LED solutions Module PREMIUM
Module PREMIUM gives you the option of setting the colour temperature of white light to any value. PREMIUM System LED Driver The PREMIUM system is available as a kit with LED modules and a pre-configured converter. The set enables the sequence of daylight to be simulated in spotlights as well as in linear, decorative and planar lighting. LED module for spotlights: 2,700 6,500 K with a of > 90 for decorative lighting: 3,000 6,000 K with a of > 80 for linear and wide area lighting: 3,000 6,000 K with a of > 80 and 2,700 6,500 K with a of > 90 Spotlight Linear area Wide area Decorative Engine SLE 2,700 6,500 K Engine LLE 2,700 6,500 K Engine QLE 2,700 6,500 K page 4 page 6 page 9 page 12 Engine CLE 3,000 6,000 K With the right colour temperature and illumination it is possible to feel comfortable despite artificial lighting whether you are working in an office, studying at university or recovering in hospital. The solution simulates natural daylight and can adapt to personal requirements. For example, the well-being of patients in healthcare facilities is improved and the healing process is accelerated. Students and office workers also benefit from this lighting system as they are able to concentrate for longer and are more productive. The colour temperature can be set to any value. The colourswitch mode available for spotlights enables the light colour to be selected specifically for the application. This is useful particularly in the retail sector as it allows the merchandise to be presented in the most appropriate light. The system can also be dimmed between 100 % and 3 % (15 % for SLE and 10 % for CLE) without shifting the colour temperature. The system is precalibrated at the factory and can be used immediately without any further adjustment. 2
Module PREMIUM Typical applications Office and Education Retail Health Care Simulation of the changes in natural light throughout the day Increased concentration and productivity Product-specific lighting Seasonal lighting Simulation of the changes in natural light throughout the day Improved well-being Therapeutic support Sample application in an office 08:00 Warm white light gets the day off to an agreeable start 10:30 Artificial lighting is turned down as more daylight becomes available, light colour is made more intermediate 12:00 Just as outdoors, the colour temperature reaches its maximum level at midday 14:30 Intermediate white luminaires supplement the general lighting and compensate for low levels of daylight 17:00 When darkness falls, artificial lighting ensures a balanced ratio of warm white light components 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 Changes in the light in the course of a day 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 These timelines show various ways of modifying colour temperature in a biologically effective manner: the upper timeline and the series of photos show variation that is synced with daylight. The lower timeline uses biologically effective light to speed up the inner body clock in the morning; this has a positive impact on sleep behaviour. The typical afternoon dip in energy levels is also compensated by an invigorating light component. Biologically effective changes in the light 3
Engine SLE For Spotlights Typical applications SLE PREMIUM KIT mit LED-Driver At a glance: Engine SLE PREMIUM Colour temperature: 2,700 K to 6,500 K; (dimmable and controllable colour temperatures along the planckian curve) Extended colour space for individual colour spectrum e.g. for lighting for food Colour rendering/colour tolerance: > 90 / MacAdam 3 Dimming range of 100 to 15 % without changing the colour temperature Low-profile LED Drivers with digital interface (DALI DT8, DSI, switchdim, colourswitch) and very low standby power (<0.5 W) Luminous flux (tp = 65 C): 2,050 lm or 1,350 lm Long lifetime of 50,000 hours System guarantee: 5 years SLE PREMIUM KIT 4
