ABRASIVES Abrasives SECTION PAGE NO. SURFACE CONDITIONING -1-1 TO 6 COATED ABRASIVES -2-1 TO 10 BONDED ABRASIVES -3-1 TO 4 TABLE OF CONTENTS 1 SURFACE CONDITIONING ABRASIVE ARCSTRIP & CLEAN AND STRIP DISCS...........-1-2 COMBINATIONFLAPWHEELS....................-1-3 CROSS BUFFS & POLISHING DISCS..............-1-3 RADIAL BRISTLE DISCS........................-1-4 ROLOC DISCS................................-1-1 ROLOC BRISTLE DISCS......................-1-4 SCOTCH-BRITE DISCS & SCUFF PADS...........-1-2 BRUSHES NYLON CUP..................................-1-6 TUBE BRUSHES..............................-1-6 WIRE WHEELS & BRUSHES.....................-1-4 2 COATED ABRASIVES ABRASIVE BACK-UP PADS...............................-2-6 CARTRIDGE ROLLS...........................-2-10 CLOTH......................................-2-2 FLAP DISCS..................................-2-7 FLAP WHEELS................................-2-9 PORTABLE BELTS.............................-2-10 PSA DISCS...................................-2-3 RESIN FIBRE DISCS...........................-2-6 ROLLS.......................................-2- ROLOC DISCS................................-2-1 SOCATT STYLE DISCS.........................-2-2 SPIRAL BANDS...............................-2-10 TRIM-KUT DISCS.............................-2-6 WET OR DRY.................................-2-3 BONDED ABRASIVES ABRASIVE COMBINATION CUTTING & GRINDING WHEELS....-3-1 CUT-OFF WHEELS............................-3-2 DIAMOND COATED MANDRELS.................-3-4 MOUNTED POINTS............................-3-4 CUT-OFF WHEELS MINI...........................-3-1 GRINDING WHEELS BENCH GRINDER.............................-3-3 DRESSERS...................................-3-4 TYPE 27.....................................-3-3 TYPE 27 FLEXIBLE............................-3-3 Page 1
Service That Works We Feature a complete line of Abrasive products Surface Conditioning Quality roloc style and hand pad discs Brite strip and clean strip discs Cross buffs and polishing discs Steel wool and bristle discs Wire wheels and tube brushes Bonded Abrasives Durable cut-off wheels Type27/ flexible,imported grinding wheels Bench and type 11/dresser grinding wheels Mounted points Coated Abrasives Roloc & Socatt style discs Abrasive cloths and PSA discs Autobody file sheets and abrasive rolls Waterproof autobody paper Resin fiber discs & abrasive accessories Trim-kut discs, flap disc abrasives, and flap wheels Abrasive belts & cartridge rolls Page 2
Surface Conditioning 1 ABRASIVE ROLOC DISCS POWER-BRITE SURFACE CONDITIONING DISCS Color Qty 0 Pack 100PK w/holder Per Box 2 Coarse Brown 821.074800 0 821.074800.1 821.074800.100 2 Medium Maroon 821.074810 0 821.074810.1 821.074810.100 2 Very Fine Blue 821.0710 0 821.0710.1 821.0710.100 3 Coarse Brown 821.07480 2 821.07480.1 821.07480.100 3 Medium Maroon 821.074860 2 821.074860.1 821.074860.100 3 Very Fine Blue 821.07130 2 821.07130.1 821.07130.100 4 Coarse Brown 821.074820 2 4 Medium Maroon 821.074830 2 Newest generation of non-woven abrasives High initial rate of cut Resists loading on soft materials Removes old gaskets, coatings and sealants Fits Roloc style disc pad Sold by the disc or by the 0 or 100 pack (2 and 3 only) Max 2,000 RPM when used with holder (820.039) HEAVY DUTY SURFACE CONDITIONING DISCS Color Qty Per Box 2" Medium Maroon 821.9340 0 821.9340.100 2" Coarse Tan 821.9341 0 821.9341.100 2" X-Coarse Brown 821.9342 0 821.9342.100 3" Medium Maroon 821.9360 2 821.9360.100 3" Coarse Tan 821.9361 2 821.9361.100 100PK w/holder 3" X-Coarse Maroon 821.9362 2 821.9362.100 Heavy-Duty, Non-Woven abrasive High Cut Rate Long Lasting Fits Roloc style disc pad Sold by the disc or by 100 pack SCOTCHBRITE SURFACE CONDITIONING DISCS Color Qty Per Box 1 Coarse Brown 1393 *sold each 821.0393 1 Medium Maroon 1392 *sold each 821.0392 1 V Fine Blue 1391 *sold each 821.0391 2 Coarse Brown 07480 2 821.07480 2 Medium Maroon 07481 2 821.07481 2 V Fine Blue 071 2 821.071 2 S Fine Gray 0716 2 821.0716 3 Coarse Brown 0748 2 821.0748 3 Medium Maroon 07486 2 821.07486 3 V Fine Blue 0713 2 821.0713 3 S Fine Gray 0714 2 821.0714 4 Coarse Brown 07482 10 821.07482 4 Medium Maroon 07483 10 821.07483 4 V Fine Blue 0711 10 821.0711 4 S Fine Gray 0712 10 821.0712 Used to remove old gaskets, coatings and sealants Cleans molds, dies, fixtures and jigs Removes heavy scale and rust Fits Roloc style disc pad Sold by the box ROLOC STYLE DISC PAD ASSEMBLIES Dia. Shaft Brand 1 ¼ Dia - 820.0381 2 1/4 Dia. 820.039 820.0391 3 1/4 Dia 820.040 820.0401 4 1/4 Dia 820.041 820.0411 A Rubber back-up pad for use with RolocTM style quick change discs Winzer assembly comes complete with 2 steel shaft Brand assembly comes with 2 steel shaft and adapter Adapter fits sanders with 7/16-20 shaft STANDARD ABRASIVES Color 2 Coarse Brown 821.07220 3 Coarse Brown 821.07223 Preformed, 90 shape reaches into corners and inside intricate shapes Resists loading on softer metals Use for blending, deburring, and surface preparation Uses a Roloc style fastening system Note: Must use with EdgePro Disc Pad Assembly (sold separately) Sold by the disc -1-1
1 Surface Conditioning ABRASIVE SCOTCH-BRITE DISCS & SCUFF PADS SCOTCH-BRITE SURFACE CONDITIONING DISCS Color Discs Coarse Brown 7 x NH 1 0071 821.0071 Medium Maroon 7 x NH 1 0064 821.0064 Coarse Brown " x NH 10 84613 821.07468 Medium Maroon " x NH 10 8461 821.07469 Very Fine Blue " x NH 10 84616 821.07476 Coarse Brown 4 x NH 10 0740 821.0740 Medium Maroon 4 x NH 10 0741 821.0741 Coarse Brown 3 x NH 2 074 821.074 Medium Maroon 3 x NH 2 0746 821.0746 Coarse Brown 2 x NH 2 0743 821.0743 Medium Maroon 2 x NH 2 0747 821.0747 Made of non-woven fibre material impregnated with aluminum oxide mineral Ideal for cleaning light oxidation and removing gasketing residue from a wide variety of surfaces CCCC To be used with SCOTCH-BRITE Disc Pads SCOTCH-BRITE DISC PAD Hub/Shank For 7 Disc /8-11 Female 0940 821.0940 For 4 Disc 1/4 Shank 07492 821.07492 For Disc 1/4 Shank 41064 821.07467 For 3 Disc 1/4 Shank 07493 821.07493 For 2 Disc 1/4 Shank 07494 821.07494 Connects quickly and easily to any power tool Holds SCOTCH-BRITE Surface Conditioning Discs securely and safely through the use of SCOTCHMATE Dual Lock Fastening System SCUFF PADS Color Manufacturers Qty Per Box Aluminum Oxide Maroon #7447 20 821.07447 General Purpose Aluminum Oxide Carborundum Maroon 20 821.07441 General Purpose #10890 Silicone Carbide Gray #7448 20 821.07448 Ultra Fine Silicone Carbide Carborundum Gray 20 821.07442 Ultra Fine #10891 Carborundum Green General Purpose 20 821.07444 #10889 Non-Abrasive Standard Abrasive White 20 821.0744 Cleaning Pad #8272 Standard Aluminum Oxide Brown Abrasives 20 821.07449 Heavy-Duty #82710, Carborundum or standard abrasives available Non-woven nylon 6 x 9 pad Excellent conformability Use on metal, plastics, wood and composites Sold by the box ABRASIVE ARCSTRIP & CLEAN AND STRIP DISCS ARCSTRIP QUICK-LOK DISCS Description 2 disc 821.07000 3 disc 821.07010 2 disc holder 820.039 3 disc holder 820.040 Fits Roloc TM style disc holders Cleans welds, corrosion, rust and removes paints, coatings & sealants 2 and 3 diameter available SCOTCH-BRITE CLEAN N STRIP DISC STRIP DISCS Description 4 x /8 Strip Disc 821.07472 4-1/2 x 7/8 Strip Disc 821.07473 4-1/2 x /8-11 Strip Disc 821.07477 4 x 1/4 07460 821.07460 Ideal for cleaning and cutting through heavy rust, corrosion stains, scale, dirt, paint, adhesives and residue of old seals and gaskets Non-woven material has outstanding life that lasts up to 30% more than other materials Reniforced fiberglass backing to create a depressed center wheel for use with angle grinders Quickly removes contaminants exposing bare metal for panting, welding and other coatings Safer than wire brush because there are no dangerous edges or sharp bristles to cause injury Open mesh disc made from a tough abrasive impregnated material Perfect alternative to wire brushes for tough clean-up jobs Disc is used with wheel mandrel #821.07491 WHEEL MANDRELS FOR CLEAN N STRIP DISCS 1/4 x 2 07491 821.07491-1-2
