 Panel Types Wall Panel 24 mm Panel Types Wall Panel 50 mm Standard panel NEPTUNE PANEL with cabling duct 4 5 Double partition wall Type Finish B-30 Class bhd Wall panel 24 mm IMO resolution 754 (18) Med-B 24 mm+/-0.3 mm mm width x mm standard length (max mm x mm) Painted, laminated, wallpaper, leather, fabric, smooth, rough Double partition wall Type Finish B-50 Class bhd (A60 in combination with steel or aluminum bhd) Wall panel 50 mm IMO resolution 754 (18) Med-B 50 mm +/- 0.3 mm mm width x mm standard length (max mm x mm) Painted, laminated, wallpaper, leather, fabric, smooth, rough NEPTUNE PANEL with reinforcement steel profile

4 Tailor-made Panels & Ceilings Ultra lightweight ceiling panels available at all decorative finishes: lacquer, tapestry, veneer, leather, fabric or rough for client s personal decoration application. 6 7 Available finishes: Tailor-made shapes available in B & C-class ceiling panels Leather Veneer Painted

5 Modular Systems CARETTA modular systems are applied in complete interior outfitting of cabin units or interior spaces, where prefabrication is effective. They are supplied complete with all electrical and cable wiring, and special reinforcements for furnishing applicatios R1072 R Window frames Made-to-order panels R1791 R R1821 R T-corner Corner Corner R1891 R1891 R1921 R1921

6 Ceilings Panels B-Class ceiling panels 3M Velcro Type 10mm B-15 (A60 in combination with steel bulkhead) Type Neptune cladding ceiling panel C2 screwed on structure IMO resolution 754 (18) Nb Med-B-380 Ec 23mm IMO resolution 754 (18) Nb Med-B-3579 Ec 10 mm+/-0.5 mm Weight 23 mm+/-0.5 mm mm width x mm standard length (max mm x mm) 9.7 kgs/m 2 Weight Torelances mm width x mm standard length (max mm x mm) 9.7 kgs/m 2 +/- 0.5 mm Length +/- 0.5 mm Rectangularity +/- 1.5 mm

7 Cabin Units CARETTA cabin units are certified by DNV. They are easy to assemble on board and are manufactured on a made-to-order basis following Designer s specifications. Wet Units CARETTAS wet units are certified under DNV and consist of CARETTA panels as main structure. They are available in custom-made series in accordance to Architect s or Designer s specifications

8 Fire Doors Panels Decorative finishing Tailor made constructions in virtually any shape and specification. Infinite variety of finishes according to client s or designer s specifications: lacquer, veneer, laminate, paint, leather. Wallpaper Smooth A-Class single leaf hinged door B-Class single leaf hinged door CARETTA A-Class door. CARETTA B-Class door. Class A-60 fire class single hinged door. IMO FTPC part 3 (IMO resolution A754 (18). Class B-30 fire class single hinged door. IMO FTPC part 3 (IMO resolution A754 (18). Rough Nb Med-B-3576 Ec Nb Med-B-3577 Ec 45 mm+/-0.5 mm Max clear opening mm width x mm height 33 mm+/-0.5 mm Max clear opening 950 mm width x mm height Painted Doorblade Lightweight board of mineral wool insulation and glass fiber reinforced silicate surface, (NO METAL STEEL SHEET). Inner reinforcement steel edge profile and outer galv. Steel, brass, aluminum, PVC coated steel skins or st/st edge trim. Preparation for modular locks, reinforced for over-heated door closer on pull side. Doorblade Lightweight board of mineral wool insulation and glass fiber reinforced silicate surface, (NO METAL STEEL SHEET). Inner reinforcement steel edge profile and outer galv. Steel, brass, aluminum, PVC coated steel skins or st/st edge trim. Preparation for modular locks, reinforced for over-heated door closer on pull side. Frame Hardware Sill Finish 3mm Z profile in mild steel, welded to bulkhead. 3 steel hinges, modular series locks or latches and accessories level handle. U profile or coaming mild steel. Primed, backed enamel paint, finish painting, laminated, PVC film, galvanized or stainless steel skin. Frame Hardware Sill Finish 1.5mm profiled steel frame with loose fixing profile to cap bulkhead panels 22-50mm thick, in back enamel paint, primed or finished paint. 3 st/st hinges, modular series locks or latches and accessories level handle. Inverted U channel instainless steel. Primed, backed enamel paint, finish painting, laminated, PVC film, galvanized or stainless steel skin. Laminated Veneer

9 Office: 12 Dilou str, Athens 11527, Greece Factory: Industrial Area of Aspropyrgos Aspropyrgos, Attika, Greece Tel: Fax: D design by Adore-design.blogspot.com