Engine SLE For Spotlights STARK-SLE-2000-927-965-PRE-KIT STARK-SLE-1400-927-965-PRE-KIT Tolerance range for electrical and optical data: ±10 % System components LMAI + SLE-2000 LMAI + SLE-1400 Colour temperature 2,700 K 6,500 2,700 K 6,500 Mac Adam Typ. luminous flux Typ. power consumption. (W) System efficacy (lm/w) without housing with housing 2,050 > 90 31.7 65 Ø 50 89601743 89601742 1,350 > 90 22.2 61 Ø 50 89601741 89601740 Matching Driver Driver remote LCAU 2x020/0048 L020 one4all 28000887 Driver built-in LCAU 2x020/0048 L010 one4all 28000907 Driver LMAI 44/500 P020 SPI 48V (already in KIT included) STARK-SLE-2000-927-965-PRE-KIT STARK-SLE-1400-927-965-PRE-KIT Matching connection cable Accessory CONNECT RJ45/RJ45 Connection Length (m) RJ45/RJ45 1,0m Driver LCAU to 24166480 1 RJ45/RJ45 2,0m Driver LMAI 24166481 2 10PIN PLUG/10 PIN PLUG 0,2m Driver LMAI to Module 24166482 0,2 The appropriate cap for an uniform distribution of light Accessory LENS MIXING CAP LED MIXING CAP SLE LED MIXING CAP STARK SLE 1500 88167564 LED MIXING CAP STARK SLE 2500 88167565 Matching accessories DALI Touchpanel 02 x/e-touchpanel02 DALI Touchpanel 02 28000022 x/e-touchpanel 02 28000005 5
Engine LLE For Linear and Wide Area Lighting Typical applications At a glance: Engine LLE PREMIUM LLE PREMIUM KIT LED modules also available individually Linear system with infinitely adjustable colour temperature between 3,000 K and 6,000 K, Generation 2 between 2,700 K and 6,500 K Available in > 80 and > 90 Sets calibrated at the factory to ensure high quality of light and colour consistency () across the entire adjustable range Dimming range of 100 % to 10 % without changing the colour temperature, Generation 2 from 100 % to 3 % Low-profile LED Drivers with digital interface (DALI DT8, DSI, switchdim, colourswitch) and very low standby power Linear LED modules with 700 lm and 1,500 lm Long lifetime of 50,000 hours System guarantee: 5 years LLE PREMIUM with 700 lm 6
Engine LLE For Linear and Wide Area Lighting Engine LLE Premium > 80 (calibrated kit) Typ. luminous flux Typ. power draw (W) System efficacy (lm/w) per module STARK LLE 3x24-280-700-830-860-PRE-KIT (1 LED-Driver 38 W + 3 LED-Module) STARK LLE 4x24-280-700-830-860-PRE-KIT (1 LED-Driver38 38 W + 4 LED-Module) STARK LLE 5x24-280-700-830-860-PRE-KIT (1 LED-Driver 38 W + 5 LED-Module) STARK LLE 3x24-280-1500-830-860-PRE-KIT (1 LED-Driver 75 W + 3 LED-Module) STARK LLE 4x24-280-1500-830-860-PRE-KIT (1 LED-Driver 75 W + 4 LED-Module) 2,000 > 80 20 up to 90 24 x 280 89601896 2,650 > 80 26 up to 92 24 x 280 89601897 3,350 > 80 32 up to 95 24 x 280 89601898 4,300 > 80 40 up to 101 24 x 280 89601899 5,700 > 80 52 up to 103 24 x 280 89601900 STARK LLE 5x24-280-1500-830-860-PRE-KIT (1 LED-Driver 75 W + 5 LED-Module) Tolerance range for optical data: ±5 % and tolerance range for electrical data: ±15 %. 7,150 > 80 63 up to 106 24 x 280 89601901 Typ. luminous flux TW LLE G1 24x280mm 700lm 827-865 PRE (LED Module) 2,700 6,500 645 715 > 80 > 80 280 x 24 280 x 24 TW LLE G1 24x280mm 1500lm 827-865 PRE 2,700 1,290 > 80 280 x 24 (LED Module) 6,500 1,430 > 80 280 x 24 Tolerance range for optical data: ±5 % and tolerance range for electrical data: ±15 %. 89602390 89602391 Engine LLE Premium > 90 (calibrated kit) Typ. luminous flux Typ. power draw (W) System efficacy (lm/w) per module LLE 24x280mm 3x700lm 930-960 PRE KIT (1 LED-Driver 38 W + 3 LED-Module) LLE 24x280mm 4x700lm 930-960 PRE KIT (1 LED-Driver 38 W + 4 LED-Module) LLE 24x280mm 5x700lm 930-960 PRE KIT (1 LED-Driver 38 W + 5 LED-Module) LLE 24x280mm 3x1500lm 930-960 PRE KIT (1 LED-Driver 75 W + 3 LED-Module) LLE 24x280mm 4x1500lm 930-960 PRE KIT (1 LED-Driver 75 W + 4 LED-Module) 2,000 > 90 20 up to 100 24 x 280 89602734 2,650 > 90 26 up to 102 24 x 280 89602735 3,350 > 90 32 up to 105 24 x 280 89602736 4,020 > 90 40 up to 98 24 x 280 89602737 5,360 > 90 52 up to 101 24 x 280 89602738 LLE 24x280mm 5x1500lm 930-960 PRE KIT (1 LED-Driver 75 W + 5 LED-Module) Tolerance range for optical data: ±5 % and tolerance range for electrical data: ±15 %. 