Surface Conditioning 1 ABRASIVE BRITESTRIP & CLEAN AND STRIP DISCS (continued) ROLOC CLEAN N STRIP DISC 4 x 1/2 07466 821.07466 Constructed of a 3-dimensional durable web Perfect alternative to wire brushes for removing paint, rust and cleaning welds, etc. Use with roloc style holder (820.0411) STANDARD ABRASIVES BRITESTRIP PLUS DISC Description 3 Disc 821.0701 Designed for aggressive material removal Blue color Removes paints, varnishes, and sealants Cleans welds and removes corrosion and rust Use with roloc style holder (820.040) Maximum 8,00 RPM CLEAN AND STRIP XT 4 x 1/4 07471 821.07471 Strong and tough coated abrasive disc for long life New purple color Extra coarse for faster cutting Removes weld discoloration, scale, rust, paints and other coatings, gasket and sealing compounds, adhesives and epoxies Use with mandrel (821.07491) ROLOC + CLEAN AND STRIP XT 4 x 1/2 07470 821.07470 SCOTCH-BRITE ROLOC BRAKE HUB CLEANING DISC & HOLDER Description Brake Hub Cleaning Disc Holder 074 821.074 Scotch-Brite Roloc Brake Hub Cleaning Disc Scotch-Brite Roloc Brake Hub Cleaning Disc - Kit *** 0746 821.0746 0747 821.0747 Same features as above except uses Roloc + adapter (821.0700) Extremely tough 3 dimensional 821.074 web with non-metalic attachment system and disc pad holder 821.0746 Unique Roloc attachment system, Type H disc holder is designed to fit on a variety of tools with collets or chucks Removes rust and corrosion without excessive metal removal or gouging Ideal for use on right angle air tools Saves time, cleans the area fast while protecting the threads *** Kit contains Cleaning Discs and Cleaning Disc Holder ABRASIVE CROSS BUFFS & POLISHING DISCS STANDARD ABRASIVES HP BUFF & BLEND CROSS BUFFS Color 1-1/2 2 ply Medium Blue 821.0700 1-1/2 2 ply Very Fine Red 821.0720 3 mandrel 1/4 shank 821.070 Use to hone and polish the I.D. of lifter bores, valve bodies, and brake cylinders Clean and polish venturis of carburetors and exhaust ports of cylinder heads Polish round and square tubing, molds and dies Use with 3 x 1/4 x 8-32 mandrel STANDARD ABRASIVES LOCKIT FELT POLISHING DISCS 2 821.07700 3 821.07701 UNITIZED SILICON CARBIDE WHEELS SIZE 4-1/2X/8-11 2S FINE 821.0770 4-1/2X7/8 2S FINE 821.07706 Fits Roloc style disc pads For final finishing on aluminum, brass, and chrome when used with a metal polish Cool running Will not undercut or gouge workpiece Produces a bright, polished finish Unitized material on a firm, long lasting backing for use on right angle grinders. Easily works on large and small areas to clean, blend, surface finish,and polish. For metal, plastic and composite materials. Max RPM 11,000 ABRASIVE COMBINATION FLAP WHEELS STANDARD ABRASIVES BUFF & BLEND COMBI-WHEELS 3 x 2 x 1/4 shank 60 grit 821.076321 3 x 2 x 1/4 shank 80 grit 821.076322 3 x 2 x 1/4 shank 120 grit 821.076323 Constructed with alternating flaps of non-woven and coated abrasive material Provides a high rate of cut with a uniform scratch pattern Use for blending, cleaning and finishing on ferrous and non-ferrous metals -1-3
1 Surface Conditioning ABRASIVE ROLOC BRISTLE DISCS ROLOC BRISTLE DISC Diameter Color 1 Green Coarse - 0 0730 821.0730 1 Yellow Medium - 80 0731 821.0731 1 White Fine - 120 0732 821.0732 2 Green Coarse - 0 0724 821.0724 2 Yellow Medium - 80 072 821.072 2 White Fine - 120 0728 821.0728 3 Green Coarse - 0 0726 821.0726 3 Yellow Medium - 80 0727 821.0727 3 White Fine - 120 0729 821.0729 SCOTCH-BRITE ROLOC BODY MAN S BRISTLE DISC Diameter Color 2 Purple Coarse - 36 0736 821.0736 ROLOC DISC PAD ASSEMBLY Diameter 1 038 820.0381 2 039 820.0391 3 040 820.0401 Extra tough plastic bristle brush Sweeps away gasketing material and contamination while continually exposing fresh abrasive High Maximum Operating Speeds (MOS) allow for use on die grinders and pistol grip grinders (2 -MOS 2,000 RPM) (3 -MOS 18,000 RPM) Works with your Roloc Pad! Caution: Always wear protection for your eyes, face, hands, and body! ABRASIVE RADIAL BRISTLE DISCS ROLOC RADIAL BRISTLE DISC Diameter Color 3 Yellow 80 0743 821.24277 3 White 120 0744 821.24278 Rad ial p lasti c d is c wor ks with Ro lo c system Clean channels or hard-to-reach areas Leaves a satin finish Maximum operating speed of 2,000 RPM allows for use on high speed die grinders 990 MANDREL 821.1012 Designed for use with the 3 x 3/8 Radial Bristle Discs Allows stacking of one to four discs RADIAL BRISTLE DISC Diameter Color 3 Green 0 0742 821.0742 3 Yellow 80 0743 821.0743 3 White 120 0744 821.0744 3 diameter x 3/8 center hole Unique bristle pattern reaches tight or awkward areas such as grooves and along 90 angles Flexible bristles conform to the part and clean without damaging the base material Higher cut rate than wire brushes for faster more uniform finish Maximum Operating Speed of 2,000 RPM allows for use on high speed die grinders Applications: removes adhesives, paint, oxidation and other coatings, clean and prepare surfaces before and after welding, remove gasket materials from recessed areas, remove o-ring residue BRUSHES WIRE WHEELS & BRUSHES KNOT TYPE WIRE BRUSHES Description Dia. x Wire Arbor Hole Max. Safe Face Free Speed Width (RPM) Stringer Bead Twist 4 x.020 /8-11 3/16 20,000 68.13131 Standard Twist 4 x.020 /8-11 3/8 20,000 68.13130 Standard Twist 6 x.014 1/2 or /8* 1/2 9,000 68.0808 Standard Twist 6 x.02 /8-11 /8 9,000 68.08090 Standard Twist 7 x.014 1/2 or /8* /8 9,000 68.0883 Standard Twist 8 x.014 1/2 or /8* /8 6,000 68.0813 Heat treated high carbon steel wire No vibration during use Longer brush life Made in U.S.A. * Features plastic snap-out arbor hole adapter. -1-4
Surface Conditioning 1 BRUSHES WIRE WHEELS & BRUSHES (continued) END BRUSHES Description Conflex with Encapsulated Wire 3 x.0118 20,000 68.331 Knot Wire Wheel 3 x.014 2,000 68.17681 Permanently mounted on 1/4 steel stems Perfectly balanced for vibration-free running High RPM ratings Made in U.S.A. ***Has 1/8 stem Dia. x Wire Max. Safe Free Speed (RPM) 10 Pack Miniature Brass End Brush*** 3/16 x.003 2,000 68.1.10001 Solid End 1/2 x.006 2,000 68.10002 Solid End 1/2 x.014 2,000 68.10003 68.10003.1 Solid End 1/2 x.020 2,000 68.10004 68.10004.1 Solid End 3/4 x.014 22,000 68.10007 68.10007.1 Solid End 3/4 x.020 22000 68.10008 68.10008.1 Solid End 1 x.014 22,000 68.10011 68.10011.1 Solid End 1 x.020 20,000 68.10012 68.10012.1 Knot Type 3/4 x.014 22,000 68.1002 68.1002.1 Knot Type 3/4 x.020 22,000 68.10026 68.10026.1 Knot Type 1 x.014 20,000 68.10027 68.10027.1 Knot Type 1-1/8 x.020 20,000 68.10028 68.10028.1 Circular Flared 1-1/2 x.008 20,000 68.10037 Circular Flared 1-1/2 x.020 20,000 68.10038 Crimped Wired Cup 1-1/4 x.014 13,000 68.14300 Crimped Wired Cup 1-1/4 x.020 13,000 68.14301 Crimped Wired Cup 1-3/4 x.012 13,000 68.14302 Crimped Wired Cup 2 x.012 13,000 68.14303 Circular Flared Stainless Steel Wire 2 x.008 20,000 68.0471 Conflex-Wide Face 1-1/4 x.0118 20,000 68.17601 Conflex-broad Face Crimped Wire Wheel 1-1/2 x.0118 20,000 68.17604 Crimped Wire Wheel 1-3/4 x.0118 20,000 68.1760 Conflex-Narrow Face Crimped Wire Wheel 2 x.0118 20,000 68.17610 Conflex-Narrow Face Crimped Wire Wheel 2-1/2 x.014 20,000 68.17614 Conflex-Narrow Face Crimped Wire Wheel 3 x.008 20,000 68.1761 Conflex-Narrow Face Crimped Wire Wheel 3 x.014 20,000 68.090 