6,700 > 90 63 up to 104 24 x 280 89602739 Typ. luminous flux LLE 24x280mm 700lm 927-965 PRE (LED Module) 2,700 6,500 630 685 > 90 > 90 24 x 280 24 x 280 LLE 24x280mm 1500lm 927-965 PRE 2,700 1,260 > 90 24 x 280 (LED Module) 6,500 1,370 > 90 24 x 280 Tolerance range for optical data: ±5 % and tolerance range for electrical data: ±15 %. 89602732 89602733 7
Engine LLE For Linear and Wide Area Lighting Engine, Module LLE Premium > 90 NEW Typ. luminous flux per module LLE G2 24x280mm 3x700lm 927-965 LV PRE (1 LED Driver 50 W + 3 LED module à 700 lm) LLE G2 24x280mm 4x700lm 927-965 LV PRE (1 LED Driver 50 W + 4 LED module à 700 lm) LLE G2 24x280mm 5x700lm 927-965 LV PRE (1 LED Driver 50 W + 5 LED module à 700 lm) LLE G2 24x280mm 6x700lm 927-965 LV PRE (1 LED Driver 50 W + 6 LED module à 700 lm) LLE G2 24x280mm 2x1500lm 927-965 LV PRE (1 LED Driver 50 W + 2 LED module à 1,500 lm) LLE G2 24x280mm 3x1500lm 927-965 LV PRE (1 LED Driver 50 W + 3 LED module à 1,500 lm) LLE G2 24x280mm 4x1500lm 927-965 LV PRE (1 LED Driver 100 W + 4 LED module à 1,500 lm) LLE G2 24x280mm 5x1500lm 927-965 LV PRE (1 LED Driver 100 W + 5 LED module à 1,500 lm) 2,100 > 90 20.5 up to 102 24 x 280 89602931 2,800 > 90 26.4 up to 106 24 x 280 89602932 3,500 > 90 32.0 up to 109 24 x 280 89602933 4,200 > 90 38.4 up to 109 24 x 280 89602934 3,000 > 90 28.6 up to 104 24 x 280 89602935 4,500 > 90 41.1 up to 109 24 x 280 89602936 6,000 > 90 54.1 up to 110 24 x 280 89602937 7,500 > 90 67.3 up to 111 24 x 280 89602938 LLE G2 24x280mm 6x1500lm 927-965 LV PRE (1 LED Driver 100 W + 6 LED module à 1,500 lm) Tolerance range for optical data: ±5 % and tolerance range for electrical data: ±15 %. 9,000 > 90 79.9 up to 112 24 x 280 89602939 NEW Typ. luminous flux TW LLE G2 24x280mm 700lm 927-965 PRE (LED module) 2,700 6,500 670 740 > 90 > 90 24 x 280 24 x 280 TW LLE G2 24x280mm 1500lm 927-965 PRE 2,700 1,470 > 90 24 x 280 (LED module) 6,500 1,610 > 90 24 x 280 Tolerance range for optical data: ±5 % and tolerance range for electrical data: ±15 %. 89602922 89602923 Matching Driver STARK LLE (in each KIT included) Matching Driver LLE G2 (in each KIT included) Driver LCAI 38 W TW lp Driver LCAI 75 W TW lp Driver LCA 50W 350 1050mA DT8 lp PRE Driver LCA 100W 350 1050mA 2xDT8 lp PRE : 360 x 30 x 21 mm 3 5 LLE modules à 700 lm : 360 x 30 x 21 mm 3 5 LLE modules à 1,500 lm : 360 x 30 x 21 mm 3 6 LLE Module à 700 lm 2 3 LLE Module à 1,500 lm : 360 x 40 x 21 mm 3 6 LLE Module à 1,500 lm 8
Engine QLE For Wide Area Lighting Typical applications At a glance: Engine QLE PREMIUM Module QLE Shallow PRE Engine QLE PREMIUM Quadratic system with adjustable colour temperature between 3,000 K and 6,000 K, Generation 2 between 2,700 K and 6,500 K at constant luminous flux Available in > 80 and > 90 Precalibrated set for optimum quality of light and colour consistency (), consisting of an LED driver and 2 6 quadratic LED modules LED modules are also available individually Dimming range of 100 10 % with no change in colour temperature, Generation 2 with 100 3 % Low-profile LED drivers with digital interface (DALI DT8, DSI, switchdim, colourswitch) Long lifetime of 50,000 hours with 5-year system guarantee 9