Conflex-Narrow Face Crimped Wire Wheel 3 x.0118 20,000 68.17616 Conflex-Narrow Face SS Crimp Wire Wheel 3 x.014 20,000 68.17618 Knot Type Circular Flare Solid End Crimp Wire Cup Knot Wire Wheel Conflex Conflex Encapsulated CRIMPED WIRE WHEEL BRUSHES FOR BENCH GRINDING Description Dia. x Wire Arbor Hole Face Width Max. Safe Free Speed (RPM) 10 Pack Narrow Face 4 x.0118 3/8 or 1/2* 1/2 6000 68.00134 68.00134.1 Narrow Face 4 x.014 /8-11 1/2 1,000 68.0100 Narrow Face Med. Face Wide Face 6 x.014 8 x.014 6 x.008 6 x.014 8 x.014 7 x.014 8 x.014 /8-1/2 /8-1/2 2** 2** 2** 2** 2** 1/2 1/2 1 1 1 1-1/4 1-3/8 6000 6000 6000 6000 4000 6000 4000 68.0107 68.0117 68.0600 68.06080 68.06120 68.03100 68.0310 Narrow Face Heat treated high carbon steel wire Well balanced for low vibration and long life Wide Face For bench grinders Made in U.S.A. ** For other available arbor holes, see Metal Arbor Adapter Table below. If a different arbor hole size is required other than the standard 2 size, consult the Metal Adapter Table below for the appropriate adapter. Order the adapter separately from the brush. Metal adapters are used in pairs and sold per pair. Medium Face -1-
1 Surface Conditioning BRUSHES WIRE WHEELS & BRUSHES (continued) METAL ARBOR ADAPTER TABLE Arbor Adapter 2 to 1/2 68.03809 2 to /8 68.03810 2 to 3/4 68.03811 2 to 1 68.03812 CUP BRUSHES Dia. x Wire Arbor Hole Max RPM 2-3/4 x.014 /8-11 14000 68.1302 2-3/4 x.020 /8-11 14000 68.13286 2-3/4 x.020 M10 x 1.2 14000 68.13287 3-1/2 x.020 /8-11 1200 68.1316 4 x.023 /8-11 9000 68.12316 6 x.023 /8-11 6000 68.12376 Knot Type - Single Row ARBOR ADAPTERS Adapter /8-11 to M10 x 1.2 68.07771 /8-11 to 3/8-16 68.07769 The fixed /8-11 threaded arbor hole of each cup-brush can be adapted to M-10 x 1.2, M-10 x 1.0 or 3/8-16 by using a reducing adapter. Dia. x Wire Arbor Hole Max RPM 2-3/4 x.014 /8-11 14000 68.1324 3-1/2 x.014 /8-11 1200 68.13181 4 x.020 /8-11 9000 68.14036 6 x.020 /8-11 6000 68.14076 Heat treated high carbon steel For right-angle grinders Made in U.S.A. Crimp Wire BRUSHES NYLON CUP Brush Diameter Thread Filament Diameter 4 /8-11.040 6 /8-11.040 Filament Material Nylon/Silicon Carbide Nylon/Silicon Carbide Grit Trim Length Max RPM 80 1-1/2 6,000 68.83813 80 1-1/2,000 68.83821 BRUSHES TUBE BRUSHES TUBE BRUSHES Brush Wire Brush Stem Overall Diameter Length Diameter Length 1/4.003 1-1/2 3/32 7 68.21092 3/8.004 2 1/8 8 68.21094 1/2.004 2 1/8 8 68.21096 Single stem, single spiral Eye handle for manual cleaning operations Carbon steel bristles POWER TUBE BRUSHES Brush Wire Brush Stem Overall Diameter Length Diameter Length 1/2.006 1/2 /32 68.21107 3/4.008 2-1/2 1/4-1/2 68.21247 1.0104 2-1/2 1/4-1/2 68.2111 Double stem, Double spiral Use with power tools for heavy-duty cleaning and deburring Carbon steel bristles -1-6
Coated Abrasives 2 ABRASIVE ROLOC DISCS POWER-GRIT QUICK-CHANGE DISCS Qty Per Box 2 24 100 820.013980 2 36 100 820.013970 2 0 100 820.013960 2 60 100 820.0139 2 80 100 820.01390 2 120 100 820.013940 3 24 0 820.014080 3 36 0 820.014070 3 0 0 820.014060 3 60 0 820.0140 3 80 0 820.01400 3 120 0 820.014040 Fits RolocTM style disc holder Longer life and higher cut rate than both Green Corps and Norton Norzon in head-to-head testing Cool running, resists loading Zirconia Alumina Green color Sold by the disc PREDATOR QUICK-LOK DISCS Qty Per Box 2 36 100 820.014081 2 60 100 820.014082 2 80 100 820.014083 2 120 100 820.014084 3 36 0 820.01408 3 60 0 820.014086 3 80 0 820.014087 3 120 0 820.014088 4 120 2 820.014093 Industry exclusive grain mixture works great on mild steel, stainless steel and even exotics at a fraction of the costs of competitors ceramic products. Used for weld removal and surface finishing Long lasting, fast and cool cutting, load resistant Yellow color Sold by the disc 777F/78C COATED ROLOC DISCS Qty Per Box 1 0 0 820.01002* 1 60 0 820.01003* 1 80 0 820.01004* 1 100 0 820.0100* 1 120 0 820.01007* 2 36 0 820.01010 2 0 0 820.01011 2 60 0 820.01012 2 80 0 820.01013 2 100 0 820.01014 2 120 0 820.0101 2 180 0 820.01017* 2 240 0 820.01018* 3 36 0 820.01019 3 0 0 820.01020 3 60 0 820.01021 3 80 0 820.01022 3 100 0 820.01023 3 120 0 820.01024 3 240 0 820.0102* 4 36 2 820.01026 4 0 2 820.01027 4 60 2 820.01028 4 80 2 820.01029 4 100 2 820.01030 4 120 2 820.01031 777F/78C incorporates Cubitron Abrasive Grain for long life & fast cutting Highly suited for stainless steel, nickel alloy & other ferrous metals Constructed on a YF weight, water resistant polyester cloth backing Resin bonded for heat resistance. Features grinding aid for cooler grinding. Can be run wet or dry. Fits Roloc style disc holder Sold by disc * 361F Fine grain general purpose discs for grinding, blending & deburring on all metals GREEN CORPS QUICK-CHANGE DISCS Qty Per Box 2 24 01398 2 820.01398 2 36 01397 2 820.01397 2 0 01396 2 820.01396 3 24 01408 2 820.01408 3 36 01407 2 820.01407 3 0 01406 2 820.01406 Fits RolocTM style disc holder Fast cutting and long lasting Use for general purpose sanding and grinding Green color Sold by the box ROLOC BRAKE ROTOR SURFACING DISCS Description 3 120 grit 01411 821.01411 Premium 120 grit ROLOC disc designed for use on brake rotor surfaces after turning Reduces customer come-backs due to brake squeal and other repair related conditions Package includes 12 ROLOC Brake Surfacing Discs Adapter fits sanders with 7/16-20 shaft ROLOC STYLE DISC PAD ASSEMBLIES Dia. Shaft Brand 1 ¼ Dia 820.0381 2 1/4 Dia. 820.039 820.0391 3 1/4 Dia 820.040 820.0401 4 1/4 Dia 820.041 820.0411 A Rubber back-up pad for use with RolocTM style quick change discs Winzer assembly comes complete with 2 steel shaft Brand assembly comes with 2 steel shaft and adapter -2-1
2 Coated Abrasives ABRASIVE SOCATT STYLE DISCS SOCATT STYLE QUICK CHANGE DISCS SOCATT STYLE DISC PAD ASSEMBLY Description Socatt Disc Pad Assy 2 820.013802 Socatt Disc Pad Assy 3 820.013803 A hard rubber back-up pad for use with Socatt style quick change discs Pad assemblies come complete with a ¼ x 2 mandrel 2 36 820.013810 2 60 820.013813 2 80 820.013814 2 120 820.013816 3 24 820.013819 3 36 820.013820 3 60 820.013823 3 80 820.013824 3 120 820.013826 Fits Socatt style disc pad Aluminum oxide 2 ply discs Color: Brown Ideal for flat or contour surfaces Use For: general purpose grinding, deburring, and blending on ferrous metals Discs are sold individually ABRASIVE CLOTH SCREENCLOTH Grit 320 886.473 220 886.474 180 886.47 120 886.480 80 886.48 Sharp silicon carbide grain is coated on both sides of open mesh waterproof nylon fabric Open mesh construction is ideal where loading is a problem Can be used wet or dry Great for softer materials such as brass, plaster and copper Both sides of the cloth can be used 1-1/2 x 2 yard rolls Grit 10 886.490 4 x 2 yard rolls EMERY CLOTH Sheets Grit Fine 120 9 x 11 886.08 Medium 80 9 x 11 886.090 Coarse 0 9 x 11 886.09 Rolls Grit Fine 120 1-1/2 x 0 yds 886.080 Medium 100 1-1/2 x 0 yds 886.081 Coarse 0 1-1/2 x 0yds 886.082 For rust removal General purpose sanding of metal surfaces SCREENCLOTH ROLL ASSORTMENT Screencloth Refill Rolls Grit 180 886.468 120 886.469 80 886.470 Handy dispenser box lets you quickly tear off just the amount you need Comes with three grits: 180, 120, 80 1-1/2 x 10 yard rolls ALUMINUM OXIDE CLOTH ROLL ASSORTMENT Refill Rolls 1-1/2 x 10 yds. Grit 10-J 886.17 120-J 886.180 80-J 886.18 Handy Dispenser Box of three 1-1/2 x 10 yard Rolls Three Different Grits (80, 120, 10) Per Box SUPER BLUE COMBO PACK 886.9218 Convenient Dispenser Box 1-1/2 X 10 yrd 80 Grit 1-1/2 X 10 yrd 120 Grit 1-1/2 X 10 yrd 10 Grit 886.9219 Convenient Dispenser Box 1-1/2 X 10 yrd 180 Grit 1-1/2 X 10 yrd 240 Grit 1-1/2 X 10 yrd 320 Grit 886.003 886.001 ALUMINUM OXIDE CLOTH ROLLS Grit 1 x0 yds. 1-1/2 x20 yds. 1-1/2 x0 yds. 2 x0 yds. 00-J 886.10 886.3014 400-J 886.110 886.210 886.3010 886.410 320-J 886.11 886.21 886.3011 886.41 240-J 886.120 886.220 886.30117 886.420 220-J 886.30118 180-J 886.12 886.22 886.30119 886.42 10-J 886.128 886.30120 886.428 120-J 886.130 886.230 886.30121 886.430 80-J 886.13 886.23 886.3019 886.43 60-J 886.14 886.24 886.30162 886.440 Deburrs and cleans metal parts Soft flexible J weight backing Convenient dispenser box ALUMINUM OXIDE WET CUT CLOTH ROLLS (SUPER BLUE) Grit Roll Length Yards 320-J 1-1/2 x 20 yds. 886.9312 240-J 1-1/2 x 20 yds. 886.9314 180-J 1-1/2 x 20 yds. 886.9316 10-J 1-1/2 x 20 yds. 886.9317 120-J 1-1/2 x 20 yds. 886.9318 60-J 1-1/2 x 20 yds. 886.9319 80-J 1-1/2 x 20 yds. 886.9320 Super Blue from ShopPro is a new aluminum oxide abrasive cloth that is 100% impervious to bonding degradation by water, cutting oils, grease chemicals and other solvents. Available in dispensing rolls Super Blue is ideal for deburring, cleaning and polishing metal parts exposed to fluids. It will not load or shed from exposure to solvents making it the most cost-effective finishing cloth available for industrial and automative applications. -2-2
Coated Abrasives 2 ABRASIVE CLOTH (continued) CROCUS CLOTH ROLL 886.00 Roll - 1-1/2 x 20 yards CROCUS CLOTH 886.01 Sheets - 9 x 11, 0 sheets For fine polishing of metal surfaces ALUMINUM OXIDE CLOTH SHEETS Sheet Grit 80 9 x 11 898.1070 120 9 x 11 898.1072 180 9 x 11 898.1074 240 9 x 11 898.1076 Use for deburring and cleaning metal surfaces Flexible J weight cloth backing Sold 0 sheets per pack ABRASIVE PSA DISCS PREMIER ALUMINUM OXIDE DRI-LUBE RESIN PAPER STICK-ON Sheets P600 6 100 898.18163 P400 6 100 898.18164 P180 6 100 898.18169 P80 6 100 898.18173 Premium P-graded heattreated aluminum oxide abrasive New, red-colored B-weight paper backing Link disc roll design (LDR) PSA backing New 4-pack with polybags Ultimate choice for feathering paints, primers and body fillers. 30% to 0% faster cut rate than other discs Superior resistance to delamination and tearing GOLD ALUMINUM OXIDE DRI-LUBE RESIN PAPER STICK-ON Discs P320 100 898.1046 P220 100 898.1049 P180 100 898.100 P120 100 898.103 P80 100 898.10 P320 6 100 898.108 P220 6 100 898.1061 P180 6 100 898.1062 P120 6 100 898.106 P100 6 100 898.1066 P80 6 100 898.1067 Features Benefits Premium P-graded aluminum oxide abrasive Special undyed stearate oversize Durable C-weight backing PSA backing Link disc roll (LDR) Fast cut long life No pigment transfer Excellent tear resistance High tear resistance Easy application and removal Easy dispensing No release paper waste PREMIUM WHITE STEARATE AO DISC ROLLS Discs Per Roll 400 " 12 898.104.1 320 " 12 898.1046.1 220 " 12 898.1049.1 180 " 12 898.100.1 120 " 12 898.103.1 80 " 12 898.10.1 320 6" 12 898.108.1 220 6" 12 898.1061.1 180 6" 12 898.1062.1 120 6" 12 898.106.1 100 6" 12 898.1066.1 80 6" 12 898.1067.1 Non-loading stearated material PSA on backing with no release paper Applications Ideal for finishing wood, metal, fiberglass and plastics Designed to fit dual action and orbital sanders Cabinet shops and boating manufacturers HOOK & LOOP DISC Grit " 80 898.34906 " 100 898.34907 " 120 898.34908 " 10 898.34909 " 180 898.34910 " 220 898.34911 " 240 898.34912 " 320 898.34914 " 400 898.3491 " 600 898.34917 6" 80 898.349606 6" 100 898.349607 6" 120 898.349608 6" 10 898.349609 6" 180 898.349610 6" 220 898.349611 6" 240 898.349612 6" 320 898.349614 6" 400 898.34961 6" 600 898.349617 The Shop Pro Disc cuts costs with increased performance. Shop Pro H&L products are semi-open, stearated B-weight PSA discs. High Quality abrasive grains, grinding aids and backings are used to create a cost effective and superior product with outstanding performance. STIKIT GOLD DISC ROLLS 6 Diameter 7 Discs per Roll 400A 01203 820.01203 320A 0120 820.0120 220A 01208 820.01208 180A 01209 820.01209 80A 01213 820.01213 Durable and long lasting Come in roll form in a full range of grades Pressure-sensitive adhesive for easy application and removal PSA DISC ROLL Grit " 80 898.34918 " 100 898.34919 " 120 898.34920 " 10 898.34921 " 180 898.34922 " 220 898.34923 " 240 898.34924 " 320 898.3492 " 400 898.34926 " 600 898.34927 6" 80 898.349618 6" 100 898.349619 6" 120 898.349620 6" 10 898.349621 6" 180 898.349622 6" 220 898.349623 6" 240 898.349624 6" 320 898.34962 6" 400 898.349626 6" 600 898.349627 The Shop Pro Disc cuts costs with increased performance High quality abrasives grains, grinding aids and backings are used to create a cost effective and superior products with outstanding performance 100 per roll -2-3
2 Coated Abrasives ABRASIVE PSA DISCS(continued) NORTON GOLD A290 DISC 100 DISCS PER ROLL Grit 6" P60 898.1070 6" P80 898.1071 6" P180 898.1072 P graded premium A/O grain Strong paper backing Water-based stearate to resists loading Produces a quick, cool cut Produces a more consistent pattern RED ZIRCONIA ALUMINUM RESIN PAPER STICK-ON Discs P36 6 0 898.10609 Features Benefits Zirconia abrasive E-weight paper backing Resin bond PSA backing Fast cut, long life Increased strength and durability Reduced loading and reduced edge wear Easy application and removal ABRASIVE AUTOBODY & BODY FILE SHEETS PREMIER RED ZIRCONIA ALUMINA RESIN PAPER STICK-ON Strips 80 0 898.10914 36 0 898.10916 Features Zirconia alumina abrasive E-weight paper backing Resin bond PSA backing Benefits Fast cut, long life Increased strength and durability Reduced loading and edge wear Easy application and removal 2-3/4 x 16-1/2 ALUMINUM OXIDE PAPER Strips P80 100 898.1092 Features P-graded brown aluminum oxide abrasive D-weight paper backing Open coat Benefits Tough and durable Reduced loading BIGRED ZIRCONIA ALUMINA RESIN PAPER Strips 80 0 898.10910 36 0 898.10912 Features Zirconia alumina abrasive E-weight paper backing Resin bond Benefits Fast cut, long life Increased strength and durability Reduced loading and edge wear 2-3/4 x 17-1/2 GOLD ALUMINUM OXIDE DRI-LUBE RESIN PAPER Strips P180 0 898.10898 Features P-graded light brown aluminum oxide abrasive C-weight paper backing Special undyed stearate oversize Benefits Fast aggressive cut and long life Durability plus tear resistance Excellent load resistance No pigment transfer 2-3/4 x 17-1/2-2-4
Coated Abrasives 2 ABRASIVE ROLLS PSA GOLD ROLL 2-3/4 Wide Stick-On Sheet Rolls Grading Yards per roll P80 2 898.10238 P120 30 898.10239 P220 4 898.10242 Benefits Superior cut and consistent finish Excellent tear resistance No pigment transfer Superior load resistance Convenience Easy application and removal ABRASIVE WET OR DRY SILICON CARBIDE WATERPROOF PAPER Sheets 600 9 x 11 100 898.10783 400 9 x 11 100 898.10787 320 9 x 11 100 898.10789 220 9 x 11 100 898.10792 Sheets 180 9 x 11 100 898.10793 80 9 x 11 100 898.10797 Features Silicon Carbide abrasive Resin bond Flexible waterproof paper backing Benefits Ideal finish sanding Excellent grain adhesion Strength and resistance to deterioration when used wet WATERPROOF SILICON PAPER 9X11 Sheets Sheets Sheets 60 9x11 0 820.60 220 9x11 0 820.220 00 9x11 0 820.00 80 9x11 0 820.80 240 9x11 0 820.240 600 9x11 0 820.600 100 9x11 0 820.100 280 9x11 0 820.280 1000 9x11 0 820.1000 120 9x11 0 820.120 320 9x11 0 820.320 1200 9x11 0 820.1200 10 9x11 0 820.10 360 9x11 0 820.360 100 9x11 0 820.100 180 9x11 0 820.180 400 9x11 0 820.400 2000 9x11 0 820.2000 Silicon carbide abrasive for fast cutting and finishing surfaces made of plastic, rubber, fiberglass and composite materials Strong, waterproof C-weight backing for aggressive cutting action Waterproof A-weight backing for superior finishing qualities when used with liquids IMPERIAL WETORDRY PAPER SHEETS Sheets per Sleeve P600 9 x 11 0 01131-02036 820.02036 P400 9 x 11 0 01131-02038 820.02038 P360 9 x 11 0 01131-02039 820.02039 P320 9 x 11 0 01131-02040 820.02040 P220 9 x 11 0 01131-02043 820.02043 Features Premium, aluminum oxide mineral Improved paper backing Optimized construction Advantages: Improved rate of cut, increased abrasivelife, increased flexibility and uniform consistent finish SILICON CARBIDE DRI-LUBE PAPER Sheets 80 9 x 11 0 898.10819 Features Silicon carbide abrasive Heavy B or C-weight paper Benefits Sharp cut, excellent finish Strength, increased edge durability and tear resistance -2-