Engine QLE For Wide Area Lighting Engine, Module QLE Premium > 80 Typ Typ. luminous flux Typ. power consumption (W) System efficacy (lm/w) per module TW QLE G1 270mm 4x1250lm 830-860 PRE KIT (1 LED Driver + 4 LED Module à 1,250 lm) TW QLE G1 270mm 5x1250lm 830-860 PRE KIT (1 LED Driver + 5 LED Module à 1,250 lm) 5,120 > 80 38.7 up to 132 270 x 270 89600647 6,400 > 80 48.5 up to 132 270 x 270 89602481 TW QLE G1 270mm 6x1250lm 830-860 PRE KIT (1 LED Driver + 6 LED Module à 1,250 lm) Tolerance range for optical data: ±5 %, Tolerance range for electrical data: ±15 %, tp = 45 C 7,680 > 80 57.8 up to 133 270 x 270 89602482 Typ Typ. luminous flux per module TW QLE G1 270mm 1250lm 827-865 PRE (LED Modul) 2,700 6,500 1,290 1,430 > 80 > 80 270 x 270 270 x 270 Tolerance range for optical data: ±5 %, Tolerance range for electrical data: ±15 %, tp = 45 C 89600648 Engine, Module QLE Premium > 90 Typ Typ. luminous flux Typ. power consumption (W) System efficacy (lm/w) per module QLE 270mm 4x1250lm 930-960 PRE KIT (1 LED Driver + 4 LED Module à 1,250lm) QLE 270mm 5x1250lm 930-960 PRE KIT (1 LED Driver + 5 LED Module à 1,250lm) 5,160 > 90 39 up to 133 270 x 270 89602741 6,450 > 90 49 up to 133 270 x 270 89602742 QLE 270mm 6x1250lm 930-960 PRE KIT (1 LED Driver + 6 LED Module à 1,250lm) Tolerance range for optical data: ±5 %, Tolerance range for electrical data: ±15 %, tp = 45 C 7,740 > 90 58 up to 134 270 x 270 89602743 Typ Typ. luminous flux per module QLE 270mm 1250lm 927-965 PRE (LED Modul) 2,700 6,500 1,240 1,350 > 90 > 90 270 x 270 270 x 270 Tolerance range for optical data: ±5 %, Tolerance range for electrical data: ±15 %, tp = 45 C 89602740 Matching Driver (in each KIT included) Driver LCAI 75W 250mA TW lp : 360 x 30 x 21 mm 4 6 QLE Module à 1.250 lm 10
Engine QLE For Wide Area Lighting Engine, Module QLE Premium > 90 NEW Typ Typ. luminous flux Typ. power consumption (W) System efficacy (lm/w) per module QLE G2 270x270mm 2x1250lm 927-965 LV PRE (1 LED Driver 50 W + 2 LED module à 1,250lm) QLE G2 270x270mm 3x1250lm 927-965 LV PRE (1 LED Driver 50 W + 3 LED module à 1,250lm) QLE G2 270x270mm 4x1250lm 927-965 LV PRE (1 LED Driver 50 W + 4 LED module à 1,250lm) QLE G2 270x270mm 5x1250lm 927-965 LV PRE (1 LED Driver 100 W+ 5 LED module à 1,250lm) 2,500 > 90 19.8 up to 126 270 x 270 89602940 3,750 > 90 28.4 up to 132 270 x 270 89602941 5,000 > 90 36.9 up to 135 270 x 270 89602942 6,250 > 90 46.5 up to 134 270 x 270 89602943 QLE G2 270x270mm 6x1250lm 927-965 LV PRE (1 LED Driver 100 W + 6 LED module à 1,250lm) Tolerance range for optical data: ±5 %, Tolerance range for electrical data: ±15 %, tp = 45 C 7,500 > 90 55.1 up to 136 270 x 270 89602944 NEW Typ Typ. luminous flux Typ. power consumption (W) Module efficacy (lm/w) per module TW QLE G2 270x270mm 1250lm 927-965 PRE (LED module) 2,700 6,500 1,250 1,360 > 90 > 90 8.1 8.1 154 167 270 x 270 270 x 270 Tolerance range for optical data: ±5 %, Tolerance range for electrical data: ±15 %, tp = 45 C 89602924 Matching Driver (in each KIT included) Driver LCA 50W 350 1050mA DT8 lp PRE Driver LCA 100W 350 1050mA 2xDT8 lp PRE : 360 x 30 x 21 mm 2 4 QLE Module à 1.250 lm : 360 x 40 x 21 mm 5 6 LLE Module à 1.200 lm 11
Engine CLE For decorative pendant and surfacemounted ceiling luminaires Typical applications CLE PREMIUM 541 mm CLE PREMIUM 261 mm At a glance: Engine CLE PREMIUM Circular system with adjustable colour temperature from 3,000 to 6,000 K at constant luminous flux Sets calibrated at the factory to ensure high quality of light and colour consistency () across the entire adjustable range Dimming range 10 100 % without change of colour temperature Low-profile LED Driver with digital interface (DALI Device 8, DSI, switchdim, colourtemperature) Self cooling (no additional heat sink required) Long life-time of 50,000 h and 5-year system guarantee CLE PREMIUM 401 mm 12
Engine CLE For decorative pendant and surfacemounted ceiling luminaires Typ. luminous flux Typ. power draw (W) System efficacy (lm/w) per module TW CLE G1 261mm 4x1150lm 830-860 PRE KIT (1 LED-Driver + 4 LED-Module) TW CLE G1 401mm 4x2450lm 830-860 PRE KIT (LED-Driver + 4 LED-Module) 3.000 6.000 3.000 6.000 4.650 > 80 28,4 up to 160 261 x 261 89602612 9.610 > 80 58 up to 162 401 x 401 89602613 TW CLE G1 541mm 8x900lm 830-860 PRE KIT (1 LED-Driver + 8 LED-Module) 3.000 6.000 Toleranzbereich elektrische Daten: ±5 %. Toleranzbereich lichttechnische Daten: ±15 % 7.410 > 80 43,5 up to 166 541 x 35 89602614 13
Lighting management comfortdim, comfortable lighting for unrestricted freedom With the comfortdim light management system from Tridonic you have unlimited control of your lighting solution. comfortdim is based on two principles: comfort and independence: Your projects benefit from simplicity and maximum flexibility. At start-up and beyond. DALI x/e-touchpanel 02 Touch panel With the DALI x/e-touchpanel 02 you can program lighting scenes and RGB colour mixes and call them up them via the graphical user interface as well. The panel also includes a sequencer which is used to automate calendar-controlled se-quences. 6000K 5000K 4000K 3000K 6h 8h 10h 12h 14h 16h 18h Farbtemperatur MIN 2000 Tc MAX 6500 Tc Lichtpegel MIN 100 % MAX 100 % START Test The daylight sequence enables the colour temperature of the light to change throughout the course of the day. DALI TOUCHPANEL 02 Touch panel Setting up and operating DALI systems Tridonic touch panels enable you to accomplish this conveniently via a graphical user interface. DALI TOUCHPANEL 02 has a keypad with user-selectable key functions for manually controlling lighting groups and lighting scenes. It is programmed by using masterconfigurator software, which is available free of charge. DALI XC comfortdim momentary-action switch module Conventional momentary-action switches can be connected quickly and easily to the comfortdim XC module. This gives you the opportunity to custom design your lighting. These momentary-action switch modules are used to group luminaires together, define scenes and program macros. also allows colour temperature variations. 14
Prepared for the Future Our Activities and Locations Los Angeles, USA Spennymoor, UK Dornbirn, Austria Jennersdorf, Austria IoT applications Emergency technology Networked hardware technology LED module technology Niš, Serbia LED driver technology Ennenda, Switzerland Sensor technology Shenzhen, China LED driver technology Headquarteres Production site Research and development Sales off ice 1,700 6 3 Around 1,700 employees throughout the world are committed to helping you with their know-how and creativity to create the perfect light. There are six research and development centres in which new LEDs and networked lighting technologies are being developed. There are three things you can rely on at Tridonic: optimum product quality, decades of expertise and our committed and flexible support. 21 With 21 branch off ices on five continents we are there for you wherever you are in the world. 2,700 That s how many patents and inventions testify to Tridonic s extraordinary powers of innovation. Details For further information, data sheets, product catalogues and ordering details, please go to www.tridonic.com 15
Support and advice From a single source Engine DLE Engine CLE Engine CLE Integrated Engine LLE-FLEX Engine SLE Engine EM ready2apply Engine LLE Engine QLE We will help you to create lighting solutions that are unbeatable in terms of economy and functionality, according to the slogan: We devote all our energy to your light. As an international company, Tridonic is represented worldwide by 30 branch offices and partners in 73 countries. Headquarters Tridonic GmbH & Co KG Färbergasse 15 6851 Dornbirn, Austria T +43 5572 395-0 F +43 5572 20176 www.tridonic.com sales@tridonic.com Light you want to follow. 09/17 Subject to change without notice. Errors and omission excepted.