2 Coated Abrasives ABRASIVE RESIN FIBRE DISCS ALUMINUM OXIDE RESIN FIBRE DISC Arbor Discs RPM Dia Hole 1,300 4 /8 36 2 898.1066 1,300 4 /8 60 2 898.1068 1,300 4 /8 80 2 898.1069 1,300 4 /8 100 2 898.10622 1,300 4 /8 120 2 898.10623 13,300 4-1/2 7/8 60 2 898.10664 13,300 4-1/2 7/8 80 2 898.1066 13,300 4-1/2 7/8 100 2 898.10626 13,300 4-1/2 7/8 120 2 898.10627 12,200 7/8 24 2 898.10683 12,200 7/8 36 2 898.10682 12,200 7/8 0 2 898.1067 12,200 7/8 80 2 898.10629 12,200 7/8 100 2 898.10674 12,200 7/8 120 2 898.10630 12,200 7 7/8 16 20 898.10691 8,600 7 7/8 24 2 898.10692 8,600 7 7/8 36 2 898.10693 8,600 7 7/8 80 2 898.10696 8,600 7 7/8 100 2 898.10632 Rubber backup pad required ALUMINA ZIRCONIA RESIN FIBRE DISC Dia Arbor Hole 7/8 24 898.10701 7 7/8 24 898.10710 7 7/8 36 898.10700 Features Tough alumina zirconia abrasive Resin bond Heavy fibre backing Benefits High performance disc with a fast cut rate Tough, self sharpening grain Cool grinding action reduces glazing and loading PRESSURE SENSITIVE DISCS Grit 0 12 898.01.120 80 12 898.01.1280 Large, industrial size Coating smoothly and evenly applied Withstands the heat generated when a disc is in use against the work piece ABRASIVE BACK-UP PADS BACK-UP PAD FOR VELCRO DISCS 6x/16-24 898.1202 x/16"-24 898.12026 Hook & Loop fastening system for clean application and removal BACK-UP PAD FOR STICK-ON DISCS 898.12022 Vinyl-faced pad for use with Stick-On discs 6 x /16-24 BACK-UP PAD FOR RESIN FIBRE DISCS 4-1/2 x /8-11 Center Nut 898.1060 x /8-11 Center Nut 898.1061 7 x /8-11 Center Nut 898.1062 Reusable Tough, long lasting construction Spiral face runs cooler ABRASIVE TRIM-KUT DISCS TRIM-KUT DISC Diameter Backing Grit Max RPM 3 White Print 24 21.000 886.31800 3 Red Print 36 21.000 886.31801 3 Orange Print 60 21.000 886.31802 3 Green Print 120 21.000 886.31803 Red Print 36 12.000 886.31809 Durable copolymer backing is impregnated with a tough aluminum oxide abrasive grain No need for a back-up pad! Unique self-trimming design Easy contour grinding 886.31804 1/4 shank for Trim-Kut Discs TRIMMING INSTRUCTIONS When abrading with Trim-Kut, the outer surface of the disc is normally the first to become dull and lose its cutting action. To maximize the value of Trim-Kut, the dulled periphery may be trimmed off by the following unique method. Be sure to adhere to all instructions regarding personal protective equipment and equipment precaution requirements when trimming a disc. Operate the grinder with the back surface of the disc inclined approximately -1 against a secured piece of scrap metal or ceramic. By exerting a slight amount of pressure (towards the operator) the custom thermoplastic material will dress down to the desired new diameter. High RPM and a sharp edge of scrap will result in quicker trimming action. Disc may also be trimmed using a scribe or sheers. -2-6
Coated Abrasives 2 ABRASIVE FLAP DISCS FLAP DISC Grit T27 Type 27 20 Pack T29 Type 29 20 Pack 4 x /8 36 68.27.100 68.27.100.1 68.29.100 68.29.100.1 4 x /8 60 68.27.101 68.27.101.1 68.29.101 68.29.101.1 4 x /8 80 68.27.102 68.27.102.1 68.29.102 68.29.102.1 4 x /8 120 68.27.103 68.27.103.1 68.29.103 68.29.103.1 4-1/2 x /8-11 36 68.27.104 68.27.104.1 68.29.104 68.29.104.1 4-1/2 x /8-11 40 68.27.10 68.27.10.1 68.29.10 68.29.10.1 4-1/2 x /8-11 60 68.27.106 68.27.106.1 68.29.106 68.29.106.1 4-1/2 x /8-11 80 68.27.107 68.27.107.1 68.29.107 68.29.107.1 4-1/2 x /8-11 120 68.27.108 68.27.108.1 68.29.108 68.29.108.1 4-1/2 x /8-11 XL 40 68.27.109 68.27.109.1 68.29.109 68.29.109.1 4-1/2 x /8-11 XL 60 68.27.110 68.27.110.1 68.29.110 68.29.110.1 4-1/2 x /8-11 XL 80 68.27.111 68.27.111.1 68.29.111 68.29.111.1 4-1/2 x /8-11 XL 120 68.27.112 68.27.112.1 68.29.112 68.29.112.1 4-1/2 x 7/8 36 68.27.113 68.27.113.1 68.29.113 68.29.113.1 4-1/2 x 7/8 40 68.27.114 68.27.114.1 68.29.114 68.29.114.1 4-1/2 x 7/8 60 68.27.11 68.27.11.1 68.29.11 68.29.11.1 4-1/2 x 7/8 80 68.27.116 68.27.116.1 68.29.116 68.29.116.1 4-1/2 x 7/8 120 68.27.117 68.27.117.1 68.29.117 68.29.117.1 4-1/2 x 7/8 XL 40 68.27.118 68.27.118.1 68.29.118 68.29.118.1 4-1/2 x 7/8 XL 60 68.27.119 68.27.119.1 68.29.119 68.29.119.1 4-1/2 x 7/8 XL 80 68.27.120 68.27.120.1 68.29.120 68.29.120.1 4-1/2 x 7/8 XL 120 68.27.121 68.27.121.1 68.29.121 68.29.121.1 7 x /8-11 36 68.27.122 68.27.122.1 68.29.122 68.29.122.1 7 x /8-11 60 68.27.123 68.27.123.1 68.29.123 68.29.123.1 7 x /8-11 80 68.27.124 68.27.124.1 68.29.124 68.29.124.1 7 x /8-11 120 68.27.12 68.27.12.1 68.29.12 68.29.12.1 Type 27 Type 29 Premium grain for heavy duty applications and longer working life. Contains an active grinding agent for cool cutting. Contaminant-free results; stainless steel won t rust. Active grinding agent provides cool cutting with light pressure Special optimized resin bond offers maximum cutting capacity, strong edge stability and long life Premium Zirconia Alumina grain with a poly/cotton heat treated backing. MADE IN USA TRIMMABLE ABRASIVE FLAP DISC ZIRCONIA GRAIN Grit Type 27 4-1/2 x /8-11 40 68.1.00 4-1/2 x /8-11 60 68.1.01 4-1/2 x /8-11 80 68.1.02 6 x /8-11 40 68.1.03 6 x /8-11 60 68.1.04 6 x /8-11 80 68.1.0 Trimmable Zirconia flap disc backing easily trims down to expose flaps for extended working life and allows more of the flap disc to be used for fewer disc change Premium Zirconia Alumina grain with a poly/cotton heat treated backing provides low stretch and strengh for the high Zirconia concentration. Recommended for aggressive use and heavy duty applications To trim down the backing simply grind the backing edge against a metal edge until the flaps are exposed to the level needed Contaminate-free. PREMIUM CERAMIC ABRASIVE FLAP DISCS Grit 4-1/2 x 7/8 40 68.6261 4-1/2 x 7/8 60 68.6263 4-1/2 x /8-11 40 68.6267 4-1/2 x /8-11 60 68.62677 Continuous maximum performance thanks to permanent self-sharpening action of the ceramic grain Unsurpassed stock removal, very long service life and exceptional cost-efficiency Particulary cool grinding action on low heat conducting materials -2-7
2 Coated Abrasives ABRASIVE FLAP DISCS (continued) ABRASIVE FLAP DISC PREMIUM ZIRCONIA ALUMINA GRAIN Grit Type 29 Bulk Pack Qty. Bulk Pack Type 29 Type 27 Bulk Pack Qty. Bulk Pack Type 27 4 x /8 36 68.002 20 68.002.1 4 x /8 60 68.004 20 68.004.1 4 x /8 80 68.00 20 68.00.1 4-1/2 x /8-11 36 68.022 20 68.022.1 4-1/2 x /8-11 40 68.0637 10 68.0637.1 4-1/2 x /8-11 60 68.024 20 68.024.1 68.0638 10 68.0638.1 4-1/2 x /8-11 80 68.02 20 68.02.1 68.0639 10 4-1/2 x /8-11 120 68.026 20 68.026.1 68.0640 10 68.0640.1 4-1/2 x /8-11 XL 40 68.029 20 68.029.1 4-1/2 x /8-11 XL 60 68.030 20 68.030.1 4-1/2 x /8-11 XL 80 68.031 20 68.031.1 4-1/2 x /8-11 XL 120 68.032 20 68.032.1 4-1/2 x 7/8 36 68.012 20 68.0641 10 68.0641.1 4-1/2 x 7/8 40 68.0642 10 68.0642.1 4-1/2 x 7/8 60 68.014 20 68.014.1 68.0643 10 68.0643.1 4-1/2 x 7/8 80 68.01 20 68.01.1 68.0644 10 68.0644.1 4-1/2 x 7/8 120 68.016 20 68.016.1 68.064 10 68.064.1 4-1/2 x 7/8 XL 40 68.033 20 68.033.1 68.0646 10 68.0646.1 4-1/2 x 7/8 XL 60 68.034 20 68.034.1 68.0647 10 68.0647.1 4-1/2 x 7/8 XL 80 68.03 20 68.03.1 68.0648 10 68.0648.1 x /8-11 40 68.040 68.0649 10 68.0649.1 7 x /8-11 36 68.0632 20 68.0632.1 7 x /8-11 60 68.0634 20 68.0634.1 7 x /8-11 80 68.063 20 68.063.1 7 x /8-11 120 68.0636 20 68.0636.1 7 x 7/8 36 68.0622 10 68.0622.1 68.060 10 68.060.1 7 x 7/8 40 68.0623 10 68.0623.1 68.061 10 68.061.1 7 x 7/8 60 68.0624 10 68.0624.1 7 x 7/8 80 68.062 10 68.062.1 68.062 10 68.062.1 7 x 7/8 120 68.0626 10 68.0626.1 Type 27 Type 29 Fastest grain removal in the marketplace for carbon based steels, 26% more than the competition Recommended for aggressive use and heavy duty applications. Active grinding agent provides cool cutting with light pressure. Special optimized resin bond offers maximum cutting capacity, strong edge stability and long life. Premium Zirconia Alumina grain with a poly/cotton heat treated backing. The poly/cotton combination provides low stretch for the Zirconia concentration that Z3 contains. Made in USA PREMIUM CERAMIC ABRASIVE FLAP DISCS Grit 4-1/2" x 7/8" 36 68.036 4-1/2" x 7/8" 40 68.037 4-1/2" x 7/8" 60 68.038 4-1/2" x 7/8" 80 68.039 4-1/2" x 7/8" XL 36 68.060 4-1/2" x 7/8" XL 40 68.061 4-1/2"x 7/8" XL 60 68.062 4-1/2" x 7/8" XL 80 68.063 4-1/2" x /8-11 36 68.041 4-1/2" x /8-11 40 68.042 4-1/2" x /8-11 60 68.043 4-1/2" x /8-11 80 68.044 Self-sharpening ceramic grain and cool grinding aid for fast, aggressive cutting action on hard-to-grind materials. Polyester backing material for longer working life C3 Ceramic grain provides Contaminate-Free results; stainless steel won t rust. Hybrid Compact design (4-1/2 and ) - Flap are compressed and compacted at a 4 degree for edge and strenth. ZIRCONIUM CURVE FLAP DISCS FOR GRINDING OF FILLET WELDS Thickess Grit 4-1/2 x /8-11 9/16 40 68.67214 4-1/2 x /8-11 /8 40 68.6721 x /8-11 9/16 40 68.67216 x /8-11 /8 40 68.67363 Unique design allows for grinding with not only the bottom and edge of disc, but also with the top edge of disc. Specifically designed to provide fast, aggressive grinding with a very high removal rate and excellent tool life. Designed to be used on steel and stainless steel. Applications include fillet weld grinding, deburring, chamfering and all grinding operations on concave and convex contours. PREDATOR FLAP DISC Grit 6" X 7/8" 40 68.040 6" X 7/8" 60 68.060 6" X 7/8" 80 68.080 The proprietary grain mix of our PREDATOR Flap Discs will provide much faster material removal and two-to-three times the life when compared to standard Zirconia Flap Discs. PREDATOR is well suited for all mild steel, high alloy, nickel alloy and stainless steel. QUICK CHANGE MINI FLAP DISCS 2 Diameter 3 Diameter 40 68.42040 40 68.43040 60 68.42060 60 68.43060 80 68.42080 80 68.43080 120 68.42120 120 68.43120 2 Disc Holder 820.039 3 Disc Holder 820.040 Minidisc offers all the benefits of a conventional flap disc outperforming quick change sanding discs by up to 20 to 1. Premium zirconium grain Grind and finish in one operation Use with ROLOC style disc holder -2-8
Coated Abrasives 2 ABRASIVE FLAP DISCS (continued) ADAPTER KIT 886.27.40 Adapts a 7/8 arbor hole to a /8-11 spindle SPANNER WRENCH 68.02 Use with Adapting Nuts # 68.01 ADAPTING NUTS (1 PAIR) 68.01 These adapting nuts are a general purpose system for mounting grinding products with 7/8 arbor holes regardless of thickness. This system is for use on any 4-1/2, or 7 right angle grinder with a /8-11 threaded spindle. ABRASIVE FLAP WHEELS MOUNTED FLAP WHEELS (D x W) Grit max. safe free speed (RPM) 1-/8 x 1/4 60 2,000 68.2012 1-/8 x 1/4 120 2,000 68.2013 1 x 1 40 30,000 68.2002 1 x 1 60 30,000 68.2003 1 x 1 80 30,000 68.2004 1 x 1 120 30,000 68.200 MOUNTED FLAP WHEELS Grit Max RPM 1 x 1 x 1/4 60 30,000 68.1003 1 x 1 x 1/4 80 30,000 68.1004 1 x 1 x 1/4 120 30,000 68.100 2 x 1 x 1/4 60 2,000 68.101 2 x 1 x 1/4 80 2,000 68.1016 2 x 1 x 1/4 120 2,000 68.1017 3 x 1 x 1/4 60 23,000 68.1027 3 x 1 x 1/4 80 23,000 68.1028 3 x 1 x 1/4 120 23,000 68.1029 Premium quality AO flap wheel made with a flexible x-wt. cotton backing for faster cut rate vs. traditional AO flap wheels. Flexible, yet strong flaps for easy working on hard-to-reach places. Fast and cool cutting actions. Use on ferrous and non-ferrous metals. 1 x 1 180 30,000 68.2007 1-1/2 x 1 60 2,000 68.2009 1-1/2 x 1 80 2,000 68.2010 1-1/2 x 1 120 2,000 68.2011 2 x 1 60 2,000 68.201 2 x 1 80 2,000 68.2016 2 x 1 120 2,000 68.2017 2 x 1 180 2,000 68.2014 3 x 1 60 23,000 68.2027 2-1/2 x 1-1/2 60 20,000 68.2018 2-1/2 x 1-1/2 80 20,000 68.2019 2-1/2 x 1-1/2 120 20,000 68.2020 MINI FLAP WHEELS Grit Max RPM 3/4 x 3/8 x 1/8 60 38,000 68.0000 3/4 x 3/8 x 1/8 80 38,000 68.0001 3/4 x 3/8 x 1/8 120 38,000 68.0002 3/4 x 3/8 x 1/8 180 38,000 68.0003 3/4 x 3/8 x 1/8 240 38,000 68.0004 3/4 x 3/8 x 1/8 320 38,000 68.000 Quality aluminum oxide grain with X-flex backing Use on stainless steel, steel, alloyed steel, nonferrous materials, aluminum, titanium, and glass. 3 x 1 80 23,000 68.2028 3 x 1 120 23,000 68.2029 3x2 40 20,000 68.2040 3 x 2 60 20,000 68.2030 3 x 2 80 20,000 68.2031 3 x 2 120 20,000 68.2032 Firm, quality aluminum oxide coated abrasive material. The flaps, arranged like a fan around the shaft of the tool, provide for consistent cutting action, maximum performance and long life. Use on all ferrous and non-ferrous materials, stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass. Excellent for working in small, difficult to reach places. CGW flap wheels have more flaps compared to leading flap wheel manufacturers. THREADED FLAP WHEELS 1/4-20 THREADED STEM ALUMINUM OXIDE Grit Max RPM 10 Pc Bulk Pack 1 x 1 x 1/4-20 80 30,000 68.2603 68.2603.1 2 x 1 x 1/4-20 80 2,000 68.2613 68.2613.1 3 x 1 x 1/4-20 80 20,000 68.2623 68.2623.1 Adapter for 1/4-20 Flap Wheels 68.2600-2-9
2 Coated Abrasives ABRASIVE PORTABLE BELTS ABRASIVE BELTS Grit 3/8 x 13 36 898.7008 3/8 x 13 60 898.7009 3/8 x 13 120 898.70062 1/2 x 18 36 898.7000 1/2 x 18 0 898.7001 1/2 x 18 60 898.7002 1/2 x 18 80 898.7003 1/2 x 18 120 898.7004 2 x 36 40 898.70303 3 x 21 60 898.702 Grit 3 x 21 80 898.7026 3 x 24 60 898.7049 3 x 24 80 898.700 3 x 24 120 898.702 4 x 24 60 898.70741 4 x 24 80 898.70742 4 x 24 120 898.70744 6 x 48 60 898.70993 6 x 48 80 898.70994 6 x 48 120 898.70996 Aluminum oxide X-weight cloth backing Use for general purpose sanding and finishing of metals and wood CUBITRON II FILE BELTS 1/2 x 18 Abrasive Belts Qty per Box 36 Grit 10 898.72000 60 Grit 10 898.72001 80 Grit 10 898.72002 Contains precision-shaped abrasive grain, coated on a heavy duty backing. Resin bonded for heat resistance. Coated with a dry grinding aid to help reduce heat build up and cut faster. ABRASIVE CARTRIDGE ROLLS CARTRIDGE ROLLS (STRAIGHT) Grit 1/4x1x1/8 40 68.3100 1/4x1x1/8 80 68.3102 1/4x1x1/8 120 68.3104 1/4x1-1/2x1/8 40 68.3107 1/4x1-1/2x1/8 80 68.3109 1/4x1-1/2x1/8 120 68.3111 3/8x1x1/8 40 68.3128 3/8x1x1/8 80 68.3130 3/8x1-1/2x1/8 40 68.313 3/8x1-1/2x1/8 80 68.3137 3/8x1-1/2x1/8 120 68.3139 1/2x2x1/4 40 68.3140 1/2x2x1/4 80 68.3141 1/2x2x1/4 120 68.3142 Aluminum oxide Multi-layer design, long lasting Ideal for flash removal, blending, deburring, and polishing CARTRIDGE ROLLS MANDRELS Pilot Diameter Pilot Length Shank Diameter Shank Length 1/8 3/4 1/8 1 68.3080 1/8 1 1/8 1 68.3081 1/4 1 1/4 1 68.3084 1/4 1-1/2 1/4 1 68.308 Recommended pilot length for mandrels: For any cartridge roll 1 in length, use 3/4 pilot length For any cartridge roll 1-1/2 in length, use 1 pilot length ABRASIVE SPIRAL BANDS SPIRAL BANDS Grit 3/4 x 1 40 898.834140 3/4 x 1 80 898.834180 3/4 x 1 120 898.8341120 3/4 x 1 Rubber Expanding Drum 898.8341 1 x 1 40 898.8140 1 x 1 80 898.8180 1 x 1 120 898.81120 1 x 1 Rubber Expanding Drum 898.81 Aluminum oxide Two-ply cloth bands Ideal for edge finishing and deburring Rubber Expanding Drums have 1/4 shanks Grit 1-1/2 x 1-1/2 40 898.811240 1-1/2 x 1-1/2 80 898.811280 1-1/2 x 1-1/2 120 898.8112120 1-1/2 x 1-1/2 Rubber Expanding Drum 898.8112 2 x 1 40 898.82140 2 x 1 80 898.82180 2 x 1 120 898.821120 2 x 1 Rubber Expanding Drum 898.821-2-10
Bonded Abrasives 3 ABRASIVE COMBINATION CUTTING & GRINDING WHEELS COMBO GRINDING & CUTTING WHEELS Dia. X Thickness X Arbor Hole Brand Type 4-1/2 x 1/8 x 7/8 Duo Disc PFERD 27 886.27.36 4-1/2 x 1/8 x /8-11 Duo Disc PFERD 27 886.27.38 4-1/2 x /64 x 7/8 A46 METABO 27 886.8777 x /64 x 7/8 A46 METABO 27 886.87761 6 x /64 x 7/8 A46 METABO 27 886.87762 x 1/8 x 7/8 Duo Disc PFERD 27 886.27.37 x 1/8 x /8-11 Duo Disc PFERD 27 886.27.39 Cutting, deburring, light grinding without changing wheels Combination abrasive wheel is a cost-efficient and technically advanced solution Suitable for both cutting and grinding of Steel and Stainless Steel CUT-OFF WHEELS MINI MINI TYPE 1 CUT-OFF WHEELS Dia. X Thickness X Arbor Hole Bulk Pkg. Qty Bulk Pkg. 2" x.040 x 3/8 A 60-TZ 886.87708 2" x.03 x 3/8 A 60-TZ 886.87711 3" x.040 x 1/4 A 60-TZ 886.87721 100 886.87721.1 3" x 1/16 x 1/4 A 60-TZ 886.8772 3" x 1/16 x 3/8 A 36-TZ 886.60300 100 886.60300.1 3" x 1/16 x 1/4 A 36-TZ 886.60301 100 886.60301.1 3" x 1/8 x 3/8 A 36-XL 886.60303 0 886.60303.1 3" x.040 x 3/8 A 60-TZ 886.60304 100 886.60304.1 3" x 1/16 x 3/8 A 60-TZ 886.603099 4" x.040 x 1/4 A 60-TZ 886.87738 4" x 1/16 x 1/4 A 36-TZ 886.87739 4" x.040 x 3/8 A 60-TZ 886.87742 0 886.87742.1 4" x 1/16 x 3/8 A 36-TZ 886.87743 100 886.87743.1 4" x 1/16 x /8 A 36-TZ 886.87744 100 886.87744.1 4" X.040 X /8 A 60-TZ 886.8774 MINI TYPE 1 CUT-OFF WHEELS Dia. X Thickness X Arbor Hole 3" x 1/32" x 1/4" ZA-60 886.700 3" x 1/32" x 3/8" ZA-60 886.701 3" x 1/16" x 1/4" ZA-36 886.702 3" x 1/16" x 3/8" ZA-36 886.703 4" x 1/32" x 1/4" ZA-60 886.704 4" x 1/32" x 3/8" ZA-60 886.70 4" x 1/16" x 3/8" ZA-36 886.706 4" x 1/16" x 1/4" ZA-36 886.707 Premium Type 1 cut-off wheel for Metal, steel, and stainless. Longer lasting life and easy cutting action. Premium Zirconia Aluminum Made in USA GREEN CORPS CUT-OFF WHEELS Pkg Qty 3 x 1/32 x 3/8 01131-01989 820.01989 3 x 1/16 x 3/8 01131-01990 820.01990 3 x 3/16 x 3/8 01131-01991 820.01991 High performance, long life Cut-Off Wheel used for cutting autobody sheet metal, frame rails, clamps and rusted bolts 3/16 width wheel is ideal for cutting spot welds For use on utility type Cut-Off tools Sold in packages of wheels MINI TYPE 1 CUT-OFF WHEELS Dia. X Thickness Bulk Pkg. grade part no. X Arbor Hole 3"X1/32"X3/8" A60 886.87713 886.87713.1 Aluminum Oxide Max RPM 23,900 Made in USA A 60 TZ- - - - Aluminum oxide wheel for steel and other ferrous metals. Extremely fast rate of cut. Good wheel life. A 36 TZ- - - - Aluminum oxide wheel for steel and other ferrous metals. Fast rate of cut. Longer wheel life. A 46 TZ- - - -Aluminum oxide general purpose wheel for steel and other ferrous metals. Aggressive cut. Excellent wheel life. A 60 XL- - - -Engineered aluminum oxide wheel for long life in tough applications: thin wall pipe/tube, as well as solids. A36 XLZ- - - - Engineered aluminum oxide wheel for long life in tough applications: thin wall pipe/tube, as well as solids. SHOP PRO MINI TYPE 1 ALUMINUM CUT-OFF WHEELS 3"x.03" x 3/8" AL60 886.720 3"x 1/16" x 3/8" AL46 886.721 4"x.03"x 3/8" AL60 886.723 4"x 1/16"x3/8" AL46 886.724 Use on non ferrous metal - Aluminum, Brass, and Copper Special formulation to prevent loading. MOUNTING MANDRELS FOR TYPE 1 WHEELS Arbor Shank 1/4 1/4 886.87700 3/8 1/4 886.87701 1/4 & 3/8 1/4 821.07-3-1
3 Bonded Abrasives ABRASIVE CUT-OFF WHEELS TYPE1 ALUMINUM CUT-OFF WHEEL 4-1/2"x.040"x7/8" AL46 886.740 "x.040"x7/8" AL46 886.741 6"x.040"x7/8" AL46 886.742 Use on non ferrous metal - Aluminum, Brass, and Copper Special formulation to prevent loading. TYPE 1 CUT-OFF 4-1/2"x.040"x7/8" 60T 886.70 "x.040"x7/8" 60T 886.71 6"x.040"x7/8" 60T 886.72 Main Application - Stainless Steel and high tensile alloys. Contaminant- free cutting of stainless steel. No iron, sulfur or chlorine. Made in USA TYPE 1 AIR AND ELECTRIC CUT-OFF SAW WHEELS Bulk Bulk Pkg. Qty 4-1/2" x.04" x 7/8" A60TX 886.87747** 4-1/2" x.040" x 7/8" A60TZ 886.87748 4-1/2 x.04 x 7/8 A60XL 886.87749 100 886.87749.1 " x 3/32" x 7/8" A30R 886.8772** " x.04" x 7/8" A60XL 886.8771 10 886.8771.1 6" x.040" x /8" A60TZ 886.8774 6" x.040" x 7/8" A60TZ 886.877 100 886.877.1 6" x.04" x 7/8" A60TX 886.8776** 7" x 1/8" x /8" A36S 886.87760 ** Has Metal Ring Around the Arbor TYPE 27 ALUMINUM CUT-OFF 4"x.040" x /8" AL46 886.730 4-1/2"x.040"x7/8" AL46 886.731 "x.040"x7/8" AL46 886.732 6"x.040"x7/8" AL46 886.733 Use on non ferrous metal - Aluminum, Brass, and Copper Special formulation to prevent loading. TYPE 27 DEPRESSED CENTER CUT-OFF WHEELS Dia. X Thickness X Arbor Hole 4 x.04 x /8 ZA60S 886.2.49 4-1/2 x 3/32 x 7/8 A36S 886.27.18 4-1/2 x 1/8 x 7/8 A24T 886.27.1 4-1/2 x 3/32 x /8-11 A36S 886.27.19 4-1/2 x 1/8 x /8-11 A24T 886.27.160 4-1/2 x.04 x /8-11 A60-T 886.27.164 4-1/2 x.04 x 7/8 ZA60S 886.27.16 x 3/32 x /8-11 A30S 886.27.4 x.040 x 7/8 ZA60S 886.8778 x.04 x 7/8 ZA60S 886.8779 x.00 x 7/8 ZA60S 886.27.96 6 x.04 x 7/8 ZA60S 886.87716 6 x.04 x /8-11 WA60-T 886.87763 ** Has Threaded Arbor Hole TYPE 27 DEPRESSED CENTER CUT-OFF WHEELS Dia. X Thickness X Arbor Hole " X 1/8" X /8-11" A30S 886.27.206** 6x.04x/8-11 A46S 886.27.210 6" X.04" X 7/8" A46S 886.27.201 6" X 1/8" X 7/8" A24S 886.27.202 6" X 1/8" X /8-11" A30S 886.27.207** 7" X.04" X 7/8" A46S 886.27.203 7" X 1/8" X 7/8" A24S 886.27.20 7" X 1/8" X /8-11" A24S 886.27.208** 9" X 1/8" X 7/8" A24S 886.27.204 9" X 1/8" X /8-11" A24S 886.27.209** ** Has Threaded Arbor Hole CHOP SAW WHEELS 7 x 1/8 x /8 A30S 886.60321 14 x 3/32 x 1 A30S 886.60314 14 x 3/32 x 1 A30R 886.6031 14 x 1/8 x 1 AC 24 R 886.60313 14 x 7/64 x 1 A30R 886.3. 16 x /32 x 1 A24M 886.60312 A 24 M - - - - Aluminum oxide wheels for general purpose use on steel and other ferrous metals larger chop saw applications. Excellent rate of cut. Good wheel life. A 30 P - - - -Aluminum oxide wheels constructed with a single internal reinforcement and an aggressive cool cutting formulation best for cutting smaller diameter metals or metal studs. A 30 R - - - - Aluminum oxide wheels for general purpose use on steel and other ferrous metals. Good rate of cut. Good wheel life. A 30 S - - - - Aluminum oxide wheels specially formulated for dry wall stud applications. Good rate of cut. Good wheel life. AC 24 R - - - Aluminum oxide and Silicon carbide combination wheel specially formulated for ductile iron. Excellent rate of cut. Excellent wheel life. Smooth and chatter free cutting. PORTABLE/STATIONARY CUT-OFF WHEELS 12 x 1/8 x 1 A24N 886.60311 12 x 1/8 x 20mm A24N 886.603110 14 x 1/8 x 1 A24N 886.60312 14 x 1/8 x 20MM A24N 886.603120 14 x 1/8 x 20MM C24N 886.603121 14 x 3/16 x 1 A24R 886.60318-3-2 A 24 N - - - - Aluminum oxide wheels general purpose for steel and other ferrous metals. Fast rate of cut. Good wheel life A 30 S - - - - Aluminum oxide wheels for steel, other ferrous metals and rail track. Good rate of cut. Longer wheel life. C 16 N - - - - Silicon carbide specially formulated for asphalt and green concrete. Good cutting rate. Good wheel life. C 24 N - - - - Silicon carbide general purpose wheel for stone, concrete, cast iron, ductile iron, masonry materials, non-ferrous metals, brass, bronze, plastic, etc. Fast rate of cut. Good wheel life. AC 24 R - - - Aluminum oxide and Silicon carbide combination wheel specially formulated for ductile iron. Excellent rate of cut. Excellent wheel life. Smooth and chatter free cutting.
Bonded Abrasives 3 STAINLESS STEEL Dia. x Thick x Arbor Grit 4 x 1/8 x /8 36 886.27.960 4 x 1/8 x /8 60 886.27.962 4-1/2 x 1/8 x 7/8 36 886.27.966 4-1/2 x 1/8 x 7/8 60 886.27.968 4-1/2 x 1/8 x 7/8 80 886.27.970 4-1/2 x 1/8 x /8-11 36 886.27.972 4-1/2 x 1/8 x /8-11 60 886.27.974 4-1/2 x 1/8 x /8-11 80 886.27.976 CC-GRIND-SOLID GRINDING DISC STEEL STAINLESS STEEL Dia x Arbor 4-1/2 x 7/8 886.27.991 4-1/2 x /8-11 886.27.992 7 x 7/8 886.27.993 7 x /8-11 886.27.994 GRINDING WHEELS TYPE 27 FLEXIBLE Dia x Arbor METAL Grit Dia. x Thick x Arbor 4-1/2 x 1/8 x 7/8 36 886.27.980 Pearl Abrasives Type 27 Flexible Grinding Wheels (Flextron) combine the advantages of depressed center wheels and resin fiber discs. Its design properties allow for flexibility when grinding, shaping, blending and finishing. Maximum life Aggressive Grinding Designed for superior performance on stainless steel Use on ferrous and non-ferrous metals 4-1/2 x 7/8 886.27.99 4-1/2 x /8-11 886.27.996 7 x 7/8 886.27.997 7 x /8-11 886.27.998 CC-GRIND-SOLID for rough grinding applications 40% more productivity due to ultimate stock removal rates compared with reinforced grinding wheels 0% less noise and vibration during use As tough and safe as a reinforced grinding wheel and 100% increased aggressiveness Maximum RPM For 4-1/2 is 13,300 Maximum RPM For 7 is 8,00 GRINDING WHEELS TYPE 27 GRINDING WHEELS TYPE 27 Description Dia. x Thick Bulk Bulk Pack x Arbor Hole* Pkg. Qty ZA 24-T 4 x 1/4 x /8 886.27. ZA 24-T 4-1/2 x 1/4 x 7/8 886.27.12 A36-O 4-1/2 x 1/4 x 7/8 886.4.278 0 886.4.278.11 ZA 24-T 4-1/2 x 1/4 x /8-11* 886.27.1 A36O x 1/4 x 7/8 886.27.18 10 886.27.18.1 A24-T 7 x 1/4 x 7/8 886.27.20 ZA 24-T 7 x 1/4 x /8-11* 886.27.2 ZA 24-T 9 x 1/4 x /8-11* 886.27.3 A36-O 9 x 1/4 x /8-11* 886.9.2811 A24-R 4 x 3/32 x /8** 886.27.10 A24-R 4 x 1/4 x /8 886.27.12 A30-R 4-1/2 x 3/32 x /8-11* 886.27.19 A30-R 4-1/2 x 3/32 x 7/8 886.27.18 A60-TZ 4-1/2 x.04 x 7/8 886.27.16 A24-R 4-1/2 x 1/4 x 7/8 886.27.4 A24-R 4-1/2 x 1/4 x /8-11* 886.27.0 A30-R x 3/32 x /8-11* 886.27.4 A24-R 7 x 1/4 x 7/8 886.27. 10 886.27..1 A24-R 7 x 1/4 x /8-11* 886.27.60 C24N 7x1/4x/8-11 886.27.71 A24-R 9 x 1/4 x /8-11* 886.27.7 A24-N 4-1/2 x 1/4 x 7/8 886.27.46 A24-N 4-1/2 x 1/4 x /8-11* 886.27.2 A24-N 6 x 1/4 x 7/8 886.27.3 A24-N 7 x 1/4 x /8-11* 886.27.6 A36-M 4-1/2 x 1/4 x 7/8 886.27.80 A36-M 4-1/2 x 1/4 x /8-11* 886.27.81 A24-M 7 x 1/4 x /8-11* 886.27.8 ZA 24-T 4-1/2 x 1/4 x 7/8 886.27.9 A46-U x.04 x 7/8 886.27.96 10 886.27.96.1 Arbor Adapter 7/8 to /8-11* 886.27.40 * /8-11 have metal hubs with threaded arbor holes ** used for cutting, not grinding A 24-N - - - - Aluminum oxide general purpose wheel for grinding steel and other ferrous metals in normal working conditions. High stock removal. Good wheel life. A 24-R - - - - Aluminum oxide general purpose wheel for heavier working conditions for steel and other ferrous metals. Good stock removal. Longer wheel life. A 24-T- - - - - Aluminum oxide general purpose wheel for steel and other ferrous metals. Extremely long wheel life. A 36-O - - - - Aluminum oxide wheel specially formulated for harder metals such as stainless steel. Good stock removal. Good wheel life. ZA 24-T- - - - Zirconia alumina wheels for steel and stainless steel applications. Very aggressive stock removal. Extremely long wheel life. A 36-M - - - - Aluminum oxide wheel formulated for aluminum grinding applications. Good stock removal. Good wheel life. Non clogging capability. C 24-N - - - - Silicon carbide general purpose wheel for stone, concrete, cast iron, ductile iron, masonry materials, non- ferrous metals, brass, bronze, etc. High stock removal. Good wheel life. GRINDING WHEELS BENCH GRINDER Dia. x Thick x Arbor Hole Grit 6 x 3/4 x 1 24 coarse 886.87001 6 x 3/4 x 1 36 med 886.87002 6 x 3/4 x 1 46 med 886.87003 6 x 3/4 x 1 60 med 886.87004 6 x 3/4 x 1 80 fine 886.8700 6 x 1 x 1 24 coarse 886.87006 6 x 1 x 1 36 med 886.87007 6 x 1 x 1 46 med 886.87008 6 x 1 x 1 60 med 886.87009 6 x 1 x 1 80 fine 886.87010 7 x 1 x 1 36 med 886.87012 7 x 1 x 1 46 med 886.87013 7 x 1 x 1 60 med 886.87014 8 x 1 x 1-1/4 24 coarse 886.87016 8 x 1 x 1-1/4 36 med 886.87017 8 x 1 x 1-1/4 46 med 886.87018 8 x 1 x 1-1/4 60 med 886.87019 8 x 1 x 1-1/4 80 fine 886.87020 10 x 1 x 1-1/4 GC80 886.10.87021 10 x 1 x 1-1/4 24 coarse 886.87021 10 x 1 x 1-1/4 36 med 886.87022 10 x 1 x 1-1/4 46 med 886.87023 10 x 1 x 1-1/4 60 med 886.87024 Wheel Diameter Arbor Adaptors Supplied 6 1/2, /8, 3/4 7 1/2, /8, 3/4 8 1/2, /8, 3/4 10 3/4, 1 BENCH GRINDING WHEEL ADAPTERS Description 1 to 1/2, 3/4 wide 886.87040 1 to 1/2, 1 wide 886.87041 Aluminum Oxide wheels for general purpose metal grinding Wheels come with arbor adaptors refer to chart on the right. Green Silion Carbide for non ferrous metals, tungsten carbide for sharpening carbide tools in tool rooms